linux-stable.git/drivers/pci, branch linux-3.13.y Linux kernel stable tree PCI: Enable INTx in pci_reenable_device() only when MSI/MSI-X not enabled 2014-04-22T23:49:20+00:00 Bjorn Helgaas bhelgaas@google.com 2014-03-07T23:06:05+00:00 16d36cdf2bd2b8e821ea1286dd3e8b2d657e6b3c commit 866d54177b4e671cd52bed1fb487d140d7b691f5 upstream. Andreas reported that after 1f42db786b14 ("PCI: Enable INTx if BIOS left them disabled"), pciehp surprise removal stopped working. This happens because pci_reenable_device() on the hotplug bridge (used in the pciehp_configure_device() path) clears the Interrupt Disable bit, which apparently breaks the bridge's MSI hotplug event reporting. Previously we cleared the Interrupt Disable bit in do_pci_enable_device(), which is used by both pci_enable_device() and pci_reenable_device(). But we use pci_reenable_device() after the driver may have enabled MSI or MSI-X, and we *set* Interrupt Disable as part of enabling MSI/MSI-X. This patch clears Interrupt Disable only when MSI/MSI-X has not been enabled. Fixes: 1f42db786b14 PCI: Enable INTx if BIOS left them disabled Link: https://bugzilla.kernel.org/show_bug.cgi?id=71691 Reported-and-tested-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 866d54177b4e671cd52bed1fb487d140d7b691f5 upstream.

Andreas reported that after 1f42db786b14 ("PCI: Enable INTx if BIOS left
them disabled"), pciehp surprise removal stopped working.

This happens because pci_reenable_device() on the hotplug bridge (used in
the pciehp_configure_device() path) clears the Interrupt Disable bit, which
apparently breaks the bridge's MSI hotplug event reporting.

Previously we cleared the Interrupt Disable bit in do_pci_enable_device(),
which is used by both pci_enable_device() and pci_reenable_device().  But
we use pci_reenable_device() after the driver may have enabled MSI or
MSI-X, and we *set* Interrupt Disable as part of enabling MSI/MSI-X.

This patch clears Interrupt Disable only when MSI/MSI-X has not been
enabled.

Fixes: 1f42db786b14 PCI: Enable INTx if BIOS left them disabled
Link: https://bugzilla.kernel.org/show_bug.cgi?id=71691
Reported-and-tested-by: Andreas Noever <andreas.noever@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI: designware: Fix iATU programming for cfg1, io and mem viewport 2014-04-22T23:49:20+00:00 Mohit Kumar mohit.kumar@st.com 2014-04-16T16:23:34+00:00 4fa62956a8707dafb9e41921a5b266e8da179586 commit 017fcdc30cdae18c0946eef1ece1f14b4c7897ba upstream. This patch corrects iATU programming for cfg1, io and mem viewport. Enable ATU only after configuring it. Signed-off-by: Mohit Kumar <mohit.kumar@st.com> Signed-off-by: Ajay Khandelwal <ajay.khandelwal@st.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 017fcdc30cdae18c0946eef1ece1f14b4c7897ba upstream.

This patch corrects iATU programming for cfg1, io and mem viewport.  Enable
ATU only after configuring it.

Signed-off-by: Mohit Kumar <mohit.kumar@st.com>
Signed-off-by: Ajay Khandelwal <ajay.khandelwal@st.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI: designware: Fix RC BAR to be single 64-bit non-prefetchable memory BAR 2014-04-22T23:49:20+00:00 Mohit Kumar mohit.kumar@st.com 2014-02-19T12:04:35+00:00 7f4029f92cc1f31a57908308c8bc513681f1c1f1 commit dbffdd6862e67d60703f2df66c558bf448f81d6e upstream. The Synopsys PCIe core provides one pair of 32-bit BARs (BAR 0 and BAR 1). The BARs can be configured as follows: - One 64-bit BAR: BARs 0 and 1 are combined to form a single 64-bit BAR - Two 32-bit BARs: BARs 0 and 1 are two independent 32-bit BARs This patch corrects 64-bit, non-prefetchable memory BAR configuration implemented in dw driver. Signed-off-by: Mohit Kumar <mohit.kumar@st.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Pratyush Anand <pratyush.anand@st.com> Cc: Jingoo Han <jg1.han@samsung.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit dbffdd6862e67d60703f2df66c558bf448f81d6e upstream.

