linux-stable.git/drivers/pci/controller, branch linux-5.10.y Linux kernel stable tree PCI: mediatek: Fix IRQ domain leak when MSI allocation fails 2026-03-04T12:19:32+00:00 Haotian Zhang vulab@iscas.ac.cn 2025-11-19T02:33:08+00:00 51b30efdb39a1effa29c295f685adb9676867c94 [ Upstream commit 7f0cdcddf8bef1c8c18f9be6708073fd3790a20f ] In mtk_pcie_init_irq_domain(), if mtk_pcie_allocate_msi_domains() fails after port->irq_domain has been successfully created via irq_domain_create_linear(), the function returns directly without cleaning up the allocated IRQ domain, resulting in a resource leak. Add irq_domain_remove() call in the error path to properly release the INTx IRQ domain before returning the error. Fixes: 43e6409db64d ("PCI: mediatek: Add MSI support for MT2712 and MT7622") Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn> Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> Link: https://patch.msgid.link/20251119023308.476-1-vulab@iscas.ac.cn Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 7f0cdcddf8bef1c8c18f9be6708073fd3790a20f ]

In mtk_pcie_init_irq_domain(), if mtk_pcie_allocate_msi_domains()
fails after port->irq_domain has been successfully created via
irq_domain_create_linear(), the function returns directly without
cleaning up the allocated IRQ domain, resulting in a resource leak.

Add irq_domain_remove() call in the error path to properly release the
INTx IRQ domain before returning the error.

Fixes: 43e6409db64d ("PCI: mediatek: Add MSI support for MT2712 and MT7622")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20251119023308.476-1-vulab@iscas.ac.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
PCI: brcmstb: Fix disabling L0s capability 2026-01-19T12:12:04+00:00 Jim Quinlan james.quinlan@broadcom.com 2026-01-05T19:47:15+00:00 49b4a4e2a8d3e4776c308f87ce78ddf87616d307 [ Upstream commit 9583f9d22991d2cfb5cc59a2552040c4ae98d998 ] caab002d5069 ("PCI: brcmstb: Disable L0s component of ASPM if requested") set PCI_EXP_LNKCAP_ASPM_L1 and (optionally) PCI_EXP_LNKCAP_ASPM_L0S in PCI_EXP_LNKCAP (aka PCIE_RC_CFG_PRIV1_LINK_CAPABILITY in brcmstb). But instead of using PCI_EXP_LNKCAP_ASPM_L1 and PCI_EXP_LNKCAP_ASPM_L0S directly, it used PCIE_LINK_STATE_L1 and PCIE_LINK_STATE_L0S, which are Linux-created values that only coincidentally matched the PCIe spec. b478e162f227 ("PCI/ASPM: Consolidate link state defines") later changed them so they no longer matched the PCIe spec, so the bits ended up in the wrong place in PCI_EXP_LNKCAP. Use PCI_EXP_LNKCAP_ASPM_L0S to clear L0s support when there's an 'aspm-no-l0s' property. Rely on brcmstb hardware to advertise L0s and/or L1 support otherwise. Fixes: caab002d5069 ("PCI: brcmstb: Disable L0s component of ASPM if requested") Reported-by: Bjorn Helgaas <bhelgaas@google.com> Closes: https://lore.kernel.org/linux-pci/20250925194424.GA2197200@bhelgaas Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com> [mani: reworded subject and description, added closes tag and CCed stable] Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> [bhelgaas: commit log] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20251003170436.1446030-1-james.quinlan@broadcom.com [ Adjust context in variable declaration ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit 9583f9d22991d2cfb5cc59a2552040c4ae98d998 ]

caab002d5069 ("PCI: brcmstb: Disable L0s component of ASPM if requested")
set PCI_EXP_LNKCAP_ASPM_L1 and (optionally) PCI_EXP_LNKCAP_ASPM_L0S in
PCI_EXP_LNKCAP (aka PCIE_RC_CFG_PRIV1_LINK_CAPABILITY in brcmstb).

But instead of using PCI_EXP_LNKCAP_ASPM_L1 and PCI_EXP_LNKCAP_ASPM_L0S
directly, it used PCIE_LINK_STATE_L1 and PCIE_LINK_STATE_L0S, which are
Linux-created values that only coincidentally matched the PCIe spec.
b478e162f227 ("PCI/ASPM: Consolidate link state defines") later changed
them so they no longer matched the PCIe spec, so the bits ended up in the
wrong place in PCI_EXP_LNKCAP.

Use PCI_EXP_LNKCAP_ASPM_L0S to clear L0s support when there's an
'aspm-no-l0s' property.  Rely on brcmstb hardware to advertise L0s and/or
L1 support otherwise.

Fixes: caab002d5069 ("PCI: brcmstb: Disable L0s component of ASPM if requested")
Reported-by: Bjorn Helgaas <bhelgaas@google.com>
Closes: https://lore.kernel.org/linux-pci/20250925194424.GA2197200@bhelgaas
Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
[mani: reworded subject and description, added closes tag and CCed stable]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251003170436.1446030-1-james.quinlan@broadcom.com
[ Adjust context in variable declaration ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI: dwc: Fix wrong PORT_LOGIC_LTSSM_STATE_MASK definition 2026-01-19T12:11:34+00:00 Shawn Lin shawn.lin@rock-chips.com 2025-11-14T12:09:00+00:00 19dfc417ca09215200c0e9958971a83dafd2ac23 [ Upstream commit bcc9a4a0bca3aee4303fa4a20302e57b24ac8f68 ] As per DesignWare Cores PCI Express Controller Databook, section 5.50, SII: Debug Signals, cxpl_debug_info[63:0]: [5:0] smlh_ltssm_state: LTSSM current state. Encoding is same as the dedicated smlh_ltssm_state output. The mask should be 6 bits, from 0 to 5. Hence, fix the mask definition. Fixes: 23fe5bd4be90 ("PCI: keystone: Cleanup ks_pcie_link_up()") Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> [mani: reworded description] Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://patch.msgid.link/1763122140-203068-1-git-send-email-shawn.lin@rock-chips.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit bcc9a4a0bca3aee4303fa4a20302e57b24ac8f68 ]

As per DesignWare Cores PCI Express Controller Databook, section 5.50,
SII: Debug Signals, cxpl_debug_info[63:0]:

  [5:0] smlh_ltssm_state: LTSSM current state. Encoding is same as the
  dedicated smlh_ltssm_state output.

The mask should be 6 bits, from 0 to 5. Hence, fix the mask definition.

Fixes: 23fe5bd4be90 ("PCI: keystone: Cleanup ks_pcie_link_up()")
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
[mani: reworded description]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/1763122140-203068-1-git-send-email-shawn.lin@rock-chips.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
PCI: keystone: Exit ks_pcie_probe() for invalid mode 2026-01-19T12:11:31+00:00 Siddharth Vadapalli s-vadapalli@ti.com 2025-10-29T08:04:51+00:00 824262cf8344cb7f35142498a04416a3cec2fec6 [ Upstream commit 95d9c3f0e4546eaec0977f3b387549a8463cd49f ] Commit under Fixes introduced support for PCIe EP mode on AM654x platforms. When the mode happens to be either "DW_PCIE_RC_TYPE" or "DW_PCIE_EP_TYPE", the PCIe Controller is configured accordingly. However, when the mode is neither of them, an error message is displayed, but the driver probe succeeds. Since this "invalid" mode is not associated with a functional PCIe Controller, the probe should fail. Fix the behavior by exiting "ks_pcie_probe()" with the return value of "-EINVAL" in addition to displaying the existing error message when the mode is invalid. Fixes: 23284ad677a9 ("PCI: keystone: Add support for PCIe EP in AM654x Platforms") Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://patch.msgid.link/20251029080547.1253757-4-s-vadapalli@ti.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 95d9c3f0e4546eaec0977f3b387549a8463cd49f ]

Commit under Fixes introduced support for PCIe EP mode on AM654x platforms.
When the mode happens to be either "DW_PCIE_RC_TYPE" or "DW_PCIE_EP_TYPE",
the PCIe Controller is configured accordingly. However, when the mode is
neither of them, an error message is displayed, but the driver probe
succeeds. Since this "invalid" mode is not associated with a functional
PCIe Controller, the probe should fail.

Fix the behavior by exiting "ks_pcie_probe()" with the return value of
"-EINVAL" in addition to displaying the existing error message when the
mode is invalid.

