linux-stable.git/drivers/nvme, branch v5.2.7

nvme: fix multipath crash when ANA is deactivated

2019-08-04T07:29:38+00:00

commit 66b20ac0a1a10769d059d6903202f53494e3d902 upstream.

Fix a crash with multipath activated. It happends when ANA log
page is larger than MDTS and because of that ANA is disabled.
The driver then tries to access unallocated buffer when connecting
to a nvme target. The signature is as follows:

[  300.433586] nvme nvme0: ANA log page size (8208) larger than MDTS (8192).
[  300.435387] nvme nvme0: disabling ANA support.
[  300.437835] nvme nvme0: creating 4 I/O queues.
[  300.459132] nvme nvme0: new ctrl: NQN "nqn.0.0.0", addr 10.91.0.1:8009
[  300.464609] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
[  300.466342] #PF error: [normal kernel read fault]
[  300.467385] PGD 0 P4D 0
[  300.467987] Oops: 0000 [#1] SMP PTI
[  300.468787] CPU: 3 PID: 50 Comm: kworker/u8:1 Not tainted 5.0.20kalray+ #4
[  300.470264] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
[  300.471532] Workqueue: nvme-wq nvme_scan_work [nvme_core]
[  300.472724] RIP: 0010:nvme_parse_ana_log+0x21/0x140 [nvme_core]
[  300.474038] Code: 45 01 d2 d8 48 98 c3 66 90 0f 1f 44 00 00 41 57 41 56 41 55 41 54 55 53 48 89 fb 48 83 ec 08 48 8b af 20 0a 00 00 48 89 34 24 <66> 83 7d 08 00 0f 84 c6 00 00 00 44 8b 7d 14 49 89 d5 8b 55 10 48
[  300.477374] RSP: 0018:ffffa50e80fd7cb8 EFLAGS: 00010296
[  300.478334] RAX: 0000000000000001 RBX: ffff9130f1872258 RCX: 0000000000000000
[  300.479784] RDX: ffffffffc06c4c30 RSI: ffff9130edad4280 RDI: ffff9130f1872258
[  300.481488] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000044
[  300.483203] R10: 0000000000000220 R11: 0000000000000040 R12: ffff9130f18722c0
[  300.484928] R13: ffff9130f18722d0 R14: ffff9130edad4280 R15: ffff9130f18722c0
[  300.486626] FS:  0000000000000000(0000) GS:ffff9130f7b80000(0000) knlGS:0000000000000000
[  300.488538] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  300.489907] CR2: 0000000000000008 CR3: 00000002365e6000 CR4: 00000000000006e0
[  300.491612] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  300.493303] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  300.494991] Call Trace:
[  300.495645]  nvme_mpath_add_disk+0x5c/0xb0 [nvme_core]
[  300.496880]  nvme_validate_ns+0x2ef/0x550 [nvme_core]
[  300.498105]  ? nvme_identify_ctrl.isra.45+0x6a/0xb0 [nvme_core]
[  300.499539]  nvme_scan_work+0x2b4/0x370 [nvme_core]
[  300.500717]  ? __switch_to_asm+0x35/0x70
[  300.501663]  process_one_work+0x171/0x380
[  300.502340]  worker_thread+0x49/0x3f0
[  300.503079]  kthread+0xf8/0x130
[  300.503795]  ? max_active_store+0x80/0x80
[  300.504690]  ? kthread_bind+0x10/0x10
[  300.505502]  ret_from_fork+0x35/0x40
[  300.506280] Modules linked in: nvme_tcp nvme_rdma rdma_cm iw_cm ib_cm ib_core nvme_fabrics nvme_core xt_physdev ip6table_raw ip6table_mangle ip6table_filter ip6_tables xt_comment iptable_nat nf_nat_ipv4 nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 xt_CHECKSUM iptable_mangle iptable_filter veth ebtable_filter ebtable_nat ebtables iptable_raw vxlan ip6_udp_tunnel udp_tunnel sunrpc joydev pcspkr virtio_balloon br_netfilter bridge stp llc ip_tables xfs libcrc32c ata_generic pata_acpi virtio_net virtio_console net_failover virtio_blk failover ata_piix serio_raw libata virtio_pci virtio_ring virtio
[  300.514984] CR2: 0000000000000008
[  300.515569] ---[ end trace faa2eefad7e7f218 ]---
[  300.516354] RIP: 0010:nvme_parse_ana_log+0x21/0x140 [nvme_core]
[  300.517330] Code: 45 01 d2 d8 48 98 c3 66 90 0f 1f 44 00 00 41 57 41 56 41 55 41 54 55 53 48 89 fb 48 83 ec 08 48 8b af 20 0a 00 00 48 89 34 24 <66> 83 7d 08 00 0f 84 c6 00 00 00 44 8b 7d 14 49 89 d5 8b 55 10 48
[  300.520353] RSP: 0018:ffffa50e80fd7cb8 EFLAGS: 00010296
[  300.521229] RAX: 0000000000000001 RBX: ffff9130f1872258 RCX: 0000000000000000
[  300.522399] RDX: ffffffffc06c4c30 RSI: ffff9130edad4280 RDI: ffff9130f1872258
[  300.523560] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000044
[  300.524734] R10: 0000000000000220 R11: 0000000000000040 R12: ffff9130f18722c0
[  300.525915] R13: ffff9130f18722d0 R14: ffff9130edad4280 R15: ffff9130f18722c0
[  300.527084] FS:  0000000000000000(0000) GS:ffff9130f7b80000(0000) knlGS:0000000000000000
[  300.528396] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  300.529440] CR2: 0000000000000008 CR3: 00000002365e6000 CR4: 00000000000006e0
[  300.530739] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  300.531989] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  300.533264] Kernel panic - not syncing: Fatal exception
[  300.534338] Kernel Offset: 0x17c00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
[  300.536227] ---[ end Kernel panic - not syncing: Fatal exception ]---

