linux-stable.git/drivers/of/fdt.c, branch linux-3.4.y

of: fdt: fix memory initialization for expanded DT

2013-08-29T16:50:12+00:00

commit 9e40127526e857fa3f29d51e83277204fbdfc6ba upstream.

Already existing property flags are filled wrong for properties created from
initial FDT. This could cause problems if this DYNAMIC device-tree functions
are used later, i.e. properties are attached/detached/replaced. Simply dumping
flags from the running system show, that some initial static (not allocated via
kzmalloc()) nodes are marked as dynamic.

I putted some debug extensions to property_proc_show(..) :
..
+       if (OF_IS_DYNAMIC(pp))
+               pr_err("DEBUG: xxx : OF_IS_DYNAMIC\n");
+       if (OF_IS_DETACHED(pp))
+               pr_err("DEBUG: xxx : OF_IS_DETACHED\n");

when you operate on the nodes (e.g.: ~$ cat /proc/device-tree/*some_node*) you
will see that those flags are filled wrong, basically in most cases it will dump
a DYNAMIC or DETACHED status, which is in not true.
(BTW. this OF_IS_DETACHED is a own define for debug purposes which which just
make a test_bit(OF_DETACHED, &x->_flags)

If nodes are dynamic kernel is allowed to kfree() them. But it will crash
attempting to do so on the nodes from FDT -- they are not allocated via
kzmalloc().

Signed-off-by: Wladislav Wiebe 
Acked-by: Alexander Sverdlin 
Signed-off-by: Rob Herring 
Signed-off-by: Greg Kroah-Hartman

of/fdt.c: asm/setup.h included twice

2012-02-27T16:09:25+00:00

drivers/of/fdt.c included 'asm/setup.h' twice, remove the duplicate.

Signed-off-by: Danny Kukawka 
Signed-off-by: Rob Herring

of: add include asm/setup.h in drivers/of/fdt.c

2012-01-10T02:29:41+00:00

In the file drivers/of/fdt.c, it uses the COMMAND_LINE_SIZE which is stated
in asm/setup.h, so asm/setup.h should be included in drivers/of/fdt.c.

Signed-off-by: Yu Yue 
Signed-off-by: Guan Xuetao 

Cc: Grant Likerly 
Cc: devicetree-discuss@lists.ozlabs.org
Cc: Arnd Bergmann

ARM: prom.h: Fix build error by removing unneeded header file

2012-01-05T06:47:52+00:00

Fix the following build error:

  CC [M]  fs/udf/balloc.o
In file included from /home/fabio/next/linux-next/arch/arm/include/asm/prom.h:16,
                 from include/linux/of.h:140,
                 from include/asm-generic/gpio.h:7,
                 from arch/arm/plat-mxc/include/mach/irqs.h:14,
                 from /home/fabio/next/linux-next/arch/arm/include/asm/irq.h:4,
                 from /home/fabio/next/linux-next/arch/arm/include/asm/hardirq.h:6,
                 from include/linux/hardirq.h:7,
                 from include/linux/highmem.h:8,
                 from include/linux/pagemap.h:10,
                 from include/linux/buffer_head.h:13,
                 from fs/udf/udfdecl.h:11,
                 from fs/udf/balloc.c:22:
/home/fabio/next/linux-next/arch/arm/include/asm/setup.h:146: error: redefinition of 'struct tag'

Signed-off-by: Fabio Estevam 
[grant.likely: fix build failure on drivers/of/fdt.c]
Signed-off-by: Grant Likely

ARM/of: allow *machine_desc.dt_compat to be const

2011-12-27T16:57:13+00:00

This allows dt_compat to point to a constant list of compatible strings.

Signed-off-by: Uwe Kleine-König 
Signed-off-by: Rob Herring

Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

2011-11-07T01:12:03+00:00

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (106 commits)
  powerpc/p3060qds: Add support for P3060QDS board
  powerpc/83xx: Add shutdown request support to MCU handling on MPC8349 MITX
  powerpc/85xx: Make kexec to interate over online cpus
  powerpc/fsl_booke: Fix comment in head_fsl_booke.S
  powerpc/85xx: issue 15 EOI after core reset for FSL CoreNet devices
  powerpc/8xxx: Fix interrupt handling in MPC8xxx GPIO driver
  powerpc/85xx: Add 'fsl,pq3-gpio' compatiable for GPIO driver
  powerpc/86xx: Correct Gianfar support for GE boards
  powerpc/cpm: Clear muram before it is in use.
  drivers/virt: add ioctl for 32-bit compat on 64-bit to fsl-hv-manager
  powerpc/fsl_msi: add support for "msi-address-64" property
  powerpc/85xx: Setup secondary cores PIR with hard SMP id
  powerpc/fsl-booke: Fix settlbcam for 64-bit
  powerpc/85xx: Adding DCSR node to dtsi device trees
  powerpc/85xx: clean up FPGA device tree nodes for Freecsale QorIQ boards
  powerpc/85xx: fix PHYS_64BIT selection for P1022DS
  powerpc/fsl-booke: Fix setup_initial_memory_limit to not blindly map
  powerpc: respect mem= setting for early memory limit setup
  powerpc: Update corenet64_smp_defconfig
  powerpc: Update mpc85xx/corenet 32-bit defconfigs
  ...

Fix up trivial conflicts in:
 - arch/powerpc/configs/40x/hcu4_defconfig
	removed stale file, edited elsewhere
 - arch/powerpc/include/asm/udbg.h, arch/powerpc/kernel/udbg.c:
	added opal and gelic drivers vs added ePAPR driver
 - drivers/tty/serial/8250.c
	moved UPIO_TSI to powerpc vs removed UPIO_DWAPB support

dt: add of_alias_scan and of_alias_get_id

2011-09-22T17:12:10+00:00

The patch adds function of_alias_scan to populate a global lookup
table with the properties of 'aliases' node and function
of_alias_get_id for drivers to find alias id from the lookup table.

v3: Split out automatic addition of aliases on id lookup so that it can be
    debated separately from the core functionality.
v2: - Add of_chosen/of_aliases populating and of_alias_scan() invocation
    for OF_PROMTREE.
    - Add locking
    - rework parse loop

Signed-off-by: Shawn Guo 
Acked-by: David S. Miller 
Signed-off-by: Grant Likely

of: Change logic to overwrite cmd_line with CONFIG_CMDLINE

2011-09-20T06:09:34+00:00

We used to overwrite with CONFIG_CMDLINE if we found a chosen
node but failed to get bootargs out of it or they were empty,
unless CONFIG_CMDLINE_FORCE is set.

Instead change that to overwrite if "data" is non empty after
the bootargs check. It allows arch code to have other mechanisms
to retrieve the command line prior to parsing the device-tree.

Note: CONFIG_CMDLINE_FORCE case should ideally be handled elsewhere
as it won't work as it-is if the device-tree has no /chosen node

Signed-off-by: Benjamin Herrenschmidt 
CC: devicetree-discuss@lists-ozlabs.org
CC: Grant Likely 
Acked-by: Grant Likely

Revert "dt: add of_alias_scan and of_alias_get_id"

2011-08-04T10:26:24+00:00

This reverts commit 750f463a749e28464151ad26938d11b07b1c43cb.

of_alias_* still needs work to be generalized for 'promtree' dt
platforms, and to no implicitly create entries for available ids.

Signed-off-by: Grant Likely

dt: add of_alias_scan and of_alias_get_id

2011-08-03T12:02:31+00:00

The patch adds function of_alias_scan to populate a global lookup
table with the properties of 'aliases' node and function
of_alias_get_id for drivers to find alias id from the lookup table.

Signed-off-by: Shawn Guo 
[grant.likely: add locking and rework parse loop]
Signed-off-by: Grant Likely