linux-stable.git/drivers/pci/remove.c, branch linux-4.9.y

PCI: Detach driver before procfs & sysfs teardown on device remove

2017-12-20T09:07:31+00:00

[ Upstream commit 16b6c8bb687cc3bec914de09061fcb8411951fda ]

When removing a device, for example a VF being removed due to SR-IOV
teardown, a "soft" hot-unplug via 'echo 1 > remove' in sysfs, or an actual
hot-unplug, we first remove the procfs and sysfs attributes for the device
before attempting to release the device from any driver bound to it.
Unbinding the driver from the device can take time.  The device might need
to write out data or it might be actively in use.  If it's in use by
userspace through a vfio driver, the unbind might block until the user
releases the device.  This leads to a potentially non-trivial amount of
time where the device exists, but we've torn down the interfaces that
userspace uses to examine devices, for instance lspci might generate this
sort of error:

  pcilib: Cannot open /sys/bus/pci/devices/0000:01:0a.3/config
  lspci: Unable to read the standard configuration space header of device 0000:01:0a.3

We don't seem to have any dependence on this teardown ordering in the
kernel, so let's unbind the driver first, which is also more symmetric with
the instantiation of the device in pci_bus_add_device().

Signed-off-by: Alex Williamson 
Signed-off-by: Bjorn Helgaas 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

PCI: Fix bridge_d3 update on device removal

2016-09-13T21:00:18+00:00

Starting with v4.8, we allow a PCIe port to runtime suspend to D3hot if the
port itself and its children satisfy a number of conditions.  Once a child
is removed, we recheck those conditions in case the removed device was
blocking the port from suspending.

The rechecking needs to happen *after* the device has been removed from the
bus it resides on.  Otherwise when walking the port's subordinate bus in
pci_bridge_d3_update(), the device being removed would erroneously still be
taken into account.

However the device is removed from the bus_list in pci_destroy_dev() and we
currently recheck *before* that.  Fix it.

Fixes: 9d26d3a8f1b0 ("PCI: Put PCIe ports into D3 during suspend")
Signed-off-by: Lukas Wunner 
Signed-off-by: Bjorn Helgaas 
Reviewed-by: Mika Westerberg 
Acked-by: Rafael J. Wysocki

PCI: Put PCIe ports into D3 during suspend

2016-06-13T19:57:36+00:00

Currently the Linux PCI core does not touch power state of PCI bridges and
PCIe ports when system suspend is entered.  Leaving them in D0 consumes
power unnecessarily and may prevent the CPU from entering deeper C-states.

With recent PCIe hardware we can power down the ports to save power given
that we take into account few restrictions:

  - The PCIe port hardware is recent enough, starting from 2015.

  - Devices connected to PCIe ports are effectively in D3cold once the port
    is transitioned to D3 (the config space is not accessible anymore and
    the link may be powered down).

  - Devices behind the PCIe port need to be allowed to transition to D3cold
    and back.  There is a way both drivers and userspace can forbid this.

  - If the device behind the PCIe port is capable of waking the system it
    needs to be able to do so from D3cold.

This patch adds a new flag to struct pci_device called 'bridge_d3'.  This
flag is set and cleared by the PCI core whenever there is a change in power
management state of any of the devices behind the PCIe port.  When system
later on is suspended we only need to check this flag and if it is true
transition the port to D3 otherwise we leave it in D0.

Also provide override mechanism via command line parameter
"pcie_port_pm=[off|force]" that can be used to disable or enable the
feature regardless of the BIOS manufacturing date.

Tested-by: Lukas Wunner 
Signed-off-by: Mika Westerberg 
Signed-off-by: Bjorn Helgaas 
Acked-by: Rafael J. Wysocki

Merge branch 'pci/resource' into next

2016-03-15T13:56:28+00:00

* pci/resource:
  PCI: Simplify pci_create_attr() control flow
  PCI: Don't leak memory if sysfs_create_bin_file() fails
  PCI: Simplify sysfs ROM cleanup
  PCI: Remove unused IORESOURCE_ROM_COPY and IORESOURCE_ROM_BIOS_COPY
  MIPS: Loongson 3: Keep CPU physical (not virtual) addresses in shadow ROM resource
  MIPS: Loongson 3: Use temporary struct resource * to avoid repetition
  ia64/PCI: Keep CPU physical (not virtual) addresses in shadow ROM resource
  ia64/PCI: Use ioremap() instead of open-coded equivalent
  ia64/PCI: Use temporary struct resource * to avoid repetition
  PCI: Clean up pci_map_rom() whitespace
  PCI: Remove arch-specific IORESOURCE_ROM_SHADOW size from sysfs
  PCI: Set ROM shadow location in arch code, not in PCI core
  PCI: Don't enable/disable ROM BAR if we're using a RAM shadow copy
  PCI: Don't assign or reassign immutable resources
  PCI: Mark shadow copy of VGA ROM as IORESOURCE_PCI_FIXED
  x86/PCI: Mark Broadwell-EP Home Agent & PCU as having non-compliant BARs
  PCI: Disable IO/MEM decoding for devices with non-compliant BARs

PCI: Remove unused IORESOURCE_ROM_COPY and IORESOURCE_ROM_BIOS_COPY

2016-03-12T12:00:29+00:00

The IORESOURCE_ROM_COPY and IORESOURCE_ROM_BIOS_COPY bits are unused.
Remove them and code that depends on them.

Signed-off-by: Bjorn Helgaas

PCI: Add pci_ops.{add,remove}_bus() callbacks

2016-03-08T21:40:37+00:00

Add pci_ops.{add,remove}_bus() callbacks, which will be called on every
newly created bus and when a bus is being removed, respectively.  This can
be used by drivers to implement driver-specific initialization and teardown
of the bus, in addition to the architecture-specifics implemented by the
pcibios_add_bus() and the pcibios_remove_bus() functions.

Signed-off-by: Thierry Reding 
Signed-off-by: Bjorn Helgaas

PCI: Export symbols required for loadable host driver modules

2015-04-08T19:17:10+00:00

Export the following symbols so they can be referenced by a PCI host bridge
driver compiled as a kernel loadable module:

  pci_common_swizzle
  pci_create_root_bus
  pci_stop_root_bus
  pci_remove_root_bus
  pci_assign_unassigned_bus_resources
  pci_fixup_irqs

Signed-off-by: Ray Jui 
Signed-off-by: Bjorn Helgaas 
Acked-by: Arnd Bergmann

Revert "PCI: Remove from bus_list and release resources in pci_release_dev()"

2014-02-01T18:24:31+00:00

Revert commit ef83b0781a73 "PCI: Remove from bus_list and release
resources in pci_release_dev()" that made some nasty race conditions
become possible.  For example, if a Thunderbolt link is unplugged
and then replugged immediately, the pci_release_dev() resulting from
the hot-remove code path may be racing with the hot-add code path
which after that commit causes various kinds of breakage to happen
(up to and including a hard crash of the whole system).

Moreover, the problem that commit ef83b0781a73 attempted to address
cannot happen any more after commit 8a4c5c329de7 "PCI: Check parent
kobject in pci_destroy_dev()", because pci_destroy_dev() will now
return immediately if it has already been executed for the given
device.

Note, however, that the invocation of msi_remove_pci_irq_vectors()
removed by commit ef83b0781a73 from pci_free_resources() along with
the other changes made by it is not added back because of subsequent
code changes depending on that modification.

Fixes: ef83b0781a73 (PCI: Remove from bus_list and release resources in pci_release_dev())
Reported-by: Mika Westerberg 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Linus Torvalds

PCI: Check parent kobject in pci_destroy_dev()

2014-01-15T17:34:13+00:00

If pci_stop_and_remove_bus_device() is run concurrently for a device and
its parent bridge via remove_callback(), both code paths attempt to acquire
pci_rescan_remove_lock.  If the child device removal acquires it first,
there will be no problems.  However, if the parent bridge removal acquires
it first, it will eventually execute pci_destroy_dev() for the child
device, but that device object will not be freed yet due to the reference
held by the concurrent child removal.  Consequently, both
pci_stop_bus_device() and pci_remove_bus_device() will be executed for that
device unnecessarily and pci_destroy_dev() will see a corrupted list head
in that object.  Moreover, an excess put_device() will be executed for that
device in that case which may lead to a use-after-free in the final
kobject_put() done by sysfs_schedule_callback_work().

To avoid that problem, make pci_destroy_dev() check if the device's parent
kobject is NULL, which only happens after device_del() has already run for
it.  Make pci_destroy_dev() return immediately whithout doing anything in
that case.

Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Bjorn Helgaas

PCI: Add global pci_lock_rescan_remove()

2014-01-14T00:49:49+00:00

There are multiple PCI device addition and removal code paths that may be
run concurrently with the generic PCI bus rescan and device removal that
can be triggered via sysfs.  If that happens, it may lead to multiple
different, potentially dangerous race conditions.

The most straightforward way to address those problems is to run
the code in question under the same lock that is used by the
generic rescan/remove code in pci-sysfs.c.  To prepare for those
changes, move the definition of the global PCI remove/rescan lock
to probe.c and provide global wrappers, pci_lock_rescan_remove()
and pci_unlock_rescan_remove(), allowing drivers to manipulate
that lock.  Also provide pci_stop_and_remove_bus_device_locked()
for the callers of pci_stop_and_remove_bus_device() who only need
to hold the rescan/remove lock around it.

Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Bjorn Helgaas