Condition check refactoring from Christoph Hellwig.

Signed-off-by: Marta Rybczynska 
Tested-by: Jean-Baptiste Riaux 
Signed-off-by: Christoph Hellwig 
Signed-off-by: Greg Kroah-Hartman

nvme: fix NULL deref for fabrics options

2019-07-31T05:24:53+00:00

[ Upstream commit 7d30c81b80ea9b0812d27030a46a5bf4c4e328f5 ]

git://git.infradead.org/nvme.git nvme-5.3 branch now causes the
following NULL deref oops.  Check the ctrl->opts first before the deref.

[   16.337581] BUG: kernel NULL pointer dereference, address: 0000000000000056
[   16.338551] #PF: supervisor read access in kernel mode
[   16.338551] #PF: error_code(0x0000) - not-present page
[   16.338551] PGD 0 P4D 0
[   16.338551] Oops: 0000 [#1] SMP PTI
[   16.338551] CPU: 2 PID: 1035 Comm: kworker/u16:5 Not tainted 5.2.0-rc6+ #1
[   16.338551] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626ccb91-prebuilt.qemu-project.org 04/01/2014
[   16.338551] Workqueue: nvme-wq nvme_scan_work [nvme_core]
[   16.338551] RIP: 0010:nvme_validate_ns+0xc9/0x7e0 [nvme_core]
[   16.338551] Code: c0 49 89 c5 0f 84 00 07 00 00 48 8b 7b 58 e8 be 48 39 c1 48 3d 00 f0 ff ff 49 89 45 18 0f 87 a4 06 00 00 48 8b 93 70 0a 00 00 <80> 7a 56 00 74 0c 48 8b 40 68 83 48 3c 08 49 8b 45 18 48 89 c6 bf
[   16.338551] RSP: 0018:ffffc900024c7d10 EFLAGS: 00010283
[   16.338551] RAX: ffff888135a30720 RBX: ffff88813a4fd1f8 RCX: 0000000000000007
[   16.338551] RDX: 0000000000000000 RSI: ffffffff8256dd38 RDI: ffff888135a30720
[   16.338551] RBP: 0000000000000001 R08: 0000000000000007 R09: ffff88813aa6a840
[   16.338551] R10: 0000000000000001 R11: 000000000002d060 R12: ffff88813a4fd1f8
[   16.338551] R13: ffff88813a77f800 R14: ffff88813aa35180 R15: 0000000000000001
[   16.338551] FS:  0000000000000000(0000) GS:ffff88813ba80000(0000) knlGS:0000000000000000
[   16.338551] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   16.338551] CR2: 0000000000000056 CR3: 000000000240a002 CR4: 0000000000360ee0
[   16.338551] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   16.338551] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   16.338551] Call Trace:
[   16.338551]  nvme_scan_work+0x2c0/0x340 [nvme_core]
[   16.338551]  ? __switch_to_asm+0x40/0x70
[   16.338551]  ? _raw_spin_unlock_irqrestore+0x18/0x30
[   16.338551]  ? try_to_wake_up+0x408/0x450
[   16.338551]  process_one_work+0x20b/0x3e0
[   16.338551]  worker_thread+0x1f9/0x3d0
[   16.338551]  ? cancel_delayed_work+0xa0/0xa0
[   16.338551]  kthread+0x117/0x120
[   16.338551]  ? kthread_stop+0xf0/0xf0
[   16.338551]  ret_from_fork+0x3a/0x50
[   16.338551] Modules linked in: nvme nvme_core
[   16.338551] CR2: 0000000000000056
[   16.338551] ---[ end trace b9bf761a93e62d84 ]---
[   16.338551] RIP: 0010:nvme_validate_ns+0xc9/0x7e0 [nvme_core]
[   16.338551] Code: c0 49 89 c5 0f 84 00 07 00 00 48 8b 7b 58 e8 be 48 39 c1 48 3d 00 f0 ff ff 49 89 45 18 0f 87 a4 06 00 00 48 8b 93 70 0a 00 00 <80> 7a 56 00 74 0c 48 8b 40 68 83 48 3c 08 49 8b 45 18 48 89 c6 bf
[   16.338551] RSP: 0018:ffffc900024c7d10 EFLAGS: 00010283
[   16.338551] RAX: ffff888135a30720 RBX: ffff88813a4fd1f8 RCX: 0000000000000007
[   16.338551] RDX: 0000000000000000 RSI: ffffffff8256dd38 RDI: ffff888135a30720
[   16.338551] RBP: 0000000000000001 R08: 0000000000000007 R09: ffff88813aa6a840
[   16.338551] R10: 0000000000000001 R11: 000000000002d060 R12: ffff88813a4fd1f8
[   16.338551] R13: ffff88813a77f800 R14: ffff88813aa35180 R15: 0000000000000001
[   16.338551] FS:  0000000000000000(0000) GS:ffff88813ba80000(0000) knlGS:0000000000000000
[   16.338551] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   16.338551] CR2: 0000000000000056 CR3: 000000000240a002 CR4: 0000000000360ee0
[   16.338551] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   16.338551] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400

Fixes: 958f2a0f8121 ("nvme-tcp: set the STABLE_WRITES flag when data digests are enabled")
Cc: Christoph Hellwig 
Cc: Keith Busch 
Reviewed-by: Sagi Grimberg 
Signed-off-by: Minwoo Im 
Signed-off-by: Jens Axboe 
Signed-off-by: Sasha Levin

nvme-tcp: set the STABLE_WRITES flag when data digests are enabled

2019-07-31T05:24:51+00:00

[ Upstream commit 958f2a0f8121ae36a5cbff383ab94fadf1fba5eb ]

There was a few false alarms sighted on target side about wrong data
digest while performing high throughput load to XFS filesystem shared
through NVMoF TCP.

This flag tells the rest of the kernel to ensure that the data buffer
does not change while the write is in flight.  It incurs a performance
penalty, so only enable it when it is actually needed, i.e. when we are
calculating data digests.

Although even with this change in place, ext2 users can steel experience
false positives, as ext2 is not respecting this flag. This may be apply
to vfat as well.

Signed-off-by: Mikhail Skorzhinskii 
Signed-off-by: Mike Playle 
Reviewed-by: Sagi Grimberg 
Signed-off-by: Christoph Hellwig 
Signed-off-by: Sasha Levin

nvme-tcp: don't use sendpage for SLAB pages

2019-07-31T05:24:51+00:00

[ Upstream commit 37c15219599f7a4baa73f6e3432afc69ba7cc530 ]

According to commit a10674bf2406 ("tcp: detecting the misuse of
.sendpage for Slab objects") and previous discussion, tcp_sendpage
should not be used for pages that is managed by SLAB, as SLAB is not
taking page reference counters into consideration.

Signed-off-by: Mikhail Skorzhinskii 
Reviewed-by: Sagi Grimberg 
Signed-off-by: Christoph Hellwig 
Signed-off-by: Sasha Levin

nvme-pci: limit max_hw_sectors based on the DMA max mapping size

2019-07-31T05:24:51+00:00

[ Upstream commit 7637de311bd2124b298a072852448b940d8a34b9 ]

When running a NVMe device that is attached to a addressing
challenged PCIe root port that requires bounce buffering, our
request sizes can easily overflow the swiotlb bounce buffer
size.  Limit the maximum I/O size to the limit exposed by
the DMA mapping subsystem.

Signed-off-by: Christoph Hellwig 
Reported-by: Atish Patra 
Tested-by: Atish Patra 
Reviewed-by: Sagi Grimberg 
Signed-off-by: Sasha Levin

nvme-pci: check for NULL return from pci_alloc_p2pmem()

2019-07-31T05:24:51+00:00

[ Upstream commit bfac8e9f55cf62a000b643a0081488badbe92d96 ]

Modify nvme_alloc_sq_cmds() to call pci_free_p2pmem() to free the memory
it allocated using pci_alloc_p2pmem() in case pci_p2pmem_virt_to_bus()
returns null.

Makes sure not to call pci_free_p2pmem() if pci_alloc_p2pmem() returned
NULL, which can happen if CONFIG_PCI_P2PDMA is not configured.

The current implementation is not expected to leak since
pci_p2pmem_virt_to_bus() is expected to fail only if pci_alloc_p2pmem()
returns null. However, checking the return value of pci_alloc_p2pmem()
is more explicit.

Signed-off-by: Alan Mikhak 
Signed-off-by: Christoph Hellwig 
Signed-off-by: Sasha Levin

nvme-pci: adjust irq max_vector using num_possible_cpus()

2019-07-26T07:10:32+00:00

[ Upstream commit dad77d63903e91a2e97a0c984cabe5d36e91ba60 ]

If the "irq_queues" are greater than num_possible_cpus(),
nvme_calc_irq_sets() can have irq set_size for HCTX_TYPE_DEFAULT greater
than it can be afforded.
2039         affd->set_size[HCTX_TYPE_DEFAULT] = nrirqs - nr_read_queues;

It might cause a WARN() from the irq_build_affinity_masks() like [1]:
220         if (nr_present < numvecs)
221                 WARN_ON(nr_present + nr_others < numvecs);

This patch prevents it from the WARN() by adjusting the max_vector value
from the nvme_setup_irqs().

[1] WARN messages when modprobe nvme write_queues=32 poll_queues=0:
root@target:~/nvme# nproc
8
root@target:~/nvme# modprobe nvme write_queues=32 poll_queues=0
[   17.925326] nvme nvme0: pci function 0000:00:04.0
[   17.940601] WARNING: CPU: 3 PID: 1030 at kernel/irq/affinity.c:221 irq_create_affinity_masks+0x222/0x330
[   17.940602] Modules linked in: nvme nvme_core [last unloaded: nvme]
[   17.940605] CPU: 3 PID: 1030 Comm: kworker/u17:4 Tainted: G        W         5.1.0+ #156
[   17.940605] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
[   17.940608] Workqueue: nvme-reset-wq nvme_reset_work [nvme]
[   17.940609] RIP: 0010:irq_create_affinity_masks+0x222/0x330
[   17.940611] Code: 4c 8d 4c 24 28 4c 8d 44 24 30 e8 c9 fa ff ff 89 44 24 18 e8 c0 38 fa ff 8b 44 24 18 44 8b 54 24 1c 5a 44 01 d0 41 39 c4 76 02 <0f> 0b 48 89 df 44 01 e5 e8 f1 ce 10 00 48 8b 34 24 44 89 f0 44 01
[   17.940611] RSP: 0018:ffffc90002277c50 EFLAGS: 00010216
[   17.940612] RAX: 0000000000000008 RBX: ffff88807ca48860 RCX: 0000000000000000
[   17.940612] RDX: ffff88807bc03800 RSI: 0000000000000020 RDI: 0000000000000000
[   17.940613] RBP: 0000000000000001 R08: ffffc90002277c78 R09: ffffc90002277c70
[   17.940613] R10: 0000000000000008 R11: 0000000000000001 R12: 0000000000000020
[   17.940614] R13: 0000000000025d08 R14: 0000000000000001 R15: ffff88807bc03800
[   17.940614] FS:  0000000000000000(0000) GS:ffff88807db80000(0000) knlGS:0000000000000000
[   17.940616] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   17.940617] CR2: 00005635e583f790 CR3: 000000000240a000 CR4: 00000000000006e0
[   17.940617] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   17.940618] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   17.940618] Call Trace:
[   17.940622]  __pci_enable_msix_range+0x215/0x540
[   17.940623]  ? kernfs_put+0x117/0x160
[   17.940625]  pci_alloc_irq_vectors_affinity+0x74/0x110
[   17.940626]  nvme_reset_work+0xc30/0x1397 [nvme]
[   17.940628]  ? __switch_to_asm+0x34/0x70
[   17.940628]  ? __switch_to_asm+0x40/0x70
[   17.940629]  ? __switch_to_asm+0x34/0x70
[   17.940630]  ? __switch_to_asm+0x40/0x70
[   17.940630]  ? __switch_to_asm+0x34/0x70
[   17.940631]  ? __switch_to_asm+0x40/0x70
[   17.940632]  ? nvme_irq_check+0x30/0x30 [nvme]
[   17.940633]  process_one_work+0x20b/0x3e0
[   17.940634]  worker_thread+0x1f9/0x3d0
[   17.940635]  ? cancel_delayed_work+0xa0/0xa0
[   17.940636]  kthread+0x117/0x120
[   17.940637]  ? kthread_stop+0xf0/0xf0
[   17.940638]  ret_from_fork+0x3a/0x50
[   17.940639] ---[ end trace aca8a131361cd42a ]---
[   17.942124] nvme nvme0: 7/1/0 default/read/poll queues

Signed-off-by: Minwoo Im 
Signed-off-by: Christoph Hellwig 
Signed-off-by: Sasha Levin

nvme-pci: set the errno on ctrl state change error

2019-07-26T07:10:31+00:00

[ Upstream commit e71afda49335620e3d9adf56015676db33a3bd86 ]

This patch removes the confusing assignment of the variable result at
the time of declaration and sets the value in error cases next to the
places where the actual error is happening.

Here we also set the result value to -ENODEV when we fail at the final
ctrl state transition in nvme_reset_work(). Without this assignment
result will hold 0 from nvme_setup_io_queue() and on failure 0 will be
passed to he nvme_remove_dead_ctrl() from final state transition.

Signed-off-by: Chaitanya Kulkarni 
Signed-off-by: Christoph Hellwig 
Signed-off-by: Sasha Levin

nvme-pci: properly report state change failure in nvme_reset_work

2019-07-26T07:10:31+00:00

[ Upstream commit cee6c269b016ba89c62e34d6bccb103ee2c7de4f ]

If the state change to NVME_CTRL_CONNECTING fails, the dmesg is going to
be like:

  [  293.689160] nvme nvme0: failed to mark controller CONNECTING
  [  293.689160] nvme nvme0: Removing after probe failure status: 0

Even it prints the first line to indicate the situation, the second line
is not proper because the status is 0 which means normally success of
the previous operation.

This patch makes it indicate the proper error value when it fails.
  [   25.932367] nvme nvme0: failed to mark controller CONNECTING
  [   25.932369] nvme nvme0: Removing after probe failure status: -16

This situation is able to be easily reproduced by:
  root@target:~# rmmod nvme && modprobe nvme && rmmod nvme

Signed-off-by: Minwoo Im 
Reviewed-by: Chaitanya Kulkarni 
Signed-off-by: Christoph Hellwig 
Signed-off-by: Sasha Levin

nvme: fix possible io failures when removing multipathed ns

2019-07-26T07:10:31+00:00

[ Upstream commit 2181e455612a8db2761eabbf126640552a451e96 ]

When a shared namespace is removed, we call blk_cleanup_queue()
when the device can still be accessed as the current path and this can
result in submission to a dying queue. Hence, direct_make_request()
called by our mpath device may fail (propagating the failure to userspace).
Instead, we want to failover this I/O to a different path if one exists.
Thus, before we cleanup the request queue, we make sure that the device is
cleared from the current path nor it can be selected again as such.

Fix this by:
- clear the ns from the head->list and synchronize rcu to make sure there is
  no concurrent path search that restores it as the current path
- clear the mpath current path in order to trigger a subsequent path search
  and sync srcu to wait for any ongoing request submissions
- safely continue to namespace removal and blk_cleanup_queue

Signed-off-by: Anton Eidelman 
Signed-off-by: Sagi Grimberg 
Signed-off-by: Christoph Hellwig 
Signed-off-by: Sasha Levin