linux-stable.git/drivers/pci/controller, branch v4.19.86 Linux kernel stable tree PCI: mediatek: Fix unchecked return value 2019-11-20T17:46:53+00:00 Gustavo A. R. Silva gustavo@embeddedor.com 2018-07-20T15:01:58+00:00 d15e5038213ec28e1df349ee1408018e032dce03 [ Upstream commit 17a0a1e5f6c4bd6df17834312ff577c1373d87b8 ] Check return value of devm_pci_remap_iospace(). Addresses-Coverity-ID: 1471965 ("Unchecked return value") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Honghui Zhang <honghui.zhang@mediatek.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 17a0a1e5f6c4bd6df17834312ff577c1373d87b8 ]

Check return value of devm_pci_remap_iospace().

Addresses-Coverity-ID: 1471965 ("Unchecked return value")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Honghui Zhang <honghui.zhang@mediatek.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
PCI: tegra: Enable Relaxed Ordering only for Tegra20 & Tegra30 2019-11-12T18:20:52+00:00 Vidya Sagar vidyas@nvidia.com 2019-07-04T15:04:28+00:00 8181146cd7de890cdfdda68ddc3730250887d7fc commit 7be142caabc4780b13a522c485abc806de5c4114 upstream. The PCI Tegra controller conversion to a device tree configurable driver in commit d1523b52bff3 ("PCI: tegra: Move PCIe driver to drivers/pci/host") implied that code for the driver can be compiled in for a kernel supporting multiple platforms. Unfortunately, a blind move of the code did not check that some of the quirks that were applied in arch/arm (eg enabling Relaxed Ordering on all PCI devices - since the quirk hook erroneously matches PCI_ANY_ID for both Vendor-ID and Device-ID) are now applied in all kernels that compile the PCI Tegra controlled driver, DT and ACPI alike. This is completely wrong, in that enablement of Relaxed Ordering is only required by default in Tegra20 platforms as described in the Tegra20 Technical Reference Manual (available at https://developer.nvidia.com/embedded/downloads#?search=tegra%202 in Section 34.1, where it is mentioned that Relaxed Ordering bit needs to be enabled in its root ports to avoid deadlock in hardware) and in the Tegra30 platforms for the same reasons (unfortunately not documented in the TRM). There is no other strict requirement on PCI devices Relaxed Ordering enablement on any other Tegra platforms or PCI host bridge driver. Fix this quite upsetting situation by limiting the vendor and device IDs to which the Relaxed Ordering quirk applies to the root ports in question, reported above. Signed-off-by: Vidya Sagar <vidyas@nvidia.com> [lorenzo.pieralisi@arm.com: completely rewrote the commit log/fixes tag] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 7be142caabc4780b13a522c485abc806de5c4114 upstream.

The PCI Tegra controller conversion to a device tree configurable
driver in commit d1523b52bff3 ("PCI: tegra: Move PCIe driver
to drivers/pci/host") implied that code for the driver can be
compiled in for a kernel supporting multiple platforms.

Unfortunately, a blind move of the code did not check that some of the
quirks that were applied in arch/arm (eg enabling Relaxed Ordering on
all PCI devices - since the quirk hook erroneously matches PCI_ANY_ID
for both Vendor-ID and Device-ID) are now applied in all kernels that
compile the PCI Tegra controlled driver, DT and ACPI alike.

This is completely wrong, in that enablement of Relaxed Ordering is only
required by default in Tegra20 platforms as described in the Tegra20
Technical Reference Manual (available at
https://developer.nvidia.com/embedded/downloads#?search=tegra%202 in
Section 34.1, where it is mentioned that Relaxed Ordering bit needs to
be enabled in its root ports to avoid deadlock in hardware) and in the
Tegra30 platforms for the same reasons (unfortunately not documented
in the TRM).

There is no other strict requirement on PCI devices Relaxed Ordering
enablement on any other Tegra platforms or PCI host bridge driver.

Fix this quite upsetting situation by limiting the vendor and device IDs
to which the Relaxed Ordering quirk applies to the root ports in
question, reported above.

Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
[lorenzo.pieralisi@arm.com: completely rewrote the commit log/fixes tag]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI: vmd: Fix config addressing when using bus offsets 2019-10-17T20:45:44+00:00 Jon Derrick jonathan.derrick@intel.com 2019-09-16T13:54:34+00:00 91849adc9f90623127bf4cc04483ba9d41c7a12a commit e3dffa4f6c3612dea337c9c59191bd418afc941b upstream. VMD maps child device config spaces to the VMD Config BAR linearly regardless of the starting bus offset. Because of this, the config address decode must ignore starting bus offsets when mapping the BDF to the config space address. Fixes: 2a5a9c9a20f9 ("PCI: vmd: Add offset to bus numbers if necessary") Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org # v5.2+ Signed-off-by: Sushma Kalakota <sushmax.kalakota@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit e3dffa4f6c3612dea337c9c59191bd418afc941b upstream.

VMD maps child device config spaces to the VMD Config BAR linearly
regardless of the starting bus offset. Because of this, the config
address decode must ignore starting bus offsets when mapping the BDF to
the config space address.

Fixes: 2a5a9c9a20f9 ("PCI: vmd: Add offset to bus numbers if necessary")
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Sushma Kalakota <sushmax.kalakota@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI: vmd: Fix shadow offsets to reflect spec changes 2019-10-11T16:20:59+00:00 Jon Derrick jonathan.derrick@intel.com 2019-09-16T13:54:35+00:00 956ce989c41f70f945a36827cf5c74a1439ef5ae commit a1a30170138c9c5157bd514ccd4d76b47060f29b upstream. The shadow offset scratchpad was moved to 0x2000-0x2010. Update the location to get the correct shadow offset. Fixes: 6788958e4f3c ("PCI: vmd: Assign membar addresses from shadow registers") Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org # v5.2+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit a1a30170138c9c5157bd514ccd4d76b47060f29b upstream.

The shadow offset scratchpad was moved to 0x2000-0x2010. Update the
location to get the correct shadow offset.

Fixes: 6788958e4f3c ("PCI: vmd: Assign membar addresses from shadow registers")
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI: exynos: Propagate errors for optional PHYs 2019-10-07T16:57:13+00:00 Thierry Reding treding@nvidia.com 2019-08-29T10:53:15+00:00 69a32a7306ddbd59ea5f917652b44c3da346774c [ Upstream commit ddd6960087d4b45759434146d681a94bbb1c54ad ] devm_of_phy_get() can fail for a number of reasons besides probe deferral. It can for example return -ENOMEM if it runs out of memory as it tries to allocate devres structures. Propagating only -EPROBE_DEFER is problematic because it results in these legitimately fatal errors being treated as "PHY not specified in DT". What we really want is to ignore the optional PHYs only if they have not been specified in DT. devm_of_phy_get() returns -ENODEV in this case, so that's the special case that we need to handle. So we propagate all errors, except -ENODEV, so that real failures will still cause the driver to fail probe. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Cc: Jingoo Han <jingoohan1@gmail.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit ddd6960087d4b45759434146d681a94bbb1c54ad ]

devm_of_phy_get() can fail for a number of reasons besides probe
deferral. It can for example return -ENOMEM if it runs out of memory as
it tries to allocate devres structures. Propagating only -EPROBE_DEFER
is problematic because it results in these legitimately fatal errors
being treated as "PHY not specified in DT".

What we really want is to ignore the optional PHYs only if they have not
been specified in DT. devm_of_phy_get() returns -ENODEV in this case, so
that's the special case that we need to handle. So we propagate all
errors, except -ENODEV, so that real failures will still cause the
driver to fail probe.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
PCI: imx6: Propagate errors for optional regulators 2019-10-07T16:57:13+00:00 Thierry Reding treding@nvidia.com 2019-08-29T10:53:16+00:00 1264d2e7b75bb94c081393d7d6216b3f0756c65b [ Upstream commit 2170a09fb4b0f66e06e5bcdcbc98c9ccbf353650 ] regulator_get_optional() can fail for a number of reasons besides probe deferral. It can for example return -ENOMEM if it runs out of memory as it tries to allocate data structures. Propagating only -EPROBE_DEFER is problematic because it results in these legitimately fatal errors being treated as "regulator not specified in DT". What we really want is to ignore the optional regulators only if they have not been specified in DT. regulator_get_optional() returns -ENODEV in this case, so that's the special case that we need to handle. So we propagate all errors, except -ENODEV, so that real failures will still cause the driver to fail probe. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Cc: Richard Zhu <hongxing.zhu@nxp.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: kernel@pengutronix.de Cc: linux-imx@nxp.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 2170a09fb4b0f66e06e5bcdcbc98c9ccbf353650 ]

regulator_get_optional() can fail for a number of reasons besides probe
deferral. It can for example return -ENOMEM if it runs out of memory as
it tries to allocate data structures. Propagating only -EPROBE_DEFER is
problematic because it results in these legitimately fatal errors being
treated as "regulator not specified in DT".

What we really want is to ignore the optional regulators only if they
have not been specified in DT. regulator_get_optional() returns -ENODEV
in this case, so that's the special case that we need to handle. So we
propagate all errors, except -ENODEV, so that real failures will still
cause the driver to fail probe.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Cc: Richard Zhu <hongxing.zhu@nxp.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: kernel@pengutronix.de
Cc: linux-imx@nxp.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
PCI: histb: Propagate errors for optional regulators 2019-10-07T16:57:13+00:00 Thierry Reding treding@nvidia.com 2019-08-29T10:53:18+00:00 403d6c9284f12ad3ef556201a854e005523c22dc [ Upstream commit 8f9e1641ba445437095411d9fda2324121110d5d ] regulator_get_optional() can fail for a number of reasons besides probe deferral. It can for example return -ENOMEM if it runs out of memory as it tries to allocate data structures. Propagating only -EPROBE_DEFER is problematic because it results in these legitimately fatal errors being treated as "regulator not specified in DT". What we really want is to ignore the optional regulators only if they have not been specified in DT. regulator_get_optional() returns -ENODEV in this case, so that's the special case that we need to handle. So we propagate all errors, except -ENODEV, so that real failures will still cause the driver to fail probe. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Cc: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 8f9e1641ba445437095411d9fda2324121110d5d ]

regulator_get_optional() can fail for a number of reasons besides probe
deferral. It can for example return -ENOMEM if it runs out of memory as
it tries to allocate data structures. Propagating only -EPROBE_DEFER is
problematic because it results in these legitimately fatal errors being
treated as "regulator not specified in DT".

What we really want is to ignore the optional regulators only if they
have not been specified in DT. regulator_get_optional() returns -ENODEV
in this case, so that's the special case that we need to handle. So we
propagate all errors, except -ENODEV, so that real failures will still
cause the driver to fail probe.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Cc: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
PCI: rockchip: Propagate errors for optional regulators 2019-10-07T16:57:12+00:00 Thierry Reding treding@nvidia.com 2019-08-29T10:53:14+00:00 ac9c0e2ecc491ec84eb4413d94ae8901ef08d3ec [ Upstream commit 0e3ff0ac5f71bdb6be2a698de0ed0c7e6e738269 ] regulator_get_optional() can fail for a number of reasons besides probe deferral. It can for example return -ENOMEM if it runs out of memory as it tries to allocate data structures. Propagating only -EPROBE_DEFER is problematic because it results in these legitimately fatal errors being treated as "regulator not specified in DT". What we really want is to ignore the optional regulators only if they have not been specified in DT. regulator_get_optional() returns -ENODEV in this case, so that's the special case that we need to handle. So we propagate all errors, except -ENODEV, so that real failures will still cause the driver to fail probe. Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Shawn Lin <shawn.lin@rock-chips.com> Cc: Shawn Lin <shawn.lin@rock-chips.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: linux-rockchip@lists.infradead.org Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 0e3ff0ac5f71bdb6be2a698de0ed0c7e6e738269 ]

regulator_get_optional() can fail for a number of reasons besides probe
deferral. It can for example return -ENOMEM if it runs out of memory as
it tries to allocate data structures. Propagating only -EPROBE_DEFER is
problematic because it results in these legitimately fatal errors being
treated as "regulator not specified in DT".

What we really want is to ignore the optional regulators only if they
have not been specified in DT. regulator_get_optional() returns -ENODEV
in this case, so that's the special case that we need to handle. So we
propagate all errors, except -ENODEV, so that real failures will still
cause the driver to fail probe.

Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Shawn Lin <shawn.lin@rock-chips.com>
Cc: Shawn Lin <shawn.lin@rock-chips.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: linux-rockchip@lists.infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
PCI: tegra: Fix OF node reference leak 2019-10-07T16:57:09+00:00 Nishka Dasgupta nishkadg.linux@gmail.com 2019-07-24T08:24:12+00:00 3b7fbbddeb7a1d7f01026586077faa850d099b78 [ Upstream commit 9e38e690ace3e7a22a81fc02652fc101efb340cf ] Each iteration of for_each_child_of_node() executes of_node_put() on the previous node, but in some return paths in the middle of the loop of_node_put() is missing thus causing a reference leak. Hence stash these mid-loop return values in a variable 'err' and add a new label err_node_put which executes of_node_put() on the previous node and returns 'err' on failure. Change mid-loop return statements to point to jump to this label to fix the reference leak. Issue found with Coccinelle. Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> [lorenzo.pieralisi@arm.com: rewrote commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 9e38e690ace3e7a22a81fc02652fc101efb340cf ]

Each iteration of for_each_child_of_node() executes of_node_put() on the
previous node, but in some return paths in the middle of the loop
of_node_put() is missing thus causing a reference leak.

Hence stash these mid-loop return values in a variable 'err' and add a
new label err_node_put which executes of_node_put() on the previous node
and returns 'err' on failure.

Change mid-loop return statements to point to jump to this label to
fix the reference leak.

Issue found with Coccinelle.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
[lorenzo.pieralisi@arm.com: rewrote commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
PCI: hv: Avoid use of hv_pci_dev->pci_slot after freeing it 2019-10-01T06:26:09+00:00 Dexuan Cui decui@microsoft.com 2019-08-02T22:50:20+00:00 08fdaee2d97bdd55e03308b563783b2612670e8b [ Upstream commit 533ca1feed98b0bf024779a14760694c7cb4d431 ] The slot must be removed before the pci_dev is removed, otherwise a panic can happen due to use-after-free. Fixes: 15becc2b56c6 ("PCI: hv: Add hv_pci_remove_slots() when we unload the driver") Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 533ca1feed98b0bf024779a14760694c7cb4d431 ]

The slot must be removed before the pci_dev is removed, otherwise a panic
can happen due to use-after-free.

Fixes: 15becc2b56c6 ("PCI: hv: Add hv_pci_remove_slots() when we unload the driver")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>