linux-stable.git/drivers/net, branch v6.2.9

igb: revert rtnl_lock() that causes deadlock

2023-03-30T10:51:35+00:00

commit 65f69851e44d71248b952a687e44759a7abb5016 upstream.

The commit 6faee3d4ee8b ("igb: Add lock to avoid data race") adds
rtnl_lock to eliminate a false data race shown below

 (FREE from device detaching)      |   (USE from netdev core)
igb_remove                         |  igb_ndo_get_vf_config
 igb_disable_sriov                 |  vf >= adapter->vfs_allocated_count?
  kfree(adapter->vf_data)          |
  adapter->vfs_allocated_count = 0 |
                                   |    memcpy(... adapter->vf_data[vf]

The above race will never happen and the extra rtnl_lock causes deadlock
below

[  141.420169]  
[  141.420672]  __schedule+0x2dd/0x840
[  141.421427]  schedule+0x50/0xc0
[  141.422041]  schedule_preempt_disabled+0x11/0x20
[  141.422678]  __mutex_lock.isra.13+0x431/0x6b0
[  141.423324]  unregister_netdev+0xe/0x20
[  141.423578]  igbvf_remove+0x45/0xe0 [igbvf]
[  141.423791]  pci_device_remove+0x36/0xb0
[  141.423990]  device_release_driver_internal+0xc1/0x160
[  141.424270]  pci_stop_bus_device+0x6d/0x90
[  141.424507]  pci_stop_and_remove_bus_device+0xe/0x20
[  141.424789]  pci_iov_remove_virtfn+0xba/0x120
[  141.425452]  sriov_disable+0x2f/0xf0
[  141.425679]  igb_disable_sriov+0x4e/0x100 [igb]
[  141.426353]  igb_remove+0xa0/0x130 [igb]
[  141.426599]  pci_device_remove+0x36/0xb0
[  141.426796]  device_release_driver_internal+0xc1/0x160
[  141.427060]  driver_detach+0x44/0x90
[  141.427253]  bus_remove_driver+0x55/0xe0
[  141.427477]  pci_unregister_driver+0x2a/0xa0
[  141.428296]  __x64_sys_delete_module+0x141/0x2b0
[  141.429126]  ? mntput_no_expire+0x4a/0x240
[  141.429363]  ? syscall_trace_enter.isra.19+0x126/0x1a0
[  141.429653]  do_syscall_64+0x5b/0x80
[  141.429847]  ? exit_to_user_mode_prepare+0x14d/0x1c0
[  141.430109]  ? syscall_exit_to_user_mode+0x12/0x30
[  141.430849]  ? do_syscall_64+0x67/0x80
[  141.431083]  ? syscall_exit_to_user_mode_prepare+0x183/0x1b0
[  141.431770]  ? syscall_exit_to_user_mode+0x12/0x30
[  141.432482]  ? do_syscall_64+0x67/0x80
[  141.432714]  ? exc_page_fault+0x64/0x140
[  141.432911]  entry_SYSCALL_64_after_hwframe+0x72/0xdc

Since the igb_disable_sriov() will call pci_disable_sriov() before
releasing any resources, the netdev core will synchronize the cleanup to
avoid any races. This patch removes the useless rtnl_(un)lock to guarantee
correctness.

CC: stable@vger.kernel.org
Fixes: 6faee3d4ee8b ("igb: Add lock to avoid data race")
Reported-by: Corinna Vinschen 
Link: https://lore.kernel.org/intel-wired-lan/ZAcJvkEPqWeJHO2r@calimero.vinschen.de/
Signed-off-by: Lin Ma 
Tested-by: Corinna Vinschen 
Reviewed-by: Jacob Keller 
Reviewed-by: Simon Horman 
Tested-by: Rafal Romanowski 
Signed-off-by: Tony Nguyen 
Signed-off-by: Greg Kroah-Hartman

net: usb: qmi_wwan: add Telit 0x1080 composition

2023-03-30T10:51:30+00:00

[ Upstream commit 382e363d5bed0cec5807b35761d14e55955eee63 ]

Add the following Telit FE990 composition:

0x1080: tty, adb, rmnet, tty, tty, tty, tty

Signed-off-by: Enrico Sau 
Link: https://lore.kernel.org/r/20230306120528.198842-1-enrico.sau@gmail.com
Signed-off-by: Paolo Abeni 
Signed-off-by: Sasha Levin

net: usb: cdc_mbim: avoid altsetting toggling for Telit FE990

2023-03-30T10:51:30+00:00

[ Upstream commit 418383e6ed6b4624a54ec05c535f13d184fbf33b ]

Add quirk CDC_MBIM_FLAG_AVOID_ALTSETTING_TOGGLE for Telit FE990
0x1081 composition in order to avoid bind error.

Signed-off-by: Enrico Sau 
Link: https://lore.kernel.org/r/20230306115933.198259-1-enrico.sau@gmail.com
Signed-off-by: Paolo Abeni 
Signed-off-by: Sasha Levin

cpumask: fix incorrect cpumask scanning result checks

2023-03-30T10:51:28+00:00

[ Upstream commit 8ca09d5fa3549d142c2080a72a4c70ce389163cd ]

It turns out that commit 596ff4a09b89 ("cpumask: re-introduce
constant-sized cpumask optimizations") exposed a number of cases of
drivers not checking the result of "cpumask_next()" and friends
correctly.

The documented correct check for "no more cpus in the cpumask" is to
check for the result being equal or larger than the number of possible
CPU ids, exactly _because_ we've always done those constant-sized
cpumask scans using a widened type before.  So the return value of a
cpumask scan should be checked with

	if (cpu >= nr_cpu_ids)
		...

because the cpumask scan did not necessarily stop exactly *at* that
maximum CPU id.

But a few cases ended up instead using checks like

	if (cpu == nr_cpumask_bits)
		...

which used that internal "widened" number of bits.  And that used to
work pretty much by accident (ok, in this case "by accident" is simply
because it matched the historical internal implementation of the cpumask
scanning, so it was more of a "intentionally using implementation
details rather than an accident").

But the extended constant-sized optimizations then did that internal
implementation differently, and now that code that did things wrong but
matched the old implementation no longer worked at all.

Which then causes subsequent odd problems due to using what ends up
being an invalid CPU ID.

Most of these cases require either unusual hardware or special uses to
hit, but the random.c one triggers quite easily.

All you really need is to have a sufficiently small CONFIG_NR_CPUS value
for the bit scanning optimization to be triggered, but not enough CPUs
to then actually fill that widened cpumask.  At that point, the cpumask
scanning will return the NR_CPUS constant, which is _not_ the same as
nr_cpumask_bits.

This just does the mindless fix with

   sed -i 's/== nr_cpumask_bits/>= nr_cpu_ids/'

to fix the incorrect uses.

The ones in the SCSI lpfc driver in particular could probably be fixed
more cleanly by just removing that repeated pattern entirely, but I am
not emptionally invested enough in that driver to care.

Reported-and-tested-by: Guenter Roeck 
Link: https://lore.kernel.org/lkml/481b19b5-83a0-4793-b4fd-194ad7b978c3@roeck-us.net/
Reported-and-tested-by: Geert Uytterhoeven 
Link: https://lore.kernel.org/lkml/CAMuHMdUKo_Sf7TjKzcNDa8Ve+6QrK+P8nSQrSQ=6LTRmcBKNww@mail.gmail.com/
Reported-by: Vernon Yang 
Link: https://lore.kernel.org/lkml/20230306160651.2016767-1-vernon2gm@gmail.com/
Cc: Yury Norov 
Cc: Jason A. Donenfeld 
Signed-off-by: Linus Torvalds 
Signed-off-by: Sasha Levin

ca8210: fix mac_len negative array access

2023-03-30T10:51:27+00:00

[ Upstream commit 6c993779ea1d0cccdb3a5d7d45446dd229e610a3 ]

This patch fixes a buffer overflow access of skb->data if
ieee802154_hdr_peek_addrs() fails.

Reported-by: lianhui tang 
Signed-off-by: Alexander Aring 
Link: https://lore.kernel.org/r/20230217042504.3303396-1-aahringo@redhat.com
Signed-off-by: Stefan Schmidt 
Signed-off-by: Sasha Levin

net: mdio: thunder: Add missing fwnode_handle_put()

2023-03-30T10:51:23+00:00

[ Upstream commit b1de5c78ebe9858ccec9d49af2f76724f1d47e3e ]

In device_for_each_child_node(), we should add fwnode_handle_put()
when break out of the iteration device_for_each_child_node()
as it will automatically increase and decrease the refcounter.

Fixes: 379d7ac7ca31 ("phy: mdio-thunder: Add driver for Cavium Thunder SoC MDIO buses.")
Signed-off-by: Liang He 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

net: dsa: mt7530: move setting ssc_delta to PHY_INTERFACE_MODE_TRGMII case

2023-03-30T10:51:22+00:00

[ Upstream commit 407b508bdd70b6848993843d96ed49ac4108fb52 ]

Move setting the ssc_delta variable to under the PHY_INTERFACE_MODE_TRGMII
case as it's only needed when trgmii is used.

Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Signed-off-by: Arınç ÜNAL 
Link: https://lore.kernel.org/r/20230320190520.124513-3-arinc.unal@arinc9.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

net: dsa: mt7530: move lowering TRGMII driving to mt7530_setup()

2023-03-30T10:51:22+00:00

[ Upstream commit fdcc8ccd823740c18e803b886cec461bc0e64201 ]

Move lowering the TRGMII Tx clock driving to mt7530_setup(), after setting
the core clock, as seen on the U-Boot MediaTek ethernet driver.

Move the code which looks like it lowers the TRGMII Rx clock driving to
after the TRGMII Tx clock driving is lowered. This is run after lowering
the Tx clock driving on the U-Boot MediaTek ethernet driver as well.

This way, the switch should consume less power regardless of port 6 being
used.

Update the comment explaining mt7530_pad_clk_setup().

Tested rgmii and trgmii modes of port 6 and rgmii mode of port 5 on MCM
MT7530 on MT7621AT Unielec U7621-06 and standalone MT7530 on MT7623NI
Bananapi BPI-R2.

Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Link: https://source.denx.de/u-boot/u-boot/-/blob/29a48bf9ccba45a5e560bb564bbe76e42629325f/drivers/net/mtk_eth.c#L682
Tested-by: Arınç ÜNAL 
Signed-off-by: Arınç ÜNAL 
Link: https://lore.kernel.org/r/20230320190520.124513-2-arinc.unal@arinc9.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

net: dsa: mt7530: move enabling disabling core clock to mt7530_pll_setup()

2023-03-30T10:51:22+00:00

[ Upstream commit 8f058a6ef99f0b88a177b58cc46a44ff5112e40a ]

Split the code that enables and disables TRGMII clocks and core clock.
Move enabling and disabling core clock to mt7530_pll_setup() as it's
supposed to be run there.

Add 20 ms delay before enabling the core clock as seen on the U-Boot
MediaTek ethernet driver.

Change the comment for enabling and disabling TRGMII clocks as the code
seems to affect both TXC and RXC.

Tested rgmii and trgmii modes of port 6 and rgmii mode of port 5 on MCM
MT7530 on MT7621AT Unielec U7621-06 and standalone MT7530 on MT7623NI
Bananapi BPI-R2.

Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Link: https://source.denx.de/u-boot/u-boot/-/blob/29a48bf9ccba45a5e560bb564bbe76e42629325f/drivers/net/mtk_eth.c#L589
Tested-by: Arınç ÜNAL 
Signed-off-by: Arınç ÜNAL 
Link: https://lore.kernel.org/r/20230320190520.124513-1-arinc.unal@arinc9.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

net: asix: fix modprobe "sysfs: cannot create duplicate filename"

2023-03-30T10:51:22+00:00

[ Upstream commit 8eac0095de355ee31e1b014f79f83d2cd62a2d04 ]

"modprobe asix ; rmmod asix ; modprobe asix" fails with:
   sysfs: cannot create duplicate filename \
   	'/devices/virtual/mdio_bus/usb-003:004'

Issue was originally reported by Anton Lundin on 2022-06-22 (link below).

Chrome OS team hit the same issue in Feb, 2023 when trying to find
work arounds for other issues with AX88172 devices.

The use of devm_mdiobus_register() with usbnet devices results in the
MDIO data being associated with the USB device. When the asix driver
is unloaded, the USB device continues to exist and the corresponding
"mdiobus_unregister()" is NOT called until the USB device is unplugged
or unauthorized. So the next "modprobe asix" will fail because the MDIO
phy sysfs attributes still exist.

The 'easy' (from a design PoV) fix is to use the non-devm variants of
mdiobus_* functions and explicitly manage this use in the asix_bind
and asix_unbind function calls. I've not explored trying to fix usbnet
initialization so devm_* stuff will work.

Fixes: e532a096be0e5 ("net: usb: asix: ax88772: add phylib support")
Reported-by: Anton Lundin 
Link: https://lore.kernel.org/netdev/20220623063649.GD23685@pengutronix.de/T/
Tested-by: Eizan Miyamoto 
Signed-off-by: Grant Grundler 
Link: https://lore.kernel.org/r/20230321170539.732147-1-grundler@chromium.org
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin