linux-stable.git/drivers/nfc, branch v4.9.334

nfc: nfcmrvl: Fix potential memory leak in nfcmrvl_i2c_nci_send()

2022-11-10T14:46:05+00:00

[ Upstream commit 93d904a734a74c54d945a9884b4962977f1176cd ]

nfcmrvl_i2c_nci_send() will be called by nfcmrvl_nci_send(), and skb
should be freed in nfcmrvl_i2c_nci_send(). However, nfcmrvl_nci_send()
will only free skb when i2c_master_send() return >=0, which means skb
will memleak when i2c_master_send() failed. Free skb no matter whether
i2c_master_send() succeeds.

Fixes: b5b3e23e4cac ("NFC: nfcmrvl: add i2c driver")
Signed-off-by: Shang XiaoJing 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

nfc: s3fwrn5: Fix potential memory leak in s3fwrn5_nci_send()

2022-11-10T14:46:05+00:00

[ Upstream commit 3a146b7e3099dc7cf3114f627d9b79291e2d2203 ]

s3fwrn5_nci_send() will call s3fwrn5_i2c_write() or s3fwrn82_uart_write(),
and free the skb if write() failed. However, even if the write() run
succeeds, the skb will not be freed in write(). As the result, the skb
will memleak. s3fwrn5_nci_send() should also free the skb when write()
succeeds.

Fixes: c04c674fadeb ("nfc: s3fwrn5: Add driver for Samsung S3FWRN5 NFC Chip")
Signed-off-by: Shang XiaoJing 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

NFC: nxp-nci: don't print header length mismatch on i2c error

2022-07-21T18:40:32+00:00

[ Upstream commit 9577fc5fdc8b07b891709af6453545db405e24ad ]

Don't print a misleading header length mismatch error if the i2c call
returns an error. Instead just return the error code without any error
message.

Signed-off-by: Michael Walle 
Reviewed-by: Krzysztof Kozlowski 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

NFC: nxp-nci: Don't issue a zero length i2c_master_read()

2022-07-07T15:30:10+00:00

commit eddd95b9423946aaacb55cac6a9b2cea8ab944fc upstream.

There are packets which doesn't have a payload. In that case, the second
i2c_master_read() will have a zero length. But because the NFC
controller doesn't have any data left, it will NACK the I2C read and
-ENXIO will be returned. In case there is no payload, just skip the
second i2c master read.

Fixes: 6be88670fc59 ("NFC: nxp-nci_i2c: Add I2C support to NXP NCI driver")
Signed-off-by: Michael Walle 
Reviewed-by: Krzysztof Kozlowski 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

nfc: nfcmrvl: Fix irq_of_parse_and_map() return value

2022-07-07T15:30:10+00:00

commit 5a478a653b4cca148d5c89832f007ec0809d7e6d upstream.

The irq_of_parse_and_map() returns 0 on failure, not a negative ERRNO.

Reported-by: Lv Ruyi 
Fixes: caf6e49bf6d0 ("NFC: nfcmrvl: add spi driver")
Signed-off-by: Krzysztof Kozlowski 
Link: https://lore.kernel.org/r/20220627124048.296253-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

nfc: nfcmrvl: Fix memory leak in nfcmrvl_play_deferred

2022-06-25T09:45:17+00:00

[ Upstream commit 8a4d480702b71184fabcf379b80bf7539716752e ]

Similar to the handling of play_deferred in commit 19cfe912c37b
("Bluetooth: btusb: Fix memory leak in play_deferred"), we thought
a patch might be needed here as well.

Currently usb_submit_urb is called directly to submit deferred tx
urbs after unanchor them.

So the usb_giveback_urb_bh would failed to unref it in usb_unanchor_urb
and cause memory leak.

Put those urbs in tx_anchor to avoid the leak, and also fix the error
handling.

Signed-off-by: Xiaohui Zhang 
Acked-by: Krzysztof Kozlowski 
Link: https://lore.kernel.org/r/20220607083230.6182-1-xiaohuizhang@ruc.edu.cn
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

nfc: st21nfca: fix memory leaks in EVT_TRANSACTION handling

2022-06-14T14:52:41+00:00

commit 996419e0594abb311fb958553809f24f38e7abbe upstream.

Error paths do not free previously allocated memory. Add devm_kfree() to
those failure paths.

Fixes: 26fc6c7f02cb ("NFC: st21nfca: Add HCI transaction event support")
Fixes: 4fbcc1a4cb20 ("nfc: st21nfca: Fix potential buffer overflows in EVT_TRANSACTION")
Cc: stable@vger.kernel.org
Signed-off-by: Martin Faltesek 
Reviewed-by: Guenter Roeck 
Reviewed-by: Krzysztof Kozlowski 
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

nfc: st21nfca: fix incorrect validating logic in EVT_TRANSACTION

2022-06-14T14:52:41+00:00

commit 77e5fe8f176a525523ae091d6fd0fbb8834c156d upstream.

The first validation check for EVT_TRANSACTION has two different checks
tied together with logical AND. One is a check for minimum packet length,
and the other is for a valid aid_tag. If either condition is true (fails),
then an error should be triggered.  The fix is to change && to ||.

Fixes: 26fc6c7f02cb ("NFC: st21nfca: Add HCI transaction event support")
Cc: stable@vger.kernel.org
Signed-off-by: Martin Faltesek 
Reviewed-by: Guenter Roeck 
Reviewed-by: Krzysztof Kozlowski 
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

nfc: nfcmrvl: main: reorder destructive operations in nfcmrvl_nci_unregister_dev to avoid bugs

2022-05-12T10:14:57+00:00

commit d270453a0d9ec10bb8a802a142fb1b3601a83098 upstream.

There are destructive operations such as nfcmrvl_fw_dnld_abort and
gpio_free in nfcmrvl_nci_unregister_dev. The resources such as firmware,
gpio and so on could be destructed while the upper layer functions such as
nfcmrvl_fw_dnld_start and nfcmrvl_nci_recv_frame is executing, which leads
to double-free, use-after-free and null-ptr-deref bugs.

There are three situations that could lead to double-free bugs.

The first situation is shown below:

   (Thread 1)                 |      (Thread 2)
nfcmrvl_fw_dnld_start         |
 ...                          |  nfcmrvl_nci_unregister_dev
 release_firmware()           |   nfcmrvl_fw_dnld_abort
  kfree(fw) //(1)             |    fw_dnld_over
                              |     release_firmware
  ...                         |      kfree(fw) //(2)
                              |     ...

The second situation is shown below:

   (Thread 1)                 |      (Thread 2)
nfcmrvl_fw_dnld_start         |
 ...                          |
 mod_timer                    |
 (wait a time)                |
 fw_dnld_timeout              |  nfcmrvl_nci_unregister_dev
   fw_dnld_over               |   nfcmrvl_fw_dnld_abort
    release_firmware          |    fw_dnld_over
     kfree(fw) //(1)          |     release_firmware
     ...                      |      kfree(fw) //(2)

The third situation is shown below:

       (Thread 1)               |       (Thread 2)
nfcmrvl_nci_recv_frame          |
 if(..->fw_download_in_progress)|
  nfcmrvl_fw_dnld_recv_frame    |
   queue_work                   |
                                |
fw_dnld_rx_work                 | nfcmrvl_nci_unregister_dev
 fw_dnld_over                   |  nfcmrvl_fw_dnld_abort
  release_firmware              |   fw_dnld_over
   kfree(fw) //(1)              |    release_firmware
                                |     kfree(fw) //(2)

The firmware struct is deallocated in position (1) and deallocated
in position (2) again.

The crash trace triggered by POC is like below:

BUG: KASAN: double-free or invalid-free in fw_dnld_over
Call Trace:
  kfree
  fw_dnld_over
  nfcmrvl_nci_unregister_dev
  nci_uart_tty_close
  tty_ldisc_kill
  tty_ldisc_hangup
  __tty_hangup.part.0
  tty_release
  ...

What's more, there are also use-after-free and null-ptr-deref bugs
in nfcmrvl_fw_dnld_start. If we deallocate firmware struct, gpio or
set null to the members of priv->fw_dnld in nfcmrvl_nci_unregister_dev,
then, we dereference firmware, gpio or the members of priv->fw_dnld in
nfcmrvl_fw_dnld_start, the UAF or NPD bugs will happen.

This patch reorders destructive operations after nci_unregister_device
in order to synchronize between cleanup routine and firmware download
routine.

The nci_unregister_device is well synchronized. If the device is
detaching, the firmware download routine will goto error. If firmware
download routine is executing, nci_unregister_device will wait until
firmware download routine is finished.

Fixes: 3194c6870158 ("NFC: nfcmrvl: add firmware download support")
Signed-off-by: Duoming Zhou 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

nfc: st21nfca: Fix potential buffer overflows in EVT_TRANSACTION

2022-03-28T06:06:05+00:00

commit 4fbcc1a4cb20fe26ad0225679c536c80f1648221 upstream.

It appears that there are some buffer overflows in EVT_TRANSACTION.
This happens because the length parameters that are passed to memcpy
come directly from skb->data and are not guarded in any way.

Signed-off-by: Jordy Zomer 
Reviewed-by: Krzysztof Kozlowski 
Signed-off-by: David S. Miller 
Signed-off-by: Denis Efremov 
Signed-off-by: Greg Kroah-Hartman