linux-stable.git/drivers/nvme, branch v5.8.4

nvme: fix deadlock in disconnect during scan_work and/or ana_work

2020-08-21T11:15:11+00:00

[ Upstream commit ecca390e80561debbfdb4dc96bf94595136889fa ]

A deadlock happens in the following scenario with multipath:
1) scan_work(nvme0) detects a new nsid while nvme0
    is an optimized path to it, path nvme1 happens to be
    inaccessible.

2) Before scan_work is complete nvme0 disconnect is initiated
    nvme_delete_ctrl_sync() sets nvme0 state to NVME_CTRL_DELETING

3) scan_work(1) attempts to submit IO,
    but nvme_path_is_optimized() observes nvme0 is not LIVE.
    Since nvme1 is a possible path IO is requeued and scan_work hangs.

--
Workqueue: nvme-wq nvme_scan_work [nvme_core]
kernel: Call Trace:
kernel:  __schedule+0x2b9/0x6c0
kernel:  schedule+0x42/0xb0
kernel:  io_schedule+0x16/0x40
kernel:  do_read_cache_page+0x438/0x830
kernel:  read_cache_page+0x12/0x20
kernel:  read_dev_sector+0x27/0xc0
kernel:  read_lba+0xc1/0x220
kernel:  efi_partition+0x1e6/0x708
kernel:  check_partition+0x154/0x244
kernel:  rescan_partitions+0xae/0x280
kernel:  __blkdev_get+0x40f/0x560
kernel:  blkdev_get+0x3d/0x140
kernel:  __device_add_disk+0x388/0x480
kernel:  device_add_disk+0x13/0x20
kernel:  nvme_mpath_set_live+0x119/0x140 [nvme_core]
kernel:  nvme_update_ns_ana_state+0x5c/0x60 [nvme_core]
kernel:  nvme_set_ns_ana_state+0x1e/0x30 [nvme_core]
kernel:  nvme_parse_ana_log+0xa1/0x180 [nvme_core]
kernel:  nvme_mpath_add_disk+0x47/0x90 [nvme_core]
kernel:  nvme_validate_ns+0x396/0x940 [nvme_core]
kernel:  nvme_scan_work+0x24f/0x380 [nvme_core]
kernel:  process_one_work+0x1db/0x380
kernel:  worker_thread+0x249/0x400
kernel:  kthread+0x104/0x140
--

4) Delete also hangs in flush_work(ctrl->scan_work)
    from nvme_remove_namespaces().

Similiarly a deadlock with ana_work may happen: if ana_work has started
and calls nvme_mpath_set_live and device_add_disk, it will
trigger I/O. When we trigger disconnect I/O will block because
our accessible (optimized) path is disconnecting, but the alternate
path is inaccessible, so I/O blocks. Then disconnect tries to flush
the ana_work and hangs.

[  605.550896] Workqueue: nvme-wq nvme_ana_work [nvme_core]
[  605.552087] Call Trace:
[  605.552683]  __schedule+0x2b9/0x6c0
[  605.553507]  schedule+0x42/0xb0
[  605.554201]  io_schedule+0x16/0x40
[  605.555012]  do_read_cache_page+0x438/0x830
[  605.556925]  read_cache_page+0x12/0x20
[  605.557757]  read_dev_sector+0x27/0xc0
[  605.558587]  amiga_partition+0x4d/0x4c5
[  605.561278]  check_partition+0x154/0x244
[  605.562138]  rescan_partitions+0xae/0x280
[  605.563076]  __blkdev_get+0x40f/0x560
[  605.563830]  blkdev_get+0x3d/0x140
[  605.564500]  __device_add_disk+0x388/0x480
[  605.565316]  device_add_disk+0x13/0x20
[  605.566070]  nvme_mpath_set_live+0x5e/0x130 [nvme_core]
[  605.567114]  nvme_update_ns_ana_state+0x2c/0x30 [nvme_core]
[  605.568197]  nvme_update_ana_state+0xca/0xe0 [nvme_core]
[  605.569360]  nvme_parse_ana_log+0xa1/0x180 [nvme_core]
[  605.571385]  nvme_read_ana_log+0x76/0x100 [nvme_core]
[  605.572376]  nvme_ana_work+0x15/0x20 [nvme_core]
[  605.573330]  process_one_work+0x1db/0x380
[  605.574144]  worker_thread+0x4d/0x400
[  605.574896]  kthread+0x104/0x140
[  605.577205]  ret_from_fork+0x35/0x40
[  605.577955] INFO: task nvme:14044 blocked for more than 120 seconds.
[  605.579239]       Tainted: G           OE     5.3.5-050305-generic #201910071830
[  605.580712] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  605.582320] nvme            D    0 14044  14043 0x00000000
[  605.583424] Call Trace:
[  605.583935]  __schedule+0x2b9/0x6c0
[  605.584625]  schedule+0x42/0xb0
[  605.585290]  schedule_timeout+0x203/0x2f0
[  605.588493]  wait_for_completion+0xb1/0x120
[  605.590066]  __flush_work+0x123/0x1d0
[  605.591758]  __cancel_work_timer+0x10e/0x190
[  605.593542]  cancel_work_sync+0x10/0x20
[  605.594347]  nvme_mpath_stop+0x2f/0x40 [nvme_core]
[  605.595328]  nvme_stop_ctrl+0x12/0x50 [nvme_core]
[  605.596262]  nvme_do_delete_ctrl+0x3f/0x90 [nvme_core]
[  605.597333]  nvme_sysfs_delete+0x5c/0x70 [nvme_core]
[  605.598320]  dev_attr_store+0x17/0x30

Fix this by introducing a new state: NVME_CTRL_DELETE_NOIO, which will
indicate the phase of controller deletion where I/O cannot be allowed
to access the namespace. NVME_CTRL_DELETING still allows mpath I/O to
be issued to the bottom device, and only after we flush the ana_work
and scan_work (after nvme_stop_ctrl and nvme_prep_remove_namespaces)
we change the state to NVME_CTRL_DELETING_NOIO. Also we prevent ana_work
from re-firing by aborting early if we are not LIVE, so we should be safe
here.

In addition, change the transport drivers to follow the updated state
machine.

Fixes: 0d0b660f214d ("nvme: add ANA support")
Reported-by: Anton Eidelman 
Signed-off-by: Sagi Grimberg 
Signed-off-by: Christoph Hellwig 
Signed-off-by: Sasha Levin

nvme-multipath: do not fall back to __nvme_find_path() for non-optimized paths

2020-08-19T06:26:14+00:00

[ Upstream commit fbd6a42d8932e172921c7de10468a2e12c34846b ]

When nvme_round_robin_path() finds a valid namespace we should be using it;
falling back to __nvme_find_path() for non-optimized paths will cause the
result from nvme_round_robin_path() to be ignored for non-optimized paths.

Fixes: 75c10e732724 ("nvme-multipath: round-robin I/O policy")
Signed-off-by: Martin Wilck 
Signed-off-by: Hannes Reinecke 
Reviewed-by: Sagi Grimberg 
Signed-off-by: Christoph Hellwig 
Signed-off-by: Sasha Levin

nvme-multipath: fix logic for non-optimized paths

2020-08-19T06:26:14+00:00

[ Upstream commit 3f6e3246db0e6f92e784965d9d0edb8abe6c6b74 ]

Handle the special case where we have exactly one optimized path,
which we should keep using in this case.

Fixes: 75c10e732724 ("nvme-multipath: round-robin I/O policy")
Signed off-by: Martin Wilck 
Signed-off-by: Hannes Reinecke 
Reviewed-by: Sagi Grimberg 
Signed-off-by: Christoph Hellwig 
Signed-off-by: Sasha Levin

nvme-rdma: fix controller reset hang during traffic

2020-08-19T06:26:13+00:00

[ Upstream commit 9f98772ba307dd89a3d17dc2589f213d3972fc64 ]

commit fe35ec58f0d3 ("block: update hctx map when use multiple maps")
exposed an issue where we may hang trying to wait for queue freeze
during I/O. We call blk_mq_update_nr_hw_queues which in case of multiple
queue maps (which we have now for default/read/poll) is attempting to
freeze the queue. However we never started queue freeze when starting the
reset, which means that we have inflight pending requests that entered the
queue that we will not complete once the queue is quiesced.

So start a freeze before we quiesce the queue, and unfreeze the queue
after we successfully connected the I/O queues (and make sure to call
blk_mq_update_nr_hw_queues only after we are sure that the queue was
already frozen).

This follows to how the pci driver handles resets.

Fixes: fe35ec58f0d3 ("block: update hctx map when use multiple maps")
Signed-off-by: Sagi Grimberg 
Signed-off-by: Christoph Hellwig 
Signed-off-by: Sasha Levin

nvme-tcp: fix controller reset hang during traffic

2020-08-19T06:26:13+00:00

[ Upstream commit 2875b0aecabe2f081a8432e2bc85b85df0529490 ]

commit fe35ec58f0d3 ("block: update hctx map when use multiple maps")
exposed an issue where we may hang trying to wait for queue freeze
during I/O. We call blk_mq_update_nr_hw_queues which in case of multiple
queue maps (which we have now for default/read/poll) is attempting to
freeze the queue. However we never started queue freeze when starting the
reset, which means that we have inflight pending requests that entered the
queue that we will not complete once the queue is quiesced.

So start a freeze before we quiesce the queue, and unfreeze the queue
after we successfully connected the I/O queues (and make sure to call
blk_mq_update_nr_hw_queues only after we are sure that the queue was
already frozen).

This follows to how the pci driver handles resets.

Fixes: fe35ec58f0d3 ("block: update hctx map when use multiple maps")
Signed-off-by: Sagi Grimberg 
Signed-off-by: Christoph Hellwig 
Signed-off-by: Sasha Levin

nvme: add a Identify Namespace Identification Descriptor list quirk

2020-07-29T06:05:44+00:00

Add a quirk for a device that does not support the Identify Namespace
Identification Descriptor list despite claiming 1.3 compliance.

Fixes: ea43d9709f72 ("nvme: fix identify error status silent ignore")
Reported-by: Ingo Brunberg 
Signed-off-by: Christoph Hellwig 
Tested-by: Ingo Brunberg 
Reviewed-by: Sagi Grimberg

nvme-pci: prevent SK hynix PC400 from using Write Zeroes command

2020-07-26T15:28:19+00:00

After commit 6e02318eaea5 ("nvme: add support for the Write Zeroes
command"), SK hynix PC400 becomes very slow with the following error
message:

[  224.567695] blk_update_request: operation not supported error, dev nvme1n1, sector 499384320 op 0x9:(WRITE_ZEROES) flags 0x1000000 phys_seg 0 prio class 0]

SK Hynix PC400 has a buggy firmware that treats NLB as max value instead
of a range, so the NLB passed isn't a valid value to the firmware.

According to SK hynix there are three commands are affected:
- Write Zeroes
- Compare
- Write Uncorrectable

Right now only Write Zeroes is implemented, so disable it completely on
SK hynix PC400.

BugLink: https://bugs.launchpad.net/bugs/1872383
Cc: kyounghwan sohn 
Signed-off-by: Kai-Heng Feng 
Signed-off-by: Christoph Hellwig

nvme-tcp: fix possible hang waiting for icresp response

2020-07-26T15:24:27+00:00

If the controller died exactly when we are receiving icresp
we hang because icresp may never return. Make sure to set a
high finite limit.

Fixes: 3f2304f8c6d6 ("nvme-tcp: add NVMe over TCP host driver")
Signed-off-by: Sagi Grimberg 
Signed-off-by: Christoph Hellwig

nvme: explicitly update mpath disk capacity on revalidation

2020-07-16T14:40:27+00:00

Commit 3b4b19721ec652 ("nvme: fix possible deadlock when I/O is
blocked") reverted multipath head disk revalidation due to deadlocks
caused by holding the bd_mutex during revalidate.

Updating the multipath disk blockdev size is still required though for
userspace to be able to observe any resizing while the device is
mounted. Directly update the bdev inode size to avoid unnecessarily
holding the bdev->bd_mutex.

Fixes: 3b4b19721ec652 ("nvme: fix possible deadlock when I/O is
blocked")

Signed-off-by: Anthony Iliopoulos 
Signed-off-by: Christoph Hellwig

nvme: fix a crash in nvme_mpath_add_disk

2020-07-02T08:38:00+00:00

For private namespaces ns->head_disk is NULL, so add a NULL check
before updating the BDI capabilities.

Fixes: b2ce4d90690b ("nvme-multipath: set bdi capabilities once")
Reported-by: Avinash M N 
Signed-off-by: Christoph Hellwig 
Reviewed-by: Sagi Grimberg 
Reviewed-by: Max Gurtovoy