The Synopsys PCIe core provides one pair of 32-bit BARs (BAR 0 and BAR 1).
The BARs can be configured as follows:

  - One 64-bit BAR: BARs 0 and 1 are combined to form a single 64-bit BAR
  - Two 32-bit BARs: BARs 0 and 1 are two independent 32-bit BARs

This patch corrects 64-bit, non-prefetchable memory BAR configuration
implemented in dw driver.

Signed-off-by: Mohit Kumar <mohit.kumar@st.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Pratyush Anand <pratyush.anand@st.com>
Cc: Jingoo Han <jg1.han@samsung.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI: Enable INTx in pci_reenable_device() only when MSI/MSI-X not enabled 2014-03-24T04:44:16+00:00 Bjorn Helgaas bhelgaas@google.com 2014-03-11T20:22:19+00:00 bb7048ea362773c2b53ee410a69ff60a029c71ef commit 3cdeb713dc66057b50682048c151eae07b186c42 upstream. Andreas reported that after 1f42db786b14 ("PCI: Enable INTx if BIOS left them disabled"), pciehp surprise removal stopped working. This happens because pci_reenable_device() on the hotplug bridge (used in the pciehp_configure_device() path) clears the Interrupt Disable bit, which apparently breaks the bridge's MSI hotplug event reporting. Previously we cleared the Interrupt Disable bit in do_pci_enable_device(), which is used by both pci_enable_device() and pci_reenable_device(). But we use pci_reenable_device() after the driver may have enabled MSI or MSI-X, and we *set* Interrupt Disable as part of enabling MSI/MSI-X. This patch clears Interrupt Disable only when MSI/MSI-X has not been enabled. Fixes: 1f42db786b14 PCI: Enable INTx if BIOS left them disabled Link: https://bugzilla.kernel.org/show_bug.cgi?id=71691 Reported-and-tested-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 3cdeb713dc66057b50682048c151eae07b186c42 upstream.

Andreas reported that after 1f42db786b14 ("PCI: Enable INTx if BIOS left
them disabled"), pciehp surprise removal stopped working.

This happens because pci_reenable_device() on the hotplug bridge (used in
the pciehp_configure_device() path) clears the Interrupt Disable bit, which
apparently breaks the bridge's MSI hotplug event reporting.

Previously we cleared the Interrupt Disable bit in do_pci_enable_device(),
which is used by both pci_enable_device() and pci_reenable_device().  But
we use pci_reenable_device() after the driver may have enabled MSI or
MSI-X, and we *set* Interrupt Disable as part of enabling MSI/MSI-X.

This patch clears Interrupt Disable only when MSI/MSI-X has not been
enabled.

Fixes: 1f42db786b14 PCI: Enable INTx if BIOS left them disabled
Link: https://bugzilla.kernel.org/show_bug.cgi?id=71691
Reported-and-tested-by: Andreas Noever <andreas.noever@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI: Enable INTx if BIOS left them disabled 2014-03-07T06:06:22+00:00 Bjorn Helgaas bhelgaas@google.com 2014-02-14T20:48:16+00:00 3404ec304327ac92e8da2fd250c5aa7a81229fde commit 1f42db786b14a31bf807fc41ee5583a00c08fcb1 upstream. Some firmware leaves the Interrupt Disable bit set even if the device uses INTx interrupts. Clear Interrupt Disable so we get those interrupts. Based on the report mentioned below, if the user selects the "EHCI only" option in the Intel Baytrail BIOS, the EHCI device is handed off to the OS with the PCI_COMMAND_INTX_DISABLE bit set. Link: http://lkml.kernel.org/r/20140114181721.GC12126@xanatos Link: https://bugzilla.kernel.org/show_bug.cgi?id=70601 Reported-by: Chris Cheng <chris.cheng@atrustcorp.com> Reported-and-tested-by: Jamie Chen <jamie.chen@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 1f42db786b14a31bf807fc41ee5583a00c08fcb1 upstream.

Some firmware leaves the Interrupt Disable bit set even if the device uses
INTx interrupts.  Clear Interrupt Disable so we get those interrupts.

Based on the report mentioned below, if the user selects the "EHCI only"
option in the Intel Baytrail BIOS, the EHCI device is handed off to the OS
with the PCI_COMMAND_INTX_DISABLE bit set.

Link: http://lkml.kernel.org/r/20140114181721.GC12126@xanatos
Link: https://bugzilla.kernel.org/show_bug.cgi?id=70601
Reported-by: Chris Cheng <chris.cheng@atrustcorp.com>
Reported-and-tested-by: Jamie Chen <jamie.chen@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI: mvebu: Use Device ID and revision from underlying endpoint 2014-03-07T06:06:22+00:00 Andrew Lunn andrew@lunn.ch 2014-02-05T10:55:49+00:00 9984691beb0578d1211bb9b22292ea00789f9f5c commit 322a8e91844f4ae2093e0d3d8a318d0ef2596756 upstream. Marvell SoCs place the SoC number into the PCIe endpoint device ID. The SoC stepping is placed into the PCIe revision. The old plat-orion PCIe driver allowed this information to be seen in user space with a simple lspci command. The new driver places a virtual PCI-PCI bridge on top of these endpoints. It has its own hard coded PCI device ID. Thus it is no longer possible to see what the SoC is using lspci. When initializing the PCI-PCI bridge, set its device ID and revision from the underlying endpoint, thus restoring this functionality. Debian would like to use this in order to aid installing the correct DTB file. Fixes: 45361a4fe4464 ("pci: PCIe driver for Marvell Armada 370/XP systems") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 322a8e91844f4ae2093e0d3d8a318d0ef2596756 upstream.

Marvell SoCs place the SoC number into the PCIe endpoint device ID.  The
SoC stepping is placed into the PCIe revision. The old plat-orion PCIe
driver allowed this information to be seen in user space with a simple
lspci command.

The new driver places a virtual PCI-PCI bridge on top of these endpoints.
It has its own hard coded PCI device ID. Thus it is no longer possible to
see what the SoC is using lspci.

When initializing the PCI-PCI bridge, set its device ID and revision from
the underlying endpoint, thus restoring this functionality.  Debian would
like to use this in order to aid installing the correct DTB file.

Fixes: 45361a4fe4464 ("pci: PCIe driver for Marvell Armada 370/XP systems")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ACPI / hotplug / PCI: Relax the checking of _STA return values 2014-02-22T21:34:57+00:00 Mika Westerberg mika.westerberg@linux.intel.com 2014-02-11T10:42:37+00:00 f7e3b4563a05f5e1354cb7e1de9d356e76d059e4 commit 7282059489868e0ed1b0d79765730c6b233a8399 upstream. The ACPI specification (ACPI 5.0A, Section 6.3.7) says: _STA may return bit 0 clear (not present) with bit 3 set (device is functional). This case is used to indicate a valid device for which no device driver should be loaded (for example, a bridge device.) Children of this device may be present and valid. OSPM should continue enumeration below a device whose _STA returns this bit combination. Evidently, some BIOSes follow that and return 0x0A from _STA, which causes problems to happen when they trigger bus check or device check notifications for those devices too. Namely, ACPIPHP thinks that they are gone and may drop them, for example, if such a notification is triggered during a resume from system suspend. To fix that, modify ACPICA to regard devies as present and functioning if _STA returns both the ACPI_STA_DEVICE_ENABLED and ACPI_STA_DEVICE_FUNCTIONING bits set for them. Reported-and-tested-by: Peter Wu <lekensteyn@gmail.com> [rjw: Subject and changelog, minor code modifications] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 7282059489868e0ed1b0d79765730c6b233a8399 upstream.

The ACPI specification (ACPI 5.0A, Section 6.3.7) says:

 _STA may return bit 0 clear (not present) with bit 3 set (device is
 functional). This case is used to indicate a valid device for which
 no device driver should be loaded (for example, a bridge device.)
 Children of this device may be present and valid. OSPM should
 continue enumeration below a device whose _STA returns this bit
 combination.

Evidently, some BIOSes follow that and return 0x0A from _STA, which
causes problems to happen when they trigger bus check or device check
notifications for those devices too.  Namely, ACPIPHP thinks that they
are gone and may drop them, for example, if such a notification is
triggered during a resume from system suspend.

To fix that, modify ACPICA to regard devies as present and
functioning if _STA returns both the ACPI_STA_DEVICE_ENABLED
and ACPI_STA_DEVICE_FUNCTIONING bits set for them.

Reported-and-tested-by: Peter Wu <lekensteyn@gmail.com>
[rjw: Subject and changelog, minor code modifications]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xen/pvhvm: If xen_platform_pci=0 is set don't blow up (v4). 2014-02-13T21:55:28+00:00 Konrad Rzeszutek Wilk konrad.wilk@oracle.com 2013-11-26T20:05:40+00:00 4aa9ed1bb666cbf55ce5b67926f2ef4a1713ffcb commit 51c71a3bbaca868043cc45b3ad3786dd48a90235 upstream. The user has the option of disabling the platform driver: 00:02.0 Unassigned class [ff80]: XenSource, Inc. Xen Platform Device (rev 01) which is used to unplug the emulated drivers (IDE, Realtek 8169, etc) and allow the PV drivers to take over. If the user wishes to disable that they can set: xen_platform_pci=0 (in the guest config file) or xen_emul_unplug=never (on the Linux command line) except it does not work properly. The PV drivers still try to load and since the Xen platform driver is not run - and it has not initialized the grant tables, most of the PV drivers stumble upon: input: Xen Virtual Keyboard as /devices/virtual/input/input5 input: Xen Virtual Pointer as /devices/virtual/input/input6M ------------[ cut here ]------------ kernel BUG at /home/konrad/ssd/konrad/linux/drivers/xen/grant-table.c:1206! invalid opcode: 0000 [#1] SMP Modules linked in: xen_kbdfront(+) xenfs xen_privcmd CPU: 6 PID: 1389 Comm: modprobe Not tainted 3.13.0-rc1upstream-00021-ga6c892b-dirty #1 Hardware name: Xen HVM domU, BIOS 4.4-unstable 11/26/2013 RIP: 0010:[<ffffffff813ddc40>] [<ffffffff813ddc40>] get_free_entries+0x2e0/0x300 Call Trace: [<ffffffff8150d9a3>] ? evdev_connect+0x1e3/0x240 [<ffffffff813ddd0e>] gnttab_grant_foreign_access+0x2e/0x70 [<ffffffffa0010081>] xenkbd_connect_backend+0x41/0x290 [xen_kbdfront] [<ffffffffa0010a12>] xenkbd_probe+0x2f2/0x324 [xen_kbdfront] [<ffffffff813e5757>] xenbus_dev_probe+0x77/0x130 [<ffffffff813e7217>] xenbus_frontend_dev_probe+0x47/0x50 [<ffffffff8145e9a9>] driver_probe_device+0x89/0x230 [<ffffffff8145ebeb>] __driver_attach+0x9b/0xa0 [<ffffffff8145eb50>] ? driver_probe_device+0x230/0x230 [<ffffffff8145eb50>] ? driver_probe_device+0x230/0x230 [<ffffffff8145cf1c>] bus_for_each_dev+0x8c/0xb0 [<ffffffff8145e7d9>] driver_attach+0x19/0x20 [<ffffffff8145e260>] bus_add_driver+0x1a0/0x220 [<ffffffff8145f1ff>] driver_register+0x5f/0xf0 [<ffffffff813e55c5>] xenbus_register_driver_common+0x15/0x20 [<ffffffff813e76b3>] xenbus_register_frontend+0x23/0x40 [<ffffffffa0015000>] ? 0xffffffffa0014fff [<ffffffffa001502b>] xenkbd_init+0x2b/0x1000 [xen_kbdfront] [<ffffffff81002049>] do_one_initcall+0x49/0x170 .. snip.. which is hardly nice. This patch fixes this by having each PV driver check for: - if running in PV, then it is fine to execute (as that is their native environment). - if running in HVM, check if user wanted 'xen_emul_unplug=never', in which case bail out and don't load any PV drivers. - if running in HVM, and if PCI device 5853:0001 (xen_platform_pci) does not exist, then bail out and not load PV drivers. - (v2) if running in HVM, and if the user wanted 'xen_emul_unplug=ide-disks', then bail out for all PV devices _except_ the block one. Ditto for the network one ('nics'). - (v2) if running in HVM, and if the user wanted 'xen_emul_unplug=unnecessary' then load block PV driver, and also setup the legacy IDE paths. In (v3) make it actually load PV drivers. Reported-by: Sander Eikelenboom <linux@eikelenboom.it Reported-by: Anthony PERARD <anthony.perard@citrix.com> Reported-and-Tested-by: Fabio Fantoni <fabio.fantoni@m2r.biz> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [v2: Add extra logic to handle the myrid ways 'xen_emul_unplug' can be used per Ian and Stefano suggestion] [v3: Make the unnecessary case work properly] [v4: s/disks/ide-disks/ spotted by Fabio] Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> [for PCI parts] Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 51c71a3bbaca868043cc45b3ad3786dd48a90235 upstream.

