Pull NTB updates from Jon Mason: "Non-Transparent Bridge updates. Fix of heap data and clang warnings, support for a new Intel NTB device, and NTB EndPoint Function (EPF) support and the various fixes for that" * tag 'ntb-5.20' of https://github.com/jonmason/ntb: MAINTAINERS: add PCI Endpoint NTB drivers to NTB files NTB: EPF: Tidy up some bounds checks NTB: EPF: Fix error code in epf_ntb_bind() PCI: endpoint: pci-epf-vntb: reduce several globals to statics PCI: endpoint: pci-epf-vntb: fix error handle in epf_ntb_mw_bar_init() PCI: endpoint: Fix Kconfig dependency NTB: EPF: set pointer addr to null using NULL rather than 0 Documentation: PCI: extend subheading underline for "lspci output" section Documentation: PCI: Use code-block block for scratchpad registers diagram Documentation: PCI: Add specification for the PCI vNTB function device PCI: endpoint: Support NTB transfer between RC and EP NTB: epf: Allow more flexibility in the memory BAR map method PCI: designware-ep: Allow pci_epc_set_bar() update inbound map address ntb: intel: add GNR support for Intel PCIe gen5 NTB NTB: ntb_tool: uninitialized heap data in tool_fn_write() ntb: idt: fix clang -Wformat warnings
ntb_mw_set_trans() will set memory map window after endpoint function driver bind. The inbound map address need be updated dynamically when using NTB by PCIe Root Port and PCIe Endpoint connection. Checking if iatu already assigned to the BAR, if yes, using assigned iatu number to update inbound address map and skip set BAR's register. Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
- Drop of_match_ptr() to avoid unused variables when CONFIG_OF is unset (Bjorn Helgaas) - Fix ARM pci_remap_iospace() when CONFIG_MMU unset to avoid build errors (Pali Rohár) * pci/misc: PCI/ACPI: Update link to PCI firmware specification PCI: Drop of_match_ptr() to avoid unused variables
- Convert to new *_PM_OPS macros to avoid need for "#ifdef CONFIG_PM_SLEEP" or "__maybe_unused" (Bjorn Helgaas) * pci/ctrl/pm-ops: PCI: Convert to new *_PM_OPS macros
- Fix tegra_pcie_config_ep() power management in error path (Miaoqian Lin) - Convert DT binding to json-schema (Vidya Sagar) - Add DT bindings and driver support for Tegra234 Root Port and Endpoint mode (Vidya Sagar) - Disable MSI for Tegra234 Root Ports so they use INTx for all events (PCIe doesn't allow mixing INTx and MSI/MSI-X) (Vidya Sagar) - Search for Vendor-Specific RAS-DEC capability instead of hard-coding offset (Vidya Sagar) - Fix unintentional APPL_INTR_STATUS_L0 value overwrite in Root Port interrupt handling (Vidya Sagar) - Clear Bandwidth Management interrupt status bit to avoid interrupt storm (Vidya Sagar) - Set default Max Payload Size to 256 bytes (Vidya Sagar) - Fix offset when clearing bit in Data Link Feature capability (Vidya Sagar) - Extend Endpoint mode support to devices beyond Controller-5 (Vidya Sagar) * pci/ctrl/tegra194: PCI: tegra194: Add Tegra234 PCIe support PCI: tegra194: Extend Endpoint mode support PCI: tegra194: Fix link up retry sequence PCI: tegra194: Clean up the exit path for Endpoint mode PCI: tegra194: Enable support for 256 Byte payload PCI: tegra194: Clear bandwidth management status PCI: tegra194: Fix Root Port interrupt handling PCI: tegra194: Find RAS DES PCIe capability offset Revert "PCI: tegra194: Rename tegra_pcie_dw to tegra194_pcie" PCI: Disable MSI for Tegra234 Root Ports dt-bindings: PCI: tegra234: Add schema for tegra234 Endpoint mode dt-bindings: PCI: tegra234: Add schema for tegra234 Root Port mode dt-bindings: PCI: tegra194: Convert to json-schema PCI: tegra194: Fix PM error handling in tegra_pcie_config_ep() # Conflicts: # drivers/pci/controller/dwc/pcie-designware.h # drivers/pci/controller/dwc/pcie-tegra194.c
- Add PHY clock source implementation (Dmitry Baryshkov) - Use new clk_regmap_phy_mux_ops for gcc-sm8450 and gcc-sc7280 PCIe pipe clocks (Dmitry Baryshkov) - Set up rev 2.1.0 PARF_PHY before enabling clocks (Christian Marangi) - Power on PHY before accessing IPQ8074 DBI registers to avoid boot hangs (Robert Marko) - Power on PHY before accessing DBI registers on all variants for consistency (Robert Marko) - Remove unnecessary pipe_clk handling since this is done in PHY drivers (Dmitry Baryshkov) - Drop manual pipe_clk_src handling (Dmitry Baryshkov) - Move GEN3_RELATED DBI definitions to common dwc header (Baruch Siach) - Define slot capabilities using generic PCI_EXP_SLTCAP_* macros (Baruch Siach) - Add IPQ60xx support (Selvam Sathappan Periakaruppan) - Fix DT description typo (Baruch Siach) - Fix DT "compatibles" typo (Johan Hovold) - Allow ASPM L1 and substates for 2.7.0 (Krishna chaitanya chundru) * pci/ctrl/qcom: PCI: qcom: Allow ASPM L1 and substates for 2.7.0 dt-bindings: PCI: qcom: Fix reset conditional dt-bindings: PCI: qcom: Fix description typo PCI: qcom: Add IPQ60xx support PCI: qcom: Define slot capabilities using PCI_EXP_SLTCAP_* PCI: dwc: Move GEN3_RELATED DBI definitions to common header PCI: qcom: Drop manual pipe_clk_src handling PCI: qcom: Remove unnecessary pipe_clk handling PCI: qcom: Power on PHY before DBI register accesses PCI: qcom: Power on PHY before IPQ8074 DBI register accesses PCI: qcom: Set up rev 2.1.0 PARF_PHY before enabling clocks clk: qcom: gcc-sc7280: use new clk_regmap_phy_mux_ops for PCIe pipe clocks clk: qcom: gcc-sm8450: use new clk_regmap_phy_mux_ops for PCIe pipe clocks clk: qcom: regmap: add PHY clock source implementation
- Factor out ref clock disables to match enables (Bjorn Helgaas) - Collect clock enables in imx6_pcie_clk_enable() (Richard Zhu) - Propagate regulator and clock errors back to .host_init() caller (Richard Zhu) - Disable i.MX6QDL clock when disabling ref clocks (Richard Zhu) - Call host init function directly in resume instead of duplicating the code (Richard Zhu) - Turn off regulators when suspending (Richard Zhu) - Make link being down a non-fatal error so probe doesn't fail (Richard Zhu) - Start link in resume only if it was up before suspend to reduce resume time (Richard Zhu) - Move PHY init and power-on out of clock- and reset-related functions (Richard Zhu) - Rework suspend callback to be more symmetric with resume (Richard Zhu) - Set PCIE_DBI_RO_WR_EN before writing DBI registers (Richard Zhu) - Allow speeds faster than Gen2 (Richard Zhu) * pci/ctrl/imx6: PCI: imx6: Support more than Gen2 speed link mode PCI: imx6: Set PCIE_DBI_RO_WR_EN before writing DBI registers PCI: imx6: Reformat suspend callback to keep symmetric with resume PCI: imx6: Move the imx6_pcie_ltssm_disable() earlier PCI: imx6: Disable clocks in reverse order of enable PCI: imx6: Do not hide PHY driver callbacks and refine the error handling PCI: imx6: Reduce resume time by only starting link if it was up before suspend PCI: imx6: Mark the link down as non-fatal error PCI: imx6: Move regulator enable out of imx6_pcie_deassert_core_reset() PCI: imx6: Turn off regulator when system is in suspend mode PCI: imx6: Call host init function directly in resume PCI: imx6: Disable i.MX6QDL clock when disabling ref clocks PCI: imx6: Propagate .host_init() errors to caller PCI: imx6: Collect clock enables in imx6_pcie_clk_enable() PCI: imx6: Factor out ref clock disable to match enable PCI: imx6: Move imx6_pcie_clk_disable() earlier PCI: imx6: Move imx6_pcie_enable_ref_clk() earlier PCI: imx6: Move PHY management functions together PCI: imx6: Move imx6_pcie_grp_offset(), imx6_pcie_configure_type() earlier PCI: imx6: Convert to NOIRQ_SYSTEM_SLEEP_PM_OPS()
- Remove unnecessary include files (Bjorn Helgaas) * pci/ctrl/fu740: PCI: fu740: Remove unnecessary include files
Support more than Gen2 speed link mode, since i.MX8MP PCIe supports up to Gen3 link speed. Link: https://lore.kernel.org/r/1658287576-26908-1-git-send-email-hongxing.zhu@nxp.com Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The PCIE_DBI_RO_WR_EN bit should be set when write some DBI registers. To make sure that the DBI registers are writable, set the PCIE_DBI_RO_WR_EN properly when writing the DBI registers. Link: https://lore.kernel.org/r/1652866528-13220-1-git-send-email-hongxing.zhu@nxp.com Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>