linux-stable.git/drivers/net, branch v6.9.4

ipvlan: Dont Use skb->sk in ipvlan_process_v{4,6}_outbound

2024-06-12T09:39:56+00:00

[ Upstream commit b3dc6e8003b500861fa307e9a3400c52e78e4d3a ]

Raw packet from PF_PACKET socket ontop of an IPv6-backed ipvlan device will
hit WARN_ON_ONCE() in sk_mc_loop() through sch_direct_xmit() path.

WARNING: CPU: 2 PID: 0 at net/core/sock.c:775 sk_mc_loop+0x2d/0x70
Modules linked in: sch_netem ipvlan rfkill cirrus drm_shmem_helper sg drm_kms_helper
CPU: 2 PID: 0 Comm: swapper/2 Kdump: loaded Not tainted 6.9.0+ #279
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
RIP: 0010:sk_mc_loop+0x2d/0x70
Code: fa 0f 1f 44 00 00 65 0f b7 15 f7 96 a3 4f 31 c0 66 85 d2 75 26 48 85 ff 74 1c
RSP: 0018:ffffa9584015cd78 EFLAGS: 00010212
RAX: 0000000000000011 RBX: ffff91e585793e00 RCX: 0000000002c6a001
RDX: 0000000000000000 RSI: 0000000000000040 RDI: ffff91e589c0f000
RBP: ffff91e5855bd100 R08: 0000000000000000 R09: 3d00545216f43d00
R10: ffff91e584fdcc50 R11: 00000060dd8616f4 R12: ffff91e58132d000
R13: ffff91e584fdcc68 R14: ffff91e5869ce800 R15: ffff91e589c0f000
FS:  0000000000000000(0000) GS:ffff91e898100000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f788f7c44c0 CR3: 0000000008e1a000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:

 ? __warn (kernel/panic.c:693)
 ? sk_mc_loop (net/core/sock.c:760)
 ? report_bug (lib/bug.c:201 lib/bug.c:219)
 ? handle_bug (arch/x86/kernel/traps.c:239)
 ? exc_invalid_op (arch/x86/kernel/traps.c:260 (discriminator 1))
 ? asm_exc_invalid_op (./arch/x86/include/asm/idtentry.h:621)
 ? sk_mc_loop (net/core/sock.c:760)
 ip6_finish_output2 (net/ipv6/ip6_output.c:83 (discriminator 1))
 ? nf_hook_slow (net/netfilter/core.c:626)
 ip6_finish_output (net/ipv6/ip6_output.c:222)
 ? __pfx_ip6_finish_output (net/ipv6/ip6_output.c:215)
 ipvlan_xmit_mode_l3 (drivers/net/ipvlan/ipvlan_core.c:602) ipvlan
 ipvlan_start_xmit (drivers/net/ipvlan/ipvlan_main.c:226) ipvlan
 dev_hard_start_xmit (net/core/dev.c:3594)
 sch_direct_xmit (net/sched/sch_generic.c:343)
 __qdisc_run (net/sched/sch_generic.c:416)
 net_tx_action (net/core/dev.c:5286)
 handle_softirqs (kernel/softirq.c:555)
 __irq_exit_rcu (kernel/softirq.c:589)
 sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1043)

The warning triggers as this:
packet_sendmsg
   packet_snd //skb->sk is packet sk
      __dev_queue_xmit
         __dev_xmit_skb //q->enqueue is not NULL
             __qdisc_run
               sch_direct_xmit
                 dev_hard_start_xmit
                   ipvlan_start_xmit
                      ipvlan_xmit_mode_l3 //l3 mode
                        ipvlan_process_outbound //vepa flag
                          ipvlan_process_v6_outbound
                            ip6_local_out
                                __ip6_finish_output
                                  ip6_finish_output2 //multicast packet
                                    sk_mc_loop //sk->sk_family is AF_PACKET

Call ip{6}_local_out() with NULL sk in ipvlan as other tunnels to fix this.

Fixes: 2ad7bf363841 ("ipvlan: Initial check-in of the IPVLAN driver.")
Suggested-by: Eric Dumazet 
Signed-off-by: Yue Haibing 
Reviewed-by: Eric Dumazet 
Link: https://lore.kernel.org/r/20240529095633.613103-1-yuehaibing@huawei.com
Signed-off-by: Paolo Abeni 
Signed-off-by: Sasha Levin

net: ena: Fix redundant device NUMA node override

2024-06-12T09:39:55+00:00

[ Upstream commit 2dc8b1e7177d4f49f492ce648440caf2de0c3616 ]

The driver overrides the NUMA node id of the device regardless of
whether it knows its correct value (often setting it to -1 even though
the node id is advertised in 'struct device'). This can lead to
suboptimal configurations.

This patch fixes this behavior and makes the shared memory allocation
functions use the NUMA node id advertised by the underlying device.

Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Shay Agroskin 
Link: https://lore.kernel.org/r/20240528170912.1204417-1-shayagr@amazon.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

ice: fix 200G PHY types to link speed mapping

2024-06-12T09:39:55+00:00

[ Upstream commit 2a6d8f2de2224ac46df94dc40f43f8b9701f6703 ]

Commit 24407a01e57c ("ice: Add 200G speed/phy type use") added support
for 200G PHY speeds, but did not include the mapping of 200G PHY types
to link speed. As a result the driver is returning UNKNOWN link speed
when setting 200G ethtool advertised link modes.

To fix this add 200G PHY types to link speed mapping to
ice_get_link_speed_based_on_phy_type().

Fixes: 24407a01e57c ("ice: Add 200G speed/phy type use")
Reviewed-by: Michal Swiatkowski 
Signed-off-by: Paul Greenwalt 
Tested-by: Pucha Himasekhar Reddy 
Signed-off-by: Jacob Keller 
Link: https://lore.kernel.org/r/20240528-net-2024-05-28-intel-net-fixes-v1-5-dc8593d2bbc6@intel.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

net: dsa: microchip: fix RGMII error in KSZ DSA driver

2024-06-12T09:39:55+00:00

[ Upstream commit 278d65ccdadb5f0fa0ceaf7b9cc97b305cd72822 ]

The driver should return RMII interface when XMII is running in RMII mode.

Fixes: 0ab7f6bf1675 ("net: dsa: microchip: ksz9477: use common xmii function")
Signed-off-by: Tristram Ha 
Acked-by: Arun Ramadoss 
Acked-by: Jerry Ray 
Reviewed-by: Andrew Lunn 
Link: https://lore.kernel.org/r/1716932066-3342-1-git-send-email-Tristram.Ha@microchip.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

inet: introduce dst_rtable() helper

2024-06-12T09:39:55+00:00

[ Upstream commit 05d6d492097c55f2d153fc3fd33cbe78e1e28e0a ]

I added dst_rt6_info() in commit
e8dfd42c17fa ("ipv6: introduce dst_rt6_info() helper")

This patch does a similar change for IPv4.

Instead of (struct rtable *)dst casts, we can use :

 #define dst_rtable(_ptr) \
             container_of_const(_ptr, struct rtable, dst)

Patch is smaller than IPv6 one, because IPv4 has skb_rtable() helper.

Signed-off-by: Eric Dumazet 
Reviewed-by: David Ahern 
Reviewed-by: Sabrina Dubroca 
Link: https://lore.kernel.org/r/20240429133009.1227754-1-edumazet@google.com
Signed-off-by: Jakub Kicinski 
Stable-dep-of: 92f1655aa2b2 ("net: fix __dst_negative_advice() race")
Signed-off-by: Sasha Levin

ipv6: introduce dst_rt6_info() helper

2024-06-12T09:39:54+00:00

[ Upstream commit e8dfd42c17faf183415323db1ef0c977be0d6489 ]

Instead of (struct rt6_info *)dst casts, we can use :

 #define dst_rt6_info(_ptr) \
         container_of_const(_ptr, struct rt6_info, dst)

Some places needed missing const qualifiers :

ip6_confirm_neigh(), ipv6_anycast_destination(),
ipv6_unicast_destination(), has_gateway()

v2: added missing parts (David Ahern)

Signed-off-by: Eric Dumazet 
Reviewed-by: David Ahern 
Signed-off-by: David S. Miller 
Stable-dep-of: 92f1655aa2b2 ("net: fix __dst_negative_advice() race")
Signed-off-by: Sasha Levin

net: ti: icssg-prueth: Fix start counter for ft1 filter

2024-06-12T09:39:53+00:00

[ Upstream commit 56a5cf538c3f2d935b0d81040a8303b6e7fc5fd8 ]

The start counter for FT1 filter is wrongly set to 0 in the driver.
FT1 is used for source address violation (SAV) check and source address
starts at Byte 6 not Byte 0. Fix this by changing start counter to
ETH_ALEN in icssg_ft1_set_mac_addr().

Fixes: e9b4ece7d74b ("net: ti: icssg-prueth: Add Firmware config and classification APIs.")
Signed-off-by: MD Danish Anwar 
Link: https://lore.kernel.org/r/20240527063015.263748-1-danishanwar@ti.com
Signed-off-by: Paolo Abeni 
Signed-off-by: Sasha Levin

ice: fix accounting if a VLAN already exists

2024-06-12T09:39:51+00:00

[ Upstream commit 82617b9a04649e83ee8731918aeadbb6e6d7cbc7 ]

The ice_vsi_add_vlan() function is used to add a VLAN filter for the target
VSI. This function prepares a filter in the switch table for the given VSI.
If it succeeds, the vsi->num_vlan counter is incremented.

It is not considered an error to add a VLAN which already exists in the
switch table, so the function explicitly checks and ignores -EEXIST. The
vsi->num_vlan counter is still incremented.

This seems incorrect, as it means we can double-count in the case where the
same VLAN is added twice by the caller. The actual table will have one less
filter than the count.

The ice_vsi_del_vlan() function similarly checks and handles the -ENOENT
condition for when deleting a filter that doesn't exist. This flow only
decrements the vsi->num_vlan if it actually deleted a filter.

The vsi->num_vlan counter is used only in a few places, primarily related
to tracking the number of non-zero VLANs. If the vsi->num_vlans gets out of
sync, then ice_vsi_num_non_zero_vlans() will incorrectly report more VLANs
than are present, and ice_vsi_has_non_zero_vlans() could return true
potentially in cases where there are only VLAN 0 filters left.

Fix this by only incrementing the vsi->num_vlan in the case where we
actually added an entry, and not in the case where the entry already
existed.

Fixes: a1ffafb0b4a4 ("ice: Support configuring the device to Double VLAN Mode")
Signed-off-by: Jacob Keller 
Tested-by: Pucha Himasekhar Reddy 
Reviewed-by: Simon Horman 
Link: https://lore.kernel.org/r/20240523-net-2024-05-23-intel-net-fixes-v1-2-17a923e0bb5f@intel.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

idpf: don't enable NAPI and interrupts prior to allocating Rx buffers

2024-06-12T09:39:51+00:00

[ Upstream commit d514c8b54209de7a95ab37259fe32c7406976bd9 ]

Currently, idpf enables NAPI and interrupts prior to allocating Rx
buffers.
This may lead to frame loss (there are no buffers to place incoming
frames) and even crashes on quick ifup-ifdown. Interrupts must be
enabled only after all the resources are here and available.
Split interrupt init into two phases: initialization and enabling,
and perform the second only after the queues are fully initialized.
Note that we can't just move interrupt initialization down the init
process, as the queues must have correct a ::q_vector pointer set
and NAPI already added in order to allocate buffers correctly.
Also, during the deinit process, disable HW interrupts first and
only then disable NAPI. Otherwise, there can be a HW event leading
to napi_schedule(), but the NAPI will already be unavailable.

Fixes: d4d558718266 ("idpf: initialize interrupts and enable vport")
Reported-by: Michal Kubiak 
Reviewed-by: Wojciech Drewek 
Signed-off-by: Alexander Lobakin 
Reviewed-by: Simon Horman 
Tested-by: Krishneil Singh 
Signed-off-by: Jacob Keller 
Link: https://lore.kernel.org/r/20240523-net-2024-05-23-intel-net-fixes-v1-1-17a923e0bb5f@intel.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

net: micrel: Fix lan8841_config_intr after getting out of sleep mode

2024-06-12T09:39:50+00:00

[ Upstream commit 4fb679040d9f758eeb3b4d01bbde6405bf20e64e ]

When the interrupt is enabled, the function lan8841_config_intr tries to
clear any pending interrupts by reading the interrupt status, then
checks the return value for errors and then continue to enable the
interrupt. It has been seen that once the system gets out of sleep mode,
the interrupt status has the value 0x400 meaning that the PHY detected
that the link was in low power. That is correct value but the problem is
that the check is wrong.  We try to check for errors but we return an
error also in this case which is not an error. Therefore fix this by
returning only when there is an error.

Fixes: a8f1a19d27ef ("net: micrel: Add support for lan8841 PHY")
Signed-off-by: Horatiu Vultur 
Reviewed-by: Suman Ghosh 
Reviewed-by: Andrew Lunn 
Reviewed-by: Russell King (Oracle) 
Link: https://lore.kernel.org/r/20240524085350.359812-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin