linux-stable.git/drivers/net, branch v6.1.82 Linux kernel stable tree nfp: flower: add hardware offload check for post ct entry 2024-03-15T14:48:19+00:00 Hui Zhou hui.zhou@corigine.com 2024-01-24T15:19:08+00:00 b0b89b470a863fb84360a89365ee69612d2863b5 [ Upstream commit cefa98e806fd4e2a5e2047457a11ae5f17b8f621 ] The nfp offload flow pay will not allocate a mask id when the out port is openvswitch internal port. This is because these flows are used to configure the pre_tun table and are never actually send to the firmware as an add-flow message. When a tc rule which action contains ct and the post ct entry's out port is openvswitch internal port, the merge offload flow pay with the wrong mask id of 0 will be send to the firmware. Actually, the nfp can not support hardware offload for this situation, so return EOPNOTSUPP. Fixes: bd0fe7f96a3c ("nfp: flower-ct: add zone table entry when handling pre/post_ct flows") CC: stable@vger.kernel.org # 5.14+ Signed-off-by: Hui Zhou <hui.zhou@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Link: https://lore.kernel.org/r/20240124151909.31603-2-louis.peens@corigine.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit cefa98e806fd4e2a5e2047457a11ae5f17b8f621 ]

The nfp offload flow pay will not allocate a mask id when the out port
is openvswitch internal port. This is because these flows are used to
configure the pre_tun table and are never actually send to the firmware
as an add-flow message. When a tc rule which action contains ct and
the post ct entry's out port is openvswitch internal port, the merge
offload flow pay with the wrong mask id of 0 will be send to the
firmware. Actually, the nfp can not support hardware offload for this
situation, so return EOPNOTSUPP.

Fixes: bd0fe7f96a3c ("nfp: flower-ct: add zone table entry when handling pre/post_ct flows")
CC: stable@vger.kernel.org # 5.14+
Signed-off-by: Hui Zhou <hui.zhou@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Link: https://lore.kernel.org/r/20240124151909.31603-2-louis.peens@corigine.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
nfp: flower: add goto_chain_index for ct entry 2024-03-15T14:48:19+00:00 Wentao Jia wentao.jia@corigine.com 2023-03-14T06:36:08+00:00 4e2f0cae0bfe60d99e733cddf98de017a482975f [ Upstream commit 3e44d19934b92398785b3ffc2353b9eba264140e ] The chain_index has different means in pre ct entry and post ct entry. In pre ct entry, it means chain index, but in post ct entry, it means goto chain index, it is confused. chain_index and goto_chain_index may be present in one flow rule, It cannot be distinguished by one field chain_index, both chain_index and goto_chain_index are required in the follow-up patch to support multiple ct zones Another field goto_chain_index is added to record the goto chain index. If no goto action in post ct entry, goto_chain_index is 0. Signed-off-by: Wentao Jia <wentao.jia@corigine.com> Acked-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: cefa98e806fd ("nfp: flower: add hardware offload check for post ct entry") Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 3e44d19934b92398785b3ffc2353b9eba264140e ]

The chain_index has different means in pre ct entry and post ct entry.
In pre ct entry, it means chain index, but in post ct entry, it means
goto chain index, it is confused.

chain_index and goto_chain_index may be present in one flow rule, It
cannot be distinguished by one field chain_index, both chain_index
and goto_chain_index are required in the follow-up patch to support
multiple ct zones

Another field goto_chain_index is added to record the goto chain index.
If no goto action in post ct entry, goto_chain_index is 0.

Signed-off-by: Wentao Jia <wentao.jia@corigine.com>
Acked-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: cefa98e806fd ("nfp: flower: add hardware offload check for post ct entry")
Signed-off-by: Sasha Levin <sashal@kernel.org>
net: dsa: microchip: fix register write order in ksz8_ind_write8() 2024-03-15T14:48:15+00:00 Tobias Jakobi (Compleo) tobias.jakobi.compleo@gmail.com 2024-03-04T15:41:35+00:00 7faff12e828d9c643028259c0f7a2b411cd96607 [ Upstream commit b7fb7729c94fb2d23c79ff44f7a2da089c92d81c ] This bug was noticed while re-implementing parts of the kernel driver in userspace using spidev. The goal was to enable some of the errata workarounds that Microchip describes in their errata sheet [1]. Both the errata sheet and the regular datasheet of e.g. the KSZ8795 imply that you need to do this for indirect register accesses: - write a 16-bit value to a control register pair (this value consists of the indirect register table, and the offset inside the table) - either read or write an 8-bit value from the data storage register (indicated by REG_IND_BYTE in the kernel) The current implementation has the order swapped. It can be proven, by reading back some indirect register with known content (the EEE register modified in ksz8_handle_global_errata() is one of these), that this implementation does not work. Private discussion with Oleksij Rempel of Pengutronix has revealed that the workaround was apparantly never tested on actual hardware. [1] https://ww1.microchip.com/downloads/aemDocuments/documents/OTH/ProductDocuments/Errata/KSZ87xx-Errata-DS80000687C.pdf Signed-off-by: Tobias Jakobi (Compleo) <tobias.jakobi.compleo@gmail.com> Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Fixes: 7b6e6235b664 ("net: dsa: microchip: ksz8795: handle eee specif erratum") Link: https://lore.kernel.org/r/20240304154135.161332-1-tobias.jakobi.compleo@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit b7fb7729c94fb2d23c79ff44f7a2da089c92d81c ]

This bug was noticed while re-implementing parts of the kernel
driver in userspace using spidev. The goal was to enable some
of the errata workarounds that Microchip describes in their
errata sheet [1].

Both the errata sheet and the regular datasheet of e.g. the KSZ8795
imply that you need to do this for indirect register accesses:
- write a 16-bit value to a control register pair (this value
  consists of the indirect register table, and the offset inside
  the table)
- either read or write an 8-bit value from the data storage
  register (indicated by REG_IND_BYTE in the kernel)

The current implementation has the order swapped. It can be
proven, by reading back some indirect register with known content
(the EEE register modified in ksz8_handle_global_errata() is one of
these), that this implementation does not work.

Private discussion with Oleksij Rempel of Pengutronix has revealed
that the workaround was apparantly never tested on actual hardware.

[1] https://ww1.microchip.com/downloads/aemDocuments/documents/OTH/ProductDocuments/Errata/KSZ87xx-Errata-DS80000687C.pdf

Signed-off-by: Tobias Jakobi (Compleo) <tobias.jakobi.compleo@gmail.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Fixes: 7b6e6235b664 ("net: dsa: microchip: ksz8795: handle eee specif erratum")
Link: https://lore.kernel.org/r/20240304154135.161332-1-tobias.jakobi.compleo@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
igc: avoid returning frame twice in XDP_REDIRECT 2024-03-15T14:48:15+00:00 Florian Kauer florian.kauer@linutronix.de 2024-02-19T09:08:43+00:00 63a3c1f3c9ecc654d851e7906d05334cd0c236e2 [ Upstream commit ef27f655b438bed4c83680e4f01e1cde2739854b ] When a frame can not be transmitted in XDP_REDIRECT (e.g. due to a full queue), it is necessary to free it by calling xdp_return_frame_rx_napi. However, this is the responsibility of the caller of the ndo_xdp_xmit (see for example bq_xmit_all in kernel/bpf/devmap.c) and thus calling it inside igc_xdp_xmit (which is the ndo_xdp_xmit of the igc driver) as well will lead to memory corruption. In fact, bq_xmit_all expects that it can return all frames after the last successfully transmitted one. Therefore, break for the first not transmitted frame, but do not call xdp_return_frame_rx_napi in igc_xdp_xmit. This is equally implemented in other Intel drivers such as the igb. There are two alternatives to this that were rejected: 1. Return num_frames as all the frames would have been transmitted and release them inside igc_xdp_xmit. While it might work technically, it is not what the return value is meant to represent (i.e. the number of SUCCESSFULLY transmitted packets). 2. Rework kernel/bpf/devmap.c and all drivers to support non-consecutively dropped packets. Besides being complex, it likely has a negative performance impact without a significant gain since it is anyway unlikely that the next frame can be transmitted if the previous one was dropped. The memory corruption can be reproduced with the following script which leads to a kernel panic after a few seconds. It basically generates more traffic than a i225 NIC can transmit and pushes it via XDP_REDIRECT from a virtual interface to the physical interface where frames get dropped. #!/bin/bash INTERFACE=enp4s0 INTERFACE_IDX=`cat /sys/class/net/$INTERFACE/ifindex` sudo ip link add dev veth1 type veth peer name veth2 sudo ip link set up $INTERFACE sudo ip link set up veth1 sudo ip link set up veth2 cat << EOF > redirect.bpf.c SEC("prog") int redirect(struct xdp_md *ctx) { return bpf_redirect($INTERFACE_IDX, 0); } char _license[] SEC("license") = "GPL"; EOF clang -O2 -g -Wall -target bpf -c redirect.bpf.c -o redirect.bpf.o sudo ip link set veth2 xdp obj redirect.bpf.o cat << EOF > pass.bpf.c SEC("prog") int pass(struct xdp_md *ctx) { return XDP_PASS; } char _license[] SEC("license") = "GPL"; EOF clang -O2 -g -Wall -target bpf -c pass.bpf.c -o pass.bpf.o sudo ip link set $INTERFACE xdp obj pass.bpf.o cat << EOF > trafgen.cfg { /* Ethernet Header */ 0xe8, 0x6a, 0x64, 0x41, 0xbf, 0x46, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, const16(ETH_P_IP), /* IPv4 Header */ 0b01000101, 0, # IPv4 version, IHL, TOS const16(1028), # IPv4 total length (UDP length + 20 bytes (IP header)) const16(2), # IPv4 ident 0b01000000, 0, # IPv4 flags, fragmentation off 64, # IPv4 TTL 17, # Protocol UDP csumip(14, 33), # IPv4 checksum /* UDP Header */ 10, 0, 1, 1, # IP Src - adapt as needed 10, 0, 1, 2, # IP Dest - adapt as needed const16(6666), # UDP Src Port const16(6666), # UDP Dest Port const16(1008), # UDP length (UDP header 8 bytes + payload length) csumudp(14, 34), # UDP checksum /* Payload */ fill('W', 1000), } EOF sudo trafgen -i trafgen.cfg -b3000MB -o veth1 --cpp Fixes: 4ff320361092 ("igc: Add support for XDP_REDIRECT action") Signed-off-by: Florian Kauer <florian.kauer@linutronix.de> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit ef27f655b438bed4c83680e4f01e1cde2739854b ]

When a frame can not be transmitted in XDP_REDIRECT
(e.g. due to a full queue), it is necessary to free
it by calling xdp_return_frame_rx_napi.

However, this is the responsibility of the caller of
the ndo_xdp_xmit (see for example bq_xmit_all in
kernel/bpf/devmap.c) and thus calling it inside
igc_xdp_xmit (which is the ndo_xdp_xmit of the igc
driver) as well will lead to memory corruption.

In fact, bq_xmit_all expects that it can return all
frames after the last successfully transmitted one.
Therefore, break for the first not transmitted frame,
but do not call xdp_return_frame_rx_napi in igc_xdp_xmit.
This is equally implemented in other Intel drivers
such as the igb.

There are two alternatives to this that were rejected:
1. Return num_frames as all the frames would have been
   transmitted and release them inside igc_xdp_xmit.
   While it might work technically, it is not what
   the return value is meant to represent (i.e. the
   number of SUCCESSFULLY transmitted packets).
2. Rework kernel/bpf/devmap.c and all drivers to
   support non-consecutively dropped packets.
   Besides being complex, it likely has a negative
   performance impact without a significant gain
   since it is anyway unlikely that the next frame
   can be transmitted if the previous one was dropped.

The memory corruption can be reproduced with
the following script which leads to a kernel panic
after a few seconds.  It basically generates more
traffic than a i225 NIC can transmit and pushes it
via XDP_REDIRECT from a virtual interface to the
physical interface where frames get dropped.

   #!/bin/bash
   INTERFACE=enp4s0
   INTERFACE_IDX=`cat /sys/class/net/$INTERFACE/ifindex`

   sudo ip link add dev veth1 type veth peer name veth2
   sudo ip link set up $INTERFACE
   sudo ip link set up veth1
   sudo ip link set up veth2

   cat << EOF > redirect.bpf.c

   SEC("prog")
   int redirect(struct xdp_md *ctx)
   {
       return bpf_redirect($INTERFACE_IDX, 0);
   }

   char _license[] SEC("license") = "GPL";
   EOF
   clang -O2 -g -Wall -target bpf -c redirect.bpf.c -o redirect.bpf.o
   sudo ip link set veth2 xdp obj redirect.bpf.o

   cat << EOF > pass.bpf.c

   SEC("prog")
   int pass(struct xdp_md *ctx)
   {
       return XDP_PASS;
   }

   char _license[] SEC("license") = "GPL";
   EOF
   clang -O2 -g -Wall -target bpf -c pass.bpf.c -o pass.bpf.o
   sudo ip link set $INTERFACE xdp obj pass.bpf.o

   cat << EOF > trafgen.cfg

   {
     /* Ethernet Header */
     0xe8, 0x6a, 0x64, 0x41, 0xbf, 0x46,
     0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
     const16(ETH_P_IP),

     /* IPv4 Header */
     0b01000101, 0,   # IPv4 version, IHL, TOS
     const16(1028),   # IPv4 total length (UDP length + 20 bytes (IP header))
     const16(2),      # IPv4 ident
     0b01000000, 0,   # IPv4 flags, fragmentation off
     64,              # IPv4 TTL
     17,              # Protocol UDP
     csumip(14, 33),  # IPv4 checksum

     /* UDP Header */
     10,  0, 1, 1,    # IP Src - adapt as needed
     10,  0, 1, 2,    # IP Dest - adapt as needed
     const16(6666),   # UDP Src Port
     const16(6666),   # UDP Dest Port
     const16(1008),   # UDP length (UDP header 8 bytes + payload length)
     csumudp(14, 34), # UDP checksum

     /* Payload */
     fill('W', 1000),
   }
   EOF

   sudo trafgen -i trafgen.cfg -b3000MB -o veth1 --cpp

Fixes: 4ff320361092 ("igc: Add support for XDP_REDIRECT action")
Signed-off-by: Florian Kauer <florian.kauer@linutronix.de>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
net: ice: Fix potential NULL pointer dereference in ice_bridge_setlink() 2024-03-15T14:48:15+00:00 Rand Deeb rand.sec96@gmail.com 2024-02-28T15:54:48+00:00 afdd29726a6de4ba27cd15590661424c888dc596 [ Upstream commit 06e456a05d669ca30b224b8ed962421770c1496c ] The function ice_bridge_setlink() may encounter a NULL pointer dereference if nlmsg_find_attr() returns NULL and br_spec is dereferenced subsequently in nla_for_each_nested(). To address this issue, add a check to ensure that br_spec is not NULL before proceeding with the nested attribute iteration. Fixes: b1edc14a3fbf ("ice: Implement ice_bridge_getlink and ice_bridge_setlink") Signed-off-by: Rand Deeb <rand.sec96@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 06e456a05d669ca30b224b8ed962421770c1496c ]

The function ice_bridge_setlink() may encounter a NULL pointer dereference
if nlmsg_find_attr() returns NULL and br_spec is dereferenced subsequently
in nla_for_each_nested(). To address this issue, add a check to ensure that
br_spec is not NULL before proceeding with the nested attribute iteration.

Fixes: b1edc14a3fbf ("ice: Implement ice_bridge_getlink and ice_bridge_setlink")
Signed-off-by: Rand Deeb <rand.sec96@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ice: virtchnl: stop pretending to support RSS over AQ or registers 2024-03-15T14:48:14+00:00 Jacob Keller jacob.e.keller@intel.com 2024-01-31T21:51:58+00:00 6293ff942e9ce72ae9fced8c277f078e97843dd4 [ Upstream commit 2652b99e43403dc464f3648483ffb38e48872fe4 ] The E800 series hardware uses the same iAVF driver as older devices, including the virtchnl negotiation scheme. This negotiation scheme includes a mechanism to determine what type of RSS should be supported, including RSS over PF virtchnl messages, RSS over firmware AdminQ messages, and RSS via direct register access. The PF driver will always prefer VIRTCHNL_VF_OFFLOAD_RSS_PF if its supported by the VF driver. However, if an older VF driver is loaded, it may request only VIRTCHNL_VF_OFFLOAD_RSS_REG or VIRTCHNL_VF_OFFLOAD_RSS_AQ. The ice driver happily agrees to support these methods. Unfortunately, the underlying hardware does not support these mechanisms. The E800 series VFs don't have the appropriate registers for RSS_REG. The mailbox queue used by VFs for VF to PF communication blocks messages which do not have the VF-to-PF opcode. Stop lying to the VF that it could support RSS over AdminQ or registers, as these interfaces do not work when the hardware is operating on an E800 series device. In practice this is unlikely to be hit by any normal user. The iAVF driver has supported RSS over PF virtchnl commands since 2016, and always defaults to using RSS_PF if possible. In principle, nothing actually stops the existing VF from attempting to access the registers or send an AQ command. However a properly coded VF will check the capability flags and will report a more useful error if it detects a case where the driver does not support the RSS offloads that it does. Fixes: 1071a8358a28 ("ice: Implement virtchnl commands for AVF support") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Alan Brady <alan.brady@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 2652b99e43403dc464f3648483ffb38e48872fe4 ]

The E800 series hardware uses the same iAVF driver as older devices,
including the virtchnl negotiation scheme.

This negotiation scheme includes a mechanism to determine what type of RSS
should be supported, including RSS over PF virtchnl messages, RSS over
firmware AdminQ messages, and RSS via direct register access.

The PF driver will always prefer VIRTCHNL_VF_OFFLOAD_RSS_PF if its
supported by the VF driver. However, if an older VF driver is loaded, it
may request only VIRTCHNL_VF_OFFLOAD_RSS_REG or VIRTCHNL_VF_OFFLOAD_RSS_AQ.

The ice driver happily agrees to support these methods. Unfortunately, the
underlying hardware does not support these mechanisms. The E800 series VFs
don't have the appropriate registers for RSS_REG. The mailbox queue used by
VFs for VF to PF communication blocks messages which do not have the
VF-to-PF opcode.

Stop lying to the VF that it could support RSS over AdminQ or registers, as
these interfaces do not work when the hardware is operating on an E800
series device.

In practice this is unlikely to be hit by any normal user. The iAVF driver
has supported RSS over PF virtchnl commands since 2016, and always defaults
to using RSS_PF if possible.

In principle, nothing actually stops the existing VF from attempting to
access the registers or send an AQ command. However a properly coded VF
will check the capability flags and will report a more useful error if it
detects a case where the driver does not support the RSS offloads that it
does.

Fixes: 1071a8358a28 ("ice: Implement virtchnl commands for AVF support")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Alan Brady <alan.brady@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
net: sparx5: Fix use after free inside sparx5_del_mact_entry 2024-03-15T14:48:14+00:00 Horatiu Vultur horatiu.vultur@microchip.com 2024-03-01T08:06:08+00:00 0de693d68b0a18d5e256556c7c62d92cca35ad52 [ Upstream commit 89d72d4125e94aa3c2140fedd97ce07ba9e37674 ] Based on the static analyzis of the code it looks like when an entry from the MAC table was removed, the entry was still used after being freed. More precise the vid of the mac_entry was used after calling devm_kfree on the mac_entry. The fix consists in first using the vid of the mac_entry to delete the entry from the HW and after that to free it. Fixes: b37a1bae742f ("net: sparx5: add mactable support") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240301080608.3053468-1-horatiu.vultur@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 89d72d4125e94aa3c2140fedd97ce07ba9e37674 ]

Based on the static analyzis of the code it looks like when an entry
from the MAC table was removed, the entry was still used after being
freed. More precise the vid of the mac_entry was used after calling
devm_kfree on the mac_entry.
The fix consists in first using the vid of the mac_entry to delete the
entry from the HW and after that to free it.

Fixes: b37a1bae742f ("net: sparx5: add mactable support")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240301080608.3053468-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
geneve: make sure to pull inner header in geneve_rx() 2024-03-15T14:48:14+00:00 Eric Dumazet edumazet@google.com 2024-02-29T13:11:52+00:00 c0b22568a9d8384fd000cc49acb8f74bde40d1b5 [ Upstream commit 1ca1ba465e55b9460e4e75dec9fff31e708fec74 ] syzbot triggered a bug in geneve_rx() [1] Issue is similar to the one I fixed in commit 8d975c15c0cd ("ip6_tunnel: make sure to pull inner header in __ip6_tnl_rcv()") We have to save skb->network_header in a temporary variable in order to be able to recompute the network_header pointer after a pskb_inet_may_pull() call. pskb_inet_may_pull() makes sure the needed headers are in skb->head. [1] BUG: KMSAN: uninit-value in IP_ECN_decapsulate include/net/inet_ecn.h:302 [inline] BUG: KMSAN: uninit-value in geneve_rx drivers/net/geneve.c:279 [inline] BUG: KMSAN: uninit-value in geneve_udp_encap_recv+0x36f9/0x3c10 drivers/net/geneve.c:391 IP_ECN_decapsulate include/net/inet_ecn.h:302 [inline] geneve_rx drivers/net/geneve.c:279 [inline] geneve_udp_encap_recv+0x36f9/0x3c10 drivers/net/geneve.c:391 udp_queue_rcv_one_skb+0x1d39/0x1f20 net/ipv4/udp.c:2108 udp_queue_rcv_skb+0x6ae/0x6e0 net/ipv4/udp.c:2186 udp_unicast_rcv_skb+0x184/0x4b0 net/ipv4/udp.c:2346 __udp4_lib_rcv+0x1c6b/0x3010 net/ipv4/udp.c:2422 udp_rcv+0x7d/0xa0 net/ipv4/udp.c:2604 ip_protocol_deliver_rcu+0x264/0x1300 net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x2b8/0x440 net/ipv4/ip_input.c:233 NF_HOOK include/linux/netfilter.h:314 [inline] ip_local_deliver+0x21f/0x490 net/ipv4/ip_input.c:254 dst_input include/net/dst.h:461 [inline] ip_rcv_finish net/ipv4/ip_input.c:449 [inline] NF_HOOK include/linux/netfilter.h:314 [inline] ip_rcv+0x46f/0x760 net/ipv4/ip_input.c:569 __netif_receive_skb_one_core net/core/dev.c:5534 [inline] __netif_receive_skb+0x1a6/0x5a0 net/core/dev.c:5648 process_backlog+0x480/0x8b0 net/core/dev.c:5976 __napi_poll+0xe3/0x980 net/core/dev.c:6576 napi_poll net/core/dev.c:6645 [inline] net_rx_action+0x8b8/0x1870 net/core/dev.c:6778 __do_softirq+0x1b7/0x7c5 kernel/softirq.c:553 do_softirq+0x9a/0xf0 kernel/softirq.c:454 __local_bh_enable_ip+0x9b/0xa0 kernel/softirq.c:381 local_bh_enable include/linux/bottom_half.h:33 [inline] rcu_read_unlock_bh include/linux/rcupdate.h:820 [inline] __dev_queue_xmit+0x2768/0x51c0 net/core/dev.c:4378 dev_queue_xmit include/linux/netdevice.h:3171 [inline] packet_xmit+0x9c/0x6b0 net/packet/af_packet.c:276 packet_snd net/packet/af_packet.c:3081 [inline] packet_sendmsg+0x8aef/0x9f10 net/packet/af_packet.c:3113 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] __sys_sendto+0x735/0xa10 net/socket.c:2191 __do_sys_sendto net/socket.c:2203 [inline] __se_sys_sendto net/socket.c:2199 [inline] __x64_sys_sendto+0x125/0x1c0 net/socket.c:2199 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b Uninit was created at: slab_post_alloc_hook mm/slub.c:3819 [inline] slab_alloc_node mm/slub.c:3860 [inline] kmem_cache_alloc_node+0x5cb/0xbc0 mm/slub.c:3903 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:560 __alloc_skb+0x352/0x790 net/core/skbuff.c:651 alloc_skb include/linux/skbuff.h:1296 [inline] alloc_skb_with_frags+0xc8/0xbd0 net/core/skbuff.c:6394 sock_alloc_send_pskb+0xa80/0xbf0 net/core/sock.c:2783 packet_alloc_skb net/packet/af_packet.c:2930 [inline] packet_snd net/packet/af_packet.c:3024 [inline] packet_sendmsg+0x70c2/0x9f10 net/packet/af_packet.c:3113 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] __sys_sendto+0x735/0xa10 net/socket.c:2191 __do_sys_sendto net/socket.c:2203 [inline] __se_sys_sendto net/socket.c:2199 [inline] __x64_sys_sendto+0x125/0x1c0 net/socket.c:2199 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b Fixes: 2d07dc79fe04 ("geneve: add initial netdev driver for GENEVE tunnels") Reported-and-tested-by: syzbot+6a1423ff3f97159aae64@syzkaller.appspotmail.com Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 1ca1ba465e55b9460e4e75dec9fff31e708fec74 ]

syzbot triggered a bug in geneve_rx() [1]

Issue is similar to the one I fixed in commit 8d975c15c0cd
("ip6_tunnel: make sure to pull inner header in __ip6_tnl_rcv()")

We have to save skb->network_header in a temporary variable
in order to be able to recompute the network_header pointer
after a pskb_inet_may_pull() call.

pskb_inet_may_pull() makes sure the needed headers are in skb->head.

[1]
BUG: KMSAN: uninit-value in IP_ECN_decapsulate include/net/inet_ecn.h:302 [inline]
 BUG: KMSAN: uninit-value in geneve_rx drivers/net/geneve.c:279 [inline]
 BUG: KMSAN: uninit-value in geneve_udp_encap_recv+0x36f9/0x3c10 drivers/net/geneve.c:391
  IP_ECN_decapsulate include/net/inet_ecn.h:302 [inline]
  geneve_rx drivers/net/geneve.c:279 [inline]
  geneve_udp_encap_recv+0x36f9/0x3c10 drivers/net/geneve.c:391
  udp_queue_rcv_one_skb+0x1d39/0x1f20 net/ipv4/udp.c:2108
  udp_queue_rcv_skb+0x6ae/0x6e0 net/ipv4/udp.c:2186
  udp_unicast_rcv_skb+0x184/0x4b0 net/ipv4/udp.c:2346
  __udp4_lib_rcv+0x1c6b/0x3010 net/ipv4/udp.c:2422
  udp_rcv+0x7d/0xa0 net/ipv4/udp.c:2604
  ip_protocol_deliver_rcu+0x264/0x1300 net/ipv4/ip_input.c:205
  ip_local_deliver_finish+0x2b8/0x440 net/ipv4/ip_input.c:233
  NF_HOOK include/linux/netfilter.h:314 [inline]
  ip_local_deliver+0x21f/0x490 net/ipv4/ip_input.c:254
  dst_input include/net/dst.h:461 [inline]
  ip_rcv_finish net/ipv4/ip_input.c:449 [inline]
  NF_HOOK include/linux/netfilter.h:314 [inline]
  ip_rcv+0x46f/0x760 net/ipv4/ip_input.c:569
  __netif_receive_skb_one_core net/core/dev.c:5534 [inline]
  __netif_receive_skb+0x1a6/0x5a0 net/core/dev.c:5648
  process_backlog+0x480/0x8b0 net/core/dev.c:5976
  __napi_poll+0xe3/0x980 net/core/dev.c:6576
  napi_poll net/core/dev.c:6645 [inline]
  net_rx_action+0x8b8/0x1870 net/core/dev.c:6778
  __do_softirq+0x1b7/0x7c5 kernel/softirq.c:553
  do_softirq+0x9a/0xf0 kernel/softirq.c:454
  __local_bh_enable_ip+0x9b/0xa0 kernel/softirq.c:381
  local_bh_enable include/linux/bottom_half.h:33 [inline]
  rcu_read_unlock_bh include/linux/rcupdate.h:820 [inline]
  __dev_queue_xmit+0x2768/0x51c0 net/core/dev.c:4378
  dev_queue_xmit include/linux/netdevice.h:3171 [inline]
  packet_xmit+0x9c/0x6b0 net/packet/af_packet.c:276
  packet_snd net/packet/af_packet.c:3081 [inline]
  packet_sendmsg+0x8aef/0x9f10 net/packet/af_packet.c:3113
  sock_sendmsg_nosec net/socket.c:730 [inline]
  __sock_sendmsg net/socket.c:745 [inline]
  __sys_sendto+0x735/0xa10 net/socket.c:2191
  __do_sys_sendto net/socket.c:2203 [inline]
  __se_sys_sendto net/socket.c:2199 [inline]
  __x64_sys_sendto+0x125/0x1c0 net/socket.c:2199
  do_syscall_x64 arch/x86/entry/common.c:52 [inline]
  do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x63/0x6b

Uninit was created at:
  slab_post_alloc_hook mm/slub.c:3819 [inline]
  slab_alloc_node mm/slub.c:3860 [inline]
  kmem_cache_alloc_node+0x5cb/0xbc0 mm/slub.c:3903
  kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:560
  __alloc_skb+0x352/0x790 net/core/skbuff.c:651
  alloc_skb include/linux/skbuff.h:1296 [inline]
  alloc_skb_with_frags+0xc8/0xbd0 net/core/skbuff.c:6394
  sock_alloc_send_pskb+0xa80/0xbf0 net/core/sock.c:2783
  packet_alloc_skb net/packet/af_packet.c:2930 [inline]
  packet_snd net/packet/af_packet.c:3024 [inline]
  packet_sendmsg+0x70c2/0x9f10 net/packet/af_packet.c:3113
  sock_sendmsg_nosec net/socket.c:730 [inline]
  __sock_sendmsg net/socket.c:745 [inline]
  __sys_sendto+0x735/0xa10 net/socket.c:2191
  __do_sys_sendto net/socket.c:2203 [inline]
  __se_sys_sendto net/socket.c:2199 [inline]
  __x64_sys_sendto+0x125/0x1c0 net/socket.c:2199
  do_syscall_x64 arch/x86/entry/common.c:52 [inline]
  do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x63/0x6b

Fixes: 2d07dc79fe04 ("geneve: add initial netdev driver for GENEVE tunnels")
Reported-and-tested-by: syzbot+6a1423ff3f97159aae64@syzkaller.appspotmail.com
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ice: reorder disabling IRQ and NAPI in ice_qp_dis 2024-03-15T14:48:14+00:00 Maciej Fijalkowski maciej.fijalkowski@intel.com 2024-02-20T21:45:53+00:00 5822c02707dac0a995437ef27ba1c441aaca0e1f [ Upstream commit 99099c6bc75a30b76bb5d6774a0509ab6f06af05 ] ice_qp_dis() currently does things in very mixed way. Tx is stopped before disabling IRQ on related queue vector, then it takes care of disabling Rx and finally NAPI is disabled. Let us start with disabling IRQs in the first place followed by turning off NAPI. Then it is safe to handle queues. One subtle change on top of that is that even though ice_qp_ena() looks more sane, clear ICE_CFG_BUSY as the last thing there. Fixes: 2d4238f55697 ("ice: Add support for AF_XDP") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 99099c6bc75a30b76bb5d6774a0509ab6f06af05 ]

ice_qp_dis() currently does things in very mixed way. Tx is stopped
before disabling IRQ on related queue vector, then it takes care of
disabling Rx and finally NAPI is disabled.

Let us start with disabling IRQs in the first place followed by turning
off NAPI. Then it is safe to handle queues.

One subtle change on top of that is that even though ice_qp_ena() looks
more sane, clear ICE_CFG_BUSY as the last thing there.

Fixes: 2d4238f55697 ("ice: Add support for AF_XDP")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
i40e: disable NAPI right after disabling irqs when handling xsk_pool 2024-03-15T14:48:14+00:00 Maciej Fijalkowski maciej.fijalkowski@intel.com 2024-02-20T21:45:52+00:00 8e23edc54a5cb3d4ea881e424673c824255a3422 [ Upstream commit d562b11c1eac7d73f4c778b4cbe5468f86b1f20d ] Disable NAPI before shutting down queues that this particular NAPI contains so that the order of actions in i40e_queue_pair_disable() mirrors what we do in i40e_queue_pair_enable(). Fixes: 123cecd427b6 ("i40e: added queue pair disable/enable functions") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit d562b11c1eac7d73f4c778b4cbe5468f86b1f20d ]

Disable NAPI before shutting down queues that this particular NAPI
contains so that the order of actions in i40e_queue_pair_disable()
mirrors what we do in i40e_queue_pair_enable().

Fixes: 123cecd427b6 ("i40e: added queue pair disable/enable functions")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>