linux-stable.git/drivers/pci/hotplug, branch v5.3 Linux kernel stable tree Merge tag 'pci-v5.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci 2019-05-14T17:30:10+00:00 Linus Torvalds torvalds@linux-foundation.org 2019-05-14T17:30:10+00:00 414147d99b928c574ed76e9374a5d2cb77866a29 Pull PCI updates from Bjorn Helgaas: "Enumeration changes: - Add _HPX Type 3 settings support, which gives firmware more influence over device configuration (Alexandru Gagniuc) - Support fixed bus numbers from bridge Enhanced Allocation capabilities (Subbaraya Sundeep) - Add "external-facing" DT property to identify cases where we require IOMMU protection against untrusted devices (Jean-Philippe Brucker) - Enable PCIe services for host controller drivers that use managed host bridge alloc (Jean-Philippe Brucker) - Log PCIe port service messages with pci_dev, not the pcie_device (Frederick Lawler) - Convert pciehp from pciehp_debug module parameter to generic dynamic debug (Frederick Lawler) Peer-to-peer DMA: - Add whitelist of Root Complexes that support peer-to-peer DMA between Root Ports (Christian König) Native controller drivers: - Add PCI host bridge DMA ranges for bridges that can't DMA everywhere, e.g., iProc (Srinath Mannam) - Add Amazon Annapurna Labs PCIe host controller driver (Jonathan Chocron) - Fix Tegra MSI target allocation so DMA doesn't generate unwanted MSIs (Vidya Sagar) - Fix of_node reference leaks (Wen Yang) - Fix Hyper-V module unload & device removal issues (Dexuan Cui) - Cleanup R-Car driver (Marek Vasut) - Cleanup Keystone driver (Kishon Vijay Abraham I) - Cleanup i.MX6 driver (Andrey Smirnov) Significant bug fixes: - Reset Lenovo ThinkPad P50 GPU so nouveau works after reboot (Lyude Paul) - Fix Switchtec firmware update performance issue (Wesley Sheng) - Work around Pericom switch link retraining erratum (Stefan Mätje)" * tag 'pci-v5.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (141 commits) MAINTAINERS: Add Karthikeyan Mitran and Hou Zhiqiang for Mobiveil PCI PCI: pciehp: Remove pointless MY_NAME definition PCI: pciehp: Remove pointless PCIE_MODULE_NAME definition PCI: pciehp: Remove unused dbg/err/info/warn() wrappers PCI: pciehp: Log messages with pci_dev, not pcie_device PCI: pciehp: Replace pciehp_debug module param with dyndbg PCI: pciehp: Remove pciehp_debug uses PCI/AER: Log messages with pci_dev, not pcie_device PCI/DPC: Log messages with pci_dev, not pcie_device PCI/PME: Replace dev_printk(KERN_DEBUG) with dev_info() PCI/AER: Replace dev_printk(KERN_DEBUG) with dev_info() PCI: Replace dev_printk(KERN_DEBUG) with dev_info(), etc PCI: Replace printk(KERN_INFO) with pr_info(), etc PCI: Use dev_printk() when possible PCI: Cleanup setup-bus.c comments and whitespace PCI: imx6: Allow asynchronous probing PCI: dwc: Save root bus for driver remove hooks PCI: dwc: Use devm_pci_alloc_host_bridge() to simplify code PCI: dwc: Free MSI in dw_pcie_host_init() error path PCI: dwc: Free MSI IRQ page in dw_pcie_free_msi() ... 
Pull PCI updates from Bjorn Helgaas:
 "Enumeration changes:

   - Add _HPX Type 3 settings support, which gives firmware more
     influence over device configuration (Alexandru Gagniuc)

   - Support fixed bus numbers from bridge Enhanced Allocation
     capabilities (Subbaraya Sundeep)

   - Add "external-facing" DT property to identify cases where we
     require IOMMU protection against untrusted devices (Jean-Philippe
     Brucker)

   - Enable PCIe services for host controller drivers that use managed
     host bridge alloc (Jean-Philippe Brucker)

   - Log PCIe port service messages with pci_dev, not the pcie_device
     (Frederick Lawler)

   - Convert pciehp from pciehp_debug module parameter to generic
     dynamic debug (Frederick Lawler)

  Peer-to-peer DMA:

   - Add whitelist of Root Complexes that support peer-to-peer DMA
     between Root Ports (Christian König)

  Native controller drivers:

   - Add PCI host bridge DMA ranges for bridges that can't DMA
     everywhere, e.g., iProc (Srinath Mannam)

   - Add Amazon Annapurna Labs PCIe host controller driver (Jonathan
     Chocron)

   - Fix Tegra MSI target allocation so DMA doesn't generate unwanted
     MSIs (Vidya Sagar)

   - Fix of_node reference leaks (Wen Yang)

   - Fix Hyper-V module unload & device removal issues (Dexuan Cui)

   - Cleanup R-Car driver (Marek Vasut)

   - Cleanup Keystone driver (Kishon Vijay Abraham I)

   - Cleanup i.MX6 driver (Andrey Smirnov)

  Significant bug fixes:

   - Reset Lenovo ThinkPad P50 GPU so nouveau works after reboot (Lyude
     Paul)

   - Fix Switchtec firmware update performance issue (Wesley Sheng)

   - Work around Pericom switch link retraining erratum (Stefan Mätje)"

* tag 'pci-v5.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (141 commits)
  MAINTAINERS: Add Karthikeyan Mitran and Hou Zhiqiang for Mobiveil PCI
  PCI: pciehp: Remove pointless MY_NAME definition
  PCI: pciehp: Remove pointless PCIE_MODULE_NAME definition
  PCI: pciehp: Remove unused dbg/err/info/warn() wrappers
  PCI: pciehp: Log messages with pci_dev, not pcie_device
  PCI: pciehp: Replace pciehp_debug module param with dyndbg
  PCI: pciehp: Remove pciehp_debug uses
  PCI/AER: Log messages with pci_dev, not pcie_device
  PCI/DPC: Log messages with pci_dev, not pcie_device
  PCI/PME: Replace dev_printk(KERN_DEBUG) with dev_info()
  PCI/AER: Replace dev_printk(KERN_DEBUG) with dev_info()
  PCI: Replace dev_printk(KERN_DEBUG) with dev_info(), etc
  PCI: Replace printk(KERN_INFO) with pr_info(), etc
  PCI: Use dev_printk() when possible
  PCI: Cleanup setup-bus.c comments and whitespace
  PCI: imx6: Allow asynchronous probing
  PCI: dwc: Save root bus for driver remove hooks
  PCI: dwc: Use devm_pci_alloc_host_bridge() to simplify code
  PCI: dwc: Free MSI in dw_pcie_host_init() error path
  PCI: dwc: Free MSI IRQ page in dw_pcie_free_msi()
  ...
Merge branch 'pci/printk-portdrv' 2019-05-13T23:34:47+00:00 Bjorn Helgaas bhelgaas@google.com 2019-05-13T23:34:47+00:00 f8587c80c62a65c004ee838275351814b52c428c - Change some desirable KERN_DEBUG messages to KERN_INFO/KERN_ERR (Frederick Lawler) - Log PCIe port service messages with pci_dev, not the pcie_device (Frederick Lawler) - Convert pciehp from pciehp_debug module parameter to generic dynamic debug (Frederick Lawler) * pci/printk-portdrv: PCI: pciehp: Remove pointless MY_NAME definition PCI: pciehp: Remove pointless PCIE_MODULE_NAME definition PCI: pciehp: Remove unused dbg/err/info/warn() wrappers PCI: pciehp: Log messages with pci_dev, not pcie_device PCI: pciehp: Replace pciehp_debug module param with dyndbg PCI: pciehp: Remove pciehp_debug uses PCI/AER: Log messages with pci_dev, not pcie_device PCI/DPC: Log messages with pci_dev, not pcie_device PCI/PME: Replace dev_printk(KERN_DEBUG) with dev_info() PCI/AER: Replace dev_printk(KERN_DEBUG) with dev_info() 
  - Change some desirable KERN_DEBUG messages to KERN_INFO/KERN_ERR
    (Frederick Lawler)

  - Log PCIe port service messages with pci_dev, not the pcie_device
    (Frederick Lawler)

  - Convert pciehp from pciehp_debug module parameter to generic dynamic
    debug (Frederick Lawler)

* pci/printk-portdrv:
  PCI: pciehp: Remove pointless MY_NAME definition
  PCI: pciehp: Remove pointless PCIE_MODULE_NAME definition
  PCI: pciehp: Remove unused dbg/err/info/warn() wrappers
  PCI: pciehp: Log messages with pci_dev, not pcie_device
  PCI: pciehp: Replace pciehp_debug module param with dyndbg
  PCI: pciehp: Remove pciehp_debug uses
  PCI/AER: Log messages with pci_dev, not pcie_device
  PCI/DPC: Log messages with pci_dev, not pcie_device
  PCI/PME: Replace dev_printk(KERN_DEBUG) with dev_info()
  PCI/AER: Replace dev_printk(KERN_DEBUG) with dev_info()
PCI: pciehp: Remove pointless MY_NAME definition 2019-05-09T21:45:21+00:00 Bjorn Helgaas bhelgaas@google.com 2019-05-08T21:34:01+00:00 e07ca82a5fde88b5caf2b7025e97c7980c60abe1 MY_NAME is only used once and offers no benefit, so remove it. Link: https://lore.kernel.org/lkml/20190509141456.223614-11-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> 
MY_NAME is only used once and offers no benefit, so remove it.

Link: https://lore.kernel.org/lkml/20190509141456.223614-11-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
PCI: pciehp: Remove pointless PCIE_MODULE_NAME definition 2019-05-09T21:45:21+00:00 Bjorn Helgaas bhelgaas@google.com 2019-05-08T20:23:39+00:00 b498b6872da1143d67ed588d21d3c3c496a987ee PCIE_MODULE_NAME is only used once and offers no benefit, so remove it. Link: https://lore.kernel.org/lkml/20190509141456.223614-10-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> 
PCIE_MODULE_NAME is only used once and offers no benefit, so remove it.

Link: https://lore.kernel.org/lkml/20190509141456.223614-10-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
PCI: pciehp: Remove unused dbg/err/info/warn() wrappers 2019-05-09T21:45:20+00:00 Frederick Lawler fred@fredlawl.com 2019-05-07T23:24:53+00:00 742ee16bc31f42b034a9b3b01731fd6dc20d0b19 Replace the last uses of dbg() with the equivalent pr_debug(), then remove unused dbg(), err(), info(), and warn() wrappers. Link: https://lore.kernel.org/lkml/20190509141456.223614-9-helgaas@kernel.org Signed-off-by: Frederick Lawler <fred@fredlawl.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> 
Replace the last uses of dbg() with the equivalent pr_debug(), then remove
unused dbg(), err(), info(), and warn() wrappers.

Link: https://lore.kernel.org/lkml/20190509141456.223614-9-helgaas@kernel.org
Signed-off-by: Frederick Lawler <fred@fredlawl.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
PCI: pciehp: Log messages with pci_dev, not pcie_device 2019-05-09T21:45:20+00:00 Frederick Lawler fred@fredlawl.com 2019-05-07T23:24:51+00:00 94dbc9562edc745d0549f1744ca1bd75e644473e Log messages with pci_dev, not pcie_device. Factor out common message prefixes with dev_fmt(). Example output change: - pciehp 0000:00:06.0:pcie004: Slot(0) Powering on due to button press + pcieport 0000:00:06.0: pciehp: Slot(0) Powering on due to button press Link: https://lore.kernel.org/lkml/20190509141456.223614-8-helgaas@kernel.org Signed-off-by: Frederick Lawler <fred@fredlawl.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> 
Log messages with pci_dev, not pcie_device.  Factor out common message
prefixes with dev_fmt().

Example output change:

  - pciehp 0000:00:06.0:pcie004: Slot(0) Powering on due to button press
  + pcieport 0000:00:06.0: pciehp: Slot(0) Powering on due to button press

Link: https://lore.kernel.org/lkml/20190509141456.223614-8-helgaas@kernel.org
Signed-off-by: Frederick Lawler <fred@fredlawl.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
PCI: pciehp: Replace pciehp_debug module param with dyndbg 2019-05-09T21:45:20+00:00 Frederick Lawler fred@fredlawl.com 2019-05-07T23:24:52+00:00 017124725c155a3e1b09429d27c5846b0efafa89 Previously pciehp debug messages were enabled by the pciehp_debug module parameter, e.g., by booting with this kernel command line option: pciehp.pciehp_debug=1 Convert this mechanism to use the generic dynamic debug (dyndbg) feature. After this commit, pciehp debug messages are enabled by building the kernel with CONFIG_DYNAMIC_DEBUG=y and booting with this command line option: dyndbg="file pciehp* +p" The dyndbg facility is much more flexible: messages can be enabled at boot- or run-time based on the file name, function name, line number, message test, etc. See Documentation/admin-guide/dynamic-debug-howto.rst for more details. Link: https://lore.kernel.org/lkml/20190509141456.223614-7-helgaas@kernel.org Signed-off-by: Frederick Lawler <fred@fredlawl.com> [bhelgaas: commit log, comment, remove pciehp_debug parameter] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> 
Previously pciehp debug messages were enabled by the pciehp_debug module
parameter, e.g., by booting with this kernel command line option:

  pciehp.pciehp_debug=1

Convert this mechanism to use the generic dynamic debug (dyndbg) feature.
After this commit, pciehp debug messages are enabled by building the kernel
with CONFIG_DYNAMIC_DEBUG=y and booting with this command line option:

  dyndbg="file pciehp* +p"

The dyndbg facility is much more flexible: messages can be enabled at boot-
or run-time based on the file name, function name, line number, message
test, etc.  See Documentation/admin-guide/dynamic-debug-howto.rst for more
details.

Link: https://lore.kernel.org/lkml/20190509141456.223614-7-helgaas@kernel.org
Signed-off-by: Frederick Lawler <fred@fredlawl.com>
[bhelgaas: commit log, comment, remove pciehp_debug parameter]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
PCI: pciehp: Remove pciehp_debug uses 2019-05-09T21:45:19+00:00 Bjorn Helgaas bhelgaas@google.com 2019-05-08T19:59:00+00:00 7e696b8ae9a7f939584284a12eec3b7c62123836 We're about to convert pciehp to the dyndbg mechanism, which means we can eventually remove pciehp_debug. Replace uses of pciehp_debug with dbg() and ctrl_dbg(), which check pciehp_debug internally. Link: https://lore.kernel.org/lkml/20190509141456.223614-6-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> 
We're about to convert pciehp to the dyndbg mechanism, which means we can
eventually remove pciehp_debug.

Replace uses of pciehp_debug with dbg() and ctrl_dbg(), which check
pciehp_debug internally.

Link: https://lore.kernel.org/lkml/20190509141456.223614-6-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
PCI: rpaphp: Get/put device node reference during slot alloc/dealloc 2019-04-10T21:07:12+00:00 Tyrel Datwyler tyreld@linux.vnet.ibm.com 2019-03-22T18:27:22+00:00 91800660bbe9d4ae7791f0e646e5736180f01fc0 When allocating the slot structure we store a pointer to the associated device_node. We really should be incrementing the reference count, so add an of_node_get() during slot alloc and an of_node_put() during slot dealloc. Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> 
When allocating the slot structure we store a pointer to the associated
device_node.  We really should be incrementing the reference count, so add
an of_node_get() during slot alloc and an of_node_put() during slot
dealloc.

Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
PCI: rpadlpar: Fix leaked device_node references in add/remove paths 2019-04-10T21:07:12+00:00 Tyrel Datwyler tyreld@linux.vnet.ibm.com 2019-03-22T18:27:21+00:00 fb26228bfc4ce3951544848555c0278e2832e618 The find_dlpar_node() helper returns a device node with its reference incremented. Both the add and remove paths use this helper for find the appropriate node, but fail to release the reference when done. Annotate the find_dlpar_node() helper with a comment about the incremented reference count and call of_node_put() on the obtained device_node in the add and remove paths. Also, fixup a reference leak in the find_vio_slot() helper where we fail to call of_node_put() on the vdevice node after we iterate over its children. Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> 
The find_dlpar_node() helper returns a device node with its reference
incremented.  Both the add and remove paths use this helper for find the
appropriate node, but fail to release the reference when done.

Annotate the find_dlpar_node() helper with a comment about the incremented
reference count and call of_node_put() on the obtained device_node in the
add and remove paths.  Also, fixup a reference leak in the find_vio_slot()
helper where we fail to call of_node_put() on the vdevice node after we
iterate over its children.

Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>