[ Upstream commit 863fbae929c7a5b64e96b8a3ffb34a29eefb9f8f ] In nvme-fc: it's possible to have connected active controllers and as no references are taken on the LLDD, the LLDD can be unloaded. The controller would enter a reconnect state and as long as the LLDD resumed within the reconnect timeout, the controller would resume. But if a namespace on the controller is the root device, allowing the driver to unload can be problematic. To reload the driver, it may require new io to the boot device, and as it's no longer connected we get into a catch-22 that eventually fails, and the system locks up. Fix this issue by taking a module reference for every connected controller (which is what the core layer did to the transport module). Reference is cleared when the controller is removed. Acked-by: Himanshu Madhani <hmadhani@marvell.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
commit e9a9853c23c13a37546397b61b270999fd0fb759 upstream. Ternary operator have lower precedence then bitwise or, so 'cdw10' was calculated wrong. Signed-off-by: Ivan Bornyakov <brnkv.i1@gmail.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1216e9ef18b84f4fb5934792368fb01eb3540520 ]
Building with W=1 enables the compiler warning -Wimplicit-fallthrough=3. That
option does not recognize the fall-through comment in the fcloop driver. Add
a fall-through comment that is recognized for -Wimplicit-fallthrough=3. This
patch avoids that the compiler reports the following warning when building
with W=1:
drivers/nvme/target/fcloop.c:647:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (op == NVMET_FCOP_READDATA)
^
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3bec2e3754becebd4c452999adb49bc62c575ea4 ] In nvme spec 1.3 there is a definition for data write/read counters from SMART log, (See section 5.14.1.2): This value is reported in thousands (i.e., a value of 1 corresponds to 1000 units of 512 bytes read) and is rounded up. However, in nvme target where value is reported with actual units, but not thousands of units as the spec requires. Signed-off-by: Tom Wu <tomwu@mellanox.com> Reviewed-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c8e8c77b3bdbade6e26e8e76595f141ede12b692 ] The Number of Namespaces (nn) field in the identify controller data structure is defined as u32 and the maximum allowed value in NVMe specification is 0xFFFFFFFEUL. This change fixes the possible overflow of the DIV_ROUND_UP() operation used in nvme_scan_ns_list() by casting the nn to u64. Signed-off-by: Jaesoo Lee <jalee@purestorage.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3f98bcc58cd5f1e4668db289dcab771874cc0920 ] We already have a proper stub if lightnvm is not enabled, so don't bother with the ifdef. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c8e9e9b7646ebe1c5066ddc420d7630876277eb4 ] Just like IO queues, the admin queue also will not be restarted after a controller shutdown. Unquiesce this queue so that we do not block request dispatch on a permanently disabled controller. Reported-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d11de63f2b519f0a162b834013b6d3a46dbf3886 ] After commit 4d43d395fe (workqueue: Try to catch flush_work() without INIT_WORK()), it can cause warning when delete nvme-loop device, trace like: [ 76.601272] Call Trace: [ 76.601646] ? del_timer+0x72/0xa0 [ 76.602156] __cancel_work_timer+0x1ae/0x270 [ 76.602791] cancel_work_sync+0x14/0x20 [ 76.603407] nvmet_ctrl_free+0x1b7/0x2f0 [nvmet] [ 76.604091] ? free_percpu+0x168/0x300 [ 76.604652] nvmet_sq_destroy+0x106/0x240 [nvmet] [ 76.605346] nvme_loop_destroy_admin_queue+0x30/0x60 [nvme_loop] [ 76.606220] nvme_loop_shutdown_ctrl+0xc3/0xf0 [nvme_loop] [ 76.607026] nvme_loop_delete_ctrl_host+0x19/0x30 [nvme_loop] [ 76.607871] nvme_do_delete_ctrl+0x75/0xb0 [ 76.608477] nvme_sysfs_delete+0x7d/0xc0 [ 76.609057] dev_attr_store+0x24/0x40 [ 76.609603] sysfs_kf_write+0x4c/0x60 [ 76.610144] kernfs_fop_write+0x19a/0x260 [ 76.610742] __vfs_write+0x1c/0x60 [ 76.611246] vfs_write+0xfa/0x280 [ 76.611739] ksys_write+0x6e/0x120 [ 76.612238] __x64_sys_write+0x1e/0x30 [ 76.612787] do_syscall_64+0xbf/0x3a0 [ 76.613329] entry_SYSCALL_64_after_hwframe+0x44/0xa9 We fix it by moving fatal_err_work init to nvmet_alloc_ctrl(), which may more reasonable. Signed-off-by: Yufen Yu <yuyufen@huawei.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cc667f6d5de023ee131e96bb88e5cddca23272bd ] When using HMB the PCIe host driver allocates host_mem_desc_bufs using dma_alloc_attrs() but frees them using dma_free_coherent(). Use the correct dma_free_attrs() function to free the buffers. Signed-off-by: Liviu Dudau <liviu@dudau.co.uk> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 5cbab6303b4791a3e6713dfe2c5fda6a867f9adc upstream.
Under heavy load if we don't have any pre-allocated rsps left, we
dynamically allocate a rsp, but we are not actually allocating memory
for nvme_completion (rsp->req.rsp). In such a case, accessing pointer
fields (req->rsp->status) in nvmet_req_init() will result in crash.
To fix this, allocate the memory for nvme_completion by calling
nvmet_rdma_alloc_rsp()
Fixes: 8407879c("nvmet-rdma:fix possible bogus dereference under heavy load")
Cc: <stable@vger.kernel.org>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Raju Rangoju <rajur@chelsio.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>