Fixes: 23284ad677a9 ("PCI: keystone: Add support for PCIe EP in AM654x Platforms")
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20251029080547.1253757-4-s-vadapalli@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
PCI: cadence: Check for the existence of cdns_pcie::ops before using it 2025-12-06T21:08:14+00:00 Chen Wang unicorn_wang@outlook.com 2025-09-12T02:36:01+00:00 d5dbe92ac8a4ca6226093241f95f9cb1b0d2e0e1 [ Upstream commit 49a6c160ad4812476f8ae1a8f4ed6d15adfa6c09 ] cdns_pcie::ops might not be populated by all the Cadence glue drivers. This is going to be true for the upcoming Sophgo platform which doesn't set the ops. Hence, add a check to prevent NULL pointer dereference. Signed-off-by: Chen Wang <unicorn_wang@outlook.com> [mani: reworded subject and description] Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> Link: https://patch.msgid.link/35182ee1d972dfcd093a964e11205efcebbdc044.1757643388.git.unicorn_wang@outlook.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 49a6c160ad4812476f8ae1a8f4ed6d15adfa6c09 ]

cdns_pcie::ops might not be populated by all the Cadence glue drivers. This
is going to be true for the upcoming Sophgo platform which doesn't set the
ops.

Hence, add a check to prevent NULL pointer dereference.

Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
[mani: reworded subject and description]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/35182ee1d972dfcd093a964e11205efcebbdc044.1757643388.git.unicorn_wang@outlook.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
PCI: j721e: Fix programming sequence of "strap" settings 2025-10-29T13:01:24+00:00 Siddharth Vadapalli s-vadapalli@ti.com 2025-10-20T16:15:01+00:00 2b5832e9cde96a6635b4857500d5f1809fb5c242 [ Upstream commit f842d3313ba179d4005096357289c7ad09cec575 ] The Cadence PCIe Controller integrated in the TI K3 SoCs supports both Root-Complex and Endpoint modes of operation. The Glue Layer allows "strapping" the Mode of operation of the Controller, the Link Speed and the Link Width. This is enabled by programming the "PCIEn_CTRL" register (n corresponds to the PCIe instance) within the CTRL_MMR memory-mapped register space. The "reset-values" of the registers are also different depending on the mode of operation. Since the PCIe Controller latches onto the "reset-values" immediately after being powered on, if the Glue Layer configuration is not done while the PCIe Controller is off, it will result in the PCIe Controller latching onto the wrong "reset-values". In practice, this will show up as a wrong representation of the PCIe Controller's capability structures in the PCIe Configuration Space. Some such capabilities which are supported by the PCIe Controller in the Root-Complex mode but are incorrectly latched onto as being unsupported are: - Link Bandwidth Notification - Alternate Routing ID (ARI) Forwarding Support - Next capability offset within Advanced Error Reporting (AER) capability Fix this by powering off the PCIe Controller before programming the "strap" settings and powering it on after that. The runtime PM APIs namely pm_runtime_put_sync() and pm_runtime_get_sync() will decrement and increment the usage counter respectively, causing GENPD to power off and power on the PCIe Controller. Fixes: f3e25911a430 ("PCI: j721e: Add TI J721E PCIe driver") Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20250908120828.1471776-1-s-vadapalli@ti.com [ removed offset parameter from j721e_pcie_set_mode() and ACSPCIE refclk handling ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit f842d3313ba179d4005096357289c7ad09cec575 ]

The Cadence PCIe Controller integrated in the TI K3 SoCs supports both
Root-Complex and Endpoint modes of operation. The Glue Layer allows
"strapping" the Mode of operation of the Controller, the Link Speed
and the Link Width. This is enabled by programming the "PCIEn_CTRL"
register (n corresponds to the PCIe instance) within the CTRL_MMR
memory-mapped register space. The "reset-values" of the registers are
also different depending on the mode of operation.

Since the PCIe Controller latches onto the "reset-values" immediately
after being powered on, if the Glue Layer configuration is not done while
the PCIe Controller is off, it will result in the PCIe Controller latching
onto the wrong "reset-values". In practice, this will show up as a wrong
representation of the PCIe Controller's capability structures in the PCIe
Configuration Space. Some such capabilities which are supported by the PCIe
Controller in the Root-Complex mode but are incorrectly latched onto as
being unsupported are:
- Link Bandwidth Notification
- Alternate Routing ID (ARI) Forwarding Support
- Next capability offset within Advanced Error Reporting (AER) capability

Fix this by powering off the PCIe Controller before programming the "strap"
settings and powering it on after that. The runtime PM APIs namely
pm_runtime_put_sync() and pm_runtime_get_sync() will decrement and
increment the usage counter respectively, causing GENPD to power off and
power on the PCIe Controller.

Fixes: f3e25911a430 ("PCI: j721e: Add TI J721E PCIe driver")
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250908120828.1471776-1-s-vadapalli@ti.com
[ removed offset parameter from j721e_pcie_set_mode() and ACSPCIE refclk handling ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI: tegra194: Handle errors in BPMP response 2025-10-29T13:01:24+00:00 Vidya Sagar vidyas@nvidia.com 2025-10-20T16:22:37+00:00 2b8f50036dcd2764c9546ad660f8012c01fac436 [ Upstream commit f8c9ad46b00453a8c075453f3745f8d263f44834 ] The return value from tegra_bpmp_transfer() indicates the success or failure of the IPC transaction with BPMP. If the transaction succeeded, we also need to check the actual command's result code. If we don't have error handling for tegra_bpmp_transfer(), we will set the pcie->ep_state to EP_STATE_ENABLED even when the tegra_bpmp_transfer() command fails. Thus, the pcie->ep_state will get out of sync with reality, and any further PERST# assert + deassert will be a no-op and will not trigger the hardware initialization sequence. This is because pex_ep_event_pex_rst_deassert() checks the current pcie->ep_state, and does nothing if the current state is already EP_STATE_ENABLED. Thus, it is important to have error handling for tegra_bpmp_transfer(), such that the pcie->ep_state can not get out of sync with reality, so that we will try to initialize the hardware not only during the first PERST# assert + deassert, but also during any succeeding PERST# assert + deassert. One example where this fix is needed is when using a rock5b as host. During the initial PERST# assert + deassert (triggered by the bootloader on the rock5b) pex_ep_event_pex_rst_deassert() will get called, but for some unknown reason, the tegra_bpmp_transfer() call to initialize the PHY fails. Once Linux has been loaded on the rock5b, the PCIe driver will once again assert + deassert PERST#. However, without tegra_bpmp_transfer() error handling, this second PERST# assert + deassert will not trigger the hardware initialization sequence. With tegra_bpmp_transfer() error handling, the second PERST# assert + deassert will once again trigger the hardware to be initialized and this time the tegra_bpmp_transfer() succeeds. Fixes: c57247f940e8 ("PCI: tegra: Add support for PCIe endpoint mode in Tegra194") Signed-off-by: Vidya Sagar <vidyas@nvidia.com> [cassel: improve commit log] Signed-off-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20250922140822.519796-8-cassel@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit f8c9ad46b00453a8c075453f3745f8d263f44834 ]

The return value from tegra_bpmp_transfer() indicates the success or
failure of the IPC transaction with BPMP. If the transaction succeeded, we
also need to check the actual command's result code.

If we don't have error handling for tegra_bpmp_transfer(), we will set the
pcie->ep_state to EP_STATE_ENABLED even when the tegra_bpmp_transfer()
command fails. Thus, the pcie->ep_state will get out of sync with reality,
and any further PERST# assert + deassert will be a no-op and will not
trigger the hardware initialization sequence.

This is because pex_ep_event_pex_rst_deassert() checks the current
pcie->ep_state, and does nothing if the current state is already
EP_STATE_ENABLED.

Thus, it is important to have error handling for tegra_bpmp_transfer(),
such that the pcie->ep_state can not get out of sync with reality, so that
we will try to initialize the hardware not only during the first PERST#
assert + deassert, but also during any succeeding PERST# assert + deassert.

One example where this fix is needed is when using a rock5b as host.
During the initial PERST# assert + deassert (triggered by the bootloader on
the rock5b) pex_ep_event_pex_rst_deassert() will get called, but for some
unknown reason, the tegra_bpmp_transfer() call to initialize the PHY fails.
Once Linux has been loaded on the rock5b, the PCIe driver will once again
assert + deassert PERST#. However, without tegra_bpmp_transfer() error
handling, this second PERST# assert + deassert will not trigger the
hardware initialization sequence.

With tegra_bpmp_transfer() error handling, the second PERST# assert +
deassert will once again trigger the hardware to be initialized and this
time the tegra_bpmp_transfer() succeeds.

Fixes: c57247f940e8 ("PCI: tegra: Add support for PCIe endpoint mode in Tegra194")
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
[cassel: improve commit log]
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250922140822.519796-8-cassel@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI: tegra194: Fix broken tegra_pcie_ep_raise_msi_irq() 2025-10-29T13:01:13+00:00 Niklas Cassel cassel@kernel.org 2025-09-22T14:08:24+00:00 a6f28754efd87806de3d5070911c1c5255aa0cd1 commit b640d42a6ac9ba01abe65ec34f7c73aaf6758ab8 upstream. The pci_epc_raise_irq() supplies a MSI or MSI-X interrupt number in range (1-N), as per the pci_epc_raise_irq() kdoc, where N is 32 for MSI. But tegra_pcie_ep_raise_msi_irq() incorrectly uses the interrupt number as the MSI vector. This causes wrong MSI vector to be triggered, leading to the failure of PCI endpoint Kselftest MSI_TEST test case. To fix this issue, convert the interrupt number to MSI vector. Fixes: c57247f940e8 ("PCI: tegra: Add support for PCIe endpoint mode in Tegra194") Signed-off-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20250922140822.519796-6-cassel@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b640d42a6ac9ba01abe65ec34f7c73aaf6758ab8 upstream.

The pci_epc_raise_irq() supplies a MSI or MSI-X interrupt number in range
(1-N), as per the pci_epc_raise_irq() kdoc, where N is 32 for MSI.

But tegra_pcie_ep_raise_msi_irq() incorrectly uses the interrupt number as
the MSI vector. This causes wrong MSI vector to be triggered, leading to
the failure of PCI endpoint Kselftest MSI_TEST test case.

To fix this issue, convert the interrupt number to MSI vector.

Fixes: c57247f940e8 ("PCI: tegra: Add support for PCIe endpoint mode in Tegra194")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250922140822.519796-6-cassel@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI: keystone: Use devm_request_irq() to free "ks-pcie-error-irq" on exit 2025-10-29T13:01:13+00:00 Siddharth Vadapalli s-vadapalli@ti.com 2025-09-12T10:07:58+00:00 2abb0b282235e996b1f3888fa3840abbf8af4780 commit e51d05f523e43ce5d2bad957943a2b14f68078cd upstream. Commit under Fixes introduced the IRQ handler for "ks-pcie-error-irq". The interrupt is acquired using "request_irq()" but is never freed if the driver exits due to an error. Although the section in the driver that invokes "request_irq()" has moved around over time, the issue hasn't been addressed until now. Fix this by using "devm_request_irq()" which automatically frees the interrupt if the driver exits. Fixes: 025dd3daeda7 ("PCI: keystone: Add error IRQ handler") Reported-by: Jiri Slaby <jirislaby@kernel.org> Closes: https://lore.kernel.org/r/3d3a4b52-e343-42f3-9d69-94c259812143@kernel.org Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20250912100802.3136121-2-s-vadapalli@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit e51d05f523e43ce5d2bad957943a2b14f68078cd upstream.

Commit under Fixes introduced the IRQ handler for "ks-pcie-error-irq".
The interrupt is acquired using "request_irq()" but is never freed if
the driver exits due to an error. Although the section in the driver that
invokes "request_irq()" has moved around over time, the issue hasn't been
addressed until now.

Fix this by using "devm_request_irq()" which automatically frees the
interrupt if the driver exits.

Fixes: 025dd3daeda7 ("PCI: keystone: Add error IRQ handler")
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Closes: https://lore.kernel.org/r/3d3a4b52-e343-42f3-9d69-94c259812143@kernel.org
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250912100802.3136121-2-s-vadapalli@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI: tegra: Fix devm_kcalloc() argument order for port->phys allocation 2025-10-29T13:01:05+00:00 Alok Tiwari alok.a.tiwari@oracle.com 2025-08-19T15:04:08+00:00 6f5b86b3f7bc395cfecca25a1c009082efd8e9de [ Upstream commit e1a8805e5d263453ad76a4f50ab3b1c18ea07560 ] Fix incorrect argument order in devm_kcalloc() when allocating port->phys. The original call used sizeof(phy) as the number of elements and port->lanes as the element size, which is reversed. While this happens to produce the correct total allocation size with current pointer size and lane counts, the argument order is wrong. Fixes: 6fe7c187e026 ("PCI: tegra: Support per-lane PHYs") Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com> [mani: added Fixes tag] Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://patch.msgid.link/20250819150436.3105973-1-alok.a.tiwari@oracle.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit e1a8805e5d263453ad76a4f50ab3b1c18ea07560 ]

Fix incorrect argument order in devm_kcalloc() when allocating port->phys.
The original call used sizeof(phy) as the number of elements and
port->lanes as the element size, which is reversed.  While this happens to
produce the correct total allocation size with current pointer size and
lane counts, the argument order is wrong.

Fixes: 6fe7c187e026 ("PCI: tegra: Support per-lane PHYs")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
[mani: added Fixes tag]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250819150436.3105973-1-alok.a.tiwari@oracle.com
Signed-off-by: Sasha Levin <sashal@kernel.org>