linux-stable.git/drivers/net, branch v5.4.266

ethernet: atheros: fix a memleak in atl1e_setup_ring_resources

2024-01-08T10:29:44+00:00

[ Upstream commit 309fdb1c33fe726d92d0030481346f24e1b01f07 ]

In the error handling of 'offset > adapter->ring_size', the
tx_ring->tx_buffer allocated by kzalloc should be freed,
instead of 'goto failed' instantly.

Fixes: a6a5325239c2 ("atl1e: Atheros L1E Gigabit Ethernet driver")
Signed-off-by: Zhipeng Lu 
Reviewed-by: Suman Ghosh 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

net/mlx5e: Correct snprintf truncation handling for fw_version buffer used by representors

2024-01-08T10:29:43+00:00

[ Upstream commit b13559b76157de9d74f04d3ca0e49d69de3b5675 ]

snprintf returns the length of the formatted string, excluding the trailing
null, without accounting for truncation. This means that is the return
value is greater than or equal to the size parameter, the fw_version string
was truncated.

Link: https://docs.kernel.org/core-api/kernel-api.html#c.snprintf
Fixes: 1b2bd0c0264f ("net/mlx5e: Check return value of snprintf writing to fw_version buffer for representors")
Signed-off-by: Rahul Rameshbabu 
Reviewed-by: Simon Horman 
Signed-off-by: Saeed Mahameed 
Signed-off-by: Sasha Levin

net/mlx5: Fix fw tracer first block check

2024-01-08T10:29:43+00:00

[ Upstream commit 4261edf11cb7c9224af713a102e5616329306932 ]

While handling new traces, to verify it is not the first block being
written, last_timestamp is checked. But instead of checking it is non
zero it is verified to be zero. Fix to verify last_timestamp is not
zero.

Fixes: c71ad41ccb0c ("net/mlx5: FW tracer, events handling")
Signed-off-by: Moshe Shemesh 
Reviewed-by: Feras Daoud 
Signed-off-by: Saeed Mahameed 
Signed-off-by: Sasha Levin

net/mlx5: improve some comments

2024-01-08T10:29:43+00:00

[ Upstream commit 6533380dfd003ea7636cb5672f4f85124b56328b ]

Replaced "its" with "it's".

Signed-off-by: Hu Haowen 
Signed-off-by: Saeed Mahameed 
Stable-dep-of: 4261edf11cb7 ("net/mlx5: Fix fw tracer first block check")
Signed-off-by: Sasha Levin

Revert "net/mlx5e: fix double free of encap_header"

2024-01-08T10:29:43+00:00

[ Upstream commit 5d089684dc434a31e08d32f0530066d0025c52e4 ]

This reverts commit 6f9b1a0731662648949a1c0587f6acb3b7f8acf1.

This patch is causing a null ptr issue, the proper fix is in the next
patch.

Fixes: 6f9b1a073166 ("net/mlx5e: fix double free of encap_header")
Signed-off-by: Vlad Buslov 
Signed-off-by: Saeed Mahameed 
Signed-off-by: Sasha Levin

team: Fix use-after-free when an option instance allocation fails

2023-12-20T14:41:25+00:00

commit c12296bbecc488623b7d1932080e394d08f3226b upstream.

In __team_options_register, team_options are allocated and appended to
the team's option_list.
If one option instance allocation fails, the "inst_rollback" cleanup
path frees the previously allocated options but doesn't remove them from
the team's option_list.
This leaves dangling pointers that can be dereferenced later by other
parts of the team driver that iterate over options.

This patch fixes the cleanup path to remove the dangling pointers from
the list.

As far as I can tell, this uaf doesn't have much security implications
since it would be fairly hard to exploit (an attacker would need to make
the allocation of that specific small object fail) but it's still nice
to fix.

Cc: stable@vger.kernel.org
Fixes: 80f7c6683fe0 ("team: add support for per-port options")
Signed-off-by: Florent Revest 
Reviewed-by: Jiri Pirko 
Reviewed-by: Hangbin Liu 
Link: https://lore.kernel.org/r/20231206123719.1963153-1-revest@chromium.org
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

net: usb: qmi_wwan: claim interface 4 for ZTE MF290

2023-12-20T14:41:23+00:00

[ Upstream commit 99360d9620f09fb8bc15548d855011bbb198c680 ]

Interface 4 is used by for QMI interface in stock firmware of MF28D, the
router which uses MF290 modem. Rebind it to qmi_wwan after freeing it up
from option driver.
The proper configuration is:

Interface mapping is:
0: QCDM, 1: (unknown), 2: AT (PCUI), 2: AT (Modem), 4: QMI

T:  Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  4 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=19d2 ProdID=0189 Rev= 0.00
S:  Manufacturer=ZTE, Incorporated
S:  Product=ZTE LTE Technologies MSM
C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=84(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E:  Ad=86(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms

Cc: Bjørn Mork 
Signed-off-by: Lech Perczak 
Link: https://lore.kernel.org/r/20231117231918.100278-3-lech.perczak@gmail.com
Signed-off-by: Paolo Abeni 
Signed-off-by: Sasha Levin

usb: aqc111: check packet for fixup for true limit

2023-12-20T14:41:19+00:00

[ Upstream commit ccab434e674ca95d483788b1895a70c21b7f016a ]

If a device sends a packet that is inbetween 0
and sizeof(u64) the value passed to skb_trim()
as length will wrap around ending up as some very
large value.

The driver will then proceed to parse the header
located at that position, which will either oops or
process some random value.

The fix is to check against sizeof(u64) rather than
0, which the driver currently does. The issue exists
since the introduction of the driver.

Signed-off-by: Oliver Neukum 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

net: stmmac: Handle disabled MDIO busses from devicetree

2023-12-20T14:41:18+00:00

[ Upstream commit e23c0d21ce9234fbc31ece35663ababbb83f9347 ]

Many hardware configurations have the MDIO bus disabled, and are instead
using some other MDIO bus to talk to the MAC's phy.

of_mdiobus_register() returns -ENODEV in this case. Let's handle it
gracefully instead of failing to probe the MAC.

Fixes: 47dd7a540b8a ("net: add support for STMicroelectronics Ethernet controllers.")
Signed-off-by: Andrew Halaney 
Reviewed-by: Serge Semin 
Link: https://lore.kernel.org/r/20231212-b4-stmmac-handle-mdio-enodev-v2-1-600171acf79f@redhat.com
Signed-off-by: Paolo Abeni 
Signed-off-by: Sasha Levin

net: stmmac: use dev_err_probe() for reporting mdio bus registration failure

2023-12-20T14:41:17+00:00

[ Upstream commit 839612d23ffd933174db911ce56dc3f3ca883ec5 ]

I have a board where these two lines are always printed during boot:

   imx-dwmac 30bf0000.ethernet: Cannot register the MDIO bus
   imx-dwmac 30bf0000.ethernet: stmmac_dvr_probe: MDIO bus (id: 1) registration failed

It's perfectly fine, and the device is successfully (and silently, as
far as the console goes) probed later.

Use dev_err_probe() instead, which will demote these messages to debug
level (thus removing the alarming messages from the console) when the
error is -EPROBE_DEFER, and also has the advantage of including the
error code if/when it happens to be something other than -EPROBE_DEFER.

While here, add the missing \n to one of the format strings.

Signed-off-by: Rasmus Villemoes 
Link: https://lore.kernel.org/r/20220602074840.1143360-1-linux@rasmusvillemoes.dk
Signed-off-by: Jakub Kicinski 
Stable-dep-of: e23c0d21ce92 ("net: stmmac: Handle disabled MDIO busses from devicetree")
Signed-off-by: Sasha Levin