linux-stable.git/drivers/net, branch v5.4.246 Linux kernel stable tree wifi: rtlwifi: 8192de: correct checking of IQK reload 2023-06-09T08:29:04+00:00 Ping-Ke Shih pkshih@realtek.com 2022-08-01T11:33:45+00:00 914bf541c3bb8a87f6930ab0a3d49b4914b0c517 commit 93fbc1ebd978cf408ef5765e9c1630fce9a8621b upstream. Since IQK could spend time, we make a cache of IQK result matrix that looks like iqk_matrix[channel_idx].val[x][y], and we can reload the matrix if we have made a cache. To determine a cache is made, we check iqk_matrix[channel_idx].val[0][0]. The initial commit 7274a8c22980 ("rtlwifi: rtl8192de: Merge phy routines") make a mistake that checks incorrect iqk_matrix[channel_idx].val[0] that is always true, and this mistake is found by commit ee3db469dd31 ("wifi: rtlwifi: remove always-true condition pointed out by GCC 12"), so I recall the vendor driver to find fix and apply the correctness. Fixes: 7274a8c22980 ("rtlwifi: rtl8192de: Merge phy routines") Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220801113345.42016-1-pkshih@realtek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 93fbc1ebd978cf408ef5765e9c1630fce9a8621b upstream.

Since IQK could spend time, we make a cache of IQK result matrix that looks
like iqk_matrix[channel_idx].val[x][y], and we can reload the matrix if we
have made a cache. To determine a cache is made, we check
iqk_matrix[channel_idx].val[0][0].

The initial commit 7274a8c22980 ("rtlwifi: rtl8192de: Merge phy routines")
make a mistake that checks incorrect iqk_matrix[channel_idx].val[0] that
is always true, and this mistake is found by commit ee3db469dd31
("wifi: rtlwifi: remove always-true condition pointed out by GCC 12"), so
I recall the vendor driver to find fix and apply the correctness.

Fixes: 7274a8c22980 ("rtlwifi: rtl8192de: Merge phy routines")
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220801113345.42016-1-pkshih@realtek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
wifi: rtlwifi: remove always-true condition pointed out by GCC 12 2023-06-09T08:29:02+00:00 Jakub Kicinski kuba@kernel.org 2022-05-20T19:43:15+00:00 9d8f5797d79146ca4c558a4f260e4b08d59a4874 commit ee3db469dd317e82f57b13aa3bc61be5cb60c2b4 upstream. The .value is a two-dim array, not a pointer. struct iqk_matrix_regs { bool iqk_done; long value[1][IQK_MATRIX_REG_NUM]; }; Acked-by: Kalle Valo <kvalo@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit ee3db469dd317e82f57b13aa3bc61be5cb60c2b4 upstream.

The .value is a two-dim array, not a pointer.

struct iqk_matrix_regs {
	bool iqk_done;
        long value[1][IQK_MATRIX_REG_NUM];
};

Acked-by: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
treewide: Remove uninitialized_var() usage 2023-06-09T08:29:01+00:00 Kees Cook keescook@chromium.org 2020-06-03T20:09:38+00:00 0638dcc7e75fbb766761e7b4694d0f0f141bbbd1 commit 3f649ab728cda8038259d8f14492fe400fbab911 upstream. Using uninitialized_var() is dangerous as it papers over real bugs[1] (or can in the future), and suppresses unrelated compiler warnings (e.g. "unused variable"). If the compiler thinks it is uninitialized, either simply initialize the variable or make compiler changes. In preparation for removing[2] the[3] macro[4], remove all remaining needless uses with the following script: git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \ xargs perl -pi -e \ 's/\buninitialized_var\(([^\)]+)\)/\1/g; s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;' drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid pathological white-space. No outstanding warnings were found building allmodconfig with GCC 9.3.0 for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64, alpha, and m68k. [1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/ [2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/ [3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/ [4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/ Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5 Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 3f649ab728cda8038259d8f14492fe400fbab911 upstream.

Using uninitialized_var() is dangerous as it papers over real bugs[1]
(or can in the future), and suppresses unrelated compiler warnings
(e.g. "unused variable"). If the compiler thinks it is uninitialized,
either simply initialize the variable or make compiler changes.

In preparation for removing[2] the[3] macro[4], remove all remaining
needless uses with the following script:

git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \
	xargs perl -pi -e \
		's/\buninitialized_var\(([^\)]+)\)/\1/g;
		 s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;'

drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid
pathological white-space.

No outstanding warnings were found building allmodconfig with GCC 9.3.0
for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64,
alpha, and m68k.

[1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/
[2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/
[3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/
[4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/

Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5
Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB
Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers
Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
eth: sun: cassini: remove dead code 2023-06-09T08:29:01+00:00 Martin Liška mliska@suse.cz 2022-05-18T07:18:53+00:00 d069c7ce39951c226beeda3a0bb8f8a3c9db1d48 commit 32329216ca1d6ee29c41215f18b3053bb6158541 upstream. Fixes the following GCC warning: drivers/net/ethernet/sun/cassini.c:1316:29: error: comparison between two arrays [-Werror=array-compare] drivers/net/ethernet/sun/cassini.c:3783:34: error: comparison between two arrays [-Werror=array-compare] Note that 2 arrays should be compared by comparing of their addresses: note: use ‘&cas_prog_workaroundtab[0] == &cas_prog_null[0]’ to compare the addresses Signed-off-by: Martin Liska <mliska@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 32329216ca1d6ee29c41215f18b3053bb6158541 upstream.

Fixes the following GCC warning:

drivers/net/ethernet/sun/cassini.c:1316:29: error: comparison between two arrays [-Werror=array-compare]
drivers/net/ethernet/sun/cassini.c:3783:34: error: comparison between two arrays [-Werror=array-compare]

Note that 2 arrays should be compared by comparing of their addresses:
note: use ‘&cas_prog_workaroundtab[0] == &cas_prog_null[0]’ to compare the addresses

Signed-off-by: Martin Liska <mliska@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
net: usb: qmi_wwan: Set DTR quirk for BroadMobi BM818 2023-06-09T08:29:00+00:00 Sebastian Krzyszkowiak sebastian.krzyszkowiak@puri.sm 2023-05-26T14:38:11+00:00 ac388cbbd97ce845cac9ea564d867a7884c2416b commit 36936a56e1814f6c526fe71fbf980beab4f5577a upstream. BM818 is based on Qualcomm MDM9607 chipset. Fixes: 9a07406b00cd ("net: usb: qmi_wwan: Add the BroadMobi BM818 card") Cc: stable@vger.kernel.org Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm> Acked-by: Bjørn Mork <bjorn@mork.no> Link: https://lore.kernel.org/r/20230526-bm818-dtr-v1-1-64bbfa6ba8af@puri.sm Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 36936a56e1814f6c526fe71fbf980beab4f5577a upstream.

BM818 is based on Qualcomm MDM9607 chipset.

Fixes: 9a07406b00cd ("net: usb: qmi_wwan: Add the BroadMobi BM818 card")
Cc: stable@vger.kernel.org
Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Acked-by: Bjørn Mork <bjorn@mork.no>
Link: https://lore.kernel.org/r/20230526-bm818-dtr-v1-1-64bbfa6ba8af@puri.sm
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
wifi: b43: fix incorrect __packed annotation 2023-06-09T08:28:58+00:00 Arnd Bergmann arnd@arndb.de 2023-05-16T18:34:22+00:00 f7e62f1b7229835eefa2f82b84fb6441867fc9b0 [ Upstream commit 212457ccbd60dba34f965e4ffbe62f0e4f970538 ] clang warns about an unpacked structure inside of a packed one: drivers/net/wireless/broadcom/b43/b43.h:654:4: error: field data within 'struct b43_iv' is less aligned than 'union (unnamed union at /home/arnd/arm-soc/drivers/net/wireless/broadcom/b43/b43.h:651:2)' and is usually due to 'struct b43_iv' being packed, which can lead to unaligned accesses [-Werror,-Wunaligned-access] The problem here is that the anonymous union has the default alignment from its members, apparently because the original author mixed up the placement of the __packed attribute by placing it next to the struct member rather than the union definition. As the struct itself is also marked as __packed, there is no need to mark its members, so just move the annotation to the inner type instead. As Michael noted, the same problem is present in b43legacy, so change both at the same time. Acked-by: Michael Büsch <m@bues.ch> Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Link: https://lore.kernel.org/oe-kbuild-all/202305160749.ay1HAoyP-lkp@intel.com/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230516183442.536589-1-arnd@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 212457ccbd60dba34f965e4ffbe62f0e4f970538 ]

clang warns about an unpacked structure inside of a packed one:

drivers/net/wireless/broadcom/b43/b43.h:654:4: error: field data within 'struct b43_iv' is less aligned than 'union (unnamed union at /home/arnd/arm-soc/drivers/net/wireless/broadcom/b43/b43.h:651:2)' and is usually due to 'struct b43_iv' being packed, which can lead to unaligned accesses [-Werror,-Wunaligned-access]

The problem here is that the anonymous union has the default alignment
from its members, apparently because the original author mixed up the
placement of the __packed attribute by placing it next to the struct
member rather than the union definition. As the struct itself is
also marked as __packed, there is no need to mark its members, so just
move the annotation to the inner type instead.

As Michael noted, the same problem is present in b43legacy, so
change both at the same time.

Acked-by: Michael Büsch <m@bues.ch>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
Link: https://lore.kernel.org/oe-kbuild-all/202305160749.ay1HAoyP-lkp@intel.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230516183442.536589-1-arnd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
wifi: rtl8xxxu: fix authentication timeout due to incorrect RCR value 2023-06-09T08:28:58+00:00 Yun Lu luyun@kylinos.cn 2023-05-12T01:20:55+00:00 a39f24357fdc9ffbe024785704f8867298d48398 [ Upstream commit 20429444e653ee8242dfbf815c0c37866beb371b ] When using rtl8192cu with rtl8xxxu driver to connect wifi, there is a probability of failure, which shows "authentication with ... timed out". Through debugging, it was found that the RCR register has been inexplicably modified to an incorrect value, resulting in the nic not being able to receive authenticated frames. To fix this problem, add regrcr in rtl8xxxu_priv struct, and store the RCR value every time the register is written, and use it the next time the register need to be modified. Signed-off-by: Yun Lu <luyun@kylinos.cn> Link: https://lore.kernel.org/all/20230427020512.1221062-1-luyun_611@163.com Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230512012055.2990472-1-luyun_611@163.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 20429444e653ee8242dfbf815c0c37866beb371b ]

When using rtl8192cu with rtl8xxxu driver to connect wifi, there is a
probability of failure, which shows "authentication with ... timed out".
Through debugging, it was found that the RCR register has been inexplicably
modified to an incorrect value, resulting in the nic not being able to
receive authenticated frames.

To fix this problem, add regrcr in rtl8xxxu_priv struct, and store
the RCR value every time the register is written, and use it the next
time the register need to be modified.

