linux-stable.git/drivers/pci/controller, branch v6.1.78

PCI: mediatek-gen3: Fix translation window size calculation

2024-01-25T23:27:48+00:00

[ Upstream commit 9ccc1318cf4bd90601f221268e42c3374703d681 ]

When using the fls() helper, the translation table should be a power of
two; otherwise, the resulting value will not be correct.

For example, given fls(0x3e00000) - 1 = 25, the PCIe translation window
size will be set to 0x2000000 instead of the expected size 0x3e00000.

Fix the translation window by splitting the MMIO space into multiple tables
if its size is not a power of two.

[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20231023081423.18559-1-jianjun.wang@mediatek.com
Fixes: d3bf75b579b9 ("PCI: mediatek-gen3: Add MediaTek Gen3 driver for MT8192")
Signed-off-by: Jianjun Wang 
Signed-off-by: Krzysztof Wilczyński 
Signed-off-by: Bjorn Helgaas 
Reviewed-by: AngeloGioacchino Del Regno 
Signed-off-by: Sasha Levin

PCI: keystone: Fix race condition when initializing PHYs

2024-01-25T23:27:48+00:00

[ Upstream commit c12ca110c613a81cb0f0099019c839d078cd0f38 ]

The PCI driver invokes the PHY APIs using the ks_pcie_enable_phy()
function. The PHY in this case is the Serdes. It is possible that the
PCI instance is configured for two lane operation across two different
Serdes instances, using one lane of each Serdes.

In such a configuration, if the reference clock for one Serdes is
provided by the other Serdes, it results in a race condition. After the
Serdes providing the reference clock is initialized by the PCI driver by
invoking its PHY APIs, it is not guaranteed that this Serdes remains
powered on long enough for the PHY APIs based initialization of the
dependent Serdes. In such cases, the PLL of the dependent Serdes fails
to lock due to the absence of the reference clock from the former Serdes
which has been powered off by the PM Core.

Fix this by obtaining reference to the PHYs before invoking the PHY
initialization APIs and releasing reference after the initialization is
complete.

Link: https://lore.kernel.org/linux-pci/20230927041845.1222080-1-s-vadapalli@ti.com
Fixes: 49229238ab47 ("PCI: keystone: Cleanup PHY handling")
Signed-off-by: Siddharth Vadapalli 
Signed-off-by: Krzysztof Wilczyński 
Acked-by: Ravi Gunasekaran 
Signed-off-by: Sasha Levin

PCI: mediatek: Clear interrupt status before dispatching handler

2024-01-25T23:27:44+00:00

commit 4e11c29873a8a296a20f99b3e03095e65ebf897d upstream.

We found a failure when using the iperf tool during WiFi performance
testing, where some MSIs were received while clearing the interrupt
status, and these MSIs cannot be serviced.

The interrupt status can be cleared even if the MSI status remains pending.
As such, given the edge-triggered interrupt type, its status should be
cleared before being dispatched to the handler of the underling device.

[kwilczynski: commit log, code comment wording]
Link: https://lore.kernel.org/linux-pci/20231211094923.31967-1-jianjun.wang@mediatek.com
Fixes: 43e6409db64d ("PCI: mediatek: Add MSI support for MT2712 and MT7622")
Signed-off-by: qizhong cheng 
Signed-off-by: Jianjun Wang 
Signed-off-by: Krzysztof Wilczyński 
[bhelgaas: rewrap comment]
Signed-off-by: Bjorn Helgaas 
Reviewed-by: AngeloGioacchino Del Regno 
Cc:  
Signed-off-by: Greg Kroah-Hartman

PCI: dwc: endpoint: Fix dw_pcie_ep_raise_msix_irq() alignment support

2024-01-25T23:27:44+00:00

commit 2217fffcd63f86776c985d42e76daa43a56abdf1 upstream.

