linux-stable.git/drivers/pci/controller, branch v5.4.16 Linux kernel stable tree PCI: mobiveil: Fix csr_read()/write() build issue 2020-01-26T09:01:04+00:00 Kefeng Wang wangkefeng.wang@huawei.com 2019-10-04T04:19:25+00:00 1865d6440fb63ad979d7034b2d7c94937bfd2200 [ Upstream commit 4906c05b87d44c19b225935e24d62e4480ca556d ] RISCV has csr_read()/write() macros in arch/riscv/include/asm/csr.h. The same function naming is used in the PCI mobiveil driver thus causing build error. Rename csr_[read,write][l,] to mobiveil_csr_read()/write() to fix it. drivers/pci/controller/pcie-mobiveil.c:238:69: error: macro "csr_read" passed 3 arguments, but takes just 1 static u32 csr_read(struct mobiveil_pcie *pcie, u32 off, size_t size) drivers/pci/controller/pcie-mobiveil.c:253:80: error: macro "csr_write" passed 4 arguments, but takes just 2 static void csr_write(struct mobiveil_pcie *pcie, u32 val, u32 off, size_t size) Fixes: bcbe0d9a8d93 ("PCI: mobiveil: Unify register accessors") Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Cc: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Minghuan Lian <Minghuan.Lian@nxp.com> Cc: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in> Cc: Andrew Murray <andrew.murray@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 4906c05b87d44c19b225935e24d62e4480ca556d ]

RISCV has csr_read()/write() macros in arch/riscv/include/asm/csr.h.

The same function naming is used in the PCI mobiveil driver thus
causing build error.

Rename csr_[read,write][l,] to mobiveil_csr_read()/write() to fix it.

drivers/pci/controller/pcie-mobiveil.c:238:69: error: macro "csr_read" passed 3 arguments, but takes just 1
 static u32 csr_read(struct mobiveil_pcie *pcie, u32 off, size_t size)

drivers/pci/controller/pcie-mobiveil.c:253:80: error: macro "csr_write" passed 4 arguments, but takes just 2
 static void csr_write(struct mobiveil_pcie *pcie, u32 val, u32 off, size_t size)

Fixes: bcbe0d9a8d93 ("PCI: mobiveil: Unify register accessors")
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Cc: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Minghuan Lian <Minghuan.Lian@nxp.com>
Cc: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
Cc: Andrew Murray <andrew.murray@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
PCI: dwc: Fix find_next_bit() usage 2020-01-17T18:48:53+00:00 Niklas Cassel niklas.cassel@linaro.org 2019-09-04T16:03:38+00:00 9c18c065c30e339da6ca57b74ec432593e6df809 commit 1137e61dcb99f7f8b54e77ed83f68b5b485a3e34 upstream. find_next_bit() takes a parameter of size long, and performs arithmetic that assumes that the argument is of size long. Therefore we cannot pass a u32, since this will cause find_next_bit() to read outside the stack buffer and will produce the following print: BUG: KASAN: stack-out-of-bounds in find_next_bit+0x38/0xb0 Fixes: 1b497e6493c4 ("PCI: dwc: Fix uninitialized variable in dw_handle_msi_irq()") Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 1137e61dcb99f7f8b54e77ed83f68b5b485a3e34 upstream.

find_next_bit() takes a parameter of size long, and performs arithmetic
that assumes that the argument is of size long.

Therefore we cannot pass a u32, since this will cause find_next_bit()
to read outside the stack buffer and will produce the following print:
BUG: KASAN: stack-out-of-bounds in find_next_bit+0x38/0xb0

Fixes: 1b497e6493c4 ("PCI: dwc: Fix uninitialized variable in dw_handle_msi_irq()")
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI: aardvark: Fix PCI_EXP_RTCTL register configuration 2020-01-17T18:48:53+00:00 Remi Pommarel repk@triplefau.lt 2019-06-14T10:10:59+00:00 ec932793848faef450a47e76e3836721aeabe078 commit c0f05a6ab52535c1bf5f43272eede3e11c5701a5 upstream. PCI_EXP_RTCTL is used to activate PME interrupt only, so writing into it should not modify other interrupts' mask. The ISR mask polarity was also inverted, when PCI_EXP_RTCTL_PMEIE is set PCIE_MSG_PM_PME_MASK mask bit should actually be cleared. Fixes: 8a3ebd8de328 ("PCI: aardvark: Implement emulated root PCI bridge config space") Signed-off-by: Remi Pommarel <repk@triplefau.lt> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit c0f05a6ab52535c1bf5f43272eede3e11c5701a5 upstream.