The user has the option of disabling the platform driver:
00:02.0 Unassigned class [ff80]: XenSource, Inc. Xen Platform Device (rev 01)

which is used to unplug the emulated drivers (IDE, Realtek 8169, etc)
and allow the PV drivers to take over. If the user wishes
to disable that they can set:

  xen_platform_pci=0
  (in the guest config file)

or
  xen_emul_unplug=never
  (on the Linux command line)

except it does not work properly. The PV drivers still try to
load and since the Xen platform driver is not run - and it
has not initialized the grant tables, most of the PV drivers
stumble upon:

input: Xen Virtual Keyboard as /devices/virtual/input/input5
input: Xen Virtual Pointer as /devices/virtual/input/input6M
------------[ cut here ]------------
kernel BUG at /home/konrad/ssd/konrad/linux/drivers/xen/grant-table.c:1206!
invalid opcode: 0000 [#1] SMP
Modules linked in: xen_kbdfront(+) xenfs xen_privcmd
CPU: 6 PID: 1389 Comm: modprobe Not tainted 3.13.0-rc1upstream-00021-ga6c892b-dirty #1
Hardware name: Xen HVM domU, BIOS 4.4-unstable 11/26/2013
RIP: 0010:[<ffffffff813ddc40>]  [<ffffffff813ddc40>] get_free_entries+0x2e0/0x300
Call Trace:
 [<ffffffff8150d9a3>] ? evdev_connect+0x1e3/0x240
 [<ffffffff813ddd0e>] gnttab_grant_foreign_access+0x2e/0x70
 [<ffffffffa0010081>] xenkbd_connect_backend+0x41/0x290 [xen_kbdfront]
 [<ffffffffa0010a12>] xenkbd_probe+0x2f2/0x324 [xen_kbdfront]
 [<ffffffff813e5757>] xenbus_dev_probe+0x77/0x130
 [<ffffffff813e7217>] xenbus_frontend_dev_probe+0x47/0x50
 [<ffffffff8145e9a9>] driver_probe_device+0x89/0x230
 [<ffffffff8145ebeb>] __driver_attach+0x9b/0xa0
 [<ffffffff8145eb50>] ? driver_probe_device+0x230/0x230
 [<ffffffff8145eb50>] ? driver_probe_device+0x230/0x230
 [<ffffffff8145cf1c>] bus_for_each_dev+0x8c/0xb0
 [<ffffffff8145e7d9>] driver_attach+0x19/0x20
 [<ffffffff8145e260>] bus_add_driver+0x1a0/0x220
 [<ffffffff8145f1ff>] driver_register+0x5f/0xf0
 [<ffffffff813e55c5>] xenbus_register_driver_common+0x15/0x20
 [<ffffffff813e76b3>] xenbus_register_frontend+0x23/0x40
 [<ffffffffa0015000>] ? 0xffffffffa0014fff
 [<ffffffffa001502b>] xenkbd_init+0x2b/0x1000 [xen_kbdfront]
 [<ffffffff81002049>] do_one_initcall+0x49/0x170

.. snip..

which is hardly nice. This patch fixes this by having each
PV driver check for:
 - if running in PV, then it is fine to execute (as that is their
   native environment).
 - if running in HVM, check if user wanted 'xen_emul_unplug=never',
   in which case bail out and don't load any PV drivers.
 - if running in HVM, and if PCI device 5853:0001 (xen_platform_pci)
   does not exist, then bail out and not load PV drivers.
 - (v2) if running in HVM, and if the user wanted 'xen_emul_unplug=ide-disks',
   then bail out for all PV devices _except_ the block one.
   Ditto for the network one ('nics').
 - (v2) if running in HVM, and if the user wanted 'xen_emul_unplug=unnecessary'
   then load block PV driver, and also setup the legacy IDE paths.
   In (v3) make it actually load PV drivers.