Commit 6f5e193bfb55 ("PCI: dwc: Fix dw_pcie_ep_raise_msix_irq() to get
correct MSI-X table address") modified dw_pcie_ep_raise_msix_irq() to
support iATUs which require a specific alignment.

However, this support cannot have been properly tested.

The whole point is for the iATU to map an address that is aligned,
using dw_pcie_ep_map_addr(), and then let the writel() write to
ep->msi_mem + aligned_offset.

Thus, modify the address that is mapped such that it is aligned.
With this change, dw_pcie_ep_raise_msix_irq() matches the logic in
dw_pcie_ep_raise_msi_irq().

Link: https://lore.kernel.org/linux-pci/20231128132231.2221614-1-nks@flawful.org
Fixes: 6f5e193bfb55 ("PCI: dwc: Fix dw_pcie_ep_raise_msix_irq() to get correct MSI-X table address")
Signed-off-by: Niklas Cassel 
Signed-off-by: Krzysztof Wilczyński 
Reviewed-by: Manivannan Sadhasivam 
Cc: stable@vger.kernel.org # 5.7
Cc: Kishon Vijay Abraham I 
Signed-off-by: Greg Kroah-Hartman

PCI: loongson: Limit MRRS to 256

2023-12-20T16:00:20+00:00

commit ef61a0405742a9f7f6051bc6fd2f017d87d07911 upstream.

This is a partial revert of 8b3517f88ff2 ("PCI: loongson: Prevent LS7A MRRS
increases") for MIPS-based Loongson.

Some MIPS Loongson systems don't support arbitrary Max_Read_Request_Size
(MRRS) settings.  8b3517f88ff2 ("PCI: loongson: Prevent LS7A MRRS
increases") worked around that by (1) assuming that firmware configured
MRRS to the maximum supported value and (2) preventing the PCI core from
increasing MRRS.

Unfortunately, some firmware doesn't set that maximum MRRS correctly, which
results in devices not being initialized correctly.  One symptom, from the
Debian report below, is this:

  ata4.00: exception Emask 0x0 SAct 0x20000000 SErr 0x0 action 0x6 frozen
  ata4.00: failed command: WRITE FPDMA QUEUED
  ata4.00: cmd 61/20:e8:00:f0:e1/00:00:00:00:00/40 tag 29 ncq dma 16384 out
           res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
  ata4.00: status: { DRDY }
  ata4: hard resetting link

Limit MRRS to 256 because MIPS Loongson with higher MRRS support is
considered rare.

This must be done at device enablement stage because the MRRS setting may
get lost if PCI_COMMAND_MASTER on the parent bridge is cleared, and we are
only sure parent bridge is enabled at this point.

Fixes: 8b3517f88ff2 ("PCI: loongson: Prevent LS7A MRRS increases")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217680
Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1035587
Link: https://lore.kernel.org/r/20231201115028.84351-1-jiaxun.yang@flygoat.com
Signed-off-by: Jiaxun Yang 
Signed-off-by: Bjorn Helgaas 
Acked-by: Huacai Chen 
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman

PCI: qcom-ep: Add dedicated callback for writing to DBI2 registers

2023-12-08T07:51:18+00:00

[ Upstream commit a07d2497ed657eb2efeb967af47e22f573dcd1d6 ]

The DWC core driver exposes the write_dbi2() callback for writing to the
DBI2 registers in a vendor-specific way.

On the Qcom EP platforms, the DBI_CS2 bit in the ELBI region needs to be
asserted before writing to any DBI2 registers and deasserted once done.

So, let's implement the callback for the Qcom PCIe EP driver so that the
DBI2 writes are correctly handled in the hardware.

Without this callback, the DBI2 register writes like BAR size won't go
through and as a result, the default BAR size is set for all BARs.