PCI_EXP_RTCTL is used to activate PME interrupt only, so writing into it
should not modify other interrupts' mask. The ISR mask polarity was also
inverted, when PCI_EXP_RTCTL_PMEIE is set PCIE_MSG_PM_PME_MASK mask bit
should actually be cleared.

Fixes: 8a3ebd8de328 ("PCI: aardvark: Implement emulated root PCI bridge config space")
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI: aardvark: Use LTSSM state to build link training flag 2020-01-17T18:48:53+00:00 Remi Pommarel repk@triplefau.lt 2019-05-22T21:33:51+00:00 8bb461eced314e3854232a641533148a5760fe26 commit 364b3f1ff8f096d45f042a9c85daf7a1fc78413e upstream. Aardvark's PCI_EXP_LNKSTA_LT flag in its link status register is not implemented and does not reflect the actual link training state (the flag is always set to 0). In order to support link re-training feature this flag has to be emulated. The Link Training and Status State Machine (LTSSM) flag in Aardvark LMI config register could be used as a link training indicator. Indeed if the LTSSM is in L0 or upper state then link training has completed (see [1]). Unfortunately because after asking a link retraining it takes a while for the LTSSM state to become less than 0x10 (due to L0s to recovery state transition delays), LTSSM can still be in L0 while link training has not finished yet. So this waits for link to be in recovery or lesser state before returning after asking for a link retrain. [1] "PCI Express Base Specification", REV. 4.0 PCI Express, February 19 2014, Table 4-14 Fixes: 8a3ebd8de328 ("PCI: aardvark: Implement emulated root PCI bridge config space") Tested-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Remi Pommarel <repk@triplefau.lt> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 364b3f1ff8f096d45f042a9c85daf7a1fc78413e upstream.

Aardvark's PCI_EXP_LNKSTA_LT flag in its link status register is not
implemented and does not reflect the actual link training state (the
flag is always set to 0). In order to support link re-training feature
this flag has to be emulated. The Link Training and Status State
Machine (LTSSM) flag in Aardvark LMI config register could be used as
a link training indicator. Indeed if the LTSSM is in L0 or upper state
then link training has completed (see [1]).

Unfortunately because after asking a link retraining it takes a while
for the LTSSM state to become less than 0x10 (due to L0s to recovery
state transition delays), LTSSM can still be in L0 while link training
has not finished yet. So this waits for link to be in recovery or lesser
state before returning after asking for a link retrain.

[1] "PCI Express Base Specification", REV. 4.0
    PCI Express, February 19 2014, Table 4-14

Fixes: 8a3ebd8de328 ("PCI: aardvark: Implement emulated root PCI bridge config space")
Tested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI: amlogic: Fix probed clock names 2020-01-17T18:48:22+00:00 Neil Armstrong narmstrong@baylibre.com 2019-09-16T12:50:18+00:00 c66c84b5223134f95e16c05e1d85c50bf8623e7a commit eacaf7dcf08eb062a1059c6c115fa3fced3374ae upstream. Fix the clock names used in the probe function according to the bindings. Fixes: 9c0ef6d34fdb ("PCI: amlogic: Add the Amlogic Meson PCIe controller driver") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit eacaf7dcf08eb062a1059c6c115fa3fced3374ae upstream.

Fix the clock names used in the probe function according
to the bindings.

Fixes: 9c0ef6d34fdb ("PCI: amlogic: Add the Amlogic Meson PCIe controller driver")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI: rcar: Fix missing MACCTLR register setting in initialization sequence 2019-12-21T10:04:30+00:00 Yoshihiro Shimoda yoshihiro.shimoda.uh@renesas.com 2019-11-05T10:51:29+00:00 2a67fc32eb9b6d4731f757309403181fd80b2c69 commit 7c7e53e1c93df14690bd12c1f84730fef927a6f1 upstream. The R-Car Gen2/3 manual - available at: https://www.renesas.com/eu/en/products/microcontrollers-microprocessors/rz/rzg/rzg1m.html#documents "RZ/G Series User's Manual: Hardware" section strictly enforces the MACCTLR inizialization value - 39.3.1 - "Initial Setting of PCI Express": "Be sure to write the initial value (= H'80FF 0000) to MACCTLR before enabling PCIETCTLR.CFINIT". To avoid unexpected behavior and to match the SW initialization sequence guidelines, this patch programs the MACCTLR with the correct value. Note that the MACCTLR.SPCHG bit in the MACCTLR register description reports that "Only writing 1 is valid and writing 0 is invalid" but this "invalid" has to be interpreted as a write-ignore aka "ignored", not "prohibited". Reported-by: Eugeniu Rosca <erosca@de.adit-jv.com> Fixes: c25da4778803 ("PCI: rcar: Add Renesas R-Car PCIe driver") Fixes: be20bbcb0a8c ("PCI: rcar: Add the initialization of PCIe link in resume_noirq()") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: <stable@vger.kernel.org> # v5.2+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 7c7e53e1c93df14690bd12c1f84730fef927a6f1 upstream.

The R-Car Gen2/3 manual - available at:

https://www.renesas.com/eu/en/products/microcontrollers-microprocessors/rz/rzg/rzg1m.html#documents

"RZ/G Series User's Manual: Hardware" section

strictly enforces the MACCTLR inizialization value - 39.3.1 - "Initial
Setting of PCI Express":

"Be sure to write the initial value (= H'80FF 0000) to MACCTLR before
enabling PCIETCTLR.CFINIT".

To avoid unexpected behavior and to match the SW initialization sequence
guidelines, this patch programs the MACCTLR with the correct value.

Note that the MACCTLR.SPCHG bit in the MACCTLR register description
reports that "Only writing 1 is valid and writing 0 is invalid" but this
"invalid" has to be interpreted as a write-ignore aka "ignored", not
"prohibited".

Reported-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Fixes: c25da4778803 ("PCI: rcar: Add Renesas R-Car PCIe driver")
Fixes: be20bbcb0a8c ("PCI: rcar: Add the initialization of PCIe link in resume_noirq()")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: <stable@vger.kernel.org> # v5.2+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge tag 'pci-v5.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci 2019-09-24T02:16:01+00:00 Linus Torvalds torvalds@linux-foundation.org 2019-09-24T02:16:01+00:00 299d14d4c31aff3b37a03894e012edf8421676ee Pull PCI updates from Bjorn Helgaas: "Enumeration: - Consolidate _HPP/_HPX stuff in pci-acpi.c and simplify it (Krzysztof Wilczynski) - Fix incorrect PCIe device types and remove dev->has_secondary_link to simplify code that deals with upstream/downstream ports (Mika Westerberg) - After suspend, restore Resizable BAR size bits correctly for 1MB BARs (Sumit Saxena) - Enable PCI_MSI_IRQ_DOMAIN support for RISC-V (Wesley Terpstra) Virtualization: - Add ACS quirks for iProc PAXB (Abhinav Ratna), Amazon Annapurna Labs (Ali Saidi) - Move sysfs SR-IOV functions to iov.c (Kelsey Skunberg) - Remove group write permissions from sysfs sriov_numvfs, sriov_drivers_autoprobe (Kelsey Skunberg) Hotplug: - Simplify pciehp indicator control (Denis Efremov) Peer-to-peer DMA: - Allow P2P DMA between root ports for whitelisted bridges (Logan Gunthorpe) - Whitelist some Intel host bridges for P2P DMA (Logan Gunthorpe) - DMA map P2P DMA requests that traverse host bridge (Logan Gunthorpe) Amazon Annapurna Labs host bridge driver: - Add DT binding and controller driver (Jonathan Chocron) Hyper-V host bridge driver: - Fix hv_pci_dev->pci_slot use-after-free (Dexuan Cui) - Fix PCI domain number collisions (Haiyang Zhang) - Use instance ID bytes 4 & 5 as PCI domain numbers (Haiyang Zhang) - Fix build errors on non-SYSFS config (Randy Dunlap) i.MX6 host bridge driver: - Limit DBI register length (Stefan Agner) Intel VMD host bridge driver: - Fix config addressing issues (Jon Derrick) Layerscape host bridge driver: - Add bar_fixed_64bit property to endpoint driver (Xiaowei Bao) - Add CONFIG_PCI_LAYERSCAPE_EP to build EP/RC drivers separately (Xiaowei Bao) Mediatek host bridge driver: - Add MT7629 controller support (Jianjun Wang) Mobiveil host bridge driver: - Fix CPU base address setup (Hou Zhiqiang) - Make "num-lanes" property optional (Hou Zhiqiang) Tegra host bridge driver: - Fix OF node reference leak (Nishka Dasgupta) - Disable MSI for root ports to work around design problem (Vidya Sagar) - Add Tegra194 DT binding and controller support (Vidya Sagar) - Add support for sideband pins and slot regulators (Vidya Sagar) - Add PIPE2UPHY support (Vidya Sagar) Misc: - Remove unused pci_block_cfg_access() et al (Kelsey Skunberg) - Unexport pci_bus_get(), etc (Kelsey Skunberg) - Hide PM, VC, link speed, ATS, ECRC, PTM constants and interfaces in the PCI core (Kelsey Skunberg) - Clean up sysfs DEVICE_ATTR() usage (Kelsey Skunberg) - Mark expected switch fall-through (Gustavo A. R. Silva) - Propagate errors for optional regulators and PHYs (Thierry Reding) - Fix kernel command line resource_alignment parameter issues (Logan Gunthorpe)" * tag 'pci-v5.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (112 commits) PCI: Add pci_irq_vector() and other stubs when !CONFIG_PCI arm64: tegra: Add PCIe slot supply information in p2972-0000 platform arm64: tegra: Add configuration for PCIe C5 sideband signals PCI: tegra: Add support to enable slot regulators PCI: tegra: Add support to configure sideband pins PCI: vmd: Fix shadow offsets to reflect spec changes PCI: vmd: Fix config addressing when using bus offsets PCI: dwc: Add validation that PCIe core is set to correct mode PCI: dwc: al: Add Amazon Annapurna Labs PCIe controller driver dt-bindings: PCI: Add Amazon's Annapurna Labs PCIe host bridge binding PCI: Add quirk to disable MSI-X support for Amazon's Annapurna Labs Root Port PCI/VPD: Prevent VPD access for Amazon's Annapurna Labs Root Port PCI: Add ACS quirk for Amazon Annapurna Labs root ports PCI: Add Amazon's Annapurna Labs vendor ID MAINTAINERS: Add PCI native host/endpoint controllers designated reviewer PCI: hv: Use bytes 4 and 5 from instance ID as the PCI domain numbers dt-bindings: PCI: tegra: Add PCIe slot supplies regulator entries dt-bindings: PCI: tegra: Add sideband pins configuration entries PCI: tegra: Add Tegra194 PCIe support PCI: Get rid of dev->has_secondary_link flag ... 
Pull PCI updates from Bjorn Helgaas:
 "Enumeration:

   - Consolidate _HPP/_HPX stuff in pci-acpi.c and simplify it
     (Krzysztof Wilczynski)

   - Fix incorrect PCIe device types and remove dev->has_secondary_link
     to simplify code that deals with upstream/downstream ports (Mika
     Westerberg)

   - After suspend, restore Resizable BAR size bits correctly for 1MB
     BARs (Sumit Saxena)

   - Enable PCI_MSI_IRQ_DOMAIN support for RISC-V (Wesley Terpstra)

  Virtualization:

   - Add ACS quirks for iProc PAXB (Abhinav Ratna), Amazon Annapurna
     Labs (Ali Saidi)

   - Move sysfs SR-IOV functions to iov.c (Kelsey Skunberg)

   - Remove group write permissions from sysfs sriov_numvfs,
     sriov_drivers_autoprobe (Kelsey Skunberg)

  Hotplug:

   - Simplify pciehp indicator control (Denis Efremov)

  Peer-to-peer DMA:

   - Allow P2P DMA between root ports for whitelisted bridges (Logan
     Gunthorpe)

   - Whitelist some Intel host bridges for P2P DMA (Logan Gunthorpe)

   - DMA map P2P DMA requests that traverse host bridge (Logan
     Gunthorpe)

  Amazon Annapurna Labs host bridge driver:

   - Add DT binding and controller driver (Jonathan Chocron)

  Hyper-V host bridge driver:

   - Fix hv_pci_dev->pci_slot use-after-free (Dexuan Cui)

   - Fix PCI domain number collisions (Haiyang Zhang)

   - Use instance ID bytes 4 & 5 as PCI domain numbers (Haiyang Zhang)

   - Fix build errors on non-SYSFS config (Randy Dunlap)

  i.MX6 host bridge driver:

   - Limit DBI register length (Stefan Agner)

  Intel VMD host bridge driver:

   - Fix config addressing issues (Jon Derrick)

  Layerscape host bridge driver:

   - Add bar_fixed_64bit property to endpoint driver (Xiaowei Bao)

   - Add CONFIG_PCI_LAYERSCAPE_EP to build EP/RC drivers separately
     (Xiaowei Bao)

  Mediatek host bridge driver:

   - Add MT7629 controller support (Jianjun Wang)

  Mobiveil host bridge driver:

   - Fix CPU base address setup (Hou Zhiqiang)

   - Make "num-lanes" property optional (Hou Zhiqiang)

  Tegra host bridge driver:

   - Fix OF node reference leak (Nishka Dasgupta)

   - Disable MSI for root ports to work around design problem (Vidya
     Sagar)

   - Add Tegra194 DT binding and controller support (Vidya Sagar)

   - Add support for sideband pins and slot regulators (Vidya Sagar)

   - Add PIPE2UPHY support (Vidya Sagar)

  Misc:

   - Remove unused pci_block_cfg_access() et al (Kelsey Skunberg)

   - Unexport pci_bus_get(), etc (Kelsey Skunberg)

   - Hide PM, VC, link speed, ATS, ECRC, PTM constants and interfaces in
     the PCI core (Kelsey Skunberg)

   - Clean up sysfs DEVICE_ATTR() usage (Kelsey Skunberg)

   - Mark expected switch fall-through (Gustavo A. R. Silva)

   - Propagate errors for optional regulators and PHYs (Thierry Reding)

   - Fix kernel command line resource_alignment parameter issues (Logan
     Gunthorpe)"

* tag 'pci-v5.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (112 commits)
  PCI: Add pci_irq_vector() and other stubs when !CONFIG_PCI
  arm64: tegra: Add PCIe slot supply information in p2972-0000 platform
  arm64: tegra: Add configuration for PCIe C5 sideband signals
  PCI: tegra: Add support to enable slot regulators
  PCI: tegra: Add support to configure sideband pins
  PCI: vmd: Fix shadow offsets to reflect spec changes
  PCI: vmd: Fix config addressing when using bus offsets
  PCI: dwc: Add validation that PCIe core is set to correct mode
  PCI: dwc: al: Add Amazon Annapurna Labs PCIe controller driver
  dt-bindings: PCI: Add Amazon's Annapurna Labs PCIe host bridge binding
  PCI: Add quirk to disable MSI-X support for Amazon's Annapurna Labs Root Port
  PCI/VPD: Prevent VPD access for Amazon's Annapurna Labs Root Port
  PCI: Add ACS quirk for Amazon Annapurna Labs root ports
  PCI: Add Amazon's Annapurna Labs vendor ID
  MAINTAINERS: Add PCI native host/endpoint controllers designated reviewer
  PCI: hv: Use bytes 4 and 5 from instance ID as the PCI domain numbers
  dt-bindings: PCI: tegra: Add PCIe slot supplies regulator entries
  dt-bindings: PCI: tegra: Add sideband pins configuration entries
  PCI: tegra: Add Tegra194 PCIe support
  PCI: Get rid of dev->has_secondary_link flag
  ...
Merge branch 'pci/trivial' 2019-09-23T21:10:31+00:00 Bjorn Helgaas bhelgaas@google.com 2019-09-23T21:10:31+00:00 c5048a73b4770304699cb15e3ffcb97acab685f7 - Fix typos and whitespace errors (Bjorn Helgaas, Krzysztof Wilczynski) - Remove unnecessary "return" statements (Krzysztof Wilczynski) - Correct of_irq_parse_pci() function documentation (Lubomir Rintel) * pci/trivial: PCI: Remove unnecessary returns PCI: OF: Correct of_irq_parse_pci() documentation PCI: Fix typos and whitespace errors 
  - Fix typos and whitespace errors (Bjorn Helgaas, Krzysztof Wilczynski)

  - Remove unnecessary "return" statements (Krzysztof Wilczynski)

  - Correct of_irq_parse_pci() function documentation (Lubomir Rintel)

* pci/trivial:
  PCI: Remove unnecessary returns
  PCI: OF: Correct of_irq_parse_pci() documentation
  PCI: Fix typos and whitespace errors
Merge branch 'remotes/lorenzo/pci/vmd' 2019-09-23T21:10:30+00:00 Bjorn Helgaas bhelgaas@google.com 2019-09-23T21:10:30+00:00 cdc7e184abb338dfe24624e90b09d366f0dcfad5 - Fix VMD config addressing to ignore starting bus offset (Jon Derrick) - Fix VMD shadow offset scratchpad address (Jon Derrick) * remotes/lorenzo/pci/vmd: PCI: vmd: Fix shadow offsets to reflect spec changes PCI: vmd: Fix config addressing when using bus offsets 
  - Fix VMD config addressing to ignore starting bus offset (Jon Derrick)

  - Fix VMD shadow offset scratchpad address (Jon Derrick)

* remotes/lorenzo/pci/vmd:
  PCI: vmd: Fix shadow offsets to reflect spec changes
  PCI: vmd: Fix config addressing when using bus offsets
Merge branch 'lorenzo/pci/tegra' 2019-09-23T21:10:28+00:00 Bjorn Helgaas bhelgaas@google.com 2019-09-23T21:10:28+00:00 3efa7f1febe60531c0b5f0397c3e87cfa48591f7 - Fix Tegra OF node reference leak (Nishka Dasgupta) - Add #defines for PCIe Data Link Feature and Physical Layer 16.0 GT/s features (Vidya Sagar) - Disable MSI for Tegra Root Ports since they don't support using MSI for all Root Port events (Vidya Sagar) - Group DesignWare write-protected register writes together (Vidya Sagar) - Move DesignWare capability search interfaces so they can be used by both host and endpoint drivers (Vidya Sagar) - Add DesignWare extended capability search interfaces (Vidya Sagar) - Export dw_pcie_wait_for_link() so drivers can be modules (Vidya Sagar) - Add "snps,enable-cdm-check" DT binding for Configuration Dependent Module (CDM) register checking (Vidya Sagar) - Add DesignWare support for "snps,enable-cdm-check" CDM checking (Vidya Sagar) - Add "supports-clkreq" DT binding for host drivers to decide whether to advertise low power features (Vidya Sagar) - Add DT binding for Tegra194 (Vidya Sagar) - Add DT binding for Tegra194 P2U (PIPE to UPHY) block (Vidya Sagar) - Add support for Tegra194 P2U (PIPE to UPHY) (Vidya Sagar) - Add support for Tegra194 host controller (Vidya Sagar) - Add Tegra support for sideband PERST# and CLKREQ# for C5 (Vidya Sagar) - Add Tegra support for slot regulators for p2972-0000 platform (Vidya Sagar) * lorenzo/pci/tegra: arm64: tegra: Add PCIe slot supply information in p2972-0000 platform arm64: tegra: Add configuration for PCIe C5 sideband signals PCI: tegra: Add support to enable slot regulators PCI: tegra: Add support to configure sideband pins dt-bindings: PCI: tegra: Add PCIe slot supplies regulator entries dt-bindings: PCI: tegra: Add sideband pins configuration entries PCI: tegra: Add Tegra194 PCIe support phy: tegra: Add PCIe PIPE2UPHY support dt-bindings: PHY: P2U: Add Tegra194 P2U block dt-bindings: PCI: tegra: Add device tree support for Tegra194 dt-bindings: Add PCIe supports-clkreq property PCI: dwc: Add support to enable CDM register check dt-bindings: PCI: designware: Add binding for CDM register check PCI: dwc: Export dw_pcie_wait_for_link() API PCI: dwc: Add extended configuration space capability search API PCI: dwc: Move config space capability search API PCI: dwc: Group DBI registers writes requiring unlocking PCI: Disable MSI for Tegra root ports PCI: Add #defines for some of PCIe spec r4.0 features PCI: tegra: Fix OF node reference leak 
  - Fix Tegra OF node reference leak (Nishka Dasgupta)

  - Add #defines for PCIe Data Link Feature and Physical Layer 16.0 GT/s
    features (Vidya Sagar)

  - Disable MSI for Tegra Root Ports since they don't support using MSI for
    all Root Port events (Vidya Sagar)

  - Group DesignWare write-protected register writes together (Vidya Sagar)

  - Move DesignWare capability search interfaces so they can be used by
    both host and endpoint drivers (Vidya Sagar)

  - Add DesignWare extended capability search interfaces (Vidya Sagar)

  - Export dw_pcie_wait_for_link() so drivers can be modules (Vidya Sagar)

  - Add "snps,enable-cdm-check" DT binding for Configuration Dependent
    Module (CDM) register checking (Vidya Sagar)

  - Add DesignWare support for "snps,enable-cdm-check" CDM checking (Vidya
    Sagar)

  - Add "supports-clkreq" DT binding for host drivers to decide whether to
    advertise low power features (Vidya Sagar)

  - Add DT binding for Tegra194 (Vidya Sagar)

  - Add DT binding for Tegra194 P2U (PIPE to UPHY) block (Vidya Sagar)

  - Add support for Tegra194 P2U (PIPE to UPHY) (Vidya Sagar)

  - Add support for Tegra194 host controller (Vidya Sagar)

  - Add Tegra support for sideband PERST# and CLKREQ# for C5 (Vidya Sagar)

  - Add Tegra support for slot regulators for p2972-0000 platform (Vidya
    Sagar)

* lorenzo/pci/tegra:
  arm64: tegra: Add PCIe slot supply information in p2972-0000 platform
  arm64: tegra: Add configuration for PCIe C5 sideband signals
  PCI: tegra: Add support to enable slot regulators
  PCI: tegra: Add support to configure sideband pins
  dt-bindings: PCI: tegra: Add PCIe slot supplies regulator entries
  dt-bindings: PCI: tegra: Add sideband pins configuration entries
  PCI: tegra: Add Tegra194 PCIe support
  phy: tegra: Add PCIe PIPE2UPHY support
  dt-bindings: PHY: P2U: Add Tegra194 P2U block
  dt-bindings: PCI: tegra: Add device tree support for Tegra194
  dt-bindings: Add PCIe supports-clkreq property
  PCI: dwc: Add support to enable CDM register check
  dt-bindings: PCI: designware: Add binding for CDM register check
  PCI: dwc: Export dw_pcie_wait_for_link() API
  PCI: dwc: Add extended configuration space capability search API
  PCI: dwc: Move config space capability search API
  PCI: dwc: Group DBI registers writes requiring unlocking
  PCI: Disable MSI for Tegra root ports
  PCI: Add #defines for some of PCIe spec r4.0 features
  PCI: tegra: Fix OF node reference leak