linux-stable.git/drivers/ntb/test, branch v5.4.151

NTB: perf: Fix an error code in perf_setup_inbuf()

2021-09-22T10:26:44+00:00

[ Upstream commit 0097ae5f7af5684f961a5f803ff7ad3e6f933668 ]

When the function IS_ALIGNED() returns false, the value of ret is 0.
So, we set ret to -EINVAL to indicate this error.

Clean up smatch warning:
drivers/ntb/test/ntb_perf.c:602 perf_setup_inbuf() warn: missing error
code 'ret'.

Reported-by: Abaci Robot 
Signed-off-by: Yang Li 
Reviewed-by: Serge Semin 
Signed-off-by: Jon Mason 
Signed-off-by: Sasha Levin

NTB: Fix an error code in ntb_msit_probe()

2021-09-22T10:26:44+00:00

[ Upstream commit 319f83ac98d7afaabab84ce5281a819a358b9895 ]

When the value of nm->isr_ctx is false, the value of ret is 0.
So, we set ret to -ENOMEM to indicate this error.

Clean up smatch warning:
drivers/ntb/test/ntb_msi_test.c:373 ntb_msit_probe() warn: missing
error code 'ret'.

Reported-by: Abaci Robot 
Signed-off-by: Yang Li 
Reviewed-by: Logan Gunthorpe 
Signed-off-by: Jon Mason 
Signed-off-by: Sasha Levin

NTB: perf: Fix race condition when run with ntb_test

2020-06-24T15:50:41+00:00

[ Upstream commit 34d8673a01b053b6231a995a4eec9341163d63be ]

When running ntb_test, the script tries to run the ntb_perf test
immediately after probing the modules. Since adding multi-port support,
this fails seeing the new initialization procedure in ntb_perf
can not complete instantly.

To fix this we add a completion which is waited on when a test is
started. In this way, run can be written any time after the module is
loaded and it will wait for the initialization to complete instead of
sending an error.

Fixes: 5648e56d03fa ("NTB: ntb_perf: Add full multi-port NTB API support")
Signed-off-by: Logan Gunthorpe 
Acked-by: Allen Hubbe 
Tested-by: Alexander Fomichev 
Signed-off-by: Jon Mason 
Signed-off-by: Sasha Levin

NTB: perf: Fix support for hardware that doesn't have port numbers

2020-06-24T15:50:41+00:00

[ Upstream commit b54369a248c2e033bfcf5d6917e08cf9d73d54a6 ]

Legacy drivers do not have port numbers (but is reliably only two ports)
and was broken by the recent commit that added mult-port support to
ntb_perf. This is especially important to support the cross link
topology which is perfectly symmetric and cannot assign unique port
numbers easily.

Hardware that returns zero for both the local port and the peer should
just always use gidx=0 for the only peer.

Fixes: 5648e56d03fa ("NTB: ntb_perf: Add full multi-port NTB API support")
Signed-off-by: Logan Gunthorpe 
Acked-by: Allen Hubbe 
Tested-by: Alexander Fomichev 
Signed-off-by: Jon Mason 
Signed-off-by: Sasha Levin

NTB: perf: Don't require one more memory window than number of peers

2020-06-24T15:50:40+00:00

[ Upstream commit a9c4211ac918ade1522aced6b5acfbe824722f7d ]

ntb_perf should not require more than one memory window per peer. This
was probably an off-by-one error.

Fixes: 5648e56d03fa ("NTB: ntb_perf: Add full multi-port NTB API support")
Signed-off-by: Logan Gunthorpe 
Acked-by: Allen Hubbe 
Tested-by: Alexander Fomichev 
Signed-off-by: Jon Mason 
Signed-off-by: Sasha Levin

NTB: ntb_tool: reading the link file should not end in a NULL byte

2020-06-24T15:50:40+00:00

[ Upstream commit 912e12813dd03c602e4922fc34709ec4d4380cf0 ]

When running ntb_test this warning is issued:

./ntb_test.sh: line 200: warning: command substitution: ignored null
byte in input

This is caused by the kernel returning one more byte than is necessary
when reading the link file.

Reduce the number of bytes read back to 2 as it was before the
commit that regressed this.

Fixes: 7f46c8b3a552 ("NTB: ntb_tool: Add full multi-port NTB API support")
Signed-off-by: Logan Gunthorpe 
Acked-by: Allen Hubbe 
Tested-by: Alexander Fomichev 
Signed-off-by: Jon Mason 
Signed-off-by: Sasha Levin

ntb_tool: pass correct struct device to dma_alloc_coherent

2020-06-24T15:50:40+00:00

[ Upstream commit 433efe720674efd9fdbcef78be75793393cf05db ]

Currently, ntb->dev is passed to dma_alloc_coherent
and dma_free_coherent calls. The returned dma_addr_t
is the CPU physical address. This works fine as long
as IOMMU is disabled. But when IOMMU is enabled, we
need to make sure that IOVA is returned for dma_addr_t.
So the correct way to achieve this is by changing the
first parameter of dma_alloc_coherent() as ntb->pdev->dev
instead.

Fixes: 5648e56d03fa ("NTB: ntb_perf: Add full multi-port NTB API support")
Signed-off-by: Sanjay R Mehta 
Signed-off-by: Arindam Nath 
Signed-off-by: Jon Mason 
Signed-off-by: Sasha Levin

ntb_perf: pass correct struct device to dma_alloc_coherent

2020-06-24T15:50:40+00:00

[ Upstream commit 98f4e140264eeb52f22ff05be6b6dd48237255ac ]

Currently, ntb->dev is passed to dma_alloc_coherent
and dma_free_coherent calls. The returned dma_addr_t
is the CPU physical address. This works fine as long
as IOMMU is disabled. But when IOMMU is enabled, we
need to make sure that IOVA is returned for dma_addr_t.
So the correct way to achieve this is by changing the
first parameter of dma_alloc_coherent() as ntb->pdev->dev
instead.

Fixes: 5648e56d03fa ("NTB: ntb_perf: Add full multi-port NTB API support")
Signed-off-by: Logan Gunthorpe 
Signed-off-by: Sanjay R Mehta 
Signed-off-by: Arindam Nath 
Signed-off-by: Jon Mason 
Signed-off-by: Sasha Levin

NTB: ntb_pingpong: Choose doorbells based on port number

2020-06-24T15:50:18+00:00

[ Upstream commit ca93c45755da98302c93abdd788fc09113baf9e0 ]

This commit fixes pingpong support for existing drivers that do not
implement ntb_default_port_number() and ntb_default_peer_port_number().
This is required for hardware (like the crosslink topology of
switchtec) which cannot assign reasonable port numbers to each port due
to its perfect symmetry.

Instead of picking the doorbell to use based on the the index of the
peer, we use the peer's port number. This is a bit clearer and easier
to understand.

Fixes: c7aeb0afdcc2 ("NTB: ntb_pp: Add full multi-port NTB API support")
Signed-off-by: Logan Gunthorpe 
Acked-by: Allen Hubbe 
Tested-by: Alexander Fomichev 
Signed-off-by: Jon Mason 
Signed-off-by: Sasha Levin

ntb: point to right memory window index

2019-09-23T21:20:27+00:00

second parameter of ntb_peer_mw_get_addr is pointing to wrong memory
window index by passing "peer gidx" instead of "local gidx".

For ex, "local gidx" value is '0' and "peer gidx" value is '1', then

on peer side ntb_mw_set_trans() api is used as below with gidx pointing to
local side gidx which is '0', so memroy window '0' is chosen and XLAT '0'
will be programmed by peer side.

    ntb_mw_set_trans(perf->ntb, peer->pidx, peer->gidx, peer->inbuf_xlat,
                    peer->inbuf_size);

Now, on local side ntb_peer_mw_get_addr() is been used as below with gidx
pointing to "peer gidx" which is '1', so pointing to memory window '1'
instead of memory window '0'.

    ntb_peer_mw_get_addr(perf->ntb,  peer->gidx, &phys_addr,
                        &peer->outbuf_size);

So this patch pass "local gidx" as parameter to ntb_peer_mw_get_addr().

Signed-off-by: Sanjay R Mehta 
Signed-off-by: Jon Mason