linux-stable.git/drivers/net, branch v5.4.255

ibmveth: Use dcbf rather than dcbfl

2023-08-30T14:27:24+00:00

commit bfedba3b2c7793ce127680bc8f70711e05ec7a17 upstream.

When building for power4, newer binutils don't recognise the "dcbfl"
extended mnemonic.

dcbfl RA, RB is equivalent to dcbf RA, RB, 1.

Switch to "dcbf" to avoid the build error.

Signed-off-by: Michael Ellerman 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

bonding: fix macvlan over alb bond support

2023-08-30T14:27:24+00:00

[ Upstream commit e74216b8def3803e98ae536de78733e9d7f3b109 ]

The commit 14af9963ba1e ("bonding: Support macvlans on top of tlb/rlb mode
bonds") aims to enable the use of macvlans on top of rlb bond mode. However,
the current rlb bond mode only handles ARP packets to update remote neighbor
entries. This causes an issue when a macvlan is on top of the bond, and
remote devices send packets to the macvlan using the bond's MAC address
as the destination. After delivering the packets to the macvlan, the macvlan
will rejects them as the MAC address is incorrect. Consequently, this commit
makes macvlan over bond non-functional.

To address this problem, one potential solution is to check for the presence
of a macvlan port on the bond device using netif_is_macvlan_port(bond->dev)
and return NULL in the rlb_arp_xmit() function. However, this approach
doesn't fully resolve the situation when a VLAN exists between the bond and
macvlan.

So let's just do a partial revert for commit 14af9963ba1e in rlb_arp_xmit().
As the comment said, Don't modify or load balance ARPs that do not originate
locally.

Fixes: 14af9963ba1e ("bonding: Support macvlans on top of tlb/rlb mode bonds")
Reported-by: susan.zheng@veritas.com
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2117816
Signed-off-by: Hangbin Liu 
Acked-by: Jay Vosburgh 
Signed-off-by: Paolo Abeni 
Signed-off-by: Sasha Levin

igb: Avoid starting unnecessary workqueues

2023-08-30T14:27:24+00:00

[ Upstream commit b888c510f7b3d64ca75fc0f43b4a4bd1a611312f ]

If ptp_clock_register() fails or CONFIG_PTP isn't enabled, avoid starting
PTP related workqueues.

In this way we can fix this:
 BUG: unable to handle page fault for address: ffffc9000440b6f8
 #PF: supervisor read access in kernel mode
 #PF: error_code(0x0000) - not-present page
 PGD 100000067 P4D 100000067 PUD 1001e0067 PMD 107dc5067 PTE 0
 Oops: 0000 [#1] PREEMPT SMP
 [...]
 Workqueue: events igb_ptp_overflow_check
 RIP: 0010:igb_rd32+0x1f/0x60
 [...]
 Call Trace:
  igb_ptp_read_82580+0x20/0x50
  timecounter_read+0x15/0x60
  igb_ptp_overflow_check+0x1a/0x50
  process_one_work+0x1cb/0x3c0
  worker_thread+0x53/0x3f0
  ? rescuer_thread+0x370/0x370
  kthread+0x142/0x160
  ? kthread_associate_blkcg+0xc0/0xc0
  ret_from_fork+0x1f/0x30

Fixes: 1f6e8178d685 ("igb: Prevent dropped Tx timestamps via work items and interrupts.")
Fixes: d339b1331616 ("igb: add PTP Hardware Clock code")
Signed-off-by: Alessio Igor Bogani 
Tested-by: Arpana Arland  (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen 
Reviewed-by: Simon Horman 
Link: https://lore.kernel.org/r/20230821171927.2203644-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

net: validate veth and vxcan peer ifindexes

2023-08-30T14:27:24+00:00

[ Upstream commit f534f6581ec084fe94d6759f7672bd009794b07e ]

veth and vxcan need to make sure the ifindexes of the peer
are not negative, core does not validate this.

Using iproute2 with user-space-level checking removed:

Before:

  # ./ip link add index 10 type veth peer index -1
  # ip link show
  1: lo:  mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
  2: enp1s0:  mtu 1500 qdisc fq_codel state UP mode DEFAULT group default qlen 1000
    link/ether 52:54:00:74:b2:03 brd ff:ff:ff:ff:ff:ff
  10: veth1@veth0:  mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
    link/ether 8a:90:ff:57:6d:5d brd ff:ff:ff:ff:ff:ff
  -1: veth0@veth1:  mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
    link/ether ae:ed:18:e6:fa:7f brd ff:ff:ff:ff:ff:ff

Now:

  $ ./ip link add index 10 type veth peer index -1
  Error: ifindex can't be negative.

This problem surfaced in net-next because an explicit WARN()
was added, the root cause is older.

Fixes: e6f8f1a739b6 ("veth: Allow to create peer link with given ifindex")
Fixes: a8f820a380a2 ("can: add Virtual CAN Tunnel driver (vxcan)")
Reported-by: syzbot+5ba06978f34abb058571@syzkaller.appspotmail.com
Signed-off-by: Jakub Kicinski 
Reviewed-by: Eric Dumazet 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

net: bcmgenet: Fix return value check for fixed_phy_register()

2023-08-30T14:27:24+00:00

[ Upstream commit 32bbe64a1386065ab2aef8ce8cae7c689d0add6e ]

The fixed_phy_register() function returns error pointers and never
returns NULL. Update the checks accordingly.

Fixes: b0ba512e25d7 ("net: bcmgenet: enable driver to work without a device tree")
Signed-off-by: Ruan Jinjie 
Reviewed-by: Leon Romanovsky 
Acked-by: Doug Berger 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

net: bgmac: Fix return value check for fixed_phy_register()

2023-08-30T14:27:23+00:00

[ Upstream commit 23a14488ea5882dea5851b65c9fce2127ee8fcad ]

The fixed_phy_register() function returns error pointers and never
returns NULL. Update the checks accordingly.

Fixes: c25b23b8a387 ("bgmac: register fixed PHY for ARM BCM470X / BCM5301X chipsets")
Signed-off-by: Ruan Jinjie 
Reviewed-by: Andrew Lunn 
Reviewed-by: Leon Romanovsky 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

ipvlan: Fix a reference count leak warning in ipvlan_ns_exit()

2023-08-30T14:27:23+00:00

[ Upstream commit 043d5f68d0ccdda91029b4b6dce7eeffdcfad281 ]

There are two network devices(veth1 and veth3) in ns1, and ipvlan1 with
L3S mode and ipvlan2 with L2 mode are created based on them as
figure (1). In this case, ipvlan_register_nf_hook() will be called to
register nf hook which is needed by ipvlans in L3S mode in ns1 and value
of ipvl_nf_hook_refcnt is set to 1.

(1)
           ns1                           ns2
      ------------                  ------------

   veth1--ipvlan1 (L3S)

   veth3--ipvlan2 (L2)

(2)
           ns1                           ns2
      ------------                  ------------

   veth1--ipvlan1 (L3S)

         ipvlan2 (L2)                  veth3
     |                                  |
     |------->-------->--------->--------
                    migrate

When veth3 migrates from ns1 to ns2 as figure (2), veth3 will register in
ns2 and calls call_netdevice_notifiers with NETDEV_REGISTER event:

dev_change_net_namespace
    call_netdevice_notifiers
        ipvlan_device_event
            ipvlan_migrate_l3s_hook
                ipvlan_register_nf_hook(newnet)      (I)
                ipvlan_unregister_nf_hook(oldnet)    (II)

In function ipvlan_migrate_l3s_hook(), ipvl_nf_hook_refcnt in ns1 is not 0
since veth1 with ipvlan1 still in ns1, (I) and (II) will be called to
register nf_hook in ns2 and unregister nf_hook in ns1. As a result,
ipvl_nf_hook_refcnt in ns1 is decreased incorrectly and this in ns2
is increased incorrectly. When the second net namespace is removed, a
reference count leak warning in ipvlan_ns_exit() will be triggered.

This patch add a check before ipvlan_migrate_l3s_hook() is called. The
warning can be triggered as follows:

$ ip netns add ns1
$ ip netns add ns2
$ ip netns exec ns1 ip link add veth1 type veth peer name veth2
$ ip netns exec ns1 ip link add veth3 type veth peer name veth4
$ ip netns exec ns1 ip link add ipv1 link veth1 type ipvlan mode l3s
$ ip netns exec ns1 ip link add ipv2 link veth3 type ipvlan mode l2
$ ip netns exec ns1 ip link set veth3 netns ns2
$ ip net del ns2

Fixes: 3133822f5ac1 ("ipvlan: use pernet operations and restrict l3s hooks to master netns")
Signed-off-by: Lu Wei 
Reviewed-by: Florian Westphal 
Link: https://lore.kernel.org/r/20230817145449.141827-1-luwei32@huawei.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

octeontx2-af: SDP: fix receive link config

2023-08-30T14:27:23+00:00

[ Upstream commit 05f3d5bc23524bed6f043dfe6b44da687584f9fb ]

On SDP interfaces, frame oversize and undersize errors are
observed as driver is not considering packet sizes of all
subscribers of the link before updating the link config.

This patch fixes the same.

Fixes: 9b7dd87ac071 ("octeontx2-af: Support to modify min/max allowed packet lengths")
Signed-off-by: Hariprasad Kelam 
Signed-off-by: Sunil Goutham 
Reviewed-by: Leon Romanovsky 
Link: https://lore.kernel.org/r/20230817063006.10366-1-hkelam@marvell.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

net: phy: broadcom: stub c45 read/write for 54810

2023-08-30T14:27:20+00:00

commit 096516d092d54604d590827d05b1022c8f326639 upstream.

The 54810 does not support c45. The mmd_phy_indirect accesses return
arbirtary values leading to odd behavior like saying it supports EEE
when it doesn't. We also see that reading/writing these non-existent
MMD registers leads to phy instability in some cases.

Fixes: b14995ac2527 ("net: phy: broadcom: Add BCM54810 PHY entry")
Signed-off-by: Justin Chen 
Reviewed-by: Florian Fainelli 
Link: https://lore.kernel.org/r/1691901708-28650-1-git-send-email-justin.chen@broadcom.com
Signed-off-by: Jakub Kicinski 
[florian: resolved conflicts in 5.4]
Signed-off-by: Florian Fainelli 
Signed-off-by: Greg Kroah-Hartman

virtio-net: set queues after driver_ok

2023-08-30T14:27:19+00:00

commit 51b813176f098ff61bd2833f627f5319ead098a5 upstream.

Commit 25266128fe16 ("virtio-net: fix race between set queues and
probe") tries to fix the race between set queues and probe by calling
_virtnet_set_queues() before DRIVER_OK is set. This violates virtio
spec. Fixing this by setting queues after virtio_device_ready().

Note that rtnl needs to be held for userspace requests to change the
number of queues. So we are serialized in this way.

Fixes: 25266128fe16 ("virtio-net: fix race between set queues and probe")
Reported-by: Dragos Tatulea 
Acked-by: Michael S. Tsirkin 
Signed-off-by: Jason Wang 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman