linux-stable.git/drivers/of, branch v6.10

of/irq: Disable "interrupt-map" parsing for PASEMI Nemo

2024-07-08T21:42:20+00:00

Once again, we've broken PASEMI Nemo boards with its incomplete
"interrupt-map" translations. Commit 935df1bd40d4 ("of/irq: Factor out
parsing of interrupt-map parent phandle+args from of_irq_parse_raw()")
changed the behavior resulting in the existing work-around not taking
effect. Rework the work-around to just skip parsing "interrupt-map" up
front by using the of_irq_imap_abusers list.

Fixes: 935df1bd40d4 ("of/irq: Factor out parsing of interrupt-map parent phandle+args from of_irq_parse_raw()")
Reported-by: Christian Zigotzky 
Signed-off-by: Marc Zyngier 
Link: https://lore.kernel.org/r/86ed8ba2sp.wl-maz@kernel.org
Signed-off-by: Rob Herring (Arm)

of: property: Fix fw_devlink handling of interrupt-map

2024-05-31T00:43:47+00:00

Commit d976c6f4b32c ("of: property: Add fw_devlink support for
interrupt-map property") tried to do what it says on the tin,
but failed on a couple of points:

- it confuses bytes and cells. Not a huge deal, except when it
  comes to pointer arithmetic

- it doesn't really handle anything but interrupt-maps that have
  their parent #address-cells set to 0

The combinations of the two leads to some serious fun on my M1
box, with plenty of WARN-ON() firing all over the shop, and
amusing values being generated for interrupt specifiers.

Having 2 versions of parsing code for "interrupt-map" was a bad
idea. Now that the common parsing parts have been refactored
into of_irq_parse_imap_parent(), rework the code here to use it
instead and fix the pointer arithmetic.

Note that the dependency will be a bit different than the original code
when the interrupt-map points to another interrupt-map. In this case,
the original code would resolve to the final interrupt controller. Now
the dependency is the parent interrupt-map (which itself should have a
dependency to the parent). It is possible that a node with an
interrupt-map has no driver.

Fixes: d976c6f4b32c ("of: property: Add fw_devlink support for interrupt-map property")
Signed-off-by: Marc Zyngier 
Co-developed-by: Rob Herring (Arm) 
Cc: Saravana Kannan 
Tested-by: Marc Zyngier 
Tested-by: Anup Patel 
Link: https://lore.kernel.org/r/20240529-dt-interrupt-map-fix-v2-2-ef86dc5bcd2a@kernel.org
Signed-off-by: Rob Herring (Arm)

of/irq: Factor out parsing of interrupt-map parent phandle+args from of_irq_parse_raw()

2024-05-31T00:43:19+00:00

Factor out the parsing of interrupt-map interrupt parent phandle and its
arg cells to a separate function, of_irq_parse_imap_parent(), so that it
can be used in other parsing scenarios (e.g. fw_devlink).

There was a refcount leak on non-matching entries when iterating thru
"interrupt-map" which is fixed.

Tested-by: Marc Zyngier 
Tested-by: Anup Patel 
Link: https://lore.kernel.org/r/20240529-dt-interrupt-map-fix-v2-1-ef86dc5bcd2a@kernel.org
Signed-off-by: Rob Herring (Arm)

of: of_test: add MODULE_DESCRIPTION()

2024-05-28T17:10:00+00:00

Fix the 'make W=1' warning:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/of/of_test.o

Signed-off-by: Jeff Johnson 
Link: https://lore.kernel.org/r/20240524-md-of-of_test-v1-1-6ebd078d620f@quicinc.com
Signed-off-by: Rob Herring (Arm)

Merge tag 'i2c-for-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

2024-05-20T15:55:18+00:00

Pull i2c updates from Wolfram Sang:
 "i2c core removes an argument from the i2c_mux_add_adapter() call to
  further deprecate class based I2C device instantiation. All users are
  converted, too.

  Other that that, Andi collected a number if I2C host driver patches.
  Those merges have their own description"

* tag 'i2c-for-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (72 commits)
  power: supply: sbs-manager: Remove class argument from i2c_mux_add_adapter()
  i2c: mux: Remove class argument from i2c_mux_add_adapter()
  i2c: synquacer: Fix an error handling path in synquacer_i2c_probe()
  i2c: acpi: Unbind mux adapters before delete
  i2c: designware: Replace MODULE_ALIAS() with MODULE_DEVICE_TABLE()
  i2c: pxa: use 'time_left' variable with wait_event_timeout()
  i2c: s3c2410: use 'time_left' variable with wait_event_timeout()
  i2c: rk3x: use 'time_left' variable with wait_event_timeout()
  i2c: qcom-geni: use 'time_left' variable with wait_for_completion_timeout()
  i2c: jz4780: use 'time_left' variable with wait_for_completion_timeout()
  i2c: synquacer: use 'time_left' variable with wait_for_completion_timeout()
  i2c: stm32f7: use 'time_left' variable with wait_for_completion_timeout()
  i2c: stm32f4: use 'time_left' variable with wait_for_completion_timeout()
  i2c: st: use 'time_left' variable with wait_for_completion_timeout()
  i2c: omap: use 'time_left' variable with wait_for_completion_timeout()
  i2c: imx-lpi2c: use 'time_left' variable with wait_for_completion_timeout()
  i2c: hix5hd2: use 'time_left' variable with wait_for_completion_timeout()
  i2c: exynos5: use 'time_left' variable with wait_for_completion_timeout()
  i2c: digicolor: use 'time_left' variable with wait_for_completion_timeout()
  i2c: amd-mp2-plat: use 'time_left' variable with wait_for_completion_timeout()
  ...

Merge tag 'iommu-updates-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

2024-05-18T17:55:13+00:00

Pull iommu updates from Joerg Roedel:
 "Core:
   - IOMMU memory usage observability - This will make the memory used
     for IO page tables explicitly visible.
   - Simplify arch_setup_dma_ops()

  Intel VT-d:
   - Consolidate domain cache invalidation
   - Remove private data from page fault message
   - Allocate DMAR fault interrupts locally
   - Cleanup and refactoring

  ARM-SMMUv2:
   - Support for fault debugging hardware on Qualcomm implementations
   - Re-land support for the ->domain_alloc_paging() callback

  ARM-SMMUv3:
   - Improve handling of MSI allocation failure
   - Drop support for the "disable_bypass" cmdline option
   - Major rework of the CD creation code, following on directly from
     the STE rework merged last time around.
   - Add unit tests for the new STE/CD manipulation logic

  AMD-Vi:
   - Final part of SVA changes with generic IO page fault handling

  Renesas IPMMU:
   - Add support for R8A779H0 hardware

  ... and a couple smaller fixes and updates across the sub-tree"

* tag 'iommu-updates-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (80 commits)
  iommu/arm-smmu-v3: Make the kunit into a module
  arm64: Properly clean up iommu-dma remnants
  iommu/amd: Enable Guest Translation after reading IOMMU feature register
  iommu/vt-d: Decouple igfx_off from graphic identity mapping
  iommu/amd: Fix compilation error
  iommu/arm-smmu-v3: Add unit tests for arm_smmu_write_entry
  iommu/arm-smmu-v3: Build the whole CD in arm_smmu_make_s1_cd()
  iommu/arm-smmu-v3: Move the CD generation for SVA into a function
  iommu/arm-smmu-v3: Allocate the CD table entry in advance
  iommu/arm-smmu-v3: Make arm_smmu_alloc_cd_ptr()
  iommu/arm-smmu-v3: Consolidate clearing a CD table entry
  iommu/arm-smmu-v3: Move the CD generation for S1 domains into a function
  iommu/arm-smmu-v3: Make CD programming use arm_smmu_write_entry()
  iommu/arm-smmu-v3: Add an ops indirection to the STE code
  iommu/arm-smmu-qcom: Don't build debug features as a kernel module
  iommu/amd: Add SVA domain support
  iommu: Add ops->domain_alloc_sva()
  iommu/amd: Initial SVA support for AMD IOMMU
  iommu/amd: Add support for enable/disable IOPF
  iommu/amd: Add IO page fault notifier handler
  ...

Merge tag 'devicetree-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

2024-05-18T00:27:49+00:00

Pull devicetree updates from Rob Herring:
 "DT Bindings:

   - Convert samsung,exynos5-dp, atmel,lcdc, aspeed,ast2400-wdt bindings
     to schemas

   - Add bindings for Allwinner H616 NMI controller, Renesas r8a779g0
     irqc, Renesas R-Car V4M TMU and CMT timers, Freescale S32G3
     linflexuart, and Mediatek MT7988 XHCI

   - Add 'reg' constraints on DSI and SPI display panels

   - More dropping of unnecessary quotes in schemas

   - Use full paths rather than relative paths in schema $refs

   - Drop redundant storing of phandle for reserved memory

  DT Core:

   - Use scope based cleanups for kfree() and of_node_put()

   - Track interrupt-map and power-supplies for fw_devlink

   - Add buffer overflow check in of_modalias()

   - Add and use __of_prop_free() helper for freeing struct property"

* tag 'devicetree-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (25 commits)
  of: property: Add fw_devlink support for interrupt-map property
  dt-bindings: display: panel: constrain 'reg' in DSI panels
  dt-bindings: display: panel: constrain 'reg' in SPI panels
  dt-bindings: display: samsung,ams495qa01: add missing SPI properties ref
  dt-bindings: Use full path to other schemas
  dt-bindings: PCI: qcom,pcie-sm8350: Drop redundant 'oneOf' sub-schema
  of: module: add buffer overflow check in of_modalias()
  dt-bindings: PCI: microchip: increase number of items in ranges property
  dt-bindings: Drop unnecessary quotes on keys
  dt-bindings: interrupt-controller: mediatek,mt6577-sysirq: Drop unnecessary quotes
  of: property: Use scope based cleanup on port_node
  of: reserved_mem: Remove the use of phandle from the reserved_mem APIs
  of: property: fw_devlink: Add support for "power-supplies" binding
  dt-bindings: watchdog: aspeed,ast2400-wdt: Convert to DT schema
  dt-bindings: irq: sun7i-nmi: Add binding for the H616 NMI controller
  dt-bindings: interrupt-controller: renesas,irqc: Add r8a779g0 support
  dt-bindings: timer: renesas,tmu: Add R-Car V4M support
  dt-bindings: timer: renesas,cmt: Add R-Car V4M support
  of: Use scope based of_node_put() cleanups
  of: Use scope based kfree() cleanups
  ...

Merge tag 'net-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2024-05-15T02:42:24+00:00

Pull networking updates from Jakub Kicinski:
"Core & protocols:

- Complete rework of garbage collection of AF_UNIX sockets.

AF_UNIX is prone to forming reference count cycles due to fd
passing functionality. New method based on Tarjan's Strongly
Connected Components algorithm should be both faster and remove a
lot of workarounds we accumulated over the years.

- Add TCP fraglist GRO support, allowing chaining multiple TCP
packets and forwarding them together. Useful for small switches /
routers which lack basic checksum offload in some scenarios (e.g.
PPPoE).

- Support using SMP threads for handling packet backlog i.e. packet
processing from software interfaces and old drivers which don't use
NAPI. This helps move the processing out of the softirq jumble.

- Continue work of converting from rtnl lock to RCU protection.

Don't require rtnl lock when reading: IPv6 routing FIB, IPv6
address labels, netdev threaded NAPI sysfs files, bonding driver's
sysfs files, MPLS devconf, IPv4 FIB rules, netns IDs, tcp metrics,
TC Qdiscs, neighbor entries, ARP entries via ioctl(SIOCGARP), a lot
of the link information available via rtnetlink.

- Small optimizations from Eric to UDP wake up handling, memory
accounting, RPS/RFS implementation, TCP packet sizing etc.

- Allow direct page recycling in the bulk API used by XDP, for +2%
PPS.

- Support peek with an offset on TCP sockets.

- Add MPTCP APIs for querying last time packets were received/sent/acked
and whether MPTCP "upgrade" succeeded on a TCP socket.

- Add intra-node communication shortcut to improve SMC performance.

- Add IPv6 (and IPv{4,6}-over-IPv{4,6}) support to the GTP protocol
driver.

- Add HSR-SAN (RedBOX) mode of operation to the HSR protocol driver.

- Add reset reasons for tracing what caused a TCP reset to be sent.

- Introduce direction attribute for xfrm (IPSec) states. State can be
used either for input or output packet processing.

Things we sprinkled into general kernel code:

- Add bitmap_{read,write}(), bitmap_size(), expose BYTES_TO_BITS().

This required touch-ups and renaming of a few existing users.

- Add Endian-dependent __counted_by_{le,be} annotations.

- Make building selftests "quieter" by printing summaries like
"CC object.o" rather than full commands with all the arguments.

Netfilter:

- Use GFP_KERNEL to clone elements, to deal better with OOM
situations and avoid failures in the .commit step.

BPF:

- Add eBPF JIT for ARCv2 CPUs.

- Support attaching kprobe BPF programs through kprobe_multi link in
a session mode, meaning, a BPF program is attached to both function
entry and return, the entry program can decide if the return
program gets executed and the entry program can share u64 cookie
value with return program. "Session mode" is a common use-case for
tetragon and bpftrace.

- Add the ability to specify and retrieve BPF cookie for raw
tracepoint programs in order to ease migration from classic to raw
tracepoints.

- Add an internal-only BPF per-CPU instruction for resolving per-CPU
memory addresses and implement support in x86, ARM64 and RISC-V
JITs. This allows inlining functions which need to access per-CPU
state.

- Optimize x86 BPF JIT's emit_mov_imm64, and add support for various
atomics in bpf_arena which can be JITed as a single x86
instruction. Support BPF arena on ARM64.

- Add a new bpf_wq API for deferring events and refactor
process-context bpf_timer code to keep common code where possible.

- Harden the BPF verifier's and/or/xor value tracking.

- Introduce crypto kfuncs to let BPF programs call kernel crypto
APIs.

- Support bpf_tail_call_static() helper for BPF programs with GCC 13.

- Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF
program to have code sections where preemption is disabled.

Driver API:

- Skip software TC processing completely if all installed rules are
marked as HW-only, instead of checking the HW-only flag rule by
rule.

- Add support for configuring PoE (Power over Ethernet), similar to
the already existing support for PoDL (Power over Data Line)
config.

- Initial bits of a queue control API, for now allowing a single
queue to be reset without disturbing packet flow to other queues.

- Common (ethtool) statistics for hardware timestamping.

Tests and tooling:

- Remove the need to create a config file to run the net forwarding
tests so that a naive "make run_tests" can exercise them.

- Define a method of writing tests which require an external endpoint
to communicate with (to send/receive data towards the test
machine). Add a few such tests.

- Create a shared code library for writing Python tests. Expose the
YAML Netlink library from tools/ to the tests for easy Netlink
access.

- Move netfilter tests under net/, extend them, separate performance
tests from correctness tests, and iron out issues found by running
them "on every commit".

- Refactor BPF selftests to use common network helpers.

- Further work filling in YAML definitions of Netlink messages for:
nftables, team driver, bonding interfaces, vlan interfaces, VF
info, TC u32 mark, TC police action.

- Teach Python YAML Netlink to decode attribute policies.

- Extend the definition of the "indexed array" construct in the specs
to cover arrays of scalars rather than just nests.

- Add hyperlinks between definitions in generated Netlink docs.

Drivers:

- Make sure unsupported flower control flags are rejected by drivers,
and make more drivers report errors directly to the application
rather than dmesg (large number of driver changes from Asbjørn
Sloth Tønnesen).

- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support multiple RSS contexts and steering traffic to them
- support XDP metadata
- make page pool allocations more NUMA aware
- Intel (100G, ice, idpf):
- extract datapath code common among Intel drivers into a library
- use fewer resources in switchdev by sharing queues with the PF
- add PFCP filter support
- add Ethernet filter support
- use a spinlock instead of HW lock in PTP clock ops
- support 5 layer Tx scheduler topology
- nVidia/Mellanox:
- 800G link modes and 100G SerDes speeds
- per-queue IRQ coalescing configuration
- Marvell Octeon:
- support offloading TC packet mark action

- Ethernet NICs consumer, embedded and virtual:
- stop lying about skb->truesize in USB Ethernet drivers, it
messes up TCP memory calculations
- Google cloud vNIC:
- support changing ring size via ethtool
- support ring reset using the queue control API
- VirtIO net:
- expose flow hash from RSS to XDP
- per-queue statistics
- add selftests
- Synopsys (stmmac):
- support controllers which require an RX clock signal from the
MII bus to perform their hardware initialization
- TI:
- icssg_prueth: support ICSSG-based Ethernet on AM65x SR1.0 devices
- icssg_prueth: add SW TX / RX Coalescing based on hrtimers
- cpsw: minimal XDP support
- Renesas (ravb):
- support describing the MDIO bus
- Realtek (r8169):
- add support for RTL8168M
- Microchip Sparx5:
- matchall and flower actions mirred and redirect

- Ethernet switches:
- nVidia/Mellanox:
- improve events processing performance
- Marvell:
- add support for MV88E6250 family internal PHYs
- Microchip:
- add DCB and DSCP mapping support for KSZ switches
- vsc73xx: convert to PHYLINK
- Realtek:
- rtl8226b/rtl8221b: add C45 instances and SerDes switching

- Many driver changes related to PHYLIB and PHYLINK deprecated API
cleanup

- Ethernet PHYs:
- Add a new driver for Airoha EN8811H 2.5 Gigabit PHY.
- micrel: lan8814: add support for PPS out and external timestamp trigger

- WiFi:
- Disable Wireless Extensions (WEXT) in all Wi-Fi 7 devices
drivers. Modern devices can only be configured using nl80211.
- mac80211/cfg80211
- handle color change per link for WiFi 7 Multi-Link Operation
- Intel (iwlwifi):
- don't support puncturing in 5 GHz
- support monitor mode on passive channels
- BZ-W device support
- P2P with HE/EHT support
- re-add support for firmware API 90
- provide channel survey information for Automatic Channel Selection
- MediaTek (mt76):
- mt7921 LED control
- mt7925 EHT radiotap support
- mt7920e PCI support
- Qualcomm (ath11k):
- P2P support for QCA6390, WCN6855 and QCA2066
- support hibernation
- ieee80211-freq-limit Device Tree property support
- Qualcomm (ath12k):
- refactoring in preparation of multi-link support
- suspend and hibernation support
- ACPI support
- debugfs support, including dfs_simulate_radar support
- RealTek:
- rtw88: RTL8723CS SDIO device support
- rtw89: RTL8922AE Wi-Fi 7 PCI device support
- rtw89: complete features of new WiFi 7 chip 8922AE including
BT-coexistence and Wake-on-WLAN
- rtw89: use BIOS ACPI settings to set TX power and channels
- rtl8xxxu: enable Management Frame Protection (MFP) support

- Bluetooth:
- support for Intel BlazarI and Filmore Peak2 (BE201)
- support for MediaTek MT7921S SDIO
- initial support for Intel PCIe BT driver
- remove HCI_AMP support"

* tag 'net-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1827 commits)
selftests: netfilter: fix packetdrill conntrack testcase
net: gro: fix napi_gro_cb zeroed alignment
Bluetooth: btintel_pcie: Refactor and code cleanup
Bluetooth: btintel_pcie: Fix warning reported by sparse
Bluetooth: hci_core: Fix not handling hdev->le_num_of_adv_sets=1
Bluetooth: btintel: Fix compiler warning for multi_v7_defconfig config
Bluetooth: btintel_pcie: Fix compiler warnings
Bluetooth: btintel_pcie: Add *setup* function to download firmware
Bluetooth: btintel_pcie: Add support for PCIe transport
Bluetooth: btintel: Export few static functions
Bluetooth: HCI: Remove HCI_AMP support
Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init()
Bluetooth: qca: Fix error code in qca_read_fw_build_info()
Bluetooth: hci_conn: Use __counted_by() and avoid -Wfamnae warning
Bluetooth: btintel: Add support for Filmore Peak2 (BE201)
Bluetooth: btintel: Add support for BlazarI
LE Create Connection command timeout increased to 20 secs
dt-bindings: net: bluetooth: Add MediaTek MT7921S SDIO Bluetooth
Bluetooth: compute LE flow credits based on recvbuf space
Bluetooth: hci_sync: Use cmd->num_cis instead of magic number
...

of: property: Add fw_devlink support for interrupt-map property

2024-05-13T14:57:35+00:00

Some of the PCI host controllers (such as generic PCI host controller)
use "interrupt-map" DT property to describe the mapping between PCI
endpoints and PCI interrupt pins. This is the only case where the
interrupts are not described in DT.

Currently, there is no fw_devlink created based on "interrupt-map"
DT property so interrupt controller is not guaranteed to be probed
before the PCI host controller. This affects every platform where
both PCI host controller and interrupt controllers are probed as
regular platform devices.

This creates fw_devlink between consumers (PCI host controller) and
supplier (interrupt controller) based on "interrupt-map" DT property.

Signed-off-by: Anup Patel 
Reviewed-by: Saravana Kannan 
Link: https://lore.kernel.org/r/20240509120820.1430587-1-apatel@ventanamicro.com
Signed-off-by: Rob Herring (Arm)

i2c: mux: Remove class argument from i2c_mux_add_adapter()

2024-05-13T14:13:19+00:00

99a741aa7a2d ("i2c: mux: gpio: remove support for class-based device
instantiation") removed the last call to i2c_mux_add_adapter() with a
non-null class argument. Therefore the class argument can be removed.

Note: Class-based device instantiation is a legacy mechanism which
shouldn't be used in new code, so we can rule out that this argument
may be needed again in the future.

Signed-off-by: Heiner Kallweit 
Reviewed-by: Thomas Zimmermann 
Acked-by: Peter Rosin 
Reviewed-by: Laurent Pinchart 
Acked-by: Jonathan Cameron 
Acked-by: Rob Herring (Arm) 
Signed-off-by: Wolfram Sang