Pull PCI updates from Bjorn Helgaas:
 "Enumeration:
   - Remove unnecessary locking around _OSC (Bjorn Helgaas)
   - Clarify message about _OSC failure (Bjorn Helgaas)
   - Remove notification of PCIe bandwidth changes (Bjorn Helgaas)
   - Tidy checking of syscall user config accessors (Heiner Kallweit)

  Resource management:
   - Decline to resize resources if boot config must be preserved (Ard
     Biesheuvel)
   - Fix pci_register_io_range() memory leak (Geert Uytterhoeven)

  Error handling (Keith Busch):
   - Clear error status from the correct device
   - Retain error recovery status so drivers can use it after reset
   - Log the type of Port (Root or Switch Downstream) that we reset
   - Always request a reset for Downstream Ports in frozen state

  Endpoint framework and NTB (Kishon Vijay Abraham I):
   - Make *_get_first_free_bar() take into account 64 bit BAR
   - Add helper API to get the 'next' unreserved BAR
   - Make *_free_bar() return error codes on failure
   - Remove unused pci_epf_match_device()
   - Add support to associate secondary EPC with EPF
   - Add support in configfs to associate two EPCs with EPF
   - Add pci_epc_ops to map MSI IRQ
   - Add pci_epf_ops to expose function-specific attrs
   - Allow user to create sub-directory of 'EPF Device' directory
   - Implement ->msi_map_irq() ops for cadence
   - Configure LM_EP_FUNC_CFG based on epc->function_num_map for cadence
   - Add EP function driver to provide NTB functionality
   - Add support for EPF PCI Non-Transparent Bridge
   - Add specification for PCI NTB function device
   - Add PCI endpoint NTB function user guide
   - Add configfs binding documentation for pci-ntb endpoint function

  Broadcom STB PCIe controller driver:
   - Add support for BCM4908 and external PERST# signal controller
     (Rafał Miłecki)

  Cadence PCIe controller driver:
   - Retrain Link to work around Gen2 training defect (Nadeem Athani)
   - Fix merge botch in cdns_pcie_host_map_dma_ranges() (Krzysztof
     Wilczyński)

  Freescale Layerscape PCIe controller driver:
   - Add LX2160A rev2 EP mode support (Hou Zhiqiang)
   - Convert to builtin_platform_driver() (Michael Walle)

  MediaTek PCIe controller driver:
   - Fix OF node reference leak (Krzysztof Wilczyński)

  Microchip PolarFlare PCIe controller driver:
   - Add Microchip PolarFire PCIe controller driver (Daire McNamara)

  Qualcomm PCIe controller driver:
   - Use PHY_REFCLK_USE_PAD only for ipq8064 (Ansuel Smith)
   - Add support for ddrss_sf_tbu clock for sm8250 (Dmitry Baryshkov)

  Renesas R-Car PCIe controller driver:
   - Drop PCIE_RCAR config option (Lad Prabhakar)
   - Always allocate MSI addresses in 32bit space (Marek Vasut)

  Rockchip PCIe controller driver:
   - Add FriendlyARM NanoPi M4B DT binding (Chen-Yu Tsai)
   - Make 'ep-gpios' DT property optional (Chen-Yu Tsai)

  Synopsys DesignWare PCIe controller driver:
   - Work around ECRC configuration hardware defect (Vidya Sagar)
   - Drop support for config space in DT 'ranges' (Rob Herring)
   - Change size to u64 for EP outbound iATU (Shradha Todi)
   - Add upper limit address for outbound iATU (Shradha Todi)
   - Make dw_pcie ops optional (Jisheng Zhang)
   - Remove unnecessary dw_pcie_ops from al driver (Jisheng Zhang)

  Xilinx Versal CPM PCIe controller driver:
   - Fix OF node reference leak (Pan Bian)

  Miscellaneous:
   - Remove tango host controller driver (Arnd Bergmann)
   - Remove IRQ handler & data together (altera-msi, brcmstb, dwc)
     (Martin Kaiser)
   - Fix xgene-msi race in installing chained IRQ handler (Martin
     Kaiser)
   - Apply CONFIG_PCI_DEBUG to entire drivers/pci hierarchy (Junhao He)
   - Fix pci-bridge-emul array overruns (Russell King)
   - Remove obsolete uses of WARN_ON(in_interrupt()) (Sebastian Andrzej
     Siewior)"

* tag 'pci-v5.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (69 commits)
  PCI: qcom: Use PHY_REFCLK_USE_PAD only for ipq8064
  PCI: qcom: Add support for ddrss_sf_tbu clock
  dt-bindings: PCI: qcom: Document ddrss_sf_tbu clock for sm8250
  PCI: al: Remove useless dw_pcie_ops
  PCI: dwc: Don't assume the ops in dw_pcie always exist
  PCI: dwc: Add upper limit address for outbound iATU
  PCI: dwc: Change size to u64 for EP outbound iATU
  PCI: dwc: Drop support for config space in 'ranges'
  PCI: layerscape: Convert to builtin_platform_driver()
  PCI: layerscape: Add LX2160A rev2 EP mode support
  dt-bindings: PCI: layerscape: Add LX2160A rev2 compatible strings
  PCI: dwc: Work around ECRC configuration issue
  PCI/portdrv: Report reset for frozen channel
  PCI/AER: Specify the type of Port that was reset
  PCI/ERR: Retain status from error notification
  PCI/AER: Clear AER status from Root Port when resetting Downstream Port
  PCI/ERR: Clear status of the reporting device
  dt-bindings: arm: rockchip: Add FriendlyARM NanoPi M4B
  PCI: rockchip: Make 'ep-gpios' DT property optional
  Documentation: PCI: Add PCI endpoint NTB function user guide
  ...

- Remove IRQ handler & data together for altera, brcmstb, dwc (Martin
  Kaiser)

- Fix xgene race in installing chained IRQ handler (Martin Kaiser)

- Drop PCIE_RCAR config option (replaced by PCIE_RCAR_HOST) (Lad Prabhakar)

- Fix xgene comment about CRS vs CRS SV (Bjorn Helgaas)

* remotes/lorenzo/pci/misc:
  PCI: hv: Fix typo
  PCI: xgene: Fix CRS SV comment
  PCI: brcmstb: Remove chained IRQ handler and data in one go
  PCI: Drop PCIE_RCAR config option
  PCI: xgene-msi: Fix race in installing chained irq handler
  PCI: dwc: Remove IRQ handler and data in one go
  PCI: altera-msi: Remove IRQ handler and data in one go

- Fix reference count leak on error path (Pan Bian)

* remotes/lorenzo/pci/xilinx:
  PCI: xilinx-cpm: Fix reference count leak on error path

- Remove tango host controller driver (Arnd Bergmann)

* remotes/lorenzo/pci/tango:
  PCI: Remove tango host controller driver

# Conflicts:
#	drivers/pci/controller/Makefile

- Make 'ep-gpios' DT property optional (Chen-Yu Tsai)

- Add FriendlyARM NanoPi M4B to rockchip DT binding (Chen-Yu Tsai)

* pci/rockchip:
  dt-bindings: arm: rockchip: Add FriendlyARM NanoPi M4B
  PCI: rockchip: Make 'ep-gpios' DT property optional

- Always allocate rcar MSI addresses in 32-bit space so legacy devices
  without 64-bit MSI support can use MSI (Marek Vasut)

* remotes/lorenzo/pci/rcar:
  PCI: rcar: Always allocate MSI addresses in 32bit space

- Add support for SM8250 PCIe SF TBU clock (Dmitry Baryshkov)

- Use PHY_REFCLK_USE_PAD only for qcom ipq8064 (Ansuel Smith)

* pci/qcom:
  PCI: qcom: Use PHY_REFCLK_USE_PAD only for ipq8064
  PCI: qcom: Add support for ddrss_sf_tbu clock
  dt-bindings: PCI: qcom: Document ddrss_sf_tbu clock for sm8250

- Account for 64-bit BARs in pci_epc_get_first_free_bar() (Kishon Vijay
  Abraham I)

- Add pci_epc_get_next_free_bar() helper (Kishon Vijay Abraham I)

- Return error codes on failure of endpoint BAR interfaces (Kishon Vijay
  Abraham I)

- Remove unused pci_epf_match_device() (Kishon Vijay Abraham I)

- Add support for secondary endpoint controller to prepare for NTB endpoint
  functionality (Kishon Vijay Abraham I)

- Add configfs support for secondary endpoint controller (Kishon Vijay
  Abraham I)

- Add MSI address mapping ops for NTB doorbell support (Kishon Vijay
  Abraham I)

- Add ops for endpoint function-specific attributes (Kishon Vijay Abraham
  I)

- Allow configfs subdirectory for endpoint function configuration (Kishon
  Vijay Abraham I)

- Implement cadence MSI address mapping ops (Kishon Vijay Abraham I)

- Configure cadence LM_EP_FUNC_CFG based on epc->function_num_map (Kishon
  Vijay Abraham I)

- Add endpoint-side driver to provide NTB functionality (Kishon Vijay
  Abraham I)

- Add host-side driver for generic EPF NTB functionality (Kishon Vijay
  Abraham I)

- Document NTB endpoint functionality (Kishon Vijay Abraham I)

* pci/ntb:
  Documentation: PCI: Add PCI endpoint NTB function user guide
  Documentation: PCI: Add configfs binding documentation for pci-ntb endpoint function
  NTB: Add support for EPF PCI Non-Transparent Bridge
  PCI: Add TI J721E device to PCI IDs
  PCI: endpoint: Add EP function driver to provide NTB functionality
  PCI: cadence: Configure LM_EP_FUNC_CFG based on epc->function_num_map
  PCI: cadence: Implement ->msi_map_irq() ops
  PCI: endpoint: Allow user to create sub-directory of 'EPF Device' directory
  PCI: endpoint: Add pci_epf_ops to expose function-specific attrs
  PCI: endpoint: Add pci_epc_ops to map MSI IRQ
  PCI: endpoint: Add support in configfs to associate two EPCs with EPF
  PCI: endpoint: Add support to associate secondary EPC with EPF
  PCI: endpoint: Remove unused pci_epf_match_device()
  PCI: endpoint: Make *_free_bar() to return error codes on failure
  PCI: endpoint: Add helper API to get the 'next' unreserved BAR
  PCI: endpoint: Make *_get_first_free_bar() take into account 64 bit BAR
  Documentation: PCI: Add specification for the PCI NTB function device

- Call platform_set_drvdata() earlier so drivers can do window setup in
  init functions instead of custom probe (Daire McNamara)

- Add DT binding and host mode driver for Microchip PolarFire PCIe
  controller (Daire McNamara)

* pci/microchip:
  MAINTAINERS: Add Daire McNamara as Microchip PCIe driver maintainer
  PCI: microchip: Add Microchip PolarFire PCIe controller driver
  dt-bindings: PCI: microchip: Add Microchip PolarFire host binding
  PCI: Call platform_set_drvdata earlier in devm_pci_alloc_host_bridge

- Fix of_node_put() reference leak (Krzysztof Wilczyński)

* remotes/lorenzo/pci/mediatek:
  PCI: mediatek: Add missing of_node_put() to fix reference leak