Pull block fixes from Jens Axboe:
 "A single NVMe pull request via Christoph with a few fixes that should
  go into the 6.0 release:

   - Fix IOC_PR_CLEAR and IOC_PR_RELEASE ioctls for nvme devices
     (Michael Kelley)

   - Disable Write Zeroes on Phison E3C/E4C (Tina Hsu)"

* tag 'block-6.0-2022-09-29' of git://git.kernel.dk/linux:
  nvme-pci: disable Write Zeroes on Phison E3C/E4C
  nvme: Fix IOC_PR_CLEAR and IOC_PR_RELEASE ioctls for nvme devices

E3C/E4C SSDs do support the Write Zeroes command in theory, but have very
bad performance when using it.  As the firmware has been frozen for these
products we can not expect firmware improvements for it, so disable
Write Zeroes.

Signed-off-by: Tina Hsu <tina_hsu@phison.corp-partner.google.com>
[hch: update the commit message]
Signed-off-by: Christoph Hellwig <hch@lst.de>

The IOC_PR_CLEAR and IOC_PR_RELEASE ioctls are
non-functional on NVMe devices because the nvme_pr_clear()
and nvme_pr_release() functions set the IEKEY field incorrectly.
The IEKEY field should be set only when the key is zero (i.e,
not specified).  The current code does it backwards.

Furthermore, the NVMe spec describes the persistent
reservation "clear" function as an option on the reservation
release command. The current implementation of nvme_pr_clear()
erroneously uses the reservation register command.

Fix these errors. Note that NVMe version 1.3 and later specify
that setting the IEKEY field will return an error of Invalid
Field in Command.  The fix will set IEKEY when the key is zero,
which is appropriate as these ioctls consider a zero key to
be "unspecified", and the intention of the spec change is
to require a valid key.

Tested on a version 1.4 PCI NVMe device in an Azure VM.

Fixes: 1673f1f08c88 ("nvme: move block_device_operations and ns/ctrl freeing to common code")
Fixes: 1d277a637a71 ("NVMe: Add persistent reservation ops")
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Pull block fixes from Jens Axboe:

 - NVMe pull via Christoph:
      - fix a use after free in nvmet (Bart Van Assche)
      - fix a use after free when detecting digest errors
        (Sagi Grimberg)
      - fix regression that causes sporadic TCP requests to time out
        (Sagi Grimberg)
      - fix two off by ones errors in the nvmet ZNS support
        (Dennis Maisenbacher)
      - requeue aen after firmware activation (Keith Busch)

 - Fix missing request flags in debugfs code (me)

 - Partition scan fix (Ming)

* tag 'block-6.0-2022-09-09' of git://git.kernel.dk/linux-block:
  block: add missing request flags to debugfs code
  nvme: requeue aen after firmware activation
  nvmet: fix mar and mor off-by-one errors
  nvme-tcp: fix regression that causes sporadic requests to time out
  nvme-tcp: fix UAF when detecting digest errors
  nvmet: fix a use-after-free
  block: don't add partitions if GD_SUPPRESS_PART_SCAN is set

The driver prevents async event work while handling a processing paused
event, but someone needs to restart it after the controller returns to a
live state.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=216400
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Maximum Active Resources (MAR) and Maximum Open Resources (MOR) are 0's
based vales where a value of 0xffffffff indicates that there is no limit.

Decrement the values that are returned by bdev_max_open_zones and
bdev_max_active_zones as the block layer helpers are not 0's based.
A 0 returned by the block layer helpers indicates no limit, thus convert
it to 0xffffffff (U32_MAX).

Fixes: aaf2e048af27 ("nvmet: add ZBD over ZNS backend support")
Suggested-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

When we queue requests, we strive to batch as much as possible and also
signal the network stack that more data is about to be sent over a socket
with MSG_SENDPAGE_NOTLAST. This flag looks at the pending requests queued
as well as queue->more_requests that is derived from the block layer
last-in-batch indication.

We set more_request=true when we flush the request directly from
.queue_rq submission context (in nvme_tcp_send_all), however this is
wrongly assuming that no other requests may be queued during the
execution of nvme_tcp_send_all.

Due to this, a race condition may happen where:

 1. request X is queued as !last-in-batch
 2. request X submission context calls nvme_tcp_send_all directly
 3. nvme_tcp_send_all is preempted and schedules to a different cpu
 4. request Y is queued as last-in-batch
 5. nvme_tcp_send_all context sends request X+Y, however signals for
    both MSG_SENDPAGE_NOTLAST because queue->more_requests=true.

==> none of the requests is pushed down to the wire as the network
stack is waiting for more data, both requests timeout.

To fix this, we eliminate queue->more_requests and only rely on
the queue req_list and send_list to be not-empty.

Fixes: 122e5b9f3d37 ("nvme-tcp: optimize network stack with setting msg flags according to batch size")
Reported-by: Jonathan Nicklin <jnicklin@blockbridge.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Tested-by: Jonathan Nicklin <jnicklin@blockbridge.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

We should also bail from the io_work loop when we set rd_enabled to true,
so we don't attempt to read data from the socket when the TCP stream is
already out-of-sync or corrupted.

Fixes: 3f2304f8c6d6 ("nvme-tcp: add NVMe over TCP host driver")
Reported-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Fix the following use-after-free complaint triggered by blktests nvme/004:

BUG: KASAN: user-memory-access in blk_mq_complete_request_remote+0xac/0x350
Read of size 4 at addr 0000607bd1835943 by task kworker/13:1/460
Workqueue: nvmet-wq nvme_loop_execute_work [nvme_loop]
Call Trace:
 show_stack+0x52/0x58
 dump_stack_lvl+0x49/0x5e
 print_report.cold+0x36/0x1e2
 kasan_report+0xb9/0xf0
 __asan_load4+0x6b/0x80
 blk_mq_complete_request_remote+0xac/0x350
 nvme_loop_queue_response+0x1df/0x275 [nvme_loop]
 __nvmet_req_complete+0x132/0x4f0 [nvmet]
 nvmet_req_complete+0x15/0x40 [nvmet]
 nvmet_execute_io_connect+0x18a/0x1f0 [nvmet]
 nvme_loop_execute_work+0x20/0x30 [nvme_loop]
 process_one_work+0x56e/0xa70
 worker_thread+0x2d1/0x640
 kthread+0x183/0x1c0
 ret_from_fork+0x1f/0x30

Cc: stable@vger.kernel.org
Fixes: a07b4970f464 ("nvmet: add a generic NVMe target")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Pull block fixes from Jens Axboe:

 - NVMe pull request via Christoph:
     - error handling fix for the new auth code (Hannes Reinecke)
     - fix unhandled tcp states in nvmet_tcp_state_change (Maurizio
       Lombardi)
     - add NVME_QUIRK_BOGUS_NID for Lexar NM610 (Shyamin Ayesh)

 - Add documentation for the ublk driver merged in this merge window
   (Ming)

* tag 'block-6.0-2022-09-02' of git://git.kernel.dk/linux-block:
  Documentation: document ublk
  nvmet-tcp: fix unhandled tcp states in nvmet_tcp_state_change()
  nvmet-auth: add missing goto in nvmet_setup_auth()
  nvme-pci: add NVME_QUIRK_BOGUS_NID for Lexar NM610