linux-stable.git/drivers/pci/controller, branch v5.4.58

PCI: tegra: Revert tegra124 raw_violation_fixup

2020-08-11T13:33:39+00:00

commit e7b856dfcec6d3bf028adee8c65342d7035914a1 upstream.

As reported in https://bugzilla.kernel.org/206217 , raw_violation_fixup
is causing more harm than good in some common use-cases.

This patch is a partial revert of commit:

191cd6fb5d2c ("PCI: tegra: Add SW fixup for RAW violations")

and fixes the following regression since then.

* Description:

When both the NIC and MMC are used one can see the following message:

  NETDEV WATCHDOG: enp1s0 (r8169): transmit queue 0 timed out

and

  pcieport 0000:00:02.0: AER: Uncorrected (Non-Fatal) error received: 0000:01:00.0
  r8169 0000:01:00.0: AER: PCIe Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, (Requester ID)
  r8169 0000:01:00.0: AER:   device [10ec:8168] error status/mask=00004000/00400000
  r8169 0000:01:00.0: AER:    [14] CmpltTO                (First)
  r8169 0000:01:00.0: AER: can't recover (no error_detected callback)
  pcieport 0000:00:02.0: AER: device recovery failed

After that, the ethernet NIC is not functional anymore even after
reloading the r8169 module. After a reboot, this is reproducible by
copying a large file over the NIC to the MMC.

For some reason this is not reproducible when files are copied to a tmpfs.

* Little background on the fixup, by Manikanta Maddireddy:
  "In the internal testing with dGPU on Tegra124, CmplTO is reported by
dGPU. This happened because FIFO queue in AFI(AXI to PCIe) module
get full by upstream posted writes. Back to back upstream writes
interleaved with infrequent reads, triggers RAW violation and CmpltTO.
This is fixed by reducing the posted write credits and by changing
updateFC timer frequency. These settings are fixed after stress test.

In the current case, RTL NIC is also reporting CmplTO. These settings
seems to be aggravating the issue instead of fixing it."

Link: https://lore.kernel.org/r/20200718100710.15398-1-kwizart@gmail.com
Fixes: 191cd6fb5d2c ("PCI: tegra: Add SW fixup for RAW violations")
Signed-off-by: Nicolas Chauvet 
Signed-off-by: Lorenzo Pieralisi 
Reviewed-by: Manikanta Maddireddy 
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman

irqdomain/treewide: Keep firmware node unconditionally allocated

2020-07-29T08:18:28+00:00

[ Upstream commit e3beca48a45b5e0e6e6a4e0124276b8248dcc9bb ]

Quite some non OF/ACPI users of irqdomains allocate firmware nodes of type
IRQCHIP_FWNODE_NAMED or IRQCHIP_FWNODE_NAMED_ID and free them right after
creating the irqdomain. The only purpose of these FW nodes is to convey
name information. When this was introduced the core code did not store the
pointer to the node in the irqdomain. A recent change stored the firmware
node pointer in irqdomain for other reasons and missed to notice that the
usage sites which do the alloc_fwnode/create_domain/free_fwnode sequence
are broken by this. Storing a dangling pointer is dangerous itself, but in
case that the domain is destroyed later on this leads to a double free.

Remove the freeing of the firmware node after creating the irqdomain from
all affected call sites to cure this.

Fixes: 711419e504eb ("irqdomain: Add the missing assignment of domain->fwnode for named fwnode")
Reported-by: Andy Shevchenko 
Signed-off-by: Thomas Gleixner 
Acked-by: Bjorn Helgaas 
Acked-by: Marc Zyngier 
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/873661qakd.fsf@nanos.tec.linutronix.de
Signed-off-by: Sasha Levin

PCI: amlogic: meson: Don't use FAST_LINK_MODE to set up link

2020-06-24T15:50:31+00:00

[ Upstream commit 87dccf09323fc363bd0d072fcc12b96622ab8c69 ]

The vim3l board does not work with a standard PCIe switch (ASM1184e),
spitting all kind of errors - hinting at HW misconfiguration (no link,
port enumeration issues, etc).

According to the the Synopsys DWC PCIe Reference Manual, in the section
dedicated to the PLCR register, bit 7 is described (FAST_LINK_MODE) as:

"Sets all internal timers to fast mode for simulation purposes."

it is sound to set this bit from a simulation perspective, but on actual
silicon, which expects timers to have a nominal value, it is not.

Make sure the FAST_LINK_MODE bit is cleared when configuring the RC
to solve this problem.

Link: https://lore.kernel.org/r/20200429164230.309922-1-maz@kernel.org
Fixes: 9c0ef6d34fdb ("PCI: amlogic: Add the Amlogic Meson PCIe controller driver")
Signed-off-by: Marc Zyngier 
[lorenzo.pieralisi@arm.com: commit log]
Signed-off-by: Lorenzo Pieralisi 
Reviewed-by: Neil Armstrong 
Acked-by: Rob Herring 
Signed-off-by: Sasha Levin

PCI: dwc: Fix inner MSI IRQ domain registration

2020-06-24T15:50:31+00:00

[ Upstream commit 0414b93e78d87ecc24ae1a7e61fe97deb29fa2f4 ]

On a system that uses the internal DWC MSI widget, I get this
warning from debugfs when CONFIG_GENERIC_IRQ_DEBUGFS is selected:

  debugfs: File ':soc:pcie@fc000000' in directory 'domains' already present!

This is due to the fact that the DWC MSI code tries to register two
IRQ domains for the same firmware node, without telling the low
level code how to distinguish them (by setting a bus token). This
further confuses debugfs which tries to create corresponding
files for each domain.

Fix it by tagging the inner domain as DOMAIN_BUS_NEXUS, which is
the closest thing we have as to "generic MSI".

Link: https://lore.kernel.org/r/20200501113921.366597-1-maz@kernel.org
Signed-off-by: Marc Zyngier 
Signed-off-by: Lorenzo Pieralisi 
Acked-by: Jingoo Han 
Signed-off-by: Sasha Levin

PCI: rcar: Fix incorrect programming of OB windows

2020-06-24T15:50:24+00:00

[ Upstream commit 2b9f217433e31d125fb697ca7974d3de3ecc3e92 ]

The outbound windows (PCIEPAUR(x), PCIEPALR(x)) describe a mapping between
a CPU address (which is determined by the window number 'x') and a
programmed PCI address - Thus allowing the controller to translate CPU
accesses into PCI accesses.

However the existing code incorrectly writes the CPU address - lets fix
this by writing the PCI address instead.

For memory transactions, existing DT users describe a 1:1 identity mapping
and thus this change should have no effect. However the same isn't true for
I/O.

Link: https://lore.kernel.org/r/20191004132941.6660-1-andrew.murray@arm.com
Fixes: c25da4778803 ("PCI: rcar: Add Renesas R-Car PCIe driver")
Tested-by: Marek Vasut 
Signed-off-by: Andrew Murray 
Signed-off-by: Lorenzo Pieralisi 
Reviewed-by: Marek Vasut 
Signed-off-by: Sasha Levin

PCI: v3-semi: Fix a memory leak in v3_pci_probe() error handling paths

2020-06-24T15:50:24+00:00

[ Upstream commit bca718988b9008d0d5f504e2d318178fc84958c1 ]

If we fails somewhere in 'v3_pci_probe()', we need to free 'host'.

Use the managed version of 'pci_alloc_host_bridge()' to do that easily.
The use of managed resources is already widely used in this driver.

Link: https://lore.kernel.org/r/20200418081637.1585-1-christophe.jaillet@wanadoo.fr
Fixes: 68a15eb7bd0c ("PCI: v3-semi: Add V3 Semiconductor PCI host driver")
Signed-off-by: Christophe JAILLET 
[lorenzo.pieralisi@arm.com: commit log]
Signed-off-by: Lorenzo Pieralisi 
Acked-by: Linus Walleij 
Signed-off-by: Sasha Levin

PCI: vmd: Filter resource type bits from shadow register

2020-06-24T15:50:17+00:00

[ Upstream commit 3e5095eebe015d5a4d566aa5e03c8621add5f0a7 ]

Versions of VMD with the Host Physical Address shadow register use this
register to calculate the bus address offset needed to do guest
passthrough of the domain. This register shadows the Host Physical
Address registers including the resource type bits. After calculating
the offset, the extra resource type bits lead to the VMD resources being
over-provisioned at the front and under-provisioned at the back.

Example:
pci 10000:80:02.0: reg 0x10: [mem 0xf801fffc-0xf803fffb 64bit]

Expected:
pci 10000:80:02.0: reg 0x10: [mem 0xf8020000-0xf803ffff 64bit]

If other devices are mapped in the over-provisioned front, it could lead
to resource conflict issues with VMD or those devices.

Link: https://lore.kernel.org/r/20200528030240.16024-3-jonathan.derrick@intel.com
Fixes: a1a30170138c9 ("PCI: vmd: Fix shadow offsets to reflect spec changes")
Signed-off-by: Jon Derrick 
Signed-off-by: Lorenzo Pieralisi 
Signed-off-by: Sasha Levin

PCI: aardvark: Don't blindly enable ASPM L0s and don't write to read-only register

2020-06-24T15:50:15+00:00

[ Upstream commit 90c6cb4a355e7befcb557d217d1d8b8bd5875a05 ]

Trying to change Link Status register does not have any effect as this
is a read-only register. Trying to overwrite bits for Negotiated Link
Width does not make sense.

In future proper change of link width can be done via Lane Count Select
bits in PCIe Control 0 register.

Trying to unconditionally enable ASPM L0s via ASPM Control bits in Link
Control register is wrong. There should be at least some detection if
endpoint supports L0s as isn't mandatory.

Moreover ASPM Control bits in Link Control register are controlled by
pcie/aspm.c code which sets it according to system ASPM settings,
immediately after aardvark driver probes. So setting these bits by
aardvark driver has no long running effect.

Remove code which touches ASPM L0s bits from this driver and let
kernel's ASPM implementation to set ASPM state properly.

Some users are reporting issues that this code is problematic for some
Intel wifi cards and removing it fixes them, see e.g.:
https://bugzilla.kernel.org/show_bug.cgi?id=196339

If problems with Intel wifi cards occur even after this commit, then
pcie/aspm.c code could be modified / hooked to not enable ASPM L0s state
for affected problematic cards.

Link: https://lore.kernel.org/r/20200430080625.26070-3-pali@kernel.org
Tested-by: Tomasz Maciej Nowak 
Signed-off-by: Pali Rohár 
Signed-off-by: Lorenzo Pieralisi 
Acked-by: Rob Herring 
Acked-by: Thomas Petazzoni 
Signed-off-by: Sasha Levin

PCI: vmd: Add device id for VMD device 8086:9A0B

2020-06-22T07:31:16+00:00

[ Upstream commit ec11e5c213cc20cac5e8310728b06793448b9f6d ]

This patch adds support for this VMD device which supports the bus
restriction mode.

Signed-off-by: Jon Derrick 
Signed-off-by: Lorenzo Pieralisi 
Signed-off-by: Sasha Levin

PCI: qcom: Fix the fixup of PCI_VENDOR_ID_QCOM

2020-04-17T08:50:10+00:00

commit 604f3956524a6a53c1e3dd27b4b685b664d181ec upstream.

There exists non-bridge PCIe devices with PCI_VENDOR_ID_QCOM, so limit
the fixup to only affect the relevant PCIe bridges.

Fixes: 322f03436692 ("PCI: qcom: Use default config space read function")
Signed-off-by: Bjorn Andersson 
Signed-off-by: Lorenzo Pieralisi 
Acked-by: Stanimir Varbanov 
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Greg Kroah-Hartman