Reported-by: Sander Eikelenboom <linux@eikelenboom.it
Reported-by: Anthony PERARD <anthony.perard@citrix.com>
Reported-and-Tested-by: Fabio Fantoni <fabio.fantoni@m2r.biz>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
[v2: Add extra logic to handle the myrid ways 'xen_emul_unplug'
can be used per Ian and Stefano suggestion]
[v3: Make the unnecessary case work properly]
[v4: s/disks/ide-disks/ spotted by Fabio]
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> [for PCI parts]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge branches 'acpi-pci-pm' and 'acpi-pci-hotplug' 2013-12-31T21:03:37+00:00 Rafael J. Wysocki rafael.j.wysocki@intel.com 2013-12-31T21:03:37+00:00 4706515a9284d8bcef4dab53e4568c38a02a09c7 * acpi-pci-pm: PCI / ACPI: Install wakeup notify handlers for all PCI devs with ACPI * acpi-pci-hotplug: ACPIPHP / radeon / nouveau: Fix VGA switcheroo problem related to hotplug ACPI / PCI / hotplug: Avoid warning when _ADR not present 
* acpi-pci-pm:
  PCI / ACPI: Install wakeup notify handlers for all PCI devs with ACPI

* acpi-pci-hotplug:
  ACPIPHP / radeon / nouveau: Fix VGA switcheroo problem related to hotplug
  ACPI / PCI / hotplug: Avoid warning when _ADR not present
ACPIPHP / radeon / nouveau: Fix VGA switcheroo problem related to hotplug 2013-12-31T12:39:42+00:00 Rafael J. Wysocki rafael.j.wysocki@intel.com 2013-12-31T12:39:42+00:00 f244d8b623dae7a7bc695b0336f67729b95a9736 The changes in the ACPI-based PCI hotplug (ACPIPHP) subsystem made during the 3.12 development cycle uncovered a problem with VGA switcheroo that on some systems, when the device-specific method (ATPX in the radeon case, _DSM in the nouveau case) is used to turn off the discrete graphics, the BIOS generates ACPI hotplug events for that device and those events cause ACPIPHP to attempt to remove the device from the system (they are events for a device that was present previously and is not present any more, so that's what should be done according to the spec). Then, the system stops functioning correctly. Since the hotplug events in question were simply silently ignored previously, the least intrusive way to address that problem is to make ACPIPHP ignore them again. For this purpose, introduce a new ACPI device flag, no_hotplug, and modify ACPIPHP to ignore hotplug events for PCI devices whose ACPI companions have that flag set. Next, make the radeon and nouveau switcheroo detection code set the no_hotplug flag for the discrete graphics' ACPI companion. Fixes: bbd34fcdd1b2 (ACPI / hotplug / PCI: Register all devices under the given bridge) References: https://bugzilla.kernel.org/show_bug.cgi?id=61891 References: https://bugzilla.kernel.org/show_bug.cgi?id=64891 Reported-and-tested-by: Mike Lothian <mike@fireburn.co.uk> Reported-and-tested-by: <madcatx@atlas.cz> Reported-and-tested-by: Joaquín Aramendía <samsagax@gmail.com> Cc: Alex Deucher <alexdeucher@gmail.com> Cc: Dave Airlie <airlied@linux.ie> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: 3.12+ <stable@vger.kernel.org> # 3.12+ 
The changes in the ACPI-based PCI hotplug (ACPIPHP) subsystem made
during the 3.12 development cycle uncovered a problem with VGA
switcheroo that on some systems, when the device-specific method
(ATPX in the radeon case, _DSM in the nouveau case) is used to turn
off the discrete graphics, the BIOS generates ACPI hotplug events for
that device and those events cause ACPIPHP to attempt to remove the
device from the system (they are events for a device that was present
previously and is not present any more, so that's what should be done
according to the spec).  Then, the system stops functioning correctly.

Since the hotplug events in question were simply silently ignored
previously, the least intrusive way to address that problem is to
make ACPIPHP ignore them again.  For this purpose, introduce a new
ACPI device flag, no_hotplug, and modify ACPIPHP to ignore hotplug
events for PCI devices whose ACPI companions have that flag set.
Next, make the radeon and nouveau switcheroo detection code set the
no_hotplug flag for the discrete graphics' ACPI companion.

Fixes: bbd34fcdd1b2 (ACPI / hotplug / PCI: Register all devices under the given bridge)
References: https://bugzilla.kernel.org/show_bug.cgi?id=61891
References: https://bugzilla.kernel.org/show_bug.cgi?id=64891
Reported-and-tested-by: Mike Lothian <mike@fireburn.co.uk>
Reported-and-tested-by: <madcatx@atlas.cz>
Reported-and-tested-by: Joaquín Aramendía <samsagax@gmail.com>
Cc: Alex Deucher <alexdeucher@gmail.com>
Cc: Dave Airlie <airlied@linux.ie>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: 3.12+ <stable@vger.kernel.org> # 3.12+