commit d433889cd5a0933fbd90f1e65bff5a8d7963cc52 upstream.

When we warned about a timeout on a hotplug command, we previously printed
the time between calls to pcie_write_cmd(), without accounting for any time
spent actually waiting.  Consider this sequence:

  pcie_write_cmd
    write SLTCTL
    cmd_started = jiffies          # T1

  pcie_write_cmd
    pcie_wait_cmd
      now = jiffies                # T2
      wait_event_timeout           # we may wait here
      if (timeout)
        ctrl_info("Timeout on command issued %u msec ago",
                  jiffies_to_msecs(now - cmd_started))

We previously printed (T2 - T1), but that doesn't include the time spent in
wait_event_timeout().

Fix this by using the current jiffies value, not the one cached before
calling wait_event_timeout().

[bhelgaas: changelog, use current jiffies instead of adding timeout]
Fixes: 40b960831cfa ("PCI: pciehp: Compute timeout from hotplug command start time")
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pcie_poll_cmd() take msecs instead of jiffies, so convert timeout to msecs.

Fixes: 40b960831cfa ("PCI: pciehp: Compute timeout from hotplug command start time")
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

* pci/vga:
  vgaarb: Drop obsolete #ifndef
  vgaarb: Don't default exclusively to first video device with mem+io

* commit '6a73336bde29':
  PCI: Remove "no hotplug settings from platform" warning

We print way too many messages like this:

    pci 0000:00:00.0: no hotplug settings from platform
    pci 0000:00:00.0: using default PCI settings

This usually happens when the platform doesn't supply an ACPI _HPP method,
but the method is optional, so there's no point in warning about it.

Not only are the messages useless, but we call pci_configure_slot() far too
many times, so they're repeated many times.  I'll fix the overuse of
pci_configure_slot() too, but that will wait until the next merge window.

For now, just remove both log messages.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=84391
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>

Powering off a hot-pluggable device, e.g., with pci_set_power_state(D3cold),
normally generates a hot-remove event that unbinds the driver.

Some drivers expect to remain bound to a device even while they power it
off and back on again.  This can be dangerous, because if the device is
removed or replaced while it is powered off, the driver doesn't know that
anything changed.  But some drivers accept that risk.

Add pci_ignore_hotplug() for use by drivers that know their device cannot
be removed.  Using pci_ignore_hotplug() tells the PCI core that hot-plug
events for the device should be ignored.

The radeon and nouveau drivers use this to switch between a low-power,
integrated GPU and a higher-power, higher-performance discrete GPU.  They
power off the unused GPU, but they want to remain bound to it.

This is a reimplementation of f244d8b623da ("ACPIPHP / radeon / nouveau:
Fix VGA switcheroo problem related to hotplug") but extends it to work with
both acpiphp and pciehp.

This fixes a problem where systems with dual GPUs using the radeon drivers
become unusable, freezing every few seconds (see bugzillas below).  The
resume of the radeon device may also fail, e.g.,

This fixes problems on dual GPU systems where the radeon driver becomes
unusable because of problems while suspending the device, as in bug 79701:

    [drm] radeon: finishing device.
    radeon 0000:01:00.0: Userspace still has active objects !
    radeon 0000:01:00.0: ffff8800cb4ec288 ffff8800cb4ec000 16384 4294967297 force free
    ...
    WARNING: CPU: 0 PID: 67 at /home/apw/COD/linux/drivers/gpu/drm/radeon/radeon_gart.c:234 radeon_gart_unbind+0xd2/0xe0 [radeon]()
    trying to unbind memory from uninitialized GART !

or while resuming it, as in bug 77261:

    radeon 0000:01:00.0: ring 0 stalled for more than 10158msec
    radeon 0000:01:00.0: GPU lockup ...
    radeon 0000:01:00.0: GPU pci config reset
    pciehp 0000:00:01.0:pcie04: Card not present on Slot(1-1)
    radeon 0000:01:00.0: GPU reset succeeded, trying to resume
    *ERROR* radeon: dpm resume failed
    radeon 0000:01:00.0: Wait for MC idle timedout !

Link: https://bugzilla.kernel.org/show_bug.cgi?id=77261
Link: https://bugzilla.kernel.org/show_bug.cgi?id=79701
Reported-by: Shawn Starr <shawn.starr@rogers.com>
Reported-by: Jose P. <lbdkmjdf@sharklasers.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Rajat Jain <rajatxjain@gmail.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Dave Airlie <airlied@redhat.com>
CC: stable@vger.kernel.org	# v3.15+

Pull device tree updates from Grant Likely:
 "The branch contains the following device tree changes the v3.17 merge
  window:

  Group changes to the device tree.  In preparation for adding device
  tree overlay support, OF_DYNAMIC is reworked so that a set of device
  tree changes can be prepared and applied to the tree all at once.
  OF_RECONFIG notifiers see the most significant change here so that
  users always get a consistent view of the tree.  Notifiers generation
  is moved from before a change to after it, and notifiers for a group
  of changes are emitted after the entire block of changes have been
  applied

  Automatic console selection from DT.  Console drivers can now use
  of_console_check() to see if the device node is specified as a console
  device.  If so then it gets added as a preferred console.  UART
  devices get this support automatically when uart_add_one_port() is
  called.

  DT unit tests no longer depend on pre-loaded data in the device tree.
  Data is loaded dynamically at the start of unit tests, and then
  unloaded again when the tests have completed.

  Also contains a few bugfixes for reserved regions and early memory
  setup"

* tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux: (21 commits)
  of: Fixing OF Selftest build error
  drivers: of: add automated assignment of reserved regions to client devices
  of: Use proper types for checking memory overflow
  of: typo fix in __of_prop_dup()
  Adding selftest testdata dynamically into live tree
  of: Add todo tasklist for Devicetree
  of: Transactional DT support.
  of: Reorder device tree changes and notifiers
  of: Move dynamic node fixups out of powerpc and into common code
  of: Make sure attached nodes don't carry along extra children
  of: Make devicetree sysfs update functions consistent.
  of: Create unlocked versions of node and property add/remove functions
  OF: Utility helper functions for dynamic nodes
  of: Move CONFIG_OF_DYNAMIC code into a separate file
  of: rename of_aliases_mutex to just of_mutex
  of/platform: Fix of_platform_device_destroy iteration of devices
  of: Migrate of_find_node_by_name() users to for_each_node_by_name()
  tty: Update hypervisor tty drivers to use core stdout parsing code.
  arm/versatile: Add the uart as the stdout device.
  of: Enable console on serial ports specified by /chosen/stdout-path
  ...

Pull s390 updates from Martin Schwidefsky:
 "Mostly cleanups and bug-fixes, with two exceptions.

  The first is lazy flushing of I/O-TLBs for PCI to improve performance,
  the second is software dirty bits in the pmd for the madvise-free
  implementation"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (24 commits)
  s390/locking: Reenable optimistic spinning
  s390/mm: implement dirty bits for large segment table entries
  KVM: s390/mm: Fix page table locking vs. split pmd lock
  s390/dasd: fix camel case
  s390/3215: fix hanging console issue
  s390/irq: improve displayed interrupt order in /proc/interrupts
  s390/seccomp: fix error return for filtered system calls
  s390/pci: introduce lazy IOTLB flushing for DMA unmap
  dasd: fix error recovery for alias devices during format
  dasd: fix list_del corruption during format
  dasd: fix unresponsive device during format
  dasd: use aliases for formatted devices during format
  s390/pci: fix kmsg component
  s390/kdump: Return NOTIFY_OK for all actions other than MEM_GOING_OFFLINE
  s390/watchdog: Fix module name in Kconfig help text
  s390/dasd: replace seq_printf by seq_puts
  s390/dasd: replace pr_warning by pr_warn
  s390/dasd: Move EXPORT_SYMBOL after function/variable
  s390/dasd: remove unnecessary null test before debugfs_remove
  s390/zfcp: use qdio buffer helpers
  ...

Pull ACPI and power management updates from Rafael Wysocki:
 "Again, ACPICA leads the pack (47 commits), followed by cpufreq (18
  commits) and system suspend/hibernation (9 commits).

  From the new code perspective, the ACPICA update brings ACPI 5.1 to
  the table, including a new device configuration object called _DSD
  (Device Specific Data) that will hopefully help us to operate device
  properties like Device Trees do (at least to some extent) and changes
  related to supporting ACPI on ARM.

  Apart from that we have hibernation changes making it use radix trees
  to store memory bitmaps which should speed up some operations carried
  out by it quite significantly.  We also have some power management
  changes related to suspend-to-idle (the "freeze" sleep state) support
  and more preliminary changes needed to support ACPI on ARM (outside of
  ACPICA).

  The rest is fixes and cleanups pretty much everywhere.

  Specifics:

   - ACPICA update to upstream version 20140724.  That includes ACPI 5.1
     material (support for the _CCA and _DSD predefined names, changes
     related to the DMAR and PCCT tables and ARM support among other
     things) and cleanups related to using ACPICA's header files.  A
     major part of it is related to acpidump and the core code used by
     that utility.  Changes from Bob Moore, David E Box, Lv Zheng,
     Sascha Wildner, Tomasz Nowicki, Hanjun Guo.

   - Radix trees for memory bitmaps used by the hibernation core from
     Joerg Roedel.

   - Support for waking up the system from suspend-to-idle (also known
     as the "freeze" sleep state) using ACPI-based PCI wakeup signaling
     (Rafael J Wysocki).

   - Fixes for issues related to ACPI button events (Rafael J Wysocki).

   - New device ID for an ACPI-enumerated device included into the
     Wildcat Point PCH from Jie Yang.

   - ACPI video updates related to backlight handling from Hans de Goede
     and Linus Torvalds.

   - Preliminary changes needed to support ACPI on ARM from Hanjun Guo
     and Graeme Gregory.

   - ACPI PNP core cleanups from Arjun Sreedharan and Zhang Rui.

   - Cleanups related to ACPI_COMPANION() and ACPI_HANDLE() macros
     (Rafael J Wysocki).

   - ACPI-based device hotplug cleanups from Wei Yongjun and Rafael J
     Wysocki.

   - Cleanups and improvements related to system suspend from Lan
     Tianyu, Randy Dunlap and Rafael J Wysocki.

   - ACPI battery cleanup from Wei Yongjun.

   - cpufreq core fixes from Viresh Kumar.

   - Elimination of a deadband effect from the cpufreq ondemand governor
     and intel_pstate driver cleanups from Stratos Karafotis.

   - 350MHz CPU support for the powernow-k6 cpufreq driver from Mikulas
     Patocka.

   - Fix for the imx6 cpufreq driver from Anson Huang.

   - cpuidle core and governor cleanups from Daniel Lezcano, Sandeep
     Tripathy and Mohammad Merajul Islam Molla.

   - Build fix for the big_little cpuidle driver from Sachin Kamat.

   - Configuration fix for the Operation Performance Points (OPP)
     framework from Mark Brown.

   - APM cleanup from Jean Delvare.

   - cpupower utility fixes and cleanups from Peter Senna Tschudin,
     Andrey Utkin, Himangi Saraogi, Rickard Strandqvist, Thomas
     Renninger"

* tag 'pm+acpi-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (118 commits)
  ACPI / LPSS: add LPSS device for Wildcat Point PCH
  ACPI / PNP: Replace faulty is_hex_digit() by isxdigit()
  ACPICA: Update version to 20140724.
  ACPICA: ACPI 5.1: Update for PCCT table changes.
  ACPICA/ARM: ACPI 5.1: Update for GTDT table changes.
  ACPICA/ARM: ACPI 5.1: Update for MADT changes.
  ACPICA/ARM: ACPI 5.1: Update for FADT changes.
  ACPICA: ACPI 5.1: Support for the _CCA predifined name.
  ACPICA: ACPI 5.1: New notify value for System Affinity Update.
  ACPICA: ACPI 5.1: Support for the _DSD predefined name.
  ACPICA: Debug object: Add current value of Timer() to debug line prefix.
  ACPICA: acpihelp: Add UUID support, restructure some existing files.
  ACPICA: Utilities: Fix local printf issue.
  ACPICA: Tables: Update for DMAR table changes.
  ACPICA: Remove some extraneous printf arguments.
  ACPICA: Update for comments/formatting. No functional changes.
  ACPICA: Disassembler: Add support for the ToUUID opererator (macro).
  ACPICA: Remove a redundant cast to acpi_size for ACPI_OFFSET() macro.
  ACPICA: Work around an ancient GCC bug.
  ACPI / processor: Make it possible to get local x2apic id via _MAT
  ...

KMSG_COMPONENT has to be defined instead of COMPONENT.

Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Fixes the following sparse warning:

drivers/pci/hotplug/acpiphp_glue.c:923:6: warning:
 symbol 'acpiphp_drop_bridge' was not declared. Should it be static?

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>