[kwilczynski: commit log, renamed function to match the DWC convention]
Fixes: f55fee56a631 ("PCI: qcom-ep: Add Qualcomm PCIe Endpoint controller driver")
Suggested-by: Serge Semin 
Link: https://lore.kernel.org/linux-pci/20231025130029.74693-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam 
Signed-off-by: Krzysztof Wilczyński 
Reviewed-by: Serge Semin 
Cc: stable@vger.kernel.org # 5.16+
Signed-off-by: Sasha Levin

PCI: exynos: Don't discard .remove() callback

2023-11-28T17:07:11+00:00

commit 83a939f0fdc208ff3639dd3d42ac9b3c35607fd2 upstream.

With CONFIG_PCI_EXYNOS=y and exynos_pcie_remove() marked with __exit, the
function is discarded from the driver. In this case a bound device can
still get unbound, e.g via sysfs. Then no cleanup code is run resulting in
resource leaks or worse.

The right thing to do is do always have the remove callback available.
This fixes the following warning by modpost:

  WARNING: modpost: drivers/pci/controller/dwc/pci-exynos: section mismatch in reference: exynos_pcie_driver+0x8 (section: .data) -> exynos_pcie_remove (section: .exit.text)

(with ARCH=x86_64 W=1 allmodconfig).

Fixes: 340cba6092c2 ("pci: Add PCIe driver for Samsung Exynos")
Link: https://lore.kernel.org/r/20231001170254.2506508-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König 
Signed-off-by: Bjorn Helgaas 
Reviewed-by: Alim Akhtar 
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman

PCI: kirin: Don't discard .remove() callback

2023-11-28T17:07:11+00:00

commit 3064ef2e88c1629c1e67a77d7bc20020b35846f2 upstream.

With CONFIG_PCIE_KIRIN=y and kirin_pcie_remove() marked with __exit, the
function is discarded from the driver. In this case a bound device can
still get unbound, e.g via sysfs. Then no cleanup code is run resulting in
resource leaks or worse.

The right thing to do is do always have the remove callback available.
This fixes the following warning by modpost:

  drivers/pci/controller/dwc/pcie-kirin: section mismatch in reference: kirin_pcie_driver+0x8 (section: .data) -> kirin_pcie_remove (section: .exit.text)

(with ARCH=x86_64 W=1 allmodconfig).

Fixes: 000f60db784b ("PCI: kirin: Add support for a PHY layer")
Link: https://lore.kernel.org/r/20231001170254.2506508-3-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König 
Signed-off-by: Bjorn Helgaas 
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman

PCI: keystone: Don't discard .probe() callback

2023-11-28T17:07:10+00:00

commit 7994db905c0fd692cf04c527585f08a91b560144 upstream.

The __init annotation makes the ks_pcie_probe() function disappear after
booting completes. However a device can also be bound later. In that case,
we try to call ks_pcie_probe(), but the backing memory is likely already
overwritten.

The right thing to do is do always have the probe callback available.  Note
that the (wrong) __refdata annotation prevented this issue to be noticed by
modpost.

Fixes: 0c4ffcfe1fbc ("PCI: keystone: Add TI Keystone PCIe driver")
Link: https://lore.kernel.org/r/20231001170254.2506508-5-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König 
Signed-off-by: Bjorn Helgaas 
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman

PCI: keystone: Don't discard .remove() callback

2023-11-28T17:07:10+00:00

commit 200bddbb3f5202bbce96444fdc416305de14f547 upstream.

With CONFIG_PCIE_KEYSTONE=y and ks_pcie_remove() marked with __exit, the
function is discarded from the driver. In this case a bound device can
still get unbound, e.g via sysfs. Then no cleanup code is run resulting in
resource leaks or worse.

The right thing to do is do always have the remove callback available.
Note that this driver cannot be compiled as a module, so ks_pcie_remove()
was always discarded before this change and modpost couldn't warn about
this issue. Furthermore the __ref annotation also prevents a warning.

Fixes: 0c4ffcfe1fbc ("PCI: keystone: Add TI Keystone PCIe driver")
Link: https://lore.kernel.org/r/20231001170254.2506508-4-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König 
Signed-off-by: Bjorn Helgaas 
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman