linux-stable.git/drivers/net, branch v5.4.84

can: m_can: m_can_dev_setup(): add support for bosch mcan version 3.3.0

2020-12-16T09:56:57+00:00

[ Upstream commit 5c7d55bded77da6db7c5d249610e3a2eed730b3c ]

Add support for mcan bit timing and control mode according to bosch mcan IP
version 3.3.0. The mcan version read from the Core Release field of CREL
register would be 33. Accordingly the properties are to be set for mcan v3.3.0

Signed-off-by: Pankaj Sharma 
Link: https://lore.kernel.org/r/1606366302-5520-1-git-send-email-pankj.sharma@samsung.com
Signed-off-by: Marc Kleine-Budde 
Signed-off-by: Sasha Levin

ibmvnic: skip tx timeout reset while in resetting

2020-12-16T09:56:56+00:00

[ Upstream commit 855a631a4c11458a9cef1ab79c1530436aa95fae ]

Sometimes it takes longer than 5 seconds (watchdog timeout) to complete
failover, migration, and other resets. In stead of scheduling another
timeout reset, we wait for the current one to complete.

Suggested-by: Brian King 
Signed-off-by: Lijun Pan 
Reviewed-by: Dany Madden 
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

iwlwifi: mvm: fix kernel panic in case of assert during CSA

2020-12-16T09:56:55+00:00

[ Upstream commit fe56d05ee6c87f6a1a8c7267affd92c9438249cc ]

During CSA, we briefly nullify the phy context, in __iwl_mvm_unassign_vif_chanctx.
In case we have a FW assert right after it, it remains NULL though.
We end up running into endless loop due to mac80211 trying repeatedly to
move us to ASSOC state, and we keep returning -EINVAL. Later down the road
we hit a kernel panic.

Detect and avoid this endless loop.

Signed-off-by: Sara Sharon 
Signed-off-by: Luca Coelho 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/iwlwifi.20201107104557.d64de2c17bff.Iedd0d2afa20a2aacba5259a5cae31cb3a119a4eb@changeid
Signed-off-by: Sasha Levin

iwlwifi: pcie: set LTR to avoid completion timeout

2020-12-16T09:56:55+00:00

[ Upstream commit edb625208d84aef179e3f16590c1c582fc5fdae6 ]

On some platforms, the preset values aren't correct and then we may
get a completion timeout in the firmware. Change the LTR configuration
to avoid that. The firmware will do some more complex reinit of this
later, but for the boot process we use ~250usec.

Signed-off-by: Johannes Berg 
Signed-off-by: Luca Coelho 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/iwlwifi.20201107104557.d83d591c05ba.I42885c9fb500bc08b9a4c07c4ff3d436cc7a3c84@changeid
Signed-off-by: Sasha Levin

iwlwifi: pcie: limit memory read spin time

2020-12-16T09:56:55+00:00

[ Upstream commit 04516706bb99889986ddfa3a769ed50d2dc7ac13 ]

When we read device memory, we lock a spinlock, write the address we
want to read from the device and then spin in a loop reading the data
in 32-bit quantities from another register.

As the description makes clear, this is rather inefficient, incurring
a PCIe bus transaction for every read. In a typical device today, we
want to read 786k SMEM if it crashes, leading to 192k register reads.
Occasionally, we've seen the whole loop take over 20 seconds and then
triggering the soft lockup detector.

Clearly, it is unreasonable to spin here for such extended periods of
time.

To fix this, break the loop down into an outer and an inner loop, and
break out of the inner loop if more than half a second elapsed. To
avoid too much overhead, check for that only every 128 reads, though
there's no particular reason for that number. Then, unlock and relock
to obtain NIC access again, reprogram the start address and continue.

This will keep (interrupt) latencies on the CPU down to a reasonable
time.

Signed-off-by: Johannes Berg 
Signed-off-by: Mordechay Goodstein 
Signed-off-by: Luca Coelho 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/iwlwifi.20201022165103.45878a7e49aa.I3b9b9c5a10002915072312ce75b68ed5b3dc6e14@changeid
Signed-off-by: Sasha Levin

Revert "geneve: pull IP header before ECN decapsulation"

2020-12-11T12:23:33+00:00

commit c02bd115b1d25931159f89c7d9bf47a30f5d4b41 upstream.

This reverts commit 4179b00c04d1 ("geneve: pull IP header before ECN decapsulation").

Eric says: "network header should have been pulled already before
hitting geneve_rx()". Let's revert the syzbot fix since it's causing
more harm than good, and revisit.

Suggested-by: Eric Dumazet 
Reported-by: Jianlin Shi 
Fixes: 4179b00c04d1 ("geneve: pull IP header before ECN decapsulation")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=210569
Link: https://lore.kernel.org/netdev/CANn89iJVWfb=2i7oU1=D55rOyQnBbbikf+Mc6XHMkY7YX-yGEw@mail.gmail.com/
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

rtw88: debug: Fix uninitialized memory in debugfs code

2020-12-11T12:23:32+00:00

commit 74a8c816fa8fa7862df870660e9821abb56649fe upstream.

This code does not ensure that the whole buffer is initialized and none
of the callers check for errors so potentially none of the buffer is
initialized.  Add a memset to eliminate this bug.

Fixes: e3037485c68e ("rtw88: new Realtek 802.11ac driver")
Signed-off-by: Dan Carpenter 
Signed-off-by: Kalle Valo 
Link: https://lore.kernel.org/r/X8ilOfVz3pf0T5ec@mwanda
Signed-off-by: Greg Kroah-Hartman

net/mlx5: Fix wrong address reclaim when command interface is down

2020-12-08T09:40:27+00:00

[ Upstream commit 1d2bb5ad89f47d8ce8aedc70ef85059ab3870292 ]

When command interface is down, driver to reclaim all 4K page chucks that
were hold by the Firmeware. Fix a bug for 64K page size systems, where
driver repeatedly released only the first chunk of the page.

Define helper function to fill 4K chunks for a given Firmware pages.
Iterate over all unreleased Firmware pages and call the hepler per each.

Fixes: 5adff6a08862 ("net/mlx5: Fix incorrect page count when in internal error")
Signed-off-by: Eran Ben Elisha 
Signed-off-by: Saeed Mahameed 
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

net/mlx5: DR, Proper handling of unsupported Connect-X6DX SW steering

2020-12-08T09:40:27+00:00

[ Upstream commit d421e466c2373095f165ddd25cbabd6c5b077928 ]

STEs format for Connect-X5 and Connect-X6DX different. Currently, on
Connext-X6DX the SW steering would break at some point when building STEs
w/o giving a proper error message. Fix this by checking the STE format of
the current device when initializing domain: add mlx5_ifc definitions for
Connect-X6DX SW steering, read FW capability to get the current format
version, and check this version when domain is being created.

Fixes: 26d688e33f88 ("net/mlx5: DR, Add Steering entry (STE) utilities")
Signed-off-by: Yevgeny Kliteynik 
Signed-off-by: Saeed Mahameed 
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

net: mvpp2: Fix error return code in mvpp2_open()

2020-12-08T09:40:26+00:00

[ Upstream commit 82a10dc7f0960735f40e8d7d3bee56934291600f ]

Fix to return negative error code -ENOENT from invalid configuration
error handling case instead of 0, as done elsewhere in this function.

Fixes: 4bb043262878 ("net: mvpp2: phylink support")
Reported-by: Hulk Robot 
Signed-off-by: Wang Hai 
Reviewed-by: Andrew Lunn 
Link: https://lore.kernel.org/r/20201203141806.37966-1-wanghai38@huawei.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman