linux-stable.git/drivers/pci/controller, branch v4.20.2 Linux kernel stable tree PCI: dwc: Fix MSI-X EP framework address calculation bug 2018-11-27T11:23:31+00:00 Gustavo Pimentel gustavo.pimentel@synopsys.com 2018-11-23T17:00:21+00:00 15cb127e3c8f6232096d5dba6a5b4046bc292d70 Fix an error caused by 3-bit right rotation on offset address calculation of MSI-X table in dw_pcie_ep_raise_msix_irq(). The initial testing code was setting by default the offset address of MSI-X table to zero, so that even with a 3-bit right rotation the computed result would still be zero and valid, therefore this bug went unnoticed. Fixes: beb4641a787d ("PCI: dwc: Add MSI-X callbacks handler") Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org 
Fix an error caused by 3-bit right rotation on offset address
calculation of MSI-X table in dw_pcie_ep_raise_msix_irq().

The initial testing code was setting by default the offset address of
MSI-X table to zero, so that even with a 3-bit right rotation the
computed result would still be zero and valid, therefore this bug went
unnoticed.

Fixes: beb4641a787d ("PCI: dwc: Add MSI-X callbacks handler")
Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
[lorenzo.pieralisi@arm.com: updated commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: stable@vger.kernel.org
PCI: layerscape: Fix wrong invocation of outbound window disable accessor 2018-11-20T11:09:51+00:00 Hou Zhiqiang Zhiqiang.Hou@nxp.com 2018-11-07T05:16:49+00:00 c6fd6fe9dea44732cdcd970f1130b8cc50ad685a The order of parameters is not correct when invoking the outbound window disable routine. Fix it. Fixes: 4a2745d760fa ("PCI: layerscape: Disable outbound windows configured by bootloader") Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> [lorenzo.pieralisi@arm.com: commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org 
The order of parameters is not correct when invoking the outbound
window disable routine. Fix it.

Fixes: 4a2745d760fa ("PCI: layerscape: Disable outbound windows configured by bootloader")
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
[lorenzo.pieralisi@arm.com: commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: stable@vger.kernel.org
PCI: imx6: Fix link training status detection in link up check 2018-11-20T11:09:34+00:00 Trent Piepho tpiepho@impinj.com 2018-11-05T18:11:36+00:00 68bc10bf992180f269816ff3d22eb30383138577 This bug was introduced in the interaction for two commits on either branch of the merge commit 562df5c8521e ("Merge branch 'pci/host-designware' into next"). Commit 4d107d3b5a68 ("PCI: imx6: Move link up check into imx6_pcie_wait_for_link()"), changed imx6_pcie_wait_for_link() to poll the link status register directly, checking for link up and not training, and made imx6_pcie_link_up() only check the link up bit (once, not a polling loop). While commit 886bc5ceb5cc ("PCI: designware: Add generic dw_pcie_wait_for_link()"), replaced the loop in imx6_pcie_wait_for_link() with a call to a new dwc core function, which polled imx6_pcie_link_up(), which still checked both link up and not training in a loop. When these two commits were merged, the version of imx6_pcie_wait_for_link() from 886bc5ceb5cc was kept, which eliminated the link training check placed there by 4d107d3b5a68. However, the version of imx6_pcie_link_up() from 4d107d3b5a68 was kept, which eliminated the link training check that had been there and was moved to imx6_pcie_wait_for_link(). The result was the link training check got lost for the imx6 driver. Eliminate imx6_pcie_link_up() so that the default handler, dw_pcie_link_up(), is used instead. The default handler has the correct code, which checks for link up and also that it still is not training, fixing the regression. Fixes: 562df5c8521e ("Merge branch 'pci/host-designware' into next") Signed-off-by: Trent Piepho <tpiepho@impinj.com> [lorenzo.pieralisi@arm.com: rewrote the commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Joao Pinto <Joao.Pinto@synopsys.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Richard Zhu <hongxing.zhu@nxp.com> 
This bug was introduced in the interaction for two commits on either
branch of the merge commit 562df5c8521e ("Merge branch
'pci/host-designware' into next").

Commit 4d107d3b5a68 ("PCI: imx6: Move link up check into
imx6_pcie_wait_for_link()"), changed imx6_pcie_wait_for_link() to poll
the link status register directly, checking for link up and not
training, and made imx6_pcie_link_up() only check the link up bit (once,
not a polling loop).

While commit 886bc5ceb5cc ("PCI: designware: Add generic
dw_pcie_wait_for_link()"), replaced the loop in
imx6_pcie_wait_for_link() with a call to a new dwc core function, which
polled imx6_pcie_link_up(), which still checked both link up and not
training in a loop.

When these two commits were merged, the version of
imx6_pcie_wait_for_link() from 886bc5ceb5cc was kept, which eliminated
the link training check placed there by 4d107d3b5a68. However, the
version of imx6_pcie_link_up() from 4d107d3b5a68 was kept, which
eliminated the link training check that had been there and was moved to
imx6_pcie_wait_for_link().

The result was the link training check got lost for the imx6 driver.

Eliminate imx6_pcie_link_up() so that the default handler,
dw_pcie_link_up(), is used instead. The default handler has the correct
code, which checks for link up and also that it still is not training,
fixing the regression.

Fixes: 562df5c8521e ("Merge branch 'pci/host-designware' into next")
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
[lorenzo.pieralisi@arm.com: rewrote the commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Joao Pinto <Joao.Pinto@synopsys.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Richard Zhu <hongxing.zhu@nxp.com>
Merge tag 'pci-v4.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci 2018-10-25T13:50:48+00:00 Linus Torvalds torvalds@linux-foundation.org 2018-10-25T13:50:48+00:00 bd6bf7c10484f026505814b690104cdef27ed460 Pull PCI updates from Bjorn Helgaas: - Fix ASPM link_state teardown on removal (Lukas Wunner) - Fix misleading _OSC ASPM message (Sinan Kaya) - Make _OSC optional for PCI (Sinan Kaya) - Don't initialize ASPM link state when ACPI_FADT_NO_ASPM is set (Patrick Talbert) - Remove x86 and arm64 node-local allocation for host bridge structures (Punit Agrawal) - Pay attention to device-specific _PXM node values (Jonathan Cameron) - Support new Immediate Readiness bit (Felipe Balbi) - Differentiate between pciehp surprise and safe removal (Lukas Wunner) - Remove unnecessary pciehp includes (Lukas Wunner) - Drop pciehp hotplug_slot_ops wrappers (Lukas Wunner) - Tolerate PCIe Slot Presence Detect being hardwired to zero to workaround broken hardware, e.g., the Wilocity switch/wireless device (Lukas Wunner) - Unify pciehp controller & slot structs (Lukas Wunner) - Constify hotplug_slot_ops (Lukas Wunner) - Drop hotplug_slot_info (Lukas Wunner) - Embed hotplug_slot struct into users instead of allocating it separately (Lukas Wunner) - Initialize PCIe port service drivers directly instead of relying on initcall ordering (Keith Busch) - Restore PCI config state after a slot reset (Keith Busch) - Save/restore DPC config state along with other PCI config state (Keith Busch) - Reference count devices during AER handling to avoid race issue with concurrent hot removal (Keith Busch) - If an Upstream Port reports ERR_FATAL, don't try to read the Port's config space because it is probably unreachable (Keith Busch) - During error handling, use slot-specific reset instead of secondary bus reset to avoid link up/down issues on hotplug ports (Keith Busch) - Restore previous AER/DPC handling that does not remove and re-enumerate devices on ERR_FATAL (Keith Busch) - Notify all drivers that may be affected by error recovery resets (Keith Busch) - Always generate error recovery uevents, even if a driver doesn't have error callbacks (Keith Busch) - Make PCIe link active reporting detection generic (Keith Busch) - Support D3cold in PCIe hierarchies during system sleep and runtime, including hotplug and Thunderbolt ports (Mika Westerberg) - Handle hpmemsize/hpiosize kernel parameters uniformly, whether slots are empty or occupied (Jon Derrick) - Remove duplicated include from pci/pcie/err.c and unused variable from cpqphp (YueHaibing) - Remove driver pci_cleanup_aer_uncorrect_error_status() calls (Oza Pawandeep) - Uninline PCI bus accessors for better ftracing (Keith Busch) - Remove unused AER Root Port .error_resume method (Keith Busch) - Use kfifo in AER instead of a local version (Keith Busch) - Use threaded IRQ in AER bottom half (Keith Busch) - Use managed resources in AER core (Keith Busch) - Reuse pcie_port_find_device() for AER injection (Keith Busch) - Abstract AER interrupt handling to disconnect error injection (Keith Busch) - Refactor AER injection callbacks to simplify future improvments (Keith Busch) - Remove unused Netronome NFP32xx Device IDs (Jakub Kicinski) - Use bitmap_zalloc() for dma_alias_mask (Andy Shevchenko) - Add switch fall-through annotations (Gustavo A. R. Silva) - Remove unused Switchtec quirk variable (Joshua Abraham) - Fix pci.c kernel-doc warning (Randy Dunlap) - Remove trivial PCI wrappers for DMA APIs (Christoph Hellwig) - Add Intel GPU device IDs to spurious interrupt quirk (Bin Meng) - Run Switchtec DMA aliasing quirk only on NTB endpoints to avoid useless dmesg errors (Logan Gunthorpe) - Update Switchtec NTB documentation (Wesley Yung) - Remove redundant "default n" from Kconfig (Bartlomiej Zolnierkiewicz) - Avoid panic when drivers enable MSI/MSI-X twice (Tonghao Zhang) - Add PCI support for peer-to-peer DMA (Logan Gunthorpe) - Add sysfs group for PCI peer-to-peer memory statistics (Logan Gunthorpe) - Add PCI peer-to-peer DMA scatterlist mapping interface (Logan Gunthorpe) - Add PCI configfs/sysfs helpers for use by peer-to-peer users (Logan Gunthorpe) - Add PCI peer-to-peer DMA driver writer's documentation (Logan Gunthorpe) - Add block layer flag to indicate driver support for PCI peer-to-peer DMA (Logan Gunthorpe) - Map Infiniband scatterlists for peer-to-peer DMA if they contain P2P memory (Logan Gunthorpe) - Register nvme-pci CMB buffer as PCI peer-to-peer memory (Logan Gunthorpe) - Add nvme-pci support for PCI peer-to-peer memory in requests (Logan Gunthorpe) - Use PCI peer-to-peer memory in nvme (Stephen Bates, Steve Wise, Christoph Hellwig, Logan Gunthorpe) - Cache VF config space size to optimize enumeration of many VFs (KarimAllah Ahmed) - Remove unnecessary <linux/pci-ats.h> include (Bjorn Helgaas) - Fix VMD AERSID quirk Device ID matching (Jon Derrick) - Fix Cadence PHY handling during probe (Alan Douglas) - Signal Cadence Endpoint interrupts via AXI region 0 instead of last region (Alan Douglas) - Write Cadence Endpoint MSI interrupts with 32 bits of data (Alan Douglas) - Remove redundant controller tests for "device_type == pci" (Rob Herring) - Document R-Car E3 (R8A77990) bindings (Tho Vu) - Add device tree support for R-Car r8a7744 (Biju Das) - Drop unused mvebu PCIe capability code (Thomas Petazzoni) - Add shared PCI bridge emulation code (Thomas Petazzoni) - Convert mvebu to use shared PCI bridge emulation (Thomas Petazzoni) - Add aardvark Root Port emulation (Thomas Petazzoni) - Support 100MHz/200MHz refclocks for i.MX6 (Lucas Stach) - Add initial power management for i.MX7 (Leonard Crestez) - Add PME_Turn_Off support for i.MX7 (Leonard Crestez) - Fix qcom runtime power management error handling (Bjorn Andersson) - Update TI dra7xx unaligned access errata workaround for host mode as well as endpoint mode (Vignesh R) - Fix kirin section mismatch warning (Nathan Chancellor) - Remove iproc PAXC slot check to allow VF support (Jitendra Bhivare) - Quirk Keystone K2G to limit MRRS to 256 (Kishon Vijay Abraham I) - Update Keystone to use MRRS quirk for host bridge instead of open coding (Kishon Vijay Abraham I) - Refactor Keystone link establishment (Kishon Vijay Abraham I) - Simplify and speed up Keystone link training (Kishon Vijay Abraham I) - Remove unused Keystone host_init argument (Kishon Vijay Abraham I) - Merge Keystone driver files into one (Kishon Vijay Abraham I) - Remove redundant Keystone platform_set_drvdata() (Kishon Vijay Abraham I) - Rename Keystone functions for uniformity (Kishon Vijay Abraham I) - Add Keystone device control module DT binding (Kishon Vijay Abraham I) - Use SYSCON API to get Keystone control module device IDs (Kishon Vijay Abraham I) - Clean up Keystone PHY handling (Kishon Vijay Abraham I) - Use runtime PM APIs to enable Keystone clock (Kishon Vijay Abraham I) - Clean up Keystone config space access checks (Kishon Vijay Abraham I) - Get Keystone outbound window count from DT (Kishon Vijay Abraham I) - Clean up Keystone outbound window configuration (Kishon Vijay Abraham I) - Clean up Keystone DBI setup (Kishon Vijay Abraham I) - Clean up Keystone ks_pcie_link_up() (Kishon Vijay Abraham I) - Fix Keystone IRQ status checking (Kishon Vijay Abraham I) - Add debug messages for all Keystone errors (Kishon Vijay Abraham I) - Clean up Keystone includes and macros (Kishon Vijay Abraham I) - Fix Mediatek unchecked return value from devm_pci_remap_iospace() (Gustavo A. R. Silva) - Fix Mediatek endpoint/port matching logic (Honghui Zhang) - Change Mediatek Root Port Class Code to PCI_CLASS_BRIDGE_PCI (Honghui Zhang) - Remove redundant Mediatek PM domain check (Honghui Zhang) - Convert Mediatek to pci_host_probe() (Honghui Zhang) - Fix Mediatek MSI enablement (Honghui Zhang) - Add Mediatek system PM support for MT2712 and MT7622 (Honghui Zhang) - Add Mediatek loadable module support (Honghui Zhang) - Detach VMD resources after stopping root bus to prevent orphan resources (Jon Derrick) - Convert pcitest build process to that used by other tools (iio, perf, etc) (Gustavo Pimentel) * tag 'pci-v4.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (140 commits) PCI/AER: Refactor error injection fallbacks PCI/AER: Abstract AER interrupt handling PCI/AER: Reuse existing pcie_port_find_device() interface PCI/AER: Use managed resource allocations PCI: pcie: Remove redundant 'default n' from Kconfig PCI: aardvark: Implement emulated root PCI bridge config space PCI: mvebu: Convert to PCI emulated bridge config space PCI: mvebu: Drop unused PCI express capability code PCI: Introduce PCI bridge emulated config space common logic PCI: vmd: Detach resources after stopping root bus nvmet: Optionally use PCI P2P memory nvmet: Introduce helper functions to allocate and free request SGLs nvme-pci: Add support for P2P memory in requests nvme-pci: Use PCI p2pmem subsystem to manage the CMB IB/core: Ensure we map P2P memory correctly in rdma_rw_ctx_[init|destroy]() block: Add PCI P2P flag for request queue PCI/P2PDMA: Add P2P DMA driver writer's documentation docs-rst: Add a new directory for PCI documentation PCI/P2PDMA: Introduce configfs/sysfs enable attribute helpers PCI/P2PDMA: Add PCI p2pmem DMA mappings to adjust the bus offset ... 
Pull PCI updates from Bjorn Helgaas:

 - Fix ASPM link_state teardown on removal (Lukas Wunner)

 - Fix misleading _OSC ASPM message (Sinan Kaya)

 - Make _OSC optional for PCI (Sinan Kaya)

 - Don't initialize ASPM link state when ACPI_FADT_NO_ASPM is set
   (Patrick Talbert)

 - Remove x86 and arm64 node-local allocation for host bridge structures
   (Punit Agrawal)

 - Pay attention to device-specific _PXM node values (Jonathan Cameron)

 - Support new Immediate Readiness bit (Felipe Balbi)

 - Differentiate between pciehp surprise and safe removal (Lukas Wunner)

 - Remove unnecessary pciehp includes (Lukas Wunner)

 - Drop pciehp hotplug_slot_ops wrappers (Lukas Wunner)

 - Tolerate PCIe Slot Presence Detect being hardwired to zero to
   workaround broken hardware, e.g., the Wilocity switch/wireless device
   (Lukas Wunner)

 - Unify pciehp controller & slot structs (Lukas Wunner)

 - Constify hotplug_slot_ops (Lukas Wunner)

 - Drop hotplug_slot_info (Lukas Wunner)

 - Embed hotplug_slot struct into users instead of allocating it
   separately (Lukas Wunner)

 - Initialize PCIe port service drivers directly instead of relying on
   initcall ordering (Keith Busch)

 - Restore PCI config state after a slot reset (Keith Busch)

 - Save/restore DPC config state along with other PCI config state
   (Keith Busch)

 - Reference count devices during AER handling to avoid race issue with
   concurrent hot removal (Keith Busch)

 - If an Upstream Port reports ERR_FATAL, don't try to read the Port's
   config space because it is probably unreachable (Keith Busch)

 - During error handling, use slot-specific reset instead of secondary
   bus reset to avoid link up/down issues on hotplug ports (Keith Busch)

 - Restore previous AER/DPC handling that does not remove and
   re-enumerate devices on ERR_FATAL (Keith Busch)

 - Notify all drivers that may be affected by error recovery resets
   (Keith Busch)

 - Always generate error recovery uevents, even if a driver doesn't have
   error callbacks (Keith Busch)

 - Make PCIe link active reporting detection generic (Keith Busch)

 - Support D3cold in PCIe hierarchies during system sleep and runtime,
   including hotplug and Thunderbolt ports (Mika Westerberg)

 - Handle hpmemsize/hpiosize kernel parameters uniformly, whether slots
   are empty or occupied (Jon Derrick)

 - Remove duplicated include from pci/pcie/err.c and unused variable
   from cpqphp (YueHaibing)

 - Remove driver pci_cleanup_aer_uncorrect_error_status() calls (Oza
   Pawandeep)

 - Uninline PCI bus accessors for better ftracing (Keith Busch)

 - Remove unused AER Root Port .error_resume method (Keith Busch)

 - Use kfifo in AER instead of a local version (Keith Busch)

 - Use threaded IRQ in AER bottom half (Keith Busch)

 - Use managed resources in AER core (Keith Busch)

 - Reuse pcie_port_find_device() for AER injection (Keith Busch)

 - Abstract AER interrupt handling to disconnect error injection (Keith
   Busch)

 - Refactor AER injection callbacks to simplify future improvments
   (Keith Busch)

 - Remove unused Netronome NFP32xx Device IDs (Jakub Kicinski)

 - Use bitmap_zalloc() for dma_alias_mask (Andy Shevchenko)

 - Add switch fall-through annotations (Gustavo A. R. Silva)

 - Remove unused Switchtec quirk variable (Joshua Abraham)

 - Fix pci.c kernel-doc warning (Randy Dunlap)

 - Remove trivial PCI wrappers for DMA APIs (Christoph Hellwig)

 - Add Intel GPU device IDs to spurious interrupt quirk (Bin Meng)

 - Run Switchtec DMA aliasing quirk only on NTB endpoints to avoid
   useless dmesg errors (Logan Gunthorpe)

 - Update Switchtec NTB documentation (Wesley Yung)

 - Remove redundant "default n" from Kconfig (Bartlomiej Zolnierkiewicz)

 - Avoid panic when drivers enable MSI/MSI-X twice (Tonghao Zhang)

 - Add PCI support for peer-to-peer DMA (Logan Gunthorpe)

 - Add sysfs group for PCI peer-to-peer memory statistics (Logan
   Gunthorpe)

 - Add PCI peer-to-peer DMA scatterlist mapping interface (Logan
   Gunthorpe)

 - Add PCI configfs/sysfs helpers for use by peer-to-peer users (Logan
   Gunthorpe)

 - Add PCI peer-to-peer DMA driver writer's documentation (Logan
   Gunthorpe)

 - Add block layer flag to indicate driver support for PCI peer-to-peer
   DMA (Logan Gunthorpe)

 - Map Infiniband scatterlists for peer-to-peer DMA if they contain P2P
   memory (Logan Gunthorpe)

 - Register nvme-pci CMB buffer as PCI peer-to-peer memory (Logan
   Gunthorpe)

 - Add nvme-pci support for PCI peer-to-peer memory in requests (Logan
   Gunthorpe)

 - Use PCI peer-to-peer memory in nvme (Stephen Bates, Steve Wise,
   Christoph Hellwig, Logan Gunthorpe)

 - Cache VF config space size to optimize enumeration of many VFs
   (KarimAllah Ahmed)

 - Remove unnecessary <linux/pci-ats.h> include (Bjorn Helgaas)

 - Fix VMD AERSID quirk Device ID matching (Jon Derrick)

 - Fix Cadence PHY handling during probe (Alan Douglas)

 - Signal Cadence Endpoint interrupts via AXI region 0 instead of last
   region (Alan Douglas)

 - Write Cadence Endpoint MSI interrupts with 32 bits of data (Alan
   Douglas)

 - Remove redundant controller tests for "device_type == pci" (Rob
   Herring)

 - Document R-Car E3 (R8A77990) bindings (Tho Vu)

 - Add device tree support for R-Car r8a7744 (Biju Das)

 - Drop unused mvebu PCIe capability code (Thomas Petazzoni)

 - Add shared PCI bridge emulation code (Thomas Petazzoni)

 - Convert mvebu to use shared PCI bridge emulation (Thomas Petazzoni)

 - Add aardvark Root Port emulation (Thomas Petazzoni)

 - Support 100MHz/200MHz refclocks for i.MX6 (Lucas Stach)

 - Add initial power management for i.MX7 (Leonard Crestez)

 - Add PME_Turn_Off support for i.MX7 (Leonard Crestez)

 - Fix qcom runtime power management error handling (Bjorn Andersson)

 - Update TI dra7xx unaligned access errata workaround for host mode as
   well as endpoint mode (Vignesh R)

 - Fix kirin section mismatch warning (Nathan Chancellor)

 - Remove iproc PAXC slot check to allow VF support (Jitendra Bhivare)

 - Quirk Keystone K2G to limit MRRS to 256 (Kishon Vijay Abraham I)

 - Update Keystone to use MRRS quirk for host bridge instead of open
   coding (Kishon Vijay Abraham I)

 - Refactor Keystone link establishment (Kishon Vijay Abraham I)

 - Simplify and speed up Keystone link training (Kishon Vijay Abraham I)

 - Remove unused Keystone host_init argument (Kishon Vijay Abraham I)

 - Merge Keystone driver files into one (Kishon Vijay Abraham I)

 - Remove redundant Keystone platform_set_drvdata() (Kishon Vijay
   Abraham I)

 - Rename Keystone functions for uniformity (Kishon Vijay Abraham I)

 - Add Keystone device control module DT binding (Kishon Vijay Abraham
   I)

 - Use SYSCON API to get Keystone control module device IDs (Kishon
   Vijay Abraham I)

 - Clean up Keystone PHY handling (Kishon Vijay Abraham I)

 - Use runtime PM APIs to enable Keystone clock (Kishon Vijay Abraham I)

 - Clean up Keystone config space access checks (Kishon Vijay Abraham I)

 - Get Keystone outbound window count from DT (Kishon Vijay Abraham I)

 - Clean up Keystone outbound window configuration (Kishon Vijay Abraham
   I)

 - Clean up Keystone DBI setup (Kishon Vijay Abraham I)

 - Clean up Keystone ks_pcie_link_up() (Kishon Vijay Abraham I)

 - Fix Keystone IRQ status checking (Kishon Vijay Abraham I)

 - Add debug messages for all Keystone errors (Kishon Vijay Abraham I)

 - Clean up Keystone includes and macros (Kishon Vijay Abraham I)

 - Fix Mediatek unchecked return value from devm_pci_remap_iospace()
   (Gustavo A. R. Silva)

 - Fix Mediatek endpoint/port matching logic (Honghui Zhang)

 - Change Mediatek Root Port Class Code to PCI_CLASS_BRIDGE_PCI (Honghui
   Zhang)

 - Remove redundant Mediatek PM domain check (Honghui Zhang)

 - Convert Mediatek to pci_host_probe() (Honghui Zhang)

 - Fix Mediatek MSI enablement (Honghui Zhang)

 - Add Mediatek system PM support for MT2712 and MT7622 (Honghui Zhang)

 - Add Mediatek loadable module support (Honghui Zhang)

 - Detach VMD resources after stopping root bus to prevent orphan
   resources (Jon Derrick)

 - Convert pcitest build process to that used by other tools (iio, perf,
   etc) (Gustavo Pimentel)

* tag 'pci-v4.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (140 commits)
  PCI/AER: Refactor error injection fallbacks
  PCI/AER: Abstract AER interrupt handling
  PCI/AER: Reuse existing pcie_port_find_device() interface
  PCI/AER: Use managed resource allocations
  PCI: pcie: Remove redundant 'default n' from Kconfig
  PCI: aardvark: Implement emulated root PCI bridge config space
  PCI: mvebu: Convert to PCI emulated bridge config space
  PCI: mvebu: Drop unused PCI express capability code
  PCI: Introduce PCI bridge emulated config space common logic
  PCI: vmd: Detach resources after stopping root bus
  nvmet: Optionally use PCI P2P memory
  nvmet: Introduce helper functions to allocate and free request SGLs
  nvme-pci: Add support for P2P memory in requests
  nvme-pci: Use PCI p2pmem subsystem to manage the CMB
  IB/core: Ensure we map P2P memory correctly in rdma_rw_ctx_[init|destroy]()
  block: Add PCI P2P flag for request queue
  PCI/P2PDMA: Add P2P DMA driver writer's documentation
  docs-rst: Add a new directory for PCI documentation
  PCI/P2PDMA: Introduce configfs/sysfs enable attribute helpers
  PCI/P2PDMA: Add PCI p2pmem DMA mappings to adjust the bus offset
  ...
Merge tag 'dma-mapping-4.20' of git://git.infradead.org/users/hch/dma-mapping 2018-10-22T17:16:03+00:00 Linus Torvalds torvalds@linux-foundation.org 2018-10-22T17:16:03+00:00 cff229491af5df946781edfbeafd43e9cf66a3b4 Pull dma mapping updates from Christoph Hellwig: "First batch of dma-mapping changes for 4.20. There will be a second PR as some big changes were only applied just before the end of the merge window, and I want to give them a few more days in linux-next. Summary: - mostly more consolidation of the direct mapping code, including converting over hexagon, and merging the coherent and non-coherent code into a single dma_map_ops instance (me) - cleanups for the dma_configure/dma_unconfigure callchains (me) - better handling of dma_masks in odd setups (me, Alexander Duyck) - better debugging of passing vmalloc address to the DMA API (Stephen Boyd) - CMA command line parsing fix (He Zhe)" * tag 'dma-mapping-4.20' of git://git.infradead.org/users/hch/dma-mapping: (27 commits) dma-direct: respect DMA_ATTR_NO_WARN dma-mapping: translate __GFP_NOFAIL to DMA_ATTR_NO_WARN dma-direct: document the zone selection logic dma-debug: Check for drivers mapping invalid addresses in dma_map_single() dma-direct: fix return value of dma_direct_supported dma-mapping: move dma_default_get_required_mask under ifdef dma-direct: always allow dma mask <= physiscal memory size dma-direct: implement complete bus_dma_mask handling dma-direct: refine dma_direct_alloc zone selection dma-direct: add an explicit dma_direct_get_required_mask dma-mapping: make the get_required_mask method available unconditionally unicore32: remove swiotlb support Revert "dma-mapping: clear dev->dma_ops in arch_teardown_dma_ops" dma-mapping: support non-coherent devices in dma_common_get_sgtable dma-mapping: consolidate the dma mmap implementations dma-mapping: merge direct and noncoherent ops dma-mapping: move the dma_coherent flag to struct device MIPS: don't select DMA_MAYBE_COHERENT from DMA_PERDEV_COHERENT dma-mapping: add the missing ARCH_HAS_SYNC_DMA_FOR_CPU_ALL declaration dma-mapping: fix panic caused by passing empty cma command line argument ... 
Pull dma mapping updates from Christoph Hellwig:
 "First batch of dma-mapping changes for 4.20.

  There will be a second PR as some big changes were only applied just
  before the end of the merge window, and I want to give them a few more
  days in linux-next.

  Summary:

   - mostly more consolidation of the direct mapping code, including
     converting over hexagon, and merging the coherent and non-coherent
     code into a single dma_map_ops instance (me)

   - cleanups for the dma_configure/dma_unconfigure callchains (me)

   - better handling of dma_masks in odd setups (me, Alexander Duyck)

   - better debugging of passing vmalloc address to the DMA API (Stephen
     Boyd)

   - CMA command line parsing fix (He Zhe)"

* tag 'dma-mapping-4.20' of git://git.infradead.org/users/hch/dma-mapping: (27 commits)
  dma-direct: respect DMA_ATTR_NO_WARN
  dma-mapping: translate __GFP_NOFAIL to DMA_ATTR_NO_WARN
  dma-direct: document the zone selection logic
  dma-debug: Check for drivers mapping invalid addresses in dma_map_single()
  dma-direct: fix return value of dma_direct_supported
  dma-mapping: move dma_default_get_required_mask under ifdef
  dma-direct: always allow dma mask <= physiscal memory size
  dma-direct: implement complete bus_dma_mask handling
  dma-direct: refine dma_direct_alloc zone selection
  dma-direct: add an explicit dma_direct_get_required_mask
  dma-mapping: make the get_required_mask method available unconditionally
  unicore32: remove swiotlb support
  Revert "dma-mapping: clear dev->dma_ops in arch_teardown_dma_ops"
  dma-mapping: support non-coherent devices in dma_common_get_sgtable
  dma-mapping: consolidate the dma mmap implementations
  dma-mapping: merge direct and noncoherent ops
  dma-mapping: move the dma_coherent flag to struct device
  MIPS: don't select DMA_MAYBE_COHERENT from DMA_PERDEV_COHERENT
  dma-mapping: add the missing ARCH_HAS_SYNC_DMA_FOR_CPU_ALL declaration
  dma-mapping: fix panic caused by passing empty cma command line argument
  ...
Merge branch 'remotes/lorenzo/pci/vmd' 2018-10-20T16:45:55+00:00 Bjorn Helgaas bhelgaas@google.com 2018-10-20T16:45:55+00:00 7e4e95897663595323f3bbcf5b75d5bcaf5c1401 - Detach VMD resources after stopping root bus to prevent orphan resources (Jon Derrick) * remotes/lorenzo/pci/vmd: PCI: vmd: Detach resources after stopping root bus 
  - Detach VMD resources after stopping root bus to prevent orphan
    resources (Jon Derrick)

* remotes/lorenzo/pci/vmd:
  PCI: vmd: Detach resources after stopping root bus
Merge branch 'remotes/lorenzo/pci/mediatek' 2018-10-20T16:45:53+00:00 Bjorn Helgaas bhelgaas@google.com 2018-10-20T16:45:53+00:00 4dd4d99636778ab610ad7ccb96a20b015991bdcf - Fix Mediatek unchecked return value from devm_pci_remap_iospace() (Gustavo A. R. Silva) - Fix Mediatek endpoint/port matching logic (Honghui Zhang) - Change Mediatek Root Port Class Code to PCI_CLASS_BRIDGE_PCI (Honghui Zhang) - Remove redundant Mediatek PM domain check (Honghui Zhang) - Convert Mediatek to pci_host_probe() (Honghui Zhang) - Fix Mediatek MSI enablement (Honghui Zhang) - Add Mediatek system PM support for MT2712 and MT7622 (Honghui Zhang) - Add Mediatek loadable module support (Honghui Zhang) * remotes/lorenzo/pci/mediatek: PCI: mediatek: Add loadable kernel module support PCI: mediatek: Add system PM support for MT2712 and MT7622 PCI: mediatek: Fixup MSI enablement logic by enabling MSI before clocks PCI: mediatek: Convert to use pci_host_probe() PCI: mediatek: Remove the redundant dev->pm_domain check PCI: mediatek: Fix class type for MT7622 to PCI_CLASS_BRIDGE_PCI PCI: mediatek: Fix mtk_pcie_find_port() endpoint/port matching logic PCI: mediatek: Fix unchecked return value 
  - Fix Mediatek unchecked return value from devm_pci_remap_iospace()
    (Gustavo A. R. Silva)

  - Fix Mediatek endpoint/port matching logic (Honghui Zhang)

  - Change Mediatek Root Port Class Code to PCI_CLASS_BRIDGE_PCI (Honghui
    Zhang)

  - Remove redundant Mediatek PM domain check (Honghui Zhang)

  - Convert Mediatek to pci_host_probe() (Honghui Zhang)

  - Fix Mediatek MSI enablement (Honghui Zhang)

  - Add Mediatek system PM support for MT2712 and MT7622 (Honghui Zhang)

  - Add Mediatek loadable module support (Honghui Zhang)

* remotes/lorenzo/pci/mediatek:
  PCI: mediatek: Add loadable kernel module support
  PCI: mediatek: Add system PM support for MT2712 and MT7622
  PCI: mediatek: Fixup MSI enablement logic by enabling MSI before clocks
  PCI: mediatek: Convert to use pci_host_probe()
  PCI: mediatek: Remove the redundant dev->pm_domain check
  PCI: mediatek: Fix class type for MT7622 to PCI_CLASS_BRIDGE_PCI
  PCI: mediatek: Fix mtk_pcie_find_port() endpoint/port matching logic
  PCI: mediatek: Fix unchecked return value
Merge branch 'remotes/lorenzo/pci/keystone' 2018-10-20T16:45:51+00:00 Bjorn Helgaas bhelgaas@google.com 2018-10-20T16:45:51+00:00 fc23af0cb1efa4c5b0c7ecd226d827e4824a4dcf - Quirk Keystone K2G to limit MRRS to 256 (Kishon Vijay Abraham I) - Update Keystone to use MRRS quirk for host bridge instead of open coding (Kishon Vijay Abraham I) - Refactor Keystone link establishment (Kishon Vijay Abraham I) - Simplify and speed up Keystone link training (Kishon Vijay Abraham I) - Remove unused Keystone host_init argument (Kishon Vijay Abraham I) - Merge Keystone driver files into one (Kishon Vijay Abraham I) - Remove redundant Keystone platform_set_drvdata() (Kishon Vijay Abraham I) - Rename Keystone functions for uniformity (Kishon Vijay Abraham I) - Add Keystone device control module DT binding (Kishon Vijay Abraham I) - Use SYSCON API to get Keystone control module device IDs (Kishon Vijay Abraham I) - Clean up Keystone PHY handling (Kishon Vijay Abraham I) - Use runtime PM APIs to enable Keystone clock (Kishon Vijay Abraham I) - Clean up Keystone config space access checks (Kishon Vijay Abraham I) - Get Keystone outbound window count from DT (Kishon Vijay Abraham I) - Clean up Keystone outbound window configuration (Kishon Vijay Abraham I) - Clean up Keystone DBI setup (Kishon Vijay Abraham I) - Clean up Keystone ks_pcie_link_up() (Kishon Vijay Abraham I) - Fix Keystone IRQ status checking (Kishon Vijay Abraham I) - Add debug messages for all Keystone errors (Kishon Vijay Abraham I) - Clean up Keystone includes and macros (Kishon Vijay Abraham I) * remotes/lorenzo/pci/keystone: PCI: keystone: Cleanup macros defined in pci-keystone.c PCI: keystone: Reorder header file in alphabetical order PCI: keystone: Add debug error message for all errors PCI: keystone: Use ERR_IRQ_STATUS instead of ERR_IRQ_STATUS_RAW to get interrupt status PCI: keystone: Cleanup ks_pcie_link_up() PCI: keystone: Cleanup set_dbi_mode() and get_dbi_mode() PCI: keystone: Cleanup outbound window configuration PCI: keystone: Get number of outbound windows from DT PCI: keystone: Cleanup configuration space access PCI: keystone: Invoke runtime PM APIs to enable clock PCI: keystone: Cleanup PHY handling PCI: keystone: Use SYSCON APIs to get device ID from control module dt-bindings: PCI: keystone: Add bindings to get device control module PCI: keystone: Use uniform function naming convention PCI: keystone: Remove redundant platform_set_drvdata() invocation PCI: keystone: Merge pci-keystone-dw.c and pci-keystone.c PCI: keystone: Remove unused argument from ks_dw_pcie_host_init() PCI: keystone: Do not initiate link training multiple times PCI: keystone: Move dw_pcie_setup_rc() out of ks_pcie_establish_link() PCI: keystone: Use quirk to set MRRS for PCI host bridge PCI: keystone: Use quirk to limit MRRS for K2G 
  - Quirk Keystone K2G to limit MRRS to 256 (Kishon Vijay Abraham I)

  - Update Keystone to use MRRS quirk for host bridge instead of open
    coding (Kishon Vijay Abraham I)

  - Refactor Keystone link establishment (Kishon Vijay Abraham I)

  - Simplify and speed up Keystone link training (Kishon Vijay Abraham I)

  - Remove unused Keystone host_init argument (Kishon Vijay Abraham I)

  - Merge Keystone driver files into one (Kishon Vijay Abraham I)

  - Remove redundant Keystone platform_set_drvdata() (Kishon Vijay Abraham
    I)

  - Rename Keystone functions for uniformity (Kishon Vijay Abraham I)

  - Add Keystone device control module DT binding (Kishon Vijay Abraham I)

  - Use SYSCON API to get Keystone control module device IDs (Kishon Vijay
    Abraham I)

  - Clean up Keystone PHY handling (Kishon Vijay Abraham I)

  - Use runtime PM APIs to enable Keystone clock (Kishon Vijay Abraham I)

  - Clean up Keystone config space access checks (Kishon Vijay Abraham I)

  - Get Keystone outbound window count from DT (Kishon Vijay Abraham I)

  - Clean up Keystone outbound window configuration (Kishon Vijay Abraham
    I)

  - Clean up Keystone DBI setup (Kishon Vijay Abraham I)

  - Clean up Keystone ks_pcie_link_up() (Kishon Vijay Abraham I)

  - Fix Keystone IRQ status checking (Kishon Vijay Abraham I)

  - Add debug messages for all Keystone errors (Kishon Vijay Abraham I)

  - Clean up Keystone includes and macros (Kishon Vijay Abraham I)

* remotes/lorenzo/pci/keystone:
  PCI: keystone: Cleanup macros defined in pci-keystone.c
  PCI: keystone: Reorder header file in alphabetical order
  PCI: keystone: Add debug error message for all errors
  PCI: keystone: Use ERR_IRQ_STATUS instead of ERR_IRQ_STATUS_RAW to get interrupt status
  PCI: keystone: Cleanup ks_pcie_link_up()
  PCI: keystone: Cleanup set_dbi_mode() and get_dbi_mode()
  PCI: keystone: Cleanup outbound window configuration
  PCI: keystone: Get number of outbound windows from DT
  PCI: keystone: Cleanup configuration space access
  PCI: keystone: Invoke runtime PM APIs to enable clock
  PCI: keystone: Cleanup PHY handling
  PCI: keystone: Use SYSCON APIs to get device ID from control module
  dt-bindings: PCI: keystone: Add bindings to get device control module
  PCI: keystone: Use uniform function naming convention
  PCI: keystone: Remove redundant platform_set_drvdata() invocation
  PCI: keystone: Merge pci-keystone-dw.c and pci-keystone.c
  PCI: keystone: Remove unused argument from ks_dw_pcie_host_init()
  PCI: keystone: Do not initiate link training multiple times
  PCI: keystone: Move dw_pcie_setup_rc() out of ks_pcie_establish_link()
  PCI: keystone: Use quirk to set MRRS for PCI host bridge
  PCI: keystone: Use quirk to limit MRRS for K2G
Merge branch 'remotes/lorenzo/pci/iproc' 2018-10-20T16:45:50+00:00 Bjorn Helgaas bhelgaas@google.com 2018-10-20T16:45:50+00:00 deab1f261cd34ed1c0d9b6558c6ce90fd49a431e - Remove iproc PAXC slot check to allow VF support (Jitendra Bhivare) * remotes/lorenzo/pci/iproc: PCI: iproc: Remove PAXC slot check to allow VF support 
  - Remove iproc PAXC slot check to allow VF support (Jitendra Bhivare)

* remotes/lorenzo/pci/iproc:
  PCI: iproc: Remove PAXC slot check to allow VF support
Merge branch 'remotes/lorenzo/pci/dwc' 2018-10-20T16:45:49+00:00 Bjorn Helgaas bhelgaas@google.com 2018-10-20T16:45:49+00:00 525fde0750394dd3874937361570764f6a368e33 - Support 100MHz/200MHz refclocks for i.MX6 (Lucas Stach) - Add initial power management for i.MX7 (Leonard Crestez) - Add PME_Turn_Off support for i.MX7 (Leonard Crestez) - Fix qcom runtime power management error handling (Bjorn Andersson) - Update TI dra7xx unaligned access errata workaround for host mode as well as endpoint mode (Vignesh R) - Fix kirin section mismatch warning (Nathan Chancellor) * remotes/lorenzo/pci/dwc: PCI: imx: Add PME_Turn_Off support ARM: dts: imx7d: Add turnoff reset dt-bindings: imx6q-pcie: Add turnoff reset for imx7d reset: imx7: Add PCIE_CTRL_APPS_TURNOFF PCI: kirin: Fix section mismatch warning PCI: dwc: pci-dra7xx: Enable errata i870 for both EP and RC mode dt-bindings: PCI: dra7xx: Add bindings for unaligned access in host mode PCI: qcom: Fix error handling in runtime PM support PCI: imx: Initial imx7d pm support PCI: imx6: Support MPLL reconfiguration for 100MHz and 200MHz refclock 
  - Support 100MHz/200MHz refclocks for i.MX6 (Lucas Stach)

  - Add initial power management for i.MX7 (Leonard Crestez)

  - Add PME_Turn_Off support for i.MX7 (Leonard Crestez)

  - Fix qcom runtime power management error handling (Bjorn Andersson)

  - Update TI dra7xx unaligned access errata workaround for host mode as
    well as endpoint mode (Vignesh R)

  - Fix kirin section mismatch warning (Nathan Chancellor)

* remotes/lorenzo/pci/dwc:
  PCI: imx: Add PME_Turn_Off support
  ARM: dts: imx7d: Add turnoff reset
  dt-bindings: imx6q-pcie: Add turnoff reset for imx7d
  reset: imx7: Add PCIE_CTRL_APPS_TURNOFF
  PCI: kirin: Fix section mismatch warning
  PCI: dwc: pci-dra7xx: Enable errata i870 for both EP and RC mode
  dt-bindings: PCI: dra7xx: Add bindings for unaligned access in host mode
  PCI: qcom: Fix error handling in runtime PM support
  PCI: imx: Initial imx7d pm support
  PCI: imx6: Support MPLL reconfiguration for 100MHz and 200MHz refclock