linux-stable.git/drivers/nvme, branch v4.20.2

nvmet-rdma: fix response use after free

2018-12-07T15:11:11+00:00

nvmet_rdma_release_rsp() may free the response before using it at error
flow.

Fixes: 8407879 ("nvmet-rdma: fix possible bogus dereference under heavy load")
Signed-off-by: Israel Rukshin 
Reviewed-by: Sagi Grimberg 
Reviewed-by: Max Gurtovoy 
Signed-off-by: Christoph Hellwig

nvme: validate controller state before rescheduling keep alive

2018-12-07T15:11:11+00:00

Delete operations are seeing NULL pointer references in call_timer_fn.
Tracking these back, the timer appears to be the keep alive timer.

nvme_keep_alive_work() which is tied to the timer that is cancelled
by nvme_stop_keep_alive(), simply starts the keep alive io but doesn't
wait for it's completion. So nvme_stop_keep_alive() only stops a timer
when it's pending. When a keep alive is in flight, there is no timer
running and the nvme_stop_keep_alive() will have no affect on the keep
alive io. Thus, if the io completes successfully, the keep alive timer
will be rescheduled.   In the failure case, delete is called, the
controller state is changed, the nvme_stop_keep_alive() is called while
the io is outstanding, and the delete path continues on. The keep
alive happens to successfully complete before the delete paths mark it
as aborted as part of the queue termination, so the timer is restarted.
The delete paths then tear down the controller, and later on the timer
code fires and the timer entry is now corrupt.

Fix by validating the controller state before rescheduling the keep
alive. Testing with the fix has confirmed the condition above was hit.

Signed-off-by: James Smart 
Reviewed-by: Sagi Grimberg 
Signed-off-by: Christoph Hellwig

nvme-rdma: fix double freeing of async event data

2018-11-30T16:23:23+00:00

Some error paths in configuration of admin queue free data buffer
associated with async request SQE without resetting the data buffer
pointer to NULL, This buffer is also freed up again if the controller
is shutdown or reset.

Signed-off-by: Prabhath Sajeepa 
Reviewed-by: Roland Dreier 
Signed-off-by: Christoph Hellwig

nvme: flush namespace scanning work just before removing namespaces

2018-11-30T16:23:23+00:00

nvme_stop_ctrl can be called also for reset flow and there is no need to
flush the scan_work as namespaces are not being removed. This can cause
deadlock in rdma, fc and loop drivers since nvme_stop_ctrl barriers
before controller teardown (and specifically I/O cancellation of the
scan_work itself) takes place, but the scan_work will be blocked anyways
so there is no need to flush it.

Instead, move scan_work flush to nvme_remove_namespaces() where it really
needs to flush.

Reported-by: Ming Lei 
Signed-off-by: Sagi Grimberg 
Reviewed-by: Keith Busch 
Reviewed by: James Smart 
Tested-by: Ewan D. Milne 
Signed-off-by: Christoph Hellwig

nvme: warn when finding multi-port subsystems without multipathing enabled

2018-11-30T16:23:22+00:00

Without CONFIG_NVME_MULTIPATH enabled a multi-port subsystem might
show up as invididual devices and cause problems, warn about it.

Signed-off-by: Christoph Hellwig 
Reviewed-by: Sagi Grimberg

nvme-pci: fix surprise removal

2018-11-27T17:12:26+00:00

When a PCIe NVMe device is not present, nvme_dev_remove_admin() calls
blk_cleanup_queue() on the admin queue, which frees the hctx for that
queue.  Moments later, on the same path nvme_kill_queues() calls
blk_mq_unquiesce_queue() on admin queue and tries to access hctx of it,
which leads to following OOPS:

Oops: 0000 [#1] SMP PTI
RIP: 0010:sbitmap_any_bit_set+0xb/0x40
Call Trace:
 blk_mq_run_hw_queue+0xd5/0x150
 blk_mq_run_hw_queues+0x3a/0x50
 nvme_kill_queues+0x26/0x50
 nvme_remove_namespaces+0xb2/0xc0
 nvme_remove+0x60/0x140
 pci_device_remove+0x3b/0xb0

Fixes: cb4bfda62afa2 ("nvme-pci: fix hot removal during error handling")
Signed-off-by: Igor Konopko 
Reviewed-by: Keith Busch 
Signed-off-by: Christoph Hellwig

nvme-fc: initialize nvme_req(rq)->ctrl after calling __nvme_fc_init_request()

2018-11-27T17:12:08+00:00

__nvme_fc_init_request() invokes memset() on the nvme_fcp_op_w_sgl structure, which
NULLed-out the nvme_req(req)->ctrl field previously set by nvme_fc_init_request().
This apparently was not referenced until commit faf4a44fff ("nvme: support traffic
based keep-alive") which now results in a crash in nvme_complete_rq():

[ 8386.897130] RIP: 0010:panic+0x220/0x26c
[ 8386.901406] Code: 83 3d 6f ee 72 01 00 74 05 e8 e8 54 02 00 48 c7 c6 40 fd 5b b4 48 c7 c7 d8 8d c6 b3 31e
[ 8386.922359] RSP: 0018:ffff99650019fc40 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
[ 8386.930804] RAX: 0000000000000046 RBX: 0000000000000000 RCX: 0000000000000006
[ 8386.938764] RDX: 0000000000000000 RSI: 0000000000000082 RDI: ffff8e325f8168b0
[ 8386.946725] RBP: ffff99650019fcb0 R08: 0000000000000000 R09: 00000000000004f8
[ 8386.954687] R10: 0000000000000000 R11: ffff99650019f9b8 R12: ffffffffb3c55f3c
[ 8386.962648] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000001
[ 8386.970613]  oops_end+0xd1/0xe0
[ 8386.974116]  no_context+0x1b2/0x3c0
[ 8386.978006]  do_page_fault+0x32/0x140
[ 8386.982090]  page_fault+0x1e/0x30
[ 8386.985786] RIP: 0010:nvme_complete_rq+0x65/0x1d0 [nvme_core]
[ 8386.992195] Code: 41 bc 03 00 00 00 74 16 0f 86 c3 00 00 00 66 3d 83 00 41 bc 06 00 00 00 0f 85 e7 00 000
[ 8387.013147] RSP: 0018:ffff99650019fe18 EFLAGS: 00010246
[ 8387.018973] RAX: 0000000000000000 RBX: ffff8e322ae51280 RCX: 0000000000000001
[ 8387.026935] RDX: 0000000000000400 RSI: 0000000000000001 RDI: ffff8e322ae51280
[ 8387.034897] RBP: ffff8e322ae51280 R08: 0000000000000000 R09: ffffffffb2f0b890
[ 8387.042859] R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000
[ 8387.050821] R13: 0000000000000100 R14: 0000000000000004 R15: ffff8e2b0446d990
[ 8387.058782]  ? swiotlb_unmap_page+0x40/0x40
[ 8387.063448]  nvme_fc_complete_rq+0x2d/0x70 [nvme_fc]
[ 8387.068986]  blk_done_softirq+0xa1/0xd0
[ 8387.073264]  __do_softirq+0xd6/0x2a9
[ 8387.077251]  run_ksoftirqd+0x26/0x40
[ 8387.081238]  smpboot_thread_fn+0x10e/0x160
[ 8387.085807]  kthread+0xf8/0x130
[ 8387.089309]  ? sort_range+0x20/0x20
[ 8387.093198]  ? kthread_stop+0x110/0x110
[ 8387.097475]  ret_from_fork+0x35/0x40
[ 8387.101462] ---[ end trace 7106b0adf5e422f8 ]---

Fixes: faf4a44fff ("nvme: support traffic based keep-alive")
Signed-off-by: Ewan D. Milne 
Reviewed-by: Hannes Reinecke 
Signed-off-by: Christoph Hellwig

nvme: Free ctrl device name on init failure

2018-11-27T07:35:15+00:00

Free the kobject name that was allocated for the controller device on
failure rather than its parent.

Fixes: d22524a4782a9 ("nvme: switch controller refcounting to use struct device")
Signed-off-by: Keith Busch 
Signed-off-by: Christoph Hellwig

nvme-fc: resolve io failures during connect

2018-11-15T10:37:55+00:00

If an io error occurs on an io issued while connecting, recovery
of the io falls flat as the state checking ends up nooping the error
handler.

Create an err_work work item that is scheduled upon an io error while
connecting. The work thread terminates all io on all queues and marks
the queues as not connected.  The termination of the io will return
back to the callee, which will then back out of the connection attempt
and will reschedule, if possible, the connection attempt.

The changes:
- in case there are several commands hitting the error handler, a
  state flag is kept so that the error work is only scheduled once,
  on the first error. The subsequent errors can be ignored.
- The calling sequence to stop keep alive and terminate the queues
  and their io is lifted from the reset routine. Made a small
  service routine used by both reset and err_work.
- During debugging, found that the teardown path can reference
  an uninitialized pointer, resulting in a NULL pointer oops.
  The aen_ops weren't initialized yet. Add validation on their
  initialization before calling the teardown routine.

Signed-off-by: James Smart 
Signed-off-by: Christoph Hellwig

Merge tag 'for-linus-20181109' of git://git.kernel.dk/linux-block

2018-11-09T22:31:51+00:00

Pull block layer fixes from Jens Axboe:

 - Two fixes for an ubd regression, one for missing locking, and one for
   a missing initialization of a field. The latter was an old latent
   bug, but it's now visible and triggers (Me, Anton Ivanov)

 - Set of NVMe fixes via Christoph, but applied manually due to a git
   tree mixup (Christoph, Sagi)

 - Fix for a discard split regression, in three patches (Ming)

 - Update libata git trees (Geert)

 - SPDX identifier for sata_rcar (Kuninori Morimoto)

 - Virtual boundary merge fix (Johannes)

 - Preemptively clear memory we are going to pass to userspace, in case
   the driver does a short read (Keith)

* tag 'for-linus-20181109' of git://git.kernel.dk/linux-block:
  block: make sure writesame bio is aligned with logical block size
  block: cleanup __blkdev_issue_discard()
  block: make sure discard bio is aligned with logical block size
  Revert "nvmet-rdma: use a private workqueue for delete"
  nvme: make sure ns head inherits underlying device limits
  nvmet: don't try to add ns to p2p map unless it actually uses it
  sata_rcar: convert to SPDX identifiers
  ubd: fix missing initialization of io_req
  block: Clear kernel memory before copying to user
  MAINTAINERS: Fix remaining pointers to obsolete libata.git
  ubd: fix missing lock around request issue
  block: respect virtual boundary mask in bvecs