linux-stable.git/drivers/net, branch v5.4.70 Linux kernel stable tree drivers/net/wan/hdlc: Set skb->protocol before transmitting 2020-10-07T06:01:26+00:00 Xie He xie.he.0141@gmail.com 2020-09-16T21:25:07+00:00 126e6099b8c11e160a8a38943e68aaa3782dfab4 [ Upstream commit 9fb030a70431a2a2a1b292dbf0b2f399cc072c16 ] This patch sets skb->protocol before transmitting frames on the HDLC device, so that a user listening on the HDLC device with an AF_PACKET socket will see outgoing frames' sll_protocol field correctly set and consistent with that of incoming frames. 1. Control frames in hdlc_cisco and hdlc_ppp When these drivers send control frames, skb->protocol is not set. This value should be set to htons(ETH_P_HDLC), because when receiving control frames, their skb->protocol is set to htons(ETH_P_HDLC). When receiving, hdlc_type_trans in hdlc.h is called, which then calls cisco_type_trans or ppp_type_trans. The skb->protocol of control frames is set to htons(ETH_P_HDLC) so that the control frames can be received by hdlc_rcv in hdlc.c, which calls cisco_rx or ppp_rx to process the control frames. 2. hdlc_fr When this driver sends control frames, skb->protocol is set to internal values used in this driver. When this driver sends data frames (from upper stacked PVC devices), skb->protocol is the same as that of the user data packet being sent on the upper PVC device (for normal PVC devices), or is htons(ETH_P_802_3) (for Ethernet-emulating PVC devices). However, skb->protocol for both control frames and data frames should be set to htons(ETH_P_HDLC), because when receiving, all frames received on the HDLC device will have their skb->protocol set to htons(ETH_P_HDLC). When receiving, hdlc_type_trans in hdlc.h is called, and because this driver doesn't provide a type_trans function in struct hdlc_proto, all frames will have their skb->protocol set to htons(ETH_P_HDLC). The frames are then received by hdlc_rcv in hdlc.c, which calls fr_rx to process the frames (control frames are consumed and data frames are re-received on upper PVC devices). Cc: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Xie He <xie.he.0141@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 9fb030a70431a2a2a1b292dbf0b2f399cc072c16 ]

This patch sets skb->protocol before transmitting frames on the HDLC
device, so that a user listening on the HDLC device with an AF_PACKET
socket will see outgoing frames' sll_protocol field correctly set and
consistent with that of incoming frames.

1. Control frames in hdlc_cisco and hdlc_ppp

When these drivers send control frames, skb->protocol is not set.

This value should be set to htons(ETH_P_HDLC), because when receiving
control frames, their skb->protocol is set to htons(ETH_P_HDLC).

When receiving, hdlc_type_trans in hdlc.h is called, which then calls
cisco_type_trans or ppp_type_trans. The skb->protocol of control frames
is set to htons(ETH_P_HDLC) so that the control frames can be received
by hdlc_rcv in hdlc.c, which calls cisco_rx or ppp_rx to process the
control frames.

2. hdlc_fr

When this driver sends control frames, skb->protocol is set to internal
values used in this driver.

When this driver sends data frames (from upper stacked PVC devices),
skb->protocol is the same as that of the user data packet being sent on
the upper PVC device (for normal PVC devices), or is htons(ETH_P_802_3)
(for Ethernet-emulating PVC devices).

However, skb->protocol for both control frames and data frames should be
set to htons(ETH_P_HDLC), because when receiving, all frames received on
the HDLC device will have their skb->protocol set to htons(ETH_P_HDLC).

When receiving, hdlc_type_trans in hdlc.h is called, and because this
driver doesn't provide a type_trans function in struct hdlc_proto,
all frames will have their skb->protocol set to htons(ETH_P_HDLC).
The frames are then received by hdlc_rcv in hdlc.c, which calls fr_rx
to process the frames (control frames are consumed and data frames
are re-received on upper PVC devices).

Cc: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
drivers/net/wan/lapbether: Make skb->protocol consistent with the header 2020-10-07T06:01:26+00:00 Xie He xie.he.0141@gmail.com 2020-09-16T16:49:18+00:00 3ba3fc3e7ea6175423ac8eb53d6e90ed1258ed94 [ Upstream commit 83f9a9c8c1edc222846dc1bde6e3479703e8e5a3 ] This driver is a virtual driver stacked on top of Ethernet interfaces. When this driver transmits data on the Ethernet device, the skb->protocol setting is inconsistent with the Ethernet header prepended to the skb. This causes a user listening on the Ethernet interface with an AF_PACKET socket, to see different sll_protocol values for incoming and outgoing frames, because incoming frames would have this value set by parsing the Ethernet header. This patch changes the skb->protocol value for outgoing Ethernet frames, making it consistent with the Ethernet header prepended. This makes a user listening on the Ethernet device with an AF_PACKET socket, to see the same sll_protocol value for incoming and outgoing frames. Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by: Xie He <xie.he.0141@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 83f9a9c8c1edc222846dc1bde6e3479703e8e5a3 ]

This driver is a virtual driver stacked on top of Ethernet interfaces.

When this driver transmits data on the Ethernet device, the skb->protocol
setting is inconsistent with the Ethernet header prepended to the skb.

This causes a user listening on the Ethernet interface with an AF_PACKET
socket, to see different sll_protocol values for incoming and outgoing
frames, because incoming frames would have this value set by parsing the
Ethernet header.

This patch changes the skb->protocol value for outgoing Ethernet frames,
making it consistent with the Ethernet header prepended. This makes a
user listening on the Ethernet device with an AF_PACKET socket, to see
the same sll_protocol value for incoming and outgoing frames.

Cc: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
rndis_host: increase sleep time in the query-response loop 2020-10-07T06:01:26+00:00 Olympia Giannou ogiannou@gmail.com 2020-09-11T14:17:24+00:00 0bcc3480393bc8aaa820f35a9490af438be90d3f [ Upstream commit 4202c9fdf03d79dedaa94b2c4cf574f25793d669 ] Some WinCE devices face connectivity issues via the NDIS interface. They fail to register, resulting in -110 timeout errors and failures during the probe procedure. In this kind of WinCE devices, the Windows-side ndis driver needs quite more time to be loaded and configured, so that the linux rndis host queries to them fail to be responded correctly on time. More specifically, when INIT is called on the WinCE side - no other requests can be served by the Client and this results in a failed QUERY afterwards. The increase of the waiting time on the side of the linux rndis host in the command-response loop leaves the INIT process to complete and respond to a QUERY, which comes afterwards. The WinCE devices with this special "feature" in their ndis driver are satisfied by this fix. Signed-off-by: Olympia Giannou <olympia.giannou@leica-geosystems.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 4202c9fdf03d79dedaa94b2c4cf574f25793d669 ]

Some WinCE devices face connectivity issues via the NDIS interface. They
fail to register, resulting in -110 timeout errors and failures during the
probe procedure.

In this kind of WinCE devices, the Windows-side ndis driver needs quite
more time to be loaded and configured, so that the linux rndis host queries
to them fail to be responded correctly on time.

More specifically, when INIT is called on the WinCE side - no other
requests can be served by the Client and this results in a failed QUERY
afterwards.

The increase of the waiting time on the side of the linux rndis host in
the command-response loop leaves the INIT process to complete and respond
to a QUERY, which comes afterwards. The WinCE devices with this special
"feature" in their ndis driver are satisfied by this fix.

Signed-off-by: Olympia Giannou <olympia.giannou@leica-geosystems.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
net: dec: de2104x: Increase receive ring size for Tulip 2020-10-07T06:01:26+00:00 Lucy Yan lucyyan@google.com 2020-09-10T19:05:09+00:00 f19ff011027ba1a54d6602b48358be887bfbcd5e [ Upstream commit ee460417d254d941dfea5fb7cff841f589643992 ] Increase Rx ring size to address issue where hardware is reaching the receive work limit. Before: [ 102.223342] de2104x 0000:17:00.0 eth0: rx work limit reached [ 102.245695] de2104x 0000:17:00.0 eth0: rx work limit reached [ 102.251387] de2104x 0000:17:00.0 eth0: rx work limit reached [ 102.267444] de2104x 0000:17:00.0 eth0: rx work limit reached Signed-off-by: Lucy Yan <lucyyan@google.com> Reviewed-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit ee460417d254d941dfea5fb7cff841f589643992 ]

Increase Rx ring size to address issue where hardware is reaching
the receive work limit.

Before:

[  102.223342] de2104x 0000:17:00.0 eth0: rx work limit reached
[  102.245695] de2104x 0000:17:00.0 eth0: rx work limit reached
[  102.251387] de2104x 0000:17:00.0 eth0: rx work limit reached
[  102.267444] de2104x 0000:17:00.0 eth0: rx work limit reached

Signed-off-by: Lucy Yan <lucyyan@google.com>
Reviewed-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
drivers/net/wan/hdlc_fr: Add needed_headroom for PVC devices 2020-10-07T06:01:25+00:00 Xie He xie.he.0141@gmail.com 2020-09-03T00:06:58+00:00 985a56c58c4f5fbea988c3b127780fd89fdf72be [ Upstream commit 44a049c42681de71c783d75cd6e56b4e339488b0 ] PVC devices are virtual devices in this driver stacked on top of the actual HDLC device. They are the devices normal users would use. PVC devices have two types: normal PVC devices and Ethernet-emulating PVC devices. When transmitting data with PVC devices, the ndo_start_xmit function will prepend a header of 4 or 10 bytes. Currently this driver requests this headroom to be reserved for normal PVC devices by setting their hard_header_len to 10. However, this does not work when these devices are used with AF_PACKET/RAW sockets. Also, this driver does not request this headroom for Ethernet-emulating PVC devices (but deals with this problem by reallocating the skb when needed, which is not optimal). This patch replaces hard_header_len with needed_headroom, and set needed_headroom for Ethernet-emulating PVC devices, too. This makes the driver to request headroom for all PVC devices in all cases. Cc: Krzysztof Halasa <khc@pm.waw.pl> Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by: Xie He <xie.he.0141@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 44a049c42681de71c783d75cd6e56b4e339488b0 ]

PVC devices are virtual devices in this driver stacked on top of the
actual HDLC device. They are the devices normal users would use.
PVC devices have two types: normal PVC devices and Ethernet-emulating
PVC devices.

When transmitting data with PVC devices, the ndo_start_xmit function
will prepend a header of 4 or 10 bytes. Currently this driver requests
this headroom to be reserved for normal PVC devices by setting their
hard_header_len to 10. However, this does not work when these devices
are used with AF_PACKET/RAW sockets. Also, this driver does not request
this headroom for Ethernet-emulating PVC devices (but deals with this
problem by reallocating the skb when needed, which is not optimal).

This patch replaces hard_header_len with needed_headroom, and set
needed_headroom for Ethernet-emulating PVC devices, too. This makes
the driver to request headroom for all PVC devices in all cases.

Cc: Krzysztof Halasa <khc@pm.waw.pl>
Cc: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
net: qed: RDMA personality shouldn't fail VF load 2020-10-01T11:18:18+00:00 Dmitry Bogdanov dbogdanov@marvell.com 2020-09-09T17:43:10+00:00 12bea822dbe6e37d2e0c04910f91b56a59c0d5f0 [ Upstream commit ce1cf9e5025f4e2d2198728391f1847b3e168bc6 ] Fix the assert during VF driver installation when the personality is iWARP Fixes: 1fe614d10f45 ("qed: Relax VF firmware requirements") Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit ce1cf9e5025f4e2d2198728391f1847b3e168bc6 ]

Fix the assert during VF driver installation when the personality is iWARP

Fixes: 1fe614d10f45 ("qed: Relax VF firmware requirements")
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
net: qede: Disable aRFS for NPAR and 100G 2020-10-01T11:18:18+00:00 Dmitry Bogdanov dbogdanov@marvell.com 2020-09-09T17:43:09+00:00 7e74a6d6f99cfa9c5dd317d913b9cf5a61644a86 [ Upstream commit 0367f05885b9f21d062447bd2ba1302ba3cc7392 ] In some configurations ARFS cannot be used, so disable it if device is not capable. Fixes: e4917d46a653 ("qede: Add aRFS support") Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 0367f05885b9f21d062447bd2ba1302ba3cc7392 ]

In some configurations ARFS cannot be used, so disable it if device
is not capable.

Fixes: e4917d46a653 ("qede: Add aRFS support")
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
net: qed: Disable aRFS for NPAR and 100G 2020-10-01T11:18:18+00:00 Dmitry Bogdanov dbogdanov@marvell.com 2020-09-09T17:43:08+00:00 82dfe9c32dea40fd1b823fbec515b27834327c9e [ Upstream commit 2d2fe8433796603091ac8ea235b9165ac5a85f9a ] In CMT and NPAR the PF is unknown when the GFS block processes the packet. Therefore cannot use searcher as it has a per PF database, and thus ARFS must be disabled. Fixes: d51e4af5c209 ("qed: aRFS infrastructure support") Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 2d2fe8433796603091ac8ea235b9165ac5a85f9a ]

In CMT and NPAR the PF is unknown when the GFS block processes the
packet. Therefore cannot use searcher as it has a per PF database,
and thus ARFS must be disabled.

Fixes: d51e4af5c209 ("qed: aRFS infrastructure support")
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
mwifiex: Increase AES key storage size to 256 bits 2020-10-01T11:18:16+00:00 Maximilian Luz luzmaximilian@gmail.com 2020-08-25T15:38:29+00:00 a63798d534892d01c0aa20afa5d5893fa822a3d7 [ Upstream commit 4afc850e2e9e781976fb2c7852ce7bac374af938 ] Following commit e18696786548 ("mwifiex: Prevent memory corruption handling keys") the mwifiex driver fails to authenticate with certain networks, specifically networks with 256 bit keys, and repeatedly asks for the password. The kernel log repeats the following lines (id and bssid redacted): mwifiex_pcie 0000:01:00.0: info: trying to associate to '<id>' bssid <bssid> mwifiex_pcie 0000:01:00.0: info: associated to bssid <bssid> successfully mwifiex_pcie 0000:01:00.0: crypto keys added mwifiex_pcie 0000:01:00.0: info: successfully disconnected from <bssid>: reason code 3 Tracking down this problem lead to the overflow check introduced by the aforementioned commit into mwifiex_ret_802_11_key_material_v2(). This check fails on networks with 256 bit keys due to the current storage size for AES keys in struct mwifiex_aes_param being only 128 bit. To fix this issue, increase the storage size for AES keys to 256 bit. Fixes: e18696786548 ("mwifiex: Prevent memory corruption handling keys") Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com> Reported-by: Kaloyan Nikolov <konik98@gmail.com> Tested-by: Kaloyan Nikolov <konik98@gmail.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Tested-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200825153829.38043-1-luzmaximilian@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 4afc850e2e9e781976fb2c7852ce7bac374af938 ]

Following commit e18696786548 ("mwifiex: Prevent memory corruption
handling keys") the mwifiex driver fails to authenticate with certain
networks, specifically networks with 256 bit keys, and repeatedly asks
for the password. The kernel log repeats the following lines (id and
bssid redacted):

    mwifiex_pcie 0000:01:00.0: info: trying to associate to '<id>' bssid <bssid>
    mwifiex_pcie 0000:01:00.0: info: associated to bssid <bssid> successfully
    mwifiex_pcie 0000:01:00.0: crypto keys added
    mwifiex_pcie 0000:01:00.0: info: successfully disconnected from <bssid>: reason code 3

Tracking down this problem lead to the overflow check introduced by the
aforementioned commit into mwifiex_ret_802_11_key_material_v2(). This
check fails on networks with 256 bit keys due to the current storage
size for AES keys in struct mwifiex_aes_param being only 128 bit.

To fix this issue, increase the storage size for AES keys to 256 bit.

Fixes: e18696786548 ("mwifiex: Prevent memory corruption handling keys")
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Reported-by: Kaloyan Nikolov <konik98@gmail.com>
Tested-by: Kaloyan Nikolov <konik98@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Tested-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200825153829.38043-1-luzmaximilian@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
ieee802154/adf7242: check status of adf7242_read_reg 2020-10-01T11:18:16+00:00 Tom Rix trix@redhat.com 2020-08-02T14:23:39+00:00 f77f4586bdd73d0d3b981969182a2aa98c4db0a6 [ Upstream commit e3914ed6cf44bfe1f169e26241f8314556fd1ac1 ] Clang static analysis reports this error adf7242.c:887:6: warning: Assigned value is garbage or undefined len = len_u8; ^ ~~~~~~ len_u8 is set in adf7242_read_reg(lp, 0, &len_u8); When this call fails, len_u8 is not set. So check the return code. Fixes: 7302b9d90117 ("ieee802154/adf7242: Driver for ADF7242 MAC IEEE802154") Signed-off-by: Tom Rix <trix@redhat.com> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Link: https://lore.kernel.org/r/20200802142339.21091-1-trix@redhat.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit e3914ed6cf44bfe1f169e26241f8314556fd1ac1 ]

Clang static analysis reports this error

adf7242.c:887:6: warning: Assigned value is garbage or undefined
        len = len_u8;
            ^ ~~~~~~

len_u8 is set in
       adf7242_read_reg(lp, 0, &len_u8);

When this call fails, len_u8 is not set.

So check the return code.

Fixes: 7302b9d90117 ("ieee802154/adf7242: Driver for ADF7242 MAC IEEE802154")

Signed-off-by: Tom Rix <trix@redhat.com>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Link: https://lore.kernel.org/r/20200802142339.21091-1-trix@redhat.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>