linux-stable.git/drivers/nvme, branch linux-6.8.y Linux kernel stable tree nvmet: prevent sprintf() overflow in nvmet_subsys_nsid_exists() 2024-05-30T07:48:56+00:00 Dan Carpenter dan.carpenter@linaro.org 2024-05-08T07:43:04+00:00 a06725cb75110f0c0ae39fb8fb2f7104142224c5 [ Upstream commit d15dcd0f1a4753b57e66c64c8dc2a9779ff96aab ] The nsid value is a u32 that comes from nvmet_req_find_ns(). It's endian data and we're on an error path and both of those raise red flags. So let's make this safer. 1) Make the buffer large enough for any u32. 2) Remove the unnecessary initialization. 3) Use snprintf() instead of sprintf() for even more safety. 4) The sprintf() function returns the number of bytes printed, not counting the NUL terminator. It is impossible for the return value to be <= 0 so delete that. Fixes: 505363957fad ("nvmet: fix nvme status code when namespace is disabled") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit d15dcd0f1a4753b57e66c64c8dc2a9779ff96aab ]

The nsid value is a u32 that comes from nvmet_req_find_ns().  It's
endian data and we're on an error path and both of those raise red
flags.  So let's make this safer.

1) Make the buffer large enough for any u32.
2) Remove the unnecessary initialization.
3) Use snprintf() instead of sprintf() for even more safety.
4) The sprintf() function returns the number of bytes printed, not
   counting the NUL terminator. It is impossible for the return value to
   be <= 0 so delete that.

Fixes: 505363957fad ("nvmet: fix nvme status code when namespace is disabled")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
nvme-tcp: strict pdu pacing to avoid send stalls on TLS 2024-05-30T07:48:55+00:00 Hannes Reinecke hare@kernel.org 2024-04-18T10:39:45+00:00 c810dd91cca23244e9826761f3a98952e9109b54 [ Upstream commit 50abcc179e0c9ca667feb223b26ea406d5c4c556 ] TLS requires a strict pdu pacing via MSG_EOR to signal the end of a record and subsequent encryption. If we do not set MSG_EOR at the end of a sequence the record won't be closed, encryption doesn't start, and we end up with a send stall as the message will never be passed on to the TCP layer. So do not check for the queue status when TLS is enabled but rather make the MSG_MORE setting dependent on the current request only. Signed-off-by: Hannes Reinecke <hare@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 50abcc179e0c9ca667feb223b26ea406d5c4c556 ]

TLS requires a strict pdu pacing via MSG_EOR to signal the end
of a record and subsequent encryption. If we do not set MSG_EOR
at the end of a sequence the record won't be closed, encryption
doesn't start, and we end up with a send stall as the message
will never be passed on to the TCP layer.
So do not check for the queue status when TLS is enabled but
rather make the MSG_MORE setting dependent on the current
request only.

Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
nvmet: fix nvme status code when namespace is disabled 2024-05-30T07:48:55+00:00 Sagi Grimberg sagi@grimberg.me 2024-04-28T09:25:40+00:00 dffd29d230b76d2b42300c6436d478d933113546 [ Upstream commit 505363957fad35f7aed9a2b0d8dad73451a80fb5 ] If the user disabled a nvmet namespace, it is removed from the subsystem namespaces list. When nvmet processes a command directed to an nsid that was disabled, it cannot differentiate between a nsid that is disabled vs. a non-existent namespace, and resorts to return NVME_SC_INVALID_NS with the dnr bit set. This translates to a non-retryable status for the host, which translates to a user error. We should expect disabled namespaces to not cause an I/O error in a multipath environment. Address this by searching a configfs item for the namespace nvmet failed to find, and if we found one, conclude that the namespace is disabled (perhaps temporarily). Return NVME_SC_INTERNAL_PATH_ERROR in this case and keep DNR bit cleared. Reported-by: Jirong Feng <jirong.feng@easystack.cn> Tested-by: Jirong Feng <jirong.feng@easystack.cn> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 505363957fad35f7aed9a2b0d8dad73451a80fb5 ]

If the user disabled a nvmet namespace, it is removed from the subsystem
namespaces list. When nvmet processes a command directed to an nsid that
was disabled, it cannot differentiate between a nsid that is disabled
vs. a non-existent namespace, and resorts to return NVME_SC_INVALID_NS
with the dnr bit set.

This translates to a non-retryable status for the host, which translates
to a user error. We should expect disabled namespaces to not cause an
I/O error in a multipath environment.

Address this by searching a configfs item for the namespace nvmet failed
to find, and if we found one, conclude that the namespace is disabled
(perhaps temporarily). Return NVME_SC_INTERNAL_PATH_ERROR in this case
and keep DNR bit cleared.

Reported-by: Jirong Feng <jirong.feng@easystack.cn>
Tested-by: Jirong Feng <jirong.feng@easystack.cn>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
nvmet-tcp: fix possible memory leak when tearing down a controller 2024-05-30T07:48:55+00:00 Sagi Grimberg sagi@grimberg.me 2024-04-28T08:49:49+00:00 34f20131bd404e331c839d68aa6df28d611c8845 [ Upstream commit 6825bdde44340c5a9121f6d6fa25cc885bd9e821 ] When we teardown the controller, we wait for pending I/Os to complete (sq->ref on all queues to drop to zero) and then we go over the commands, and free their command buffers in case they are still fetching data from the host (e.g. processing nvme writes) and have yet to take a reference on the sq. However, we may miss the case where commands have failed before executing and are queued for sending a response, but will never occur because the queue socket is already down. In this case we may miss deallocating command buffers. Solve this by freeing all commands buffers as nvmet_tcp_free_cmd_buffers is idempotent anyways. Reported-by: Yi Zhang <yi.zhang@redhat.com> Tested-by: Yi Zhang <yi.zhang@redhat.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 6825bdde44340c5a9121f6d6fa25cc885bd9e821 ]

When we teardown the controller, we wait for pending I/Os to complete
(sq->ref on all queues to drop to zero) and then we go over the commands,
and free their command buffers in case they are still fetching data from
the host (e.g. processing nvme writes) and have yet to take a reference
on the sq.

However, we may miss the case where commands have failed before executing
and are queued for sending a response, but will never occur because the
queue socket is already down. In this case we may miss deallocating command
buffers.

Solve this by freeing all commands buffers as nvmet_tcp_free_cmd_buffers is
idempotent anyways.

Reported-by: Yi Zhang <yi.zhang@redhat.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
nvme: cancel pending I/O if nvme controller is in terminal state 2024-05-30T07:48:55+00:00 Nilay Shroff nilay@linux.ibm.com 2024-04-25T14:03:00+00:00 052fdf4e5b0c7dd2e469cdf3839fdad51a6194ec [ Upstream commit 25bb3534ee21e39eb9301c4edd7182eb83cb0d07 ] While I/O is running, if the pci bus error occurs then in-flight I/O can not complete. Worst, if at this time, user (logically) hot-unplug the nvme disk then the nvme_remove() code path can't forward progress until in-flight I/O is cancelled. So these sequence of events may potentially hang hot-unplug code path indefinitely. This patch helps cancel the pending/in-flight I/O from the nvme request timeout handler in case the nvme controller is in the terminal (DEAD/DELETING/DELETING_NOIO) state and that helps nvme_remove() code path forward progress and finish successfully. Link: https://lore.kernel.org/all/199be893-5dfa-41e5-b6f2-40ac90ebccc4@linux.ibm.com/ Signed-off-by: Nilay Shroff <nilay@linux.ibm.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 25bb3534ee21e39eb9301c4edd7182eb83cb0d07 ]

While I/O is running, if the pci bus error occurs then
in-flight I/O can not complete. Worst, if at this time,
user (logically) hot-unplug the nvme disk then the
nvme_remove() code path can't forward progress until
in-flight I/O is cancelled. So these sequence of events
may potentially hang hot-unplug code path indefinitely.
This patch helps cancel the pending/in-flight I/O from the
nvme request timeout handler in case the nvme controller
is in the terminal (DEAD/DELETING/DELETING_NOIO) state and
that helps nvme_remove() code path forward progress and
finish successfully.

Link: https://lore.kernel.org/all/199be893-5dfa-41e5-b6f2-40ac90ebccc4@linux.ibm.com/
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
nvmet-auth: replace pr_debug() with pr_err() to report an error. 2024-05-30T07:48:55+00:00 Maurizio Lombardi mlombard@redhat.com 2024-04-10T09:48:42+00:00 2e10fc83897bab8fbfe787458e2e278b68a93368 [ Upstream commit 445f9119e70368ccc964575c2a6d3176966a9d65 ] In nvmet_auth_host_hash(), if a mismatch is detected in the hash length the kernel should print an error. Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 445f9119e70368ccc964575c2a6d3176966a9d65 ]

In nvmet_auth_host_hash(), if a mismatch is detected in the hash length
the kernel should print an error.

Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
nvmet-auth: return the error code to the nvmet_auth_host_hash() callers 2024-05-30T07:48:55+00:00 Maurizio Lombardi mlombard@redhat.com 2024-04-10T09:48:41+00:00 19abd26d8cb0806348921e9f2d5ba3162279de34 [ Upstream commit 46b8f9f74f6d500871985e22eb19560b21f3bc81 ] If the nvmet_auth_host_hash() function fails, the error code should be returned to its callers. Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 46b8f9f74f6d500871985e22eb19560b21f3bc81 ]

If the nvmet_auth_host_hash() function fails, the error code should
be returned to its callers.

Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
nvme: find numa distance only if controller has valid numa id 2024-05-30T07:48:55+00:00 Nilay Shroff nilay@linux.ibm.com 2024-04-16T08:19:23+00:00 342700a44cfbfbaaeecc41bc9f995412e542e3ec [ Upstream commit 863fe60ed27f2c85172654a63c5b827e72c8b2e6 ] On system where native nvme multipath is configured and iopolicy is set to numa but the nvme controller numa node id is undefined or -1 (NUMA_NO_NODE) then avoid calculating node distance for finding optimal io path. In such case we may access numa distance table with invalid index and that may potentially refer to incorrect memory. So this patch ensures that if the nvme controller numa node id is -1 then instead of calculating node distance for finding optimal io path, we set the numa node distance of such controller to default 10 (LOCAL_DISTANCE). Link: https://lore.kernel.org/all/20240413090614.678353-1-nilay@linux.ibm.com/ Signed-off-by: Nilay Shroff <nilay@linux.ibm.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 863fe60ed27f2c85172654a63c5b827e72c8b2e6 ]

On system where native nvme multipath is configured and iopolicy
is set to numa but the nvme controller numa node id is undefined
or -1 (NUMA_NO_NODE) then avoid calculating node distance for
finding optimal io path. In such case we may access numa distance
table with invalid index and that may potentially refer to incorrect
memory. So this patch ensures that if the nvme controller numa node
id is -1 then instead of calculating node distance for finding optimal
io path, we set the numa node distance of such controller to default 10
(LOCAL_DISTANCE).

Link: https://lore.kernel.org/all/20240413090614.678353-1-nilay@linux.ibm.com/
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
nvme-pci: Add quirk for broken MSIs 2024-05-17T10:15:09+00:00 Sean Anderson sean.anderson@linux.dev 2024-04-22T16:28:23+00:00 6a607d1baf33b5aa0977062f9891887a17734bf3 commit d5887dc6b6c054d0da3cd053afc15b7be1f45ff6 upstream. Sandisk SN530 NVMe drives have broken MSIs. On systems without MSI-X support, all commands time out resulting in the following message: nvme nvme0: I/O tag 12 (100c) QID 0 timeout, completion polled These timeouts cause the boot to take an excessively-long time (over 20 minutes) while the initial command queue is flushed. Address this by adding a quirk for drives with buggy MSIs. The lspci output for this device (recorded on a system with MSI-X support) is: 02:00.0 Non-Volatile memory controller: Sandisk Corp Device 5008 (rev 01) (prog-if 02 [NVM Express]) Subsystem: Sandisk Corp Device 5008 Flags: bus master, fast devsel, latency 0, IRQ 16, NUMA node 0 Memory at f7e00000 (64-bit, non-prefetchable) [size=16K] Memory at f7e04000 (64-bit, non-prefetchable) [size=256] Capabilities: [80] Power Management version 3 Capabilities: [90] MSI: Enable- Count=1/32 Maskable- 64bit+ Capabilities: [b0] MSI-X: Enable+ Count=17 Masked- Capabilities: [c0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [150] Device Serial Number 00-00-00-00-00-00-00-00 Capabilities: [1b8] Latency Tolerance Reporting Capabilities: [300] Secondary PCI Express Capabilities: [900] L1 PM Substates Kernel driver in use: nvme Kernel modules: nvme Cc: <stable@vger.kernel.org> Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit d5887dc6b6c054d0da3cd053afc15b7be1f45ff6 upstream.

Sandisk SN530 NVMe drives have broken MSIs. On systems without MSI-X
support, all commands time out resulting in the following message:

nvme nvme0: I/O tag 12 (100c) QID 0 timeout, completion polled

These timeouts cause the boot to take an excessively-long time (over 20
minutes) while the initial command queue is flushed.

Address this by adding a quirk for drives with buggy MSIs. The lspci
output for this device (recorded on a system with MSI-X support) is:

02:00.0 Non-Volatile memory controller: Sandisk Corp Device 5008 (rev 01) (prog-if 02 [NVM Express])
	Subsystem: Sandisk Corp Device 5008
	Flags: bus master, fast devsel, latency 0, IRQ 16, NUMA node 0
	Memory at f7e00000 (64-bit, non-prefetchable) [size=16K]
	Memory at f7e04000 (64-bit, non-prefetchable) [size=256]
	Capabilities: [80] Power Management version 3
	Capabilities: [90] MSI: Enable- Count=1/32 Maskable- 64bit+
	Capabilities: [b0] MSI-X: Enable+ Count=17 Masked-
	Capabilities: [c0] Express Endpoint, MSI 00
	Capabilities: [100] Advanced Error Reporting
	Capabilities: [150] Device Serial Number 00-00-00-00-00-00-00-00
	Capabilities: [1b8] Latency Tolerance Reporting
	Capabilities: [300] Secondary PCI Express
	Capabilities: [900] L1 PM Substates
	Kernel driver in use: nvme
	Kernel modules: nvme

Cc: <stable@vger.kernel.org>
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
nvme: fix warn output about shared namespaces without CONFIG_NVME_MULTIPATH 2024-05-17T10:14:26+00:00 Yi Zhang yi.zhang@redhat.com 2024-04-10T00:57:14+00:00 5bb8c1b047d30126fe44f0a37293b0445eef0f58 [ Upstream commit 0bc2e80b9be51712b19e919db5abc97a418f8292 ] Move the stray '.' that is currently at the end of the line after newline '\n' to before newline character which is the right position. Fixes: ce8d78616a6b ("nvme: warn about shared namespaces without CONFIG_NVME_MULTIPATH") Signed-off-by: Yi Zhang <yi.zhang@redhat.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 0bc2e80b9be51712b19e919db5abc97a418f8292 ]

Move the stray '.' that is currently at the end of the line after
newline '\n' to before newline character which is the right position.

Fixes: ce8d78616a6b ("nvme: warn about shared namespaces without CONFIG_NVME_MULTIPATH")
Signed-off-by: Yi Zhang <yi.zhang@redhat.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>