linux-stable.git/drivers/pci/controller/dwc, branch linux-6.11.y Linux kernel stable tree PCI: tegra194: Move controller cleanups to pex_ep_event_pex_rst_deassert() 2024-12-05T12:53:49+00:00 Manivannan Sadhasivam manivannan.sadhasivam@linaro.org 2024-08-17T05:39:04+00:00 70212c2300971506e986d95000d2745529cac9d7 [ Upstream commit 40e2125381dc11379112485e3eefdd25c6df5375 ] Currently, the endpoint cleanup function dw_pcie_ep_cleanup() and EPF deinit notify function pci_epc_deinit_notify() are called during the execution of pex_ep_event_pex_rst_assert() i.e., when the host has asserted PERST#. But quickly after this step, refclk will also be disabled by the host. All of the tegra194 endpoint SoCs supported as of now depend on the refclk from the host for keeping the controller operational. Due to this limitation, any access to the hardware registers in the absence of refclk will result in a whole endpoint crash. Unfortunately, most of the controller cleanups require accessing the hardware registers (like eDMA cleanup performed in dw_pcie_ep_cleanup(), etc...). So these cleanup functions can cause the crash in the endpoint SoC once host asserts PERST#. One way to address this issue is by generating the refclk in the endpoint itself and not depending on the host. But that is not always possible as some of the endpoint designs do require the endpoint to consume refclk from the host. Thus, fix this crash by moving the controller cleanups to the start of the pex_ep_event_pex_rst_deassert() function. This function is called whenever the host has deasserted PERST# and it is guaranteed that the refclk would be active at this point. So at the start of this function (after enabling resources) the controller cleanup can be performed. Once finished, rest of the code execution for PERST# deassert can continue as usual. Fixes: 473b2cf9c4d1 ("PCI: endpoint: Introduce 'epc_deinit' event and notify the EPF drivers") Fixes: 570d7715eed8 ("PCI: dwc: ep: Introduce dw_pcie_ep_cleanup() API for drivers supporting PERST#") Link: https://lore.kernel.org/r/20240817-pci-qcom-ep-cleanup-v1-2-d6b958226559@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Vidya Sagar <vidyas@nvidia.com> Cc: linux-tegra@vger.kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 40e2125381dc11379112485e3eefdd25c6df5375 ]

Currently, the endpoint cleanup function dw_pcie_ep_cleanup() and EPF
deinit notify function pci_epc_deinit_notify() are called during the
execution of pex_ep_event_pex_rst_assert() i.e., when the host has asserted
PERST#. But quickly after this step, refclk will also be disabled by the
host.

All of the tegra194 endpoint SoCs supported as of now depend on the refclk
from the host for keeping the controller operational. Due to this
limitation, any access to the hardware registers in the absence of refclk
will result in a whole endpoint crash. Unfortunately, most of the
controller cleanups require accessing the hardware registers (like eDMA
cleanup performed in dw_pcie_ep_cleanup(), etc...). So these cleanup
functions can cause the crash in the endpoint SoC once host asserts PERST#.

One way to address this issue is by generating the refclk in the endpoint
itself and not depending on the host. But that is not always possible as
some of the endpoint designs do require the endpoint to consume refclk from
the host.

Thus, fix this crash by moving the controller cleanups to the start of
the pex_ep_event_pex_rst_deassert() function. This function is called
whenever the host has deasserted PERST# and it is guaranteed that the
refclk would be active at this point. So at the start of this function
(after enabling resources) the controller cleanup can be performed. Once
finished, rest of the code execution for PERST# deassert can continue as
usual.

Fixes: 473b2cf9c4d1 ("PCI: endpoint: Introduce 'epc_deinit' event and notify the EPF drivers")
Fixes: 570d7715eed8 ("PCI: dwc: ep: Introduce dw_pcie_ep_cleanup() API for drivers supporting PERST#")
Link: https://lore.kernel.org/r/20240817-pci-qcom-ep-cleanup-v1-2-d6b958226559@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Vidya Sagar <vidyas@nvidia.com>
Cc: linux-tegra@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
PCI: qcom-ep: Move controller cleanups to qcom_pcie_perst_deassert() 2024-12-05T12:53:49+00:00 Manivannan Sadhasivam manivannan.sadhasivam@linaro.org 2024-08-17T05:39:03+00:00 e03b5f1615c84f4139cb53ef8659f4cdb8d6a563 [ Upstream commit 7d7cf89b119af433354f865fc01017b9f8aa411a ] Currently, the endpoint cleanup function dw_pcie_ep_cleanup() and EPF deinit notify function pci_epc_deinit_notify() are called during the execution of qcom_pcie_perst_assert() i.e., when the host has asserted PERST#. But quickly after this step, refclk will also be disabled by the host. All of the Qcom endpoint SoCs supported as of now depend on the refclk from the host for keeping the controller operational. Due to this limitation, any access to the hardware registers in the absence of refclk will result in a whole endpoint crash. Unfortunately, most of the controller cleanups require accessing the hardware registers (like eDMA cleanup performed in dw_pcie_ep_cleanup(), powering down MHI EPF etc...). So these cleanup functions are currently causing the crash in the endpoint SoC once host asserts PERST#. One way to address this issue is by generating the refclk in the endpoint itself and not depending on the host. But that is not always possible as some of the endpoint designs do require the endpoint to consume refclk from the host (as I was told by the Qcom engineers). Thus, fix this crash by moving the controller cleanups to the start of the qcom_pcie_perst_deassert() function. qcom_pcie_perst_deassert() is called whenever the host has deasserted PERST# and it is guaranteed that the refclk would be active at this point. So at the start of this function (after enabling resources), the controller cleanup can be performed. Once finished, rest of the code execution for PERST# deassert can continue as usual. Fixes: 473b2cf9c4d1 ("PCI: endpoint: Introduce 'epc_deinit' event and notify the EPF drivers") Fixes: 570d7715eed8 ("PCI: dwc: ep: Introduce dw_pcie_ep_cleanup() API for drivers supporting PERST#") Link: https://lore.kernel.org/r/20240817-pci-qcom-ep-cleanup-v1-1-d6b958226559@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 7d7cf89b119af433354f865fc01017b9f8aa411a ]

Currently, the endpoint cleanup function dw_pcie_ep_cleanup() and EPF
deinit notify function pci_epc_deinit_notify() are called during the
execution of qcom_pcie_perst_assert() i.e., when the host has asserted
PERST#. But quickly after this step, refclk will also be disabled by the
host.

All of the Qcom endpoint SoCs supported as of now depend on the refclk from
the host for keeping the controller operational. Due to this limitation,
any access to the hardware registers in the absence of refclk will result
in a whole endpoint crash. Unfortunately, most of the controller cleanups
require accessing the hardware registers (like eDMA cleanup performed in
dw_pcie_ep_cleanup(), powering down MHI EPF etc...). So these cleanup
functions are currently causing the crash in the endpoint SoC once host
asserts PERST#.

One way to address this issue is by generating the refclk in the endpoint
itself and not depending on the host. But that is not always possible as
some of the endpoint designs do require the endpoint to consume refclk from
the host (as I was told by the Qcom engineers).

Thus, fix this crash by moving the controller cleanups to the start of
the qcom_pcie_perst_deassert() function. qcom_pcie_perst_deassert() is
called whenever the host has deasserted PERST# and it is guaranteed that
the refclk would be active at this point. So at the start of this function
(after enabling resources), the controller cleanup can be performed. Once
finished, rest of the code execution for PERST# deassert can continue as
usual.

Fixes: 473b2cf9c4d1 ("PCI: endpoint: Introduce 'epc_deinit' event and notify the EPF drivers")
Fixes: 570d7715eed8 ("PCI: dwc: ep: Introduce dw_pcie_ep_cleanup() API for drivers supporting PERST#")
Link: https://lore.kernel.org/r/20240817-pci-qcom-ep-cleanup-v1-1-d6b958226559@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
PCI: qcom: Disable mirroring of DBI and iATU register space in BAR region 2024-10-17T13:26:37+00:00 Prudhvi Yarlagadda quic_pyarlaga@quicinc.com 2024-08-14T22:03:38+00:00 5a2756b2c276d08e8bada7e9828cdd9ca66e8e31 [ Upstream commit 10ba0854c5e6165b58e17bda5fb671e729fecf9e ] PARF hardware block which is a wrapper on top of DWC PCIe controller mirrors the DBI and ATU register space. It uses PARF_SLV_ADDR_SPACE_SIZE register to get the size of the memory block to be mirrored and uses PARF_DBI_BASE_ADDR, PARF_ATU_BASE_ADDR registers to determine the base address of DBI and ATU space inside the memory block that is being mirrored. When a memory region which is located above the SLV_ADDR_SPACE_SIZE boundary is used for BAR region then there could be an overlap of DBI and ATU address space that is getting mirrored and the BAR region. This results in DBI and ATU address space contents getting updated when a PCIe function driver tries updating the BAR/MMIO memory region. Reference memory map of the PCIe memory region with DBI and ATU address space overlapping BAR region is as below. |---------------| | | | | ------- --------|---------------| | | |---------------| | | | DBI | | | |---------------|---->DBI_BASE_ADDR | | | | | | | | | PCIe | |---->2*SLV_ADDR_SPACE_SIZE | BAR/MMIO|---------------| | Region | ATU | | | |---------------|---->ATU_BASE_ADDR | | | | PCIe | |---------------| Memory | | DBI | Region | |---------------|---->DBI_BASE_ADDR | | | | | --------| | | | |---->SLV_ADDR_SPACE_SIZE | |---------------| | | ATU | | |---------------|---->ATU_BASE_ADDR | | | | |---------------| | | DBI | | |---------------|---->DBI_BASE_ADDR | | | | | | ----------------|---------------| | | | | | | |---------------| Currently memory region beyond the SLV_ADDR_SPACE_SIZE boundary is not used for BAR region which is why the above mentioned issue is not encountered. This issue is discovered as part of internal testing when we tried moving the BAR region beyond the SLV_ADDR_SPACE_SIZE boundary. Hence we are trying to fix this. As PARF hardware block mirrors DBI and ATU register space after every PARF_SLV_ADDR_SPACE_SIZE (default 0x1000000) boundary multiple, program maximum possible size to this register by writing 0x80000000 to it(it considers only powers of 2 as values) to avoid mirroring DBI and ATU to BAR/MMIO region. Write the physical base address of DBI and ATU register blocks to PARF_DBI_BASE_ADDR (default 0x0) and PARF_ATU_BASE_ADDR (default 0x1000) respectively to make sure DBI and ATU blocks are at expected memory locations. The register offsets PARF_DBI_BASE_ADDR_V2, PARF_SLV_ADDR_SPACE_SIZE_V2 and PARF_ATU_BASE_ADDR are applicable for platforms that use Qcom IP rev 1.9.0, 2.7.0 and 2.9.0. PARF_DBI_BASE_ADDR_V2 and PARF_SLV_ADDR_SPACE_SIZE_V2 are applicable for Qcom IP rev 2.3.3. PARF_DBI_BASE_ADDR and PARF_SLV_ADDR_SPACE_SIZE are applicable for Qcom IP rev 1.0.0, 2.3.2 and 2.4.0. Update init()/post_init() functions of the respective Qcom IP versions to program applicable PARF_DBI_BASE_ADDR, PARF_SLV_ADDR_SPACE_SIZE and PARF_ATU_BASE_ADDR register offsets. Update the SLV_ADDR_SPACE_SZ macro to 0x80000000 to set highest bit in PARF_SLV_ADDR_SPACE_SIZE register. Cache DBI and iATU physical addresses in 'struct dw_pcie' so that pcie_qcom.c driver can program these addresses in the PARF_DBI_BASE_ADDR and PARF_ATU_BASE_ADDR registers. Suggested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/linux-pci/20240814220338.1969668-1-quic_pyarlaga@quicinc.com Signed-off-by: Prudhvi Yarlagadda <quic_pyarlaga@quicinc.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Mayank Rana <quic_mrana@quicinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 10ba0854c5e6165b58e17bda5fb671e729fecf9e ]

PARF hardware block which is a wrapper on top of DWC PCIe controller
mirrors the DBI and ATU register space. It uses PARF_SLV_ADDR_SPACE_SIZE
register to get the size of the memory block to be mirrored and uses
PARF_DBI_BASE_ADDR, PARF_ATU_BASE_ADDR registers to determine the base
address of DBI and ATU space inside the memory block that is being
mirrored.

When a memory region which is located above the SLV_ADDR_SPACE_SIZE
boundary is used for BAR region then there could be an overlap of DBI and
ATU address space that is getting mirrored and the BAR region. This
results in DBI and ATU address space contents getting updated when a PCIe
function driver tries updating the BAR/MMIO memory region. Reference
memory map of the PCIe memory region with DBI and ATU address space
overlapping BAR region is as below.

                        |---------------|
                        |               |
                        |               |
        ------- --------|---------------|
           |       |    |---------------|
           |       |    |       DBI     |
           |       |    |---------------|---->DBI_BASE_ADDR
           |       |    |               |
           |       |    |               |
           |    PCIe    |               |---->2*SLV_ADDR_SPACE_SIZE
           |    BAR/MMIO|---------------|
           |    Region  |       ATU     |
           |       |    |---------------|---->ATU_BASE_ADDR
           |       |    |               |
        PCIe       |    |---------------|
        Memory     |    |       DBI     |
        Region     |    |---------------|---->DBI_BASE_ADDR
           |       |    |               |
           |    --------|               |
           |            |               |---->SLV_ADDR_SPACE_SIZE
           |            |---------------|
           |            |       ATU     |
           |            |---------------|---->ATU_BASE_ADDR
           |            |               |
           |            |---------------|
           |            |       DBI     |
           |            |---------------|---->DBI_BASE_ADDR
           |            |               |
           |            |               |
        ----------------|---------------|
                        |               |
                        |               |
                        |               |
                        |---------------|

Currently memory region beyond the SLV_ADDR_SPACE_SIZE boundary is not
used for BAR region which is why the above mentioned issue is not
encountered. This issue is discovered as part of internal testing when we
tried moving the BAR region beyond the SLV_ADDR_SPACE_SIZE boundary. Hence
we are trying to fix this.

As PARF hardware block mirrors DBI and ATU register space after every
PARF_SLV_ADDR_SPACE_SIZE (default 0x1000000) boundary multiple, program
maximum possible size to this register by writing 0x80000000 to it(it
considers only powers of 2 as values) to avoid mirroring DBI and ATU to
BAR/MMIO region. Write the physical base address of DBI and ATU register
blocks to PARF_DBI_BASE_ADDR (default 0x0) and PARF_ATU_BASE_ADDR (default
0x1000) respectively to make sure DBI and ATU blocks are at expected
memory locations.

The register offsets PARF_DBI_BASE_ADDR_V2, PARF_SLV_ADDR_SPACE_SIZE_V2
and PARF_ATU_BASE_ADDR are applicable for platforms that use Qcom IP
rev 1.9.0, 2.7.0 and 2.9.0. PARF_DBI_BASE_ADDR_V2 and
PARF_SLV_ADDR_SPACE_SIZE_V2 are applicable for Qcom IP rev 2.3.3.
PARF_DBI_BASE_ADDR and PARF_SLV_ADDR_SPACE_SIZE are applicable for Qcom
IP rev 1.0.0, 2.3.2 and 2.4.0. Update init()/post_init() functions of the
respective Qcom IP versions to program applicable PARF_DBI_BASE_ADDR,
PARF_SLV_ADDR_SPACE_SIZE and PARF_ATU_BASE_ADDR register offsets. Update
the SLV_ADDR_SPACE_SZ macro to 0x80000000 to set highest bit in
PARF_SLV_ADDR_SPACE_SIZE register.

Cache DBI and iATU physical addresses in 'struct dw_pcie' so that
pcie_qcom.c driver can program these addresses in the PARF_DBI_BASE_ADDR
and PARF_ATU_BASE_ADDR registers.

Suggested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/linux-pci/20240814220338.1969668-1-quic_pyarlaga@quicinc.com
Signed-off-by: Prudhvi Yarlagadda <quic_pyarlaga@quicinc.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Mayank Rana <quic_mrana@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
PCI: dra7xx: Fix error handling when IRQ request fails in probe 2024-10-04T14:38:31+00:00 Siddharth Vadapalli s-vadapalli@ti.com 2024-08-27T12:24:22+00:00 ed857be045b1c286e16f104a7ce3fd20bbb2a442 commit 4d60f6d4b8fa4d7bad4aeb2b3ee5c10425bc60a4 upstream. Commit d4c7d1a089d6 ("PCI: dwc: dra7xx: Push request_irq() call to the bottom of probe") moved the IRQ request for "dra7xx-pcie-main" towards the end of dra7xx_pcie_probe(). However, the error handling does not take into account the initialization performed by either dra7xx_add_pcie_port() or dra7xx_add_pcie_ep(), depending on the mode of operation. Fix the error handling to address this. Fixes: d4c7d1a089d6 ("PCI: dwc: dra7xx: Push request_irq() call to the bottom of probe") Link: https://lore.kernel.org/linux-pci/20240827122422.985547-3-s-vadapalli@ti.com Tested-by: Udit Kumar <u-kumar1@ti.com> Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> [kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 4d60f6d4b8fa4d7bad4aeb2b3ee5c10425bc60a4 upstream.

Commit d4c7d1a089d6 ("PCI: dwc: dra7xx: Push request_irq()
call to the bottom of probe") moved the IRQ request for
"dra7xx-pcie-main" towards the end of dra7xx_pcie_probe().

However, the error handling does not take into account the
initialization performed by either dra7xx_add_pcie_port() or
dra7xx_add_pcie_ep(), depending on the mode of operation.

Fix the error handling to address this.

Fixes: d4c7d1a089d6 ("PCI: dwc: dra7xx: Push request_irq() call to the bottom of probe")
Link: https://lore.kernel.org/linux-pci/20240827122422.985547-3-s-vadapalli@ti.com
Tested-by: Udit Kumar <u-kumar1@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI: imx6: Fix i.MX8MP PCIe EP's occasional failure to trigger MSI 2024-10-04T14:38:30+00:00 Richard Zhu hongxing.zhu@nxp.com 2024-07-29T20:18:09+00:00 58804098bc928ecdf901a90dc3e61c131f99022e commit 5cb3aa92c7cf182940ae575c3f450d3708af087c upstream. Correct occasional MSI triggering failures in i.MX8MP PCIe EP by applying the correct hardware outbound alignment requirement. The i.MX platform has a restriction about outbound address translation. The pci-epc-mem uses page_size to manage it. Set the correct page_size for i.MX platform to meet the hardware requirement, which is the same as inbound address alignment. Thus, align it with epc_features::align. Fixes: 1bd0d43dcf3b ("PCI: imx6: Clean up addr_space retrieval code") Link: https://lore.kernel.org/linux-pci/20240729-pci2_upstream-v8-2-b68ee5ef2b4d@nxp.com Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> [kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Jason Liu <jason.hui.liu@nxp.com> Cc: <stable@vger.kernel.org> # 6.9+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 5cb3aa92c7cf182940ae575c3f450d3708af087c upstream.

Correct occasional MSI triggering failures in i.MX8MP PCIe EP by applying
the correct hardware outbound alignment requirement.

The i.MX platform has a restriction about outbound address translation. The
pci-epc-mem uses page_size to manage it. Set the correct page_size for i.MX
platform to meet the hardware requirement, which is the same as inbound
address alignment.

Thus, align it with epc_features::align.

Fixes: 1bd0d43dcf3b ("PCI: imx6: Clean up addr_space retrieval code")
Link: https://lore.kernel.org/linux-pci/20240729-pci2_upstream-v8-2-b68ee5ef2b4d@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Jason Liu <jason.hui.liu@nxp.com>
Cc: <stable@vger.kernel.org> # 6.9+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI: imx6: Fix establish link failure in EP mode for i.MX8MM and i.MX8MP 2024-10-04T14:38:30+00:00 Richard Zhu hongxing.zhu@nxp.com 2024-07-29T20:18:08+00:00 12d7ac6b73fe535b37f2c6a7485569ae8b365384 commit 5214ff221a14cadab1e2ee29499750fd5e884feb upstream. Add IMX6_PCIE_FLAG_HAS_APP_RESET flag to IMX8MM_EP and IMX8MP_EP drvdata. This flag was overlooked during code restructuring. It is crucial to release the app-reset from the System Reset Controller before initiating LTSSM to rectify the issue. Fixes: 0c9651c21f2a ("PCI: imx6: Simplify reset handling by using *_FLAG_HAS_*_RESET") Link: https://lore.kernel.org/linux-pci/20240729-pci2_upstream-v8-1-b68ee5ef2b4d@nxp.com Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> [kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: <stable@vger.kernel.org> # 6.9+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 5214ff221a14cadab1e2ee29499750fd5e884feb upstream.

Add IMX6_PCIE_FLAG_HAS_APP_RESET flag to IMX8MM_EP and IMX8MP_EP drvdata.

This flag was overlooked during code restructuring. It is crucial to
release the app-reset from the System Reset Controller before initiating
LTSSM to rectify the issue.

Fixes: 0c9651c21f2a ("PCI: imx6: Simplify reset handling by using *_FLAG_HAS_*_RESET")
Link: https://lore.kernel.org/linux-pci/20240729-pci2_upstream-v8-1-b68ee5ef2b4d@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: <stable@vger.kernel.org> # 6.9+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI: imx6: Fix missing call to phy_power_off() in error handling 2024-10-04T14:38:30+00:00 Frank Li Frank.Li@nxp.com 2024-07-29T20:18:10+00:00 1ade5b2ce4be102f360c92dcdf50b37b90f9a188 commit 5b04d44d5c74e4d8aab1678496b84700b4b343fe upstream. Fix missing call to phy_power_off() in the error path of imx6_pcie_host_init(). Remove unnecessary check for imx6_pcie->phy as the PHY API already handles NULL pointers. Fixes: cbcf8722b523 ("phy: freescale: imx8m-pcie: Fix the wrong order of phy_init() and phy_power_on()") Link: https://lore.kernel.org/linux-pci/20240729-pci2_upstream-v8-3-b68ee5ef2b4d@nxp.com Signed-off-by: Frank Li <Frank.Li@nxp.com> [kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: <stable@vger.kernel.org> # 6.1+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 5b04d44d5c74e4d8aab1678496b84700b4b343fe upstream.

Fix missing call to phy_power_off() in the error path of
imx6_pcie_host_init(). Remove unnecessary check for imx6_pcie->phy
as the PHY API already handles NULL pointers.

Fixes: cbcf8722b523 ("phy: freescale: imx8m-pcie: Fix the wrong order of phy_init() and phy_power_on()")
Link: https://lore.kernel.org/linux-pci/20240729-pci2_upstream-v8-3-b68ee5ef2b4d@nxp.com
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: <stable@vger.kernel.org> # 6.1+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI: dra7xx: Fix threaded IRQ request for "dra7xx-pcie-main" IRQ 2024-10-04T14:38:30+00:00 Siddharth Vadapalli s-vadapalli@ti.com 2024-08-27T12:24:21+00:00 29cc2c2383f8e68170d1652feb6077f4e3684a59 commit 03f84b3baba7836bdfc162c19288d5ce1aa92890 upstream. Commit da87d35a6e51 ("PCI: dra7xx: Use threaded IRQ handler for "dra7xx-pcie-main" IRQ") switched from devm_request_irq() to devm_request_threaded_irq() for the "dra7xx-pcie-main" interrupt. Since the primary handler was set to NULL, the "IRQF_ONESHOT" flag should have also been set. Fix this. Fixes: da87d35a6e51 ("PCI: dra7xx: Use threaded IRQ handler for "dra7xx-pcie-main" IRQ") Suggested-by: Vignesh Raghavendra <vigneshr@ti.com> Link: https://lore.kernel.org/linux-pci/20240827122422.985547-2-s-vadapalli@ti.com Reported-by: Udit Kumar <u-kumar1@ti.com> Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 03f84b3baba7836bdfc162c19288d5ce1aa92890 upstream.

Commit da87d35a6e51 ("PCI: dra7xx: Use threaded IRQ handler for
"dra7xx-pcie-main" IRQ") switched from devm_request_irq() to
devm_request_threaded_irq() for the "dra7xx-pcie-main" interrupt.

Since the primary handler was set to NULL, the "IRQF_ONESHOT" flag
should have also been set. Fix this.

Fixes: da87d35a6e51 ("PCI: dra7xx: Use threaded IRQ handler for "dra7xx-pcie-main" IRQ")
Suggested-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/linux-pci/20240827122422.985547-2-s-vadapalli@ti.com
Reported-by: Udit Kumar <u-kumar1@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI: qcom-ep: Enable controller resources like PHY only after refclk is available 2024-10-04T14:38:16+00:00 Manivannan Sadhasivam manivannan.sadhasivam@linaro.org 2024-08-30T08:23:19+00:00 d0f1b4734baed35e23a1701f7d4d9333693f8d66 [ Upstream commit d3745e3ae6c0eec517d431be926742b6e8b9b64a ] qcom_pcie_enable_resources() is called by qcom_pcie_ep_probe() and it enables the controller resources like clocks, regulator, PHY. On one of the new unreleased Qcom SoC, PHY enablement depends on the active refclk. And on all of the supported Qcom endpoint SoCs, refclk comes from the host (RC). So calling qcom_pcie_enable_resources() without refclk causes the NoC (Network On Chip) error in the endpoint SoC and in turn results in a whole SoC crash and rebooting into EDL (Emergency Download) mode which is an unrecoverable state. But qcom_pcie_enable_resources() is already called by qcom_pcie_perst_deassert() when PERST# is deasserted, and refclk is available at that time. Hence, remove the unnecessary call to qcom_pcie_enable_resources() from qcom_pcie_ep_probe() to prevent the above mentioned crash. It should be noted that this commit prevents the crash only under normal working condition (booting endpoint before host), but the crash may also occur if PERST# assert happens at the wrong time. For avoiding the crash completely, it is recommended to use SRIS mode which allows the endpoint SoC to generate its own refclk. The driver is not supporting SRIS mode currently, but will be added in the future. Fixes: 869bc5253406 ("PCI: dwc: ep: Fix DBI access failure for drivers requiring refclk from host") Link: https://lore.kernel.org/linux-pci/20240830082319.51387-1-manivannan.sadhasivam@linaro.org Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit d3745e3ae6c0eec517d431be926742b6e8b9b64a ]

qcom_pcie_enable_resources() is called by qcom_pcie_ep_probe() and it
enables the controller resources like clocks, regulator, PHY. On one of the
new unreleased Qcom SoC, PHY enablement depends on the active refclk. And
on all of the supported Qcom endpoint SoCs, refclk comes from the host
(RC). So calling qcom_pcie_enable_resources() without refclk causes the
NoC (Network On Chip) error in the endpoint SoC and in turn results in a
whole SoC crash and rebooting into EDL (Emergency Download) mode which is
an unrecoverable state.

But qcom_pcie_enable_resources() is already called by
qcom_pcie_perst_deassert() when PERST# is deasserted, and refclk is
available at that time.

Hence, remove the unnecessary call to qcom_pcie_enable_resources() from
qcom_pcie_ep_probe() to prevent the above mentioned crash.

It should be noted that this commit prevents the crash only under normal
working condition (booting endpoint before host), but the crash may also
occur if PERST# assert happens at the wrong time. For avoiding the crash
completely, it is recommended to use SRIS mode which allows the endpoint
SoC to generate its own refclk. The driver is not supporting SRIS mode
currently, but will be added in the future.

Fixes: 869bc5253406 ("PCI: dwc: ep: Fix DBI access failure for drivers requiring refclk from host")
Link: https://lore.kernel.org/linux-pci/20240830082319.51387-1-manivannan.sadhasivam@linaro.org
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
PCI: kirin: Fix buffer overflow in kirin_pcie_parse_port() 2024-10-04T14:38:13+00:00 Alexandra Diupina adiupina@astralinux.ru 2024-09-03T11:58:23+00:00 aeb0335971806e15ac91e838ca471936c8e7efd5 [ Upstream commit c500a86693a126c9393e602741e348f80f1b0fc5 ] Within kirin_pcie_parse_port(), the pcie->num_slots is compared to pcie->gpio_id_reset size (MAX_PCI_SLOTS) which is correct and would lead to an overflow. Thus, fix condition to pcie->num_slots + 1 >= MAX_PCI_SLOTS and move pcie->num_slots increment below the if-statement to avoid out-of-bounds array access. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: b22dbbb24571 ("PCI: kirin: Support PERST# GPIOs for HiKey970 external PEX 8606 bridge") Link: https://lore.kernel.org/linux-pci/20240903115823.30647-1-adiupina@astralinux.ru Signed-off-by: Alexandra Diupina <adiupina@astralinux.ru> [kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit c500a86693a126c9393e602741e348f80f1b0fc5 ]

Within kirin_pcie_parse_port(), the pcie->num_slots is compared to
pcie->gpio_id_reset size (MAX_PCI_SLOTS) which is correct and would lead
to an overflow.

Thus, fix condition to pcie->num_slots + 1 >= MAX_PCI_SLOTS and move
pcie->num_slots increment below the if-statement to avoid out-of-bounds
array access.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: b22dbbb24571 ("PCI: kirin: Support PERST# GPIOs for HiKey970 external PEX 8606 bridge")
Link: https://lore.kernel.org/linux-pci/20240903115823.30647-1-adiupina@astralinux.ru
Signed-off-by: Alexandra Diupina <adiupina@astralinux.ru>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>