linux-stable.git/drivers/net, branch v5.4.280

octeontx2-af: fix detection of IP layer

2024-07-18T09:40:54+00:00

[ Upstream commit 404dc0fd6fb0bb942b18008c6f8c0320b80aca20 ]

Checksum and length checks are not enabled for IPv4 header with
options and IPv6 with extension headers.
To fix this a change in enum npc_kpu_lc_ltype is required which will
allow adjustment of LTYPE_MASK to detect all types of IP headers.

Fixes: 21e6699e5cd6 ("octeontx2-af: Add NPC KPU profile")
Signed-off-by: Michal Mazur 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

ppp: reject claimed-as-LCP but actually malformed packets

2024-07-18T09:40:53+00:00

[ Upstream commit f2aeb7306a898e1cbd03963d376f4b6656ca2b55 ]

Since 'ppp_async_encode()' assumes valid LCP packets (with code
from 1 to 7 inclusive), add 'ppp_check_packet()' to ensure that
LCP packet has an actual body beyond PPP_LCP header bytes, and
reject claimed-as-LCP but actually malformed data otherwise.

Reported-by: syzbot+ec0723ba9605678b14bf@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=ec0723ba9605678b14bf
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Dmitry Antipov 
Signed-off-by: Paolo Abeni 
Signed-off-by: Sasha Levin

net: ethernet: lantiq_etop: fix double free in detach

2024-07-18T09:40:53+00:00

[ Upstream commit e1533b6319ab9c3a97dad314dd88b3783bc41b69 ]

The number of the currently released descriptor is never incremented
which results in the same skb being released multiple times.

Fixes: 504d4721ee8e ("MIPS: Lantiq: Add ethernet driver")
Reported-by: Joe Perches 
Closes: https://lore.kernel.org/all/fc1bf93d92bb5b2f99c6c62745507cc22f3a7b2d.camel@perches.com/
Signed-off-by: Aleksander Jan Bajkowski 
Reviewed-by: Andrew Lunn 
Link: https://patch.msgid.link/20240708205826.5176-1-olek2@wp.pl
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

net: lantiq_etop: add blank line after declaration

2024-07-18T09:40:53+00:00

[ Upstream commit 4c46625bb586a741b8d0e6bdbddbcb2549fa1d36 ]

This patch adds a missing line after the declaration and
fixes the checkpatch warning:

WARNING: Missing a blank line after declarations
+		int desc;
+		for (desc = 0; desc < LTQ_DESC_NUM; desc++)

Signed-off-by: Aleksander Jan Bajkowski 
Link: https://lore.kernel.org/r/20211228220031.71576-1-olek2@wp.pl
Signed-off-by: Jakub Kicinski 
Stable-dep-of: e1533b6319ab ("net: ethernet: lantiq_etop: fix double free in detach")
Signed-off-by: Sasha Levin

octeontx2-af: Fix incorrect value output on error path in rvu_check_rsrc_availability()

2024-07-18T09:40:53+00:00

[ Upstream commit 442e26af9aa8115c96541026cbfeaaa76c85d178 ]

In rvu_check_rsrc_availability() in case of invalid SSOW req, an incorrect
data is printed to error log. 'req->sso' value is printed instead of
'req->ssow'. Looks like "copy-paste" mistake.

Fix this mistake by replacing 'req->sso' with 'req->ssow'.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 746ea74241fa ("octeontx2-af: Add RVU block LF provisioning support")
Signed-off-by: Aleksandr Mishin 
Reviewed-by: Simon Horman 
Link: https://patch.msgid.link/20240705095317.12640-1-amishin@t-argos.ru
Signed-off-by: Paolo Abeni 
Signed-off-by: Sasha Levin

bnx2x: Fix multiple UBSAN array-index-out-of-bounds

2024-07-18T09:40:52+00:00

commit 134061163ee5ca4759de5c24ca3bd71608891ba7 upstream.

Fix UBSAN warnings that occur when using a system with 32 physical
cpu cores or more, or when the user defines a number of Ethernet
queues greater than or equal to FP_SB_MAX_E1x using the num_queues
module parameter.

Currently there is a read/write out of bounds that occurs on the array
"struct stats_query_entry query" present inside the "bnx2x_fw_stats_req"
struct in "drivers/net/ethernet/broadcom/bnx2x/bnx2x.h".
Looking at the definition of the "struct stats_query_entry query" array:

struct stats_query_entry query[FP_SB_MAX_E1x+
         BNX2X_FIRST_QUEUE_QUERY_IDX];

FP_SB_MAX_E1x is defined as the maximum number of fast path interrupts and
has a value of 16, while BNX2X_FIRST_QUEUE_QUERY_IDX has a value of 3
meaning the array has a total size of 19.
Since accesses to "struct stats_query_entry query" are offset-ted by
BNX2X_FIRST_QUEUE_QUERY_IDX, that means that the total number of Ethernet
queues should not exceed FP_SB_MAX_E1x (16). However one of these queues
is reserved for FCOE and thus the number of Ethernet queues should be set
to [FP_SB_MAX_E1x -1] (15) if FCOE is enabled or [FP_SB_MAX_E1x] (16) if
it is not.

This is also described in a comment in the source code in
drivers/net/ethernet/broadcom/bnx2x/bnx2x.h just above the Macro definition
of FP_SB_MAX_E1x. Below is the part of this explanation that it important
for this patch

/*
  * The total number of L2 queues, MSIX vectors and HW contexts (CIDs) is
  * control by the number of fast-path status blocks supported by the
  * device (HW/FW). Each fast-path status block (FP-SB) aka non-default
  * status block represents an independent interrupts context that can
  * serve a regular L2 networking queue. However special L2 queues such
  * as the FCoE queue do not require a FP-SB and other components like
  * the CNIC may consume FP-SB reducing the number of possible L2 queues
  *
  * If the maximum number of FP-SB available is X then:
  * a. If CNIC is supported it consumes 1 FP-SB thus the max number of
  *    regular L2 queues is Y=X-1
  * b. In MF mode the actual number of L2 queues is Y= (X-1/MF_factor)
  * c. If the FCoE L2 queue is supported the actual number of L2 queues
  *    is Y+1
  * d. The number of irqs (MSIX vectors) is either Y+1 (one extra for
  *    slow-path interrupts) or Y+2 if CNIC is supported (one additional
  *    FP interrupt context for the CNIC).
  * e. The number of HW context (CID count) is always X or X+1 if FCoE
  *    L2 queue is supported. The cid for the FCoE L2 queue is always X.
  */

However this driver also supports NICs that use the E2 controller which can
handle more queues due to having more FP-SB represented by FP_SB_MAX_E2.
Looking at the commits when the E2 support was added, it was originally
using the E1x parameters: commit f2e0899f0f27 ("bnx2x: Add 57712 support").
Back then FP_SB_MAX_E2 was set to 16 the same as E1x. However the driver
was later updated to take full advantage of the E2 instead of having it be
limited to the capabilities of the E1x. But as far as we can tell, the
array "stats_query_entry query" was still limited to using the FP-SB
available to the E1x cards as part of an oversignt when the driver was
updated to take full advantage of the E2, and now with the driver being
aware of the greater queue size supported by E2 NICs, it causes the UBSAN
warnings seen in the stack traces below.

This patch increases the size of the "stats_query_entry query" array by
replacing FP_SB_MAX_E1x with FP_SB_MAX_E2 to be large enough to handle
both types of NICs.

Stack traces:

UBSAN: array-index-out-of-bounds in
       drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c:1529:11
index 20 is out of range for type 'stats_query_entry [19]'
CPU: 12 PID: 858 Comm: systemd-network Not tainted 6.9.0-060900rc7-generic
	     #202405052133
Hardware name: HP ProLiant DL360 Gen9/ProLiant DL360 Gen9,
	       BIOS P89 10/21/2019
Call Trace:
 
 dump_stack_lvl+0x76/0xa0
 dump_stack+0x10/0x20
 __ubsan_handle_out_of_bounds+0xcb/0x110
 bnx2x_prep_fw_stats_req+0x2e1/0x310 [bnx2x]
 bnx2x_stats_init+0x156/0x320 [bnx2x]
 bnx2x_post_irq_nic_init+0x81/0x1a0 [bnx2x]
 bnx2x_nic_load+0x8e8/0x19e0 [bnx2x]
 bnx2x_open+0x16b/0x290 [bnx2x]
 __dev_open+0x10e/0x1d0
RIP: 0033:0x736223927a0a
Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca
      64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00
      f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89
RSP: 002b:00007ffc0bb2ada8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000583df50f9c78 RCX: 0000736223927a0a
RDX: 0000000000000020 RSI: 0000583df50ee510 RDI: 0000000000000003
RBP: 0000583df50d4940 R08: 00007ffc0bb2adb0 R09: 0000000000000080
R10: 0000000000000000 R11: 0000000000000246 R12: 0000583df5103ae0
R13: 000000000000035a R14: 0000583df50f9c30 R15: 0000583ddddddf00

---[ end trace ]---
------------[ cut here ]------------
UBSAN: array-index-out-of-bounds in
       drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c:1546:11
index 28 is out of range for type 'stats_query_entry [19]'
CPU: 12 PID: 858 Comm: systemd-network Not tainted 6.9.0-060900rc7-generic
	     #202405052133
Hardware name: HP ProLiant DL360 Gen9/ProLiant DL360 Gen9,
	       BIOS P89 10/21/2019
Call Trace:

dump_stack_lvl+0x76/0xa0
dump_stack+0x10/0x20
__ubsan_handle_out_of_bounds+0xcb/0x110
bnx2x_prep_fw_stats_req+0x2fd/0x310 [bnx2x]
bnx2x_stats_init+0x156/0x320 [bnx2x]
bnx2x_post_irq_nic_init+0x81/0x1a0 [bnx2x]
bnx2x_nic_load+0x8e8/0x19e0 [bnx2x]
bnx2x_open+0x16b/0x290 [bnx2x]
__dev_open+0x10e/0x1d0
RIP: 0033:0x736223927a0a
Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca
      64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00
      f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89
RSP: 002b:00007ffc0bb2ada8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000583df50f9c78 RCX: 0000736223927a0a
RDX: 0000000000000020 RSI: 0000583df50ee510 RDI: 0000000000000003
RBP: 0000583df50d4940 R08: 00007ffc0bb2adb0 R09: 0000000000000080
R10: 0000000000000000 R11: 0000000000000246 R12: 0000583df5103ae0
R13: 000000000000035a R14: 0000583df50f9c30 R15: 0000583ddddddf00
 
---[ end trace ]---
------------[ cut here ]------------
UBSAN: array-index-out-of-bounds in
       drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:1895:8
index 29 is out of range for type 'stats_query_entry [19]'
CPU: 13 PID: 163 Comm: kworker/u96:1 Not tainted 6.9.0-060900rc7-generic
	     #202405052133
Hardware name: HP ProLiant DL360 Gen9/ProLiant DL360 Gen9,
	       BIOS P89 10/21/2019
Workqueue: bnx2x bnx2x_sp_task [bnx2x]
Call Trace:
 
 dump_stack_lvl+0x76/0xa0
 dump_stack+0x10/0x20
 __ubsan_handle_out_of_bounds+0xcb/0x110
 bnx2x_iov_adjust_stats_req+0x3c4/0x3d0 [bnx2x]
 bnx2x_storm_stats_post.part.0+0x4a/0x330 [bnx2x]
 ? bnx2x_hw_stats_post+0x231/0x250 [bnx2x]
 bnx2x_stats_start+0x44/0x70 [bnx2x]
 bnx2x_stats_handle+0x149/0x350 [bnx2x]
 bnx2x_attn_int_asserted+0x998/0x9b0 [bnx2x]
 bnx2x_sp_task+0x491/0x5c0 [bnx2x]
 process_one_work+0x18d/0x3f0
 
---[ end trace ]---

Fixes: 50f0a562f8cc ("bnx2x: add fcoe statistics")
Signed-off-by: Ghadi Elie Rahme 
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20240627111405.1037812-1-ghadi.rahme@canonical.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

can: kvaser_usb: Explicitly initialize family in leafimx driver_info struct

2024-07-18T09:40:51+00:00

commit 19d5b2698c35b2132a355c67b4d429053804f8cc upstream.

Explicitly set the 'family' driver_info struct member for leafimx.
Previously, the correct operation relied on KVASER_LEAF being the first
defined value in enum kvaser_usb_leaf_family.

Fixes: e6c80e601053 ("can: kvaser_usb: kvaser_usb_leaf: fix CAN clock frequency regression")
Signed-off-by: Jimmy Assarsson 
Link: https://lore.kernel.org/all/20240628194529.312968-1-extja@kvaser.com
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde 
Signed-off-by: Greg Kroah-Hartman

bonding: Fix out-of-bounds read in bond_option_arp_ip_targets_set()

2024-07-18T09:40:50+00:00

[ Upstream commit e271ff53807e8f2c628758290f0e499dbe51cb3d ]

In function bond_option_arp_ip_targets_set(), if newval->string is an
empty string, newval->string+1 will point to the byte after the
string, causing an out-of-bound read.

BUG: KASAN: slab-out-of-bounds in strlen+0x7d/0xa0 lib/string.c:418
Read of size 1 at addr ffff8881119c4781 by task syz-executor665/8107
CPU: 1 PID: 8107 Comm: syz-executor665 Not tainted 6.7.0-rc7 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Call Trace:
 
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0xd9/0x150 lib/dump_stack.c:106
 print_address_description mm/kasan/report.c:364 [inline]
 print_report+0xc1/0x5e0 mm/kasan/report.c:475
 kasan_report+0xbe/0xf0 mm/kasan/report.c:588
 strlen+0x7d/0xa0 lib/string.c:418
 __fortify_strlen include/linux/fortify-string.h:210 [inline]
 in4_pton+0xa3/0x3f0 net/core/utils.c:130
 bond_option_arp_ip_targets_set+0xc2/0x910
drivers/net/bonding/bond_options.c:1201
 __bond_opt_set+0x2a4/0x1030 drivers/net/bonding/bond_options.c:767
 __bond_opt_set_notify+0x48/0x150 drivers/net/bonding/bond_options.c:792
 bond_opt_tryset_rtnl+0xda/0x160 drivers/net/bonding/bond_options.c:817
 bonding_sysfs_store_option+0xa1/0x120 drivers/net/bonding/bond_sysfs.c:156
 dev_attr_store+0x54/0x80 drivers/base/core.c:2366
 sysfs_kf_write+0x114/0x170 fs/sysfs/file.c:136
 kernfs_fop_write_iter+0x337/0x500 fs/kernfs/file.c:334
 call_write_iter include/linux/fs.h:2020 [inline]
 new_sync_write fs/read_write.c:491 [inline]
 vfs_write+0x96a/0xd80 fs/read_write.c:584
 ksys_write+0x122/0x250 fs/read_write.c:637
 do_syscall_x64 arch/x86/entry/common.c:52 [inline]
 do_syscall_64+0x40/0x110 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x63/0x6b
---[ end trace ]---

Fix it by adding a check of string length before using it.

Fixes: f9de11a16594 ("bonding: add ip checks when store ip target")
Signed-off-by: Yue Sun 
Signed-off-by: Simon Horman 
Acked-by: Jay Vosburgh 
Reviewed-by: Hangbin Liu 
Link: https://patch.msgid.link/20240702-bond-oob-v6-1-2dfdba195c19@kernel.org
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

net: dsa: mv88e6xxx: Correct check for empty list

2024-07-18T09:40:48+00:00

[ Upstream commit 4c7f3950a9fd53a62b156c0fe7c3a2c43b0ba19b ]

Since commit a3c53be55c95 ("net: dsa: mv88e6xxx: Support multiple MDIO
busses") mv88e6xxx_default_mdio_bus() has checked that the
return value of list_first_entry() is non-NULL.

This appears to be intended to guard against the list chip->mdios being
empty.  However, it is not the correct check as the implementation of
list_first_entry is not designed to return NULL for empty lists.

Instead, use list_first_entry_or_null() which does return NULL if the
list is empty.

Flagged by Smatch.
Compile tested only.

Reviewed-by: Andrew Lunn 
Signed-off-by: Simon Horman 
Link: https://lore.kernel.org/r/20240430-mv88e6xx-list_empty-v3-1-c35c69d88d2e@kernel.org
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

net: usb: ax88179_178a: improve link status logs

2024-07-05T07:08:30+00:00

commit 058722ee350c0bdd664e467156feb2bf5d9cc271 upstream.

Avoid spurious link status logs that may ultimately be wrong; for example,
if the link is set to down with the cable plugged, then the cable is
unplugged and after this the link is set to up, the last new log that is
appearing is incorrectly telling that the link is up.

In order to avoid errors, show link status logs after link_reset
processing, and in order to avoid spurious as much as possible, only show
the link loss when some link status change is detected.

cc: stable@vger.kernel.org
Fixes: e2ca90c276e1 ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver")
Signed-off-by: Jose Ignacio Tornos Martinez 
Reviewed-by: Simon Horman 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman