linux-stable.git/drivers/net, branch v6.5.7

net: lan743x: also select PHYLIB

2023-10-10T20:03:04+00:00

[ Upstream commit 566aeed6871ac2189b5bfe03e1a5b3b7be5eca38 ]

Since FIXED_PHY depends on PHYLIB, PHYLIB needs to be set to avoid
a kconfig warning:

WARNING: unmet direct dependencies detected for FIXED_PHY
  Depends on [n]: NETDEVICES [=y] && PHYLIB [=n]
  Selected by [y]:
  - LAN743X [=y] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_MICROCHIP [=y] && PCI [=y] && PTP_1588_CLOCK_OPTIONAL [=y]

Fixes: 73c4d1b307ae ("net: lan743x: select FIXED_PHY")
Signed-off-by: Randy Dunlap 
Reported-by: kernel test robot 
Closes: lore.kernel.org/r/202309261802.JPbRHwti-lkp@intel.com
Cc: Bryan Whitehead 
Cc: UNGLinuxDriver@microchip.com
Reviewed-by: Simon Horman 
Tested-by: Simon Horman  # build-tested
Link: https://lore.kernel.org/r/20231002193544.14529-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

net: mana: Fix oversized sge0 for GSO packets

2023-10-10T20:03:04+00:00

[ Upstream commit a43e8e9ffa0d1de058964edf1a0622cbb7e27cfe ]

Handle the case when GSO SKB linear length is too large.

MANA NIC requires GSO packets to put only the header part to SGE0,
otherwise the TX queue may stop at the HW level.

So, use 2 SGEs for the skb linear part which contains more than the
packet header.

Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)")
Signed-off-by: Haiyang Zhang 
Reviewed-by: Simon Horman 
Reviewed-by: Shradha Gupta 
Signed-off-by: Paolo Abeni 
Signed-off-by: Sasha Levin

net: mana: Fix the tso_bytes calculation

2023-10-10T20:03:03+00:00

commit 7a54de92657455210d0ca71d4176b553952c871a upstream.

sizeof(struct hop_jumbo_hdr) is not part of tso_bytes, so remove
the subtraction from header size.

Cc: stable@vger.kernel.org
Fixes: bd7fc6e1957c ("net: mana: Add new MANA VF performance counters for easier troubleshooting")
Signed-off-by: Haiyang Zhang 
Reviewed-by: Simon Horman 
Reviewed-by: Shradha Gupta 
Signed-off-by: Paolo Abeni 
Stable-dep-of: a43e8e9ffa0d ("net: mana: Fix oversized sge0 for GSO packets")
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

net: stmmac: dwmac-stm32: fix resume on STM32 MCU

2023-10-10T20:03:03+00:00

[ Upstream commit 6f195d6b0da3b689922ba9e302af2f49592fa9fc ]

The STM32MP1 keeps clk_rx enabled during suspend, and therefore the
driver does not enable the clock in stm32_dwmac_init() if the device was
suspended. The problem is that this same code runs on STM32 MCUs, which
do disable clk_rx during suspend, causing the clock to never be
re-enabled on resume.

This patch adds a variant flag to indicate that clk_rx remains enabled
during suspend, and uses this to decide whether to enable the clock in
stm32_dwmac_init() if the device was suspended.

This approach fixes this specific bug with limited opportunity for
unintended side-effects, but I have a follow up patch that will refactor
the clock configuration and hopefully make it less error prone.

Fixes: 6528e02cc9ff ("net: ethernet: stmmac: add adaptation for stm32mp157c.")
Signed-off-by: Ben Wolsieffer 
Reviewed-by: Jacob Keller 
Link: https://lore.kernel.org/r/20230927175749.1419774-1-ben.wolsieffer@hefring.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

ibmveth: Remove condition to recompute TCP header checksum.

2023-10-10T20:03:02+00:00

[ Upstream commit 51e7a66666e0ca9642c59464ef8359f0ac604d41 ]

In some OVS environments the TCP pseudo header checksum may need to be
recomputed. Currently this is only done when the interface instance is
configured for "Trunk Mode". We found the issue also occurs in some
Kubernetes environments, these environments do not use "Trunk Mode",
therefor the condition is removed.

Performance tests with this change show only a fractional decrease in
throughput (< 0.2%).

Fixes: 7525de2516fb ("ibmveth: Set CHECKSUM_PARTIAL if NULL TCP CSUM.")
Signed-off-by: David Wilder 
Reviewed-by: Nick Child 
Reviewed-by: Jacob Keller 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

net: ethernet: ti: am65-cpsw: Fix error code in am65_cpsw_nuss_init_tx_chns()

2023-10-10T20:03:02+00:00

[ Upstream commit 37d4f55567982e445f86dc0ff4ecfa72921abfe8 ]

This accidentally returns success, but it should return a negative error
code.

Fixes: 93a76530316a ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver")
Signed-off-by: Dan Carpenter 
Reviewed-by: Roger Quadros 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

rswitch: Fix PHY station management clock setting

2023-10-10T20:03:02+00:00

[ Upstream commit a0c55bba0d0d0b5591083f65f830940d8ae63f31 ]

Fix the MPIC.PSMCS value following the programming example in the
section 6.4.2 Management Data Clock (MDC) Setting, Ethernet MAC IP,
S4 Hardware User Manual Rev.1.00.

The value is calculated by
    MPIC.PSMCS = clk[MHz] / (MDC frequency[MHz] * 2) - 1
with the input clock frequency from clk_get_rate() and MDC frequency
of 2.5MHz. Otherwise, this driver cannot communicate PHYs on the R-Car
S4 Starter Kit board.

Fixes: 3590918b5d07 ("net: ethernet: renesas: Add support for "Ethernet Switch"")
Reported-by: Tam Nguyen 
Signed-off-by: Yoshihiro Shimoda 
Tested-by: Kuninori Morimoto 
Reviewed-by: Andrew Lunn 
Link: https://lore.kernel.org/r/20230926123054.3976752-1-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

net: renesas: rswitch: Add spin lock protection for irq {un}mask

2023-10-10T20:03:02+00:00

[ Upstream commit c4f922e86c8e0f7c5fe94e0547e9835fc9711f08 ]

Add spin lock protection for irq {un}mask registers' control.

After napi_complete_done() and this protection were applied,
a lot of redundant interrupts no longer occur.

For example: when "iperf3 -c  -R" on R-Car S4-8 Spider
 Before the patches are applied: about 800,000 times happened
 After the patches were applied: about 100,000 times happened

Fixes: 3590918b5d07 ("net: ethernet: renesas: Add support for "Ethernet Switch"")
Signed-off-by: Yoshihiro Shimoda 
Reviewed-by: Simon Horman 
Signed-off-by: Paolo Abeni 
Stable-dep-of: a0c55bba0d0d ("rswitch: Fix PHY station management clock setting")
Signed-off-by: Sasha Levin

net: usb: smsc75xx: Fix uninit-value access in __smsc75xx_read_reg

2023-10-10T20:03:02+00:00

[ Upstream commit e9c65989920f7c28775ec4e0c11b483910fb67b8 ]

syzbot reported the following uninit-value access issue:

=====================================================
BUG: KMSAN: uninit-value in smsc75xx_wait_ready drivers/net/usb/smsc75xx.c:975 [inline]
BUG: KMSAN: uninit-value in smsc75xx_bind+0x5c9/0x11e0 drivers/net/usb/smsc75xx.c:1482
CPU: 0 PID: 8696 Comm: kworker/0:3 Not tainted 5.8.0-rc5-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: usb_hub_wq hub_event
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x21c/0x280 lib/dump_stack.c:118
 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:121
 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215
 smsc75xx_wait_ready drivers/net/usb/smsc75xx.c:975 [inline]
 smsc75xx_bind+0x5c9/0x11e0 drivers/net/usb/smsc75xx.c:1482
 usbnet_probe+0x1152/0x3f90 drivers/net/usb/usbnet.c:1737
 usb_probe_interface+0xece/0x1550 drivers/usb/core/driver.c:374
 really_probe+0xf20/0x20b0 drivers/base/dd.c:529
 driver_probe_device+0x293/0x390 drivers/base/dd.c:701
 __device_attach_driver+0x63f/0x830 drivers/base/dd.c:807
 bus_for_each_drv+0x2ca/0x3f0 drivers/base/bus.c:431
 __device_attach+0x4e2/0x7f0 drivers/base/dd.c:873
 device_initial_probe+0x4a/0x60 drivers/base/dd.c:920
 bus_probe_device+0x177/0x3d0 drivers/base/bus.c:491
 device_add+0x3b0e/0x40d0 drivers/base/core.c:2680
 usb_set_configuration+0x380f/0x3f10 drivers/usb/core/message.c:2032
 usb_generic_driver_probe+0x138/0x300 drivers/usb/core/generic.c:241
 usb_probe_device+0x311/0x490 drivers/usb/core/driver.c:272
 really_probe+0xf20/0x20b0 drivers/base/dd.c:529
 driver_probe_device+0x293/0x390 drivers/base/dd.c:701
 __device_attach_driver+0x63f/0x830 drivers/base/dd.c:807
 bus_for_each_drv+0x2ca/0x3f0 drivers/base/bus.c:431
 __device_attach+0x4e2/0x7f0 drivers/base/dd.c:873
 device_initial_probe+0x4a/0x60 drivers/base/dd.c:920
 bus_probe_device+0x177/0x3d0 drivers/base/bus.c:491
 device_add+0x3b0e/0x40d0 drivers/base/core.c:2680
 usb_new_device+0x1bd4/0x2a30 drivers/usb/core/hub.c:2554
 hub_port_connect drivers/usb/core/hub.c:5208 [inline]
 hub_port_connect_change drivers/usb/core/hub.c:5348 [inline]
 port_event drivers/usb/core/hub.c:5494 [inline]
 hub_event+0x5e7b/0x8a70 drivers/usb/core/hub.c:5576
 process_one_work+0x1688/0x2140 kernel/workqueue.c:2269
 worker_thread+0x10bc/0x2730 kernel/workqueue.c:2415
 kthread+0x551/0x590 kernel/kthread.c:292
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:293

Local variable ----buf.i87@smsc75xx_bind created at:
 __smsc75xx_read_reg drivers/net/usb/smsc75xx.c:83 [inline]
 smsc75xx_wait_ready drivers/net/usb/smsc75xx.c:968 [inline]
 smsc75xx_bind+0x485/0x11e0 drivers/net/usb/smsc75xx.c:1482
 __smsc75xx_read_reg drivers/net/usb/smsc75xx.c:83 [inline]
 smsc75xx_wait_ready drivers/net/usb/smsc75xx.c:968 [inline]
 smsc75xx_bind+0x485/0x11e0 drivers/net/usb/smsc75xx.c:1482

This issue is caused because usbnet_read_cmd() reads less bytes than requested
(zero byte in the reproducer). In this case, 'buf' is not properly filled.

This patch fixes the issue by returning -ENODATA if usbnet_read_cmd() reads
less bytes than requested.

Fixes: d0cad871703b ("smsc75xx: SMSC LAN75xx USB gigabit ethernet adapter driver")
Reported-and-tested-by: syzbot+6966546b78d050bb0b5d@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=6966546b78d050bb0b5d
Signed-off-by: Shigeru Yoshida 
Reviewed-by: Simon Horman 
Link: https://lore.kernel.org/r/20230923173549.3284502-1-syoshida@redhat.com
Signed-off-by: Paolo Abeni 
Signed-off-by: Sasha Levin

net: dsa: mv88e6xxx: Avoid EEPROM timeout when EEPROM is absent

2023-10-10T20:03:01+00:00

[ Upstream commit 6ccf50d4d4741e064ba35511a95402c63bbe21a8 ]

Since commit 23d775f12dcd ("net: dsa: mv88e6xxx: Wait for EEPROM done
before HW reset") the following error is seen on a imx8mn board with
a 88E6320 switch:

mv88e6085 30be0000.ethernet-1:00: Timeout waiting for EEPROM done

This board does not have an EEPROM attached to the switch though.

This problem is well explained by Andrew Lunn:

"If there is an EEPROM, and the EEPROM contains a lot of data, it could
be that when we perform a hardware reset towards the end of probe, it
interrupts an I2C bus transaction, leaving the I2C bus in a bad state,
and future reads of the EEPROM do not work.

The work around for this was to poll the EEInt status and wait for it
to go true before performing the hardware reset.

However, we have discovered that for some boards which do not have an
EEPROM, EEInt never indicates complete. As a result,
mv88e6xxx_g1_wait_eeprom_done() spins for a second and then prints a
warning.

We probably need a different solution than calling
mv88e6xxx_g1_wait_eeprom_done(). The datasheet for 6352 documents the
EEPROM Command register:

bit 15 is:

  EEPROM Unit Busy. This bit must be set to a one to start an EEPROM
  operation (see EEOp below). Only one EEPROM operation can be
  executing at one time so this bit must be zero before setting it to
  a one.  When the requested EEPROM operation completes this bit will
  automatically be cleared to a zero. The transition of this bit from
  a one to a zero can be used to generate an interrupt (the EEInt in
  Global 1, offset 0x00).

and more interesting is bit 11:

  Register Loader Running. This bit is set to one whenever the
  register loader is busy executing instructions contained in the
  EEPROM."

Change to using mv88e6xxx_g2_eeprom_wait() to fix the timeout error
when the EEPROM chip is not present.

Fixes: 23d775f12dcd ("net: dsa: mv88e6xxx: Wait for EEPROM done before HW reset")
Suggested-by: Andrew Lunn 
Signed-off-by: Fabio Estevam 
Reviewed-by: Florian Fainelli 
Reviewed-by: Andrew Lunn 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin