linux-stable.git/drivers/pci/controller, branch linux-5.0.y Linux kernel stable tree PCI: rcar: Add the initialization of PCIe link in resume_noirq() 2019-05-25T16:22:17+00:00 Kazufumi Ikeda kaz-ikeda@xc.jp.nec.com 2019-03-25T19:43:19+00:00 4f22ec9f0c285e4df37cecfd30b000cc5bf5ffda commit be20bbcb0a8cb5597cc62b3e28d275919f3431df upstream. Reestablish the PCIe link very early in the resume process in case it went down to prevent PCI accesses from hanging the bus. Such accesses can happen early in the PCI resume process, as early as the SUSPEND_RESUME_NOIRQ step, thus the link must be reestablished in the driver resume_noirq() callback. Fixes: e015f88c368d ("PCI: rcar: Add support for R-Car H3 to pcie-rcar") Signed-off-by: Kazufumi Ikeda <kaz-ikeda@xc.jp.nec.com> Signed-off-by: Gaku Inami <gaku.inami.xw@bp.renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> [lorenzo.pieralisi@arm.com: reformatted commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Cc: stable@vger.kernel.org Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Phil Edworthy <phil.edworthy@renesas.com> Cc: Simon Horman <horms+renesas@verge.net.au> Cc: Wolfram Sang <wsa@the-dreams.de> Cc: linux-renesas-soc@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit be20bbcb0a8cb5597cc62b3e28d275919f3431df upstream.

Reestablish the PCIe link very early in the resume process in case it
went down to prevent PCI accesses from hanging the bus. Such accesses
can happen early in the PCI resume process, as early as the
SUSPEND_RESUME_NOIRQ step, thus the link must be reestablished in the
driver resume_noirq() callback.

Fixes: e015f88c368d ("PCI: rcar: Add support for R-Car H3 to pcie-rcar")
Signed-off-by: Kazufumi Ikeda <kaz-ikeda@xc.jp.nec.com>
Signed-off-by: Gaku Inami <gaku.inami.xw@bp.renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
[lorenzo.pieralisi@arm.com: reformatted commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: stable@vger.kernel.org
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Phil Edworthy <phil.edworthy@renesas.com>
Cc: Simon Horman <horms+renesas@verge.net.au>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: linux-renesas-soc@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI: hv: Add pci_destroy_slot() in pci_devices_present_work(), if necessary 2019-05-16T17:40:30+00:00 Dexuan Cui decui@microsoft.com 2019-03-04T21:34:49+00:00 78b8c59eee72b4e854b8f1e58eae308f750f843c commit 340d455699400f2c2c0f9b3f703ade3085cdb501 upstream. When we hot-remove a device, usually the host sends us a PCI_EJECT message, and a PCI_BUS_RELATIONS message with bus_rel->device_count == 0. When we execute the quick hot-add/hot-remove test, the host may not send us the PCI_EJECT message if the guest has not fully finished the initialization by sending the PCI_RESOURCES_ASSIGNED* message to the host, so it's potentially unsafe to only depend on the pci_destroy_slot() in hv_eject_device_work() because the code path create_root_hv_pci_bus() -> hv_pci_assign_slots() is not called in this case. Note: in this case, the host still sends the guest a PCI_BUS_RELATIONS message with bus_rel->device_count == 0. In the quick hot-add/hot-remove test, we can have such a race before the code path pci_devices_present_work() -> new_pcichild_device() adds the new device into the hbus->children list, we may have already received the PCI_EJECT message, and since the tasklet handler hv_pci_onchannelcallback() may fail to find the "hpdev" by calling get_pcichild_wslot(hbus, dev_message->wslot.slot) hv_pci_eject_device() is not called; Later, by continuing execution create_root_hv_pci_bus() -> hv_pci_assign_slots() creates the slot and the PCI_BUS_RELATIONS message with bus_rel->device_count == 0 removes the device from hbus->children, and we end up being unable to remove the slot in hv_pci_remove() -> hv_pci_remove_slots() Remove the slot in pci_devices_present_work() when the device is removed to address this race. pci_devices_present_work() and hv_eject_device_work() run in the singled-threaded hbus->wq, so there is not a double-remove issue for the slot. We cannot offload hv_pci_eject_device() from hv_pci_onchannelcallback() to the workqueue, because we need the hv_pci_onchannelcallback() synchronously call hv_pci_eject_device() to poll the channel ringbuffer to work around the "hangs in hv_compose_msi_msg()" issue fixed in commit de0aa7b2f97d ("PCI: hv: Fix 2 hang issues in hv_compose_msi_msg()") Fixes: a15f2c08c708 ("PCI: hv: support reporting serial number as slot information") Signed-off-by: Dexuan Cui <decui@microsoft.com> [lorenzo.pieralisi@arm.com: rewritten commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 340d455699400f2c2c0f9b3f703ade3085cdb501 upstream.

When we hot-remove a device, usually the host sends us a PCI_EJECT message,
and a PCI_BUS_RELATIONS message with bus_rel->device_count == 0.

When we execute the quick hot-add/hot-remove test, the host may not send
us the PCI_EJECT message if the guest has not fully finished the
initialization by sending the PCI_RESOURCES_ASSIGNED* message to the
host, so it's potentially unsafe to only depend on the
pci_destroy_slot() in hv_eject_device_work() because the code path

create_root_hv_pci_bus()
 -> hv_pci_assign_slots()

is not called in this case. Note: in this case, the host still sends the
guest a PCI_BUS_RELATIONS message with bus_rel->device_count == 0.

In the quick hot-add/hot-remove test, we can have such a race before
the code path

pci_devices_present_work()
 -> new_pcichild_device()

adds the new device into the hbus->children list, we may have already
received the PCI_EJECT message, and since the tasklet handler

hv_pci_onchannelcallback()

may fail to find the "hpdev" by calling

get_pcichild_wslot(hbus, dev_message->wslot.slot)

hv_pci_eject_device() is not called; Later, by continuing execution

create_root_hv_pci_bus()
 -> hv_pci_assign_slots()

creates the slot and the PCI_BUS_RELATIONS message with
bus_rel->device_count == 0 removes the device from hbus->children, and
we end up being unable to remove the slot in

hv_pci_remove()
 -> hv_pci_remove_slots()

Remove the slot in pci_devices_present_work() when the device
is removed to address this race.

pci_devices_present_work() and hv_eject_device_work() run in the
singled-threaded hbus->wq, so there is not a double-remove issue for the
slot.

We cannot offload hv_pci_eject_device() from hv_pci_onchannelcallback()
to the workqueue, because we need the hv_pci_onchannelcallback()
synchronously call hv_pci_eject_device() to poll the channel
ringbuffer to work around the "hangs in hv_compose_msi_msg()" issue
fixed in commit de0aa7b2f97d ("PCI: hv: Fix 2 hang issues in
hv_compose_msi_msg()")

Fixes: a15f2c08c708 ("PCI: hv: support reporting serial number as slot information")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
[lorenzo.pieralisi@arm.com: rewritten commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by:  Michael Kelley <mikelley@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI: hv: Add hv_pci_remove_slots() when we unload the driver 2019-05-16T17:40:30+00:00 Dexuan Cui decui@microsoft.com 2019-03-04T21:34:48+00:00 f20f463b32bc09c2ef793765326798e5b0df2361 commit 15becc2b56c6eda3d9bf5ae993bafd5661c1fad1 upstream. When we unload the pci-hyperv host controller driver, the host does not send us a PCI_EJECT message. In this case we also need to make sure the sysfs PCI slot directory is removed, otherwise a command on a slot file eg: "cat /sys/bus/pci/slots/2/address" will trigger a "BUG: unable to handle kernel paging request" and, if we unload/reload the driver several times we would end up with stale slot entries in PCI slot directories in /sys/bus/pci/slots/ root@localhost:~# ls -rtl /sys/bus/pci/slots/ total 0 drwxr-xr-x 2 root root 0 Feb 7 10:49 2 drwxr-xr-x 2 root root 0 Feb 7 10:49 2-1 drwxr-xr-x 2 root root 0 Feb 7 10:51 2-2 Add the missing code to remove the PCI slot and fix the current behaviour. Fixes: a15f2c08c708 ("PCI: hv: support reporting serial number as slot information") Signed-off-by: Dexuan Cui <decui@microsoft.com> [lorenzo.pieralisi@arm.com: reformatted the log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Stephen Hemminger <sthemmin@microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 15becc2b56c6eda3d9bf5ae993bafd5661c1fad1 upstream.

When we unload the pci-hyperv host controller driver, the host does not
send us a PCI_EJECT message.

In this case we also need to make sure the sysfs PCI slot directory is
removed, otherwise a command on a slot file eg:

"cat /sys/bus/pci/slots/2/address"

will trigger a

"BUG: unable to handle kernel paging request"

and, if we unload/reload the driver several times we would end up with
stale slot entries in PCI slot directories in /sys/bus/pci/slots/

root@localhost:~# ls -rtl  /sys/bus/pci/slots/
total 0
drwxr-xr-x 2 root root 0 Feb  7 10:49 2
drwxr-xr-x 2 root root 0 Feb  7 10:49 2-1
drwxr-xr-x 2 root root 0 Feb  7 10:51 2-2

Add the missing code to remove the PCI slot and fix the current
behaviour.

Fixes: a15f2c08c708 ("PCI: hv: support reporting serial number as slot information")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
[lorenzo.pieralisi@arm.com: reformatted the log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Stephen Hemminger <sthemmin@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI: hv: Fix a memory leak in hv_eject_device_work() 2019-05-16T17:40:30+00:00 Dexuan Cui decui@microsoft.com 2019-03-04T21:34:48+00:00 d3a9cd23b172d1a873c05fb9d904538e58090f8b commit 05f151a73ec2b23ffbff706e5203e729a995cdc2 upstream. When a device is created in new_pcichild_device(), hpdev->refs is set to 2 (i.e. the initial value of 1 plus the get_pcichild()). When we hot remove the device from the host, in a Linux VM we first call hv_pci_eject_device(), which increases hpdev->refs by get_pcichild() and then schedules a work of hv_eject_device_work(), so hpdev->refs becomes 3 (let's ignore the paired get/put_pcichild() in other places). But in hv_eject_device_work(), currently we only call put_pcichild() twice, meaning the 'hpdev' struct can't be freed in put_pcichild(). Add one put_pcichild() to fix the memory leak. The device can also be removed when we run "rmmod pci-hyperv". On this path (hv_pci_remove() -> hv_pci_bus_exit() -> hv_pci_devices_present()), hpdev->refs is 2, and we do correctly call put_pcichild() twice in pci_devices_present_work(). Fixes: 4daace0d8ce8 ("PCI: hv: Add paravirtual PCI front-end for Microsoft Hyper-V VMs") Signed-off-by: Dexuan Cui <decui@microsoft.com> [lorenzo.pieralisi@arm.com: commit log rework] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 05f151a73ec2b23ffbff706e5203e729a995cdc2 upstream.

When a device is created in new_pcichild_device(), hpdev->refs is set
to 2 (i.e. the initial value of 1 plus the get_pcichild()).

When we hot remove the device from the host, in a Linux VM we first call
hv_pci_eject_device(), which increases hpdev->refs by get_pcichild() and
then schedules a work of hv_eject_device_work(), so hpdev->refs becomes
3 (let's ignore the paired get/put_pcichild() in other places). But in
hv_eject_device_work(), currently we only call put_pcichild() twice,
meaning the 'hpdev' struct can't be freed in put_pcichild().

Add one put_pcichild() to fix the memory leak.

The device can also be removed when we run "rmmod pci-hyperv". On this
path (hv_pci_remove() -> hv_pci_bus_exit() -> hv_pci_devices_present()),
hpdev->refs is 2, and we do correctly call put_pcichild() twice in
pci_devices_present_work().

Fixes: 4daace0d8ce8 ("PCI: hv: Add paravirtual PCI front-end for Microsoft Hyper-V VMs")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
[lorenzo.pieralisi@arm.com: commit log rework]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by:  Michael Kelley <mikelley@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI: mediatek: Fix memory mapped IO range size computation 2019-04-05T20:34:25+00:00 Honghui Zhang honghui.zhang@mediatek.com 2019-02-01T05:36:06+00:00 8a0f1351bac10979dabaca300df736346046574e [ Upstream commit c61df57343bf05743f8abbb31eec9a6f05820dd1 ] Mediatek's HW assigns a MMIO address range (typically starts from 0x20000000 to 0x2fffffff for both mt2712 and mt7622) for PCI usage. This MMIO address space represents the address space that can be allocated to PCI devices through Base Address Registers. Even though the full MMIO address range is available to be allocated, it should be enabled by the PCIE_AHB_TRANS_BASE register in the host controller and the size that is enabled is determined by AHB2PCIE_SIZE bits in this register. Owing to a bug in the MMIO window size computation, current code does not enable the full size of the available MMIO address range in the PCI host controller; if the PCI devices BARs requested size exceeds the size enabled through the PCIE_AHB_TRANS_BASE register the requests targeting the disabled address address space will be blocked by the root complex causing a system error. Existing code has never run into a system error in production because even half of the enabled MMIO range (128MB) is big enough for typical devices BAR requests (4MB) but the full MMIO address range should be enabled regardless. Fix the MMIO window size computation by using resource_size(mem) instead of mem->end - mem->start. Since the MMIO window size for both MT2712 and MT7622 is 0x10000000, this change will update the parameter passed to fls() from 0xfffffff to 0x10000000 and calculate the whole memory mapped IO range size correctly. Detected through coccinelle semantic patch (and related warning): scripts/coccinelle/api/resource_size.cocci: pcie-mediatek.c:720:13-16: WARNING: Suspicious code. resource_size is maybe missing with mem Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com> [lorenzo.pieralisi@arm.com: rewrote the commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit c61df57343bf05743f8abbb31eec9a6f05820dd1 ]

Mediatek's HW assigns a MMIO address range (typically starts from
0x20000000 to 0x2fffffff for both mt2712 and mt7622) for PCI usage.

This MMIO address space represents the address space that can
be allocated to PCI devices through Base Address Registers.

Even though the full MMIO address range is available to be allocated, it
should be enabled by the PCIE_AHB_TRANS_BASE register in the host
controller and the size that is enabled is determined by AHB2PCIE_SIZE
bits in this register.

Owing to a bug in the MMIO window size computation, current code does
not enable the full size of the available MMIO address range in the
PCI host controller; if the PCI devices BARs requested size exceeds the
size enabled through the PCIE_AHB_TRANS_BASE register the requests
targeting the disabled address address space will be blocked by the root
complex causing a system error.

Existing code has never run into a system error in production because
even half of the enabled MMIO range (128MB) is big enough for typical
devices BAR requests (4MB) but the full MMIO address range should
be enabled regardless.

Fix the MMIO window size computation by using resource_size(mem) instead
of mem->end - mem->start.

Since the MMIO window size for both MT2712 and MT7622 is 0x10000000,
this change will update the parameter passed to fls() from 0xfffffff to
0x10000000 and calculate the whole memory mapped IO range size
correctly.

Detected through coccinelle semantic patch (and related warning):

scripts/coccinelle/api/resource_size.cocci:

pcie-mediatek.c:720:13-16: WARNING: Suspicious code. resource_size is maybe missing with mem

Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com>
[lorenzo.pieralisi@arm.com: rewrote the commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
PCI: pci-bridge-emul: Extend pci_bridge_emul_init() with flags 2019-03-23T19:11:27+00:00 Thomas Petazzoni thomas.petazzoni@bootlin.com 2019-02-20T09:48:41+00:00 2b9ef0bedaac2acc648a03bb519e4609661da6dc commit 33776d059630e5045ea9ccf756c74de8f9cc86de upstream. Depending on the capabilities of the PCI controller/platform, the PCI-to-PCI bridge emulation behavior might need to be different. For example, on platforms that use the pci-mvebu code, we currently don't support prefetchable memory BARs, so the corresponding fields in the PCI-to-PCI bridge configuration space should be read-only. To implement this, extend pci_bridge_emul_init() to take a "flags" argument, with currently one flag supported: PCI_BRIDGE_EMUL_NO_PREFETCHABLE_BAR that will make the prefetchable memory base and limit registers read-only. The pci-mvebu and pci-aardvark drivers are updated accordingly. Fixes: 1f08673eef123 ("PCI: mvebu: Convert to PCI emulated bridge config space") Reported-by: Luís Mendes <luis.p.mendes@gmail.com> Reported-by: Leigh Brown <leigh@solinno.co.uk> Tested-by: Leigh Brown <leigh@solinno.co.uk> Tested-by: Luis Mendes <luis.p.mendes@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org Cc: Luís Mendes <luis.p.mendes@gmail.com> Cc: Leigh Brown <leigh@solinno.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 33776d059630e5045ea9ccf756c74de8f9cc86de upstream.

Depending on the capabilities of the PCI controller/platform, the
PCI-to-PCI bridge emulation behavior might need to be different. For
example, on platforms that use the pci-mvebu code, we currently don't
support prefetchable memory BARs, so the corresponding fields in the
PCI-to-PCI bridge configuration space should be read-only.

To implement this, extend pci_bridge_emul_init() to take a "flags"
argument, with currently one flag supported:

PCI_BRIDGE_EMUL_NO_PREFETCHABLE_BAR

that will make the prefetchable memory base and limit registers
read-only.

The pci-mvebu and pci-aardvark drivers are updated accordingly.

Fixes: 1f08673eef123 ("PCI: mvebu: Convert to PCI emulated bridge config space")
Reported-by: Luís Mendes <luis.p.mendes@gmail.com>
Reported-by: Leigh Brown <leigh@solinno.co.uk>
Tested-by: Leigh Brown <leigh@solinno.co.uk>
Tested-by: Luis Mendes <luis.p.mendes@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: stable@vger.kernel.org
Cc: Luís Mendes <luis.p.mendes@gmail.com>
Cc: Leigh Brown <leigh@solinno.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI: dwc: skip MSI init if MSIs have been explicitly disabled 2019-03-23T19:11:27+00:00 Lucas Stach l.stach@pengutronix.de 2019-02-27T16:52:19+00:00 0d5bc50f524afb84a882cb5f507c4aeeab08aa8a commit 3afc8299f39a27b60e1519a28e18878ce878e7dd upstream. Since 7c5925afbc58 (PCI: dwc: Move MSI IRQs allocation to IRQ domains hierarchical API) the MSI init claims one of the controller IRQs as a chained IRQ line for the MSI controller. On some designs, like the i.MX6, this line is shared with a PCIe legacy IRQ. When the line is claimed for the MSI domain, any device trying to use this legacy IRQs will fail to request this IRQ line. As MSI and legacy IRQs are already mutually exclusive on the DWC core, as the core won't forward any legacy IRQs once any MSI has been enabled, users wishing to use legacy IRQs already need to explictly disable MSI support (usually via the pci=nomsi kernel commandline option). To avoid any issues with MSI conflicting with legacy IRQs, just skip all of the DWC MSI initalization, including the IRQ line claim, when MSI is disabled. Fixes: 7c5925afbc58 ("PCI: dwc: Move MSI IRQs allocation to IRQ domains hierarchical API") Tested-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 3afc8299f39a27b60e1519a28e18878ce878e7dd upstream.

Since 7c5925afbc58 (PCI: dwc: Move MSI IRQs allocation to IRQ domains
hierarchical API) the MSI init claims one of the controller IRQs as a
chained IRQ line for the MSI controller. On some designs, like the i.MX6,
this line is shared with a PCIe legacy IRQ. When the line is claimed for
the MSI domain, any device trying to use this legacy IRQs will fail to
request this IRQ line.

As MSI and legacy IRQs are already mutually exclusive on the DWC core,
as the core won't forward any legacy IRQs once any MSI has been enabled,
users wishing to use legacy IRQs already need to explictly disable MSI
support (usually via the pci=nomsi kernel commandline option). To avoid
any issues with MSI conflicting with legacy IRQs, just skip all of the
DWC MSI initalization, including the IRQ line claim, when MSI is disabled.

Fixes: 7c5925afbc58 ("PCI: dwc: Move MSI IRQs allocation to IRQ domains hierarchical API")
Tested-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI: qcom: Don't deassert reset GPIO during probe 2019-03-23T19:11:27+00:00 Bjorn Andersson bjorn.andersson@linaro.org 2019-01-25T23:26:16+00:00 63a9e7ce6624ef0385a1c65bdae0708d3abb7f47 commit 02b485e31d98265189b91f3e69c43df2ed50610c upstream. Acquiring the reset GPIO low means that reset is being deasserted, this is followed almost immediately with qcom_pcie_host_init() asserting it, initializing it and then finally deasserting it again, for the link to come up. Some PCIe devices requires a minimum time between the initial deassert and subsequent reset cycles. In a platform that boots with the reset GPIO asserted this requirement is being violated by this deassert/assert pulse. Acquire the reset GPIO high to prevent this situation by matching the state to the subsequent asserted state. Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver") Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 02b485e31d98265189b91f3e69c43df2ed50610c upstream.

Acquiring the reset GPIO low means that reset is being deasserted, this
is followed almost immediately with qcom_pcie_host_init() asserting it,
initializing it and then finally deasserting it again, for the link to
come up.

Some PCIe devices requires a minimum time between the initial deassert
and subsequent reset cycles. In a platform that boots with the reset
GPIO asserted this requirement is being violated by this deassert/assert
pulse.

Acquire the reset GPIO high to prevent this situation by matching the
state to the subsequent asserted state.

Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
[lorenzo.pieralisi@arm.com: updated commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge tag 'pci-v5.0-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci 2019-02-01T07:06:17+00:00 Linus Torvalds torvalds@linux-foundation.org 2019-02-01T07:06:17+00:00 44e56f325b7d63e8a53008956ce7b28e4272a599 Pull PCI fixes from Bjorn Helgaas: - Revert armada8k GPIO reset change that broke Macchiatobin booting (Baruch Siach) - Use actual size config reads on ARM cns3xxx (Koen Vandeputte) - Fix ARM cns3xxx config write alignment issue (Koen Vandeputte) - Fix imx6 PHY device link error checking (Leonard Crestez) - Fix imx6 probe failure on chips without separate PCI power domain (Leonard Crestez) * tag 'pci-v5.0-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: Revert "PCI: armada8k: Add support for gpio controlled reset signal" ARM: cns3xxx: Use actual size reads for PCIe ARM: cns3xxx: Fix writing to wrong PCI config registers after alignment PCI: imx: Fix checking pd_pcie_phy device link addition PCI: imx: Fix probe failure without power domain 
Pull PCI fixes from Bjorn Helgaas:

 - Revert armada8k GPIO reset change that broke Macchiatobin booting
   (Baruch Siach)

 - Use actual size config reads on ARM cns3xxx (Koen Vandeputte)

 - Fix ARM cns3xxx config write alignment issue (Koen Vandeputte)

 - Fix imx6 PHY device link error checking (Leonard Crestez)

 - Fix imx6 probe failure on chips without separate PCI power domain
   (Leonard Crestez)

* tag 'pci-v5.0-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  Revert "PCI: armada8k: Add support for gpio controlled reset signal"
  ARM: cns3xxx: Use actual size reads for PCIe
  ARM: cns3xxx: Fix writing to wrong PCI config registers after alignment
  PCI: imx: Fix checking pd_pcie_phy device link addition
  PCI: imx: Fix probe failure without power domain
Revert "PCI: armada8k: Add support for gpio controlled reset signal" 2019-01-31T21:07:29+00:00 Baruch Siach baruch@tkos.co.il 2019-01-31T21:00:18+00:00 f14bcc0add3abecceca1a3fe538c4ec9566893f3 Revert commit 3d71746c42 ("PCI: armada8k: Add support for gpio controlled reset signal"). That commit breaks boot on Macchiatobin board when a Mellanox NIC is present in the PCIe slot. It turns out that full reset cycle requires first comphy serdes initialization. Reset signal toggle without comphy initialization makes access to PCI configuration registers stall indefinitely. U-Boot toggles the Macchiatobin PCIe reset line already at boot, after initializing the comphy serdes. So while commit 3d71746c42 ("PCI: armada8k: Add support for gpio controlled reset signal") enables PCIe on platforms that U-Boot does not touch the reset line (like Clearfog GT-8K), it breaks PCIe (and boot) on the Macchiatobin board. Revert commit 3d71746c42 ("PCI: armada8k: Add support for gpio controlled reset signal") entirely to fix the Macchiatobin regression. Reported-by: Sven Auhagen <sven.auhagen@voleatech.de> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> 
Revert commit 3d71746c42 ("PCI: armada8k: Add support for gpio controlled
reset signal").

That commit breaks boot on Macchiatobin board when a Mellanox NIC is
present in the PCIe slot.

It turns out that full reset cycle requires first comphy serdes
initialization. Reset signal toggle without comphy initialization makes
access to PCI configuration registers stall indefinitely. U-Boot toggles
the Macchiatobin PCIe reset line already at boot, after initializing the
comphy serdes.

So while commit 3d71746c42 ("PCI: armada8k: Add support for gpio controlled
reset signal") enables PCIe on platforms that U-Boot does not touch the
reset line (like Clearfog GT-8K), it breaks PCIe (and boot) on the
Macchiatobin board.

Revert commit 3d71746c42 ("PCI: armada8k: Add support for gpio controlled
reset signal") entirely to fix the Macchiatobin regression.

Reported-by: Sven Auhagen <sven.auhagen@voleatech.de>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>