Signed-off-by: Yun Lu <luyun@kylinos.cn>
Link: https://lore.kernel.org/all/20230427020512.1221062-1-luyun_611@163.com
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230512012055.2990472-1-luyun_611@163.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
net: dsa: mv88e6xxx: Increase wait after reset deactivation 2023-06-09T08:28:54+00:00 Andreas Svensson andreas.svensson@axis.com 2023-05-30T14:52:23+00:00 6c0aacf1b4e1ee6399147128bc378396e8bec4ed [ Upstream commit 3c27f3d53d588618d81d30d6712459a3cc9489b8 ] A switch held in reset by default needs to wait longer until we can reliably detect it. An issue was observed when testing on the Marvell 88E6393X (Link Street). The driver failed to detect the switch on some upstarts. Increasing the wait time after reset deactivation solves this issue. The updated wait time is now also the same as the wait time in the mv88e6xxx_hardware_reset function. Fixes: 7b75e49de424 ("net: dsa: mv88e6xxx: wait after reset deactivation") Signed-off-by: Andreas Svensson <andreas.svensson@axis.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230530145223.1223993-1-andreas.svensson@axis.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 3c27f3d53d588618d81d30d6712459a3cc9489b8 ]

A switch held in reset by default needs to wait longer until we can
reliably detect it.

An issue was observed when testing on the Marvell 88E6393X (Link Street).
The driver failed to detect the switch on some upstarts. Increasing the
wait time after reset deactivation solves this issue.

The updated wait time is now also the same as the wait time in the
mv88e6xxx_hardware_reset function.

Fixes: 7b75e49de424 ("net: dsa: mv88e6xxx: wait after reset deactivation")
Signed-off-by: Andreas Svensson <andreas.svensson@axis.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230530145223.1223993-1-andreas.svensson@axis.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ocfs2/dlm: move BITS_TO_BYTES() to bitops.h for wider use 2023-06-09T08:28:54+00:00 Andy Shevchenko andriy.shevchenko@linux.intel.com 2020-01-31T06:11:47+00:00 cec562fbf8c553595d62d9cbc5bf7ea337aed578 [ Upstream commit dd3e7cba16274831f5a69f071ed3cf13ffb352ea ] There are users already and will be more of BITS_TO_BYTES() macro. Move it to bitops.h for wider use. In the case of ocfs2 the replacement is identical. As for bnx2x, there are two places where floor version is used. In the first case to calculate the amount of structures that can fit one memory page. In this case obviously the ceiling variant is correct and original code might have a potential bug, if amount of bits % 8 is not 0. In the second case the macro is used to calculate bytes transmitted in one microsecond. This will work for all speeds which is multiply of 1Gbps without any change, for the rest new code will give ceiling value, for instance 100Mbps will give 13 bytes, while old code gives 12 bytes and the arithmetically correct one is 12.5 bytes. Further the value is used to setup timer threshold which in any case has its own margins due to certain resolution. I don't see here an issue with slightly shifting thresholds for low speed connections, the card is supposed to utilize highest available rate, which is usually 10Gbps. Link: http://lkml.kernel.org/r/20200108121316.22411-1-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Acked-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Stable-dep-of: f4e4534850a9 ("net/netlink: fix NETLINK_LIST_MEMBERSHIPS length report") Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit dd3e7cba16274831f5a69f071ed3cf13ffb352ea ]

There are users already and will be more of BITS_TO_BYTES() macro.  Move
it to bitops.h for wider use.

In the case of ocfs2 the replacement is identical.

As for bnx2x, there are two places where floor version is used.  In the
first case to calculate the amount of structures that can fit one memory
page.  In this case obviously the ceiling variant is correct and
original code might have a potential bug, if amount of bits % 8 is not
0.  In the second case the macro is used to calculate bytes transmitted
in one microsecond.  This will work for all speeds which is multiply of
1Gbps without any change, for the rest new code will give ceiling value,
for instance 100Mbps will give 13 bytes, while old code gives 12 bytes
and the arithmetically correct one is 12.5 bytes.  Further the value is
used to setup timer threshold which in any case has its own margins due
to certain resolution.  I don't see here an issue with slightly shifting
thresholds for low speed connections, the card is supposed to utilize
highest available rate, which is usually 10Gbps.

Link: http://lkml.kernel.org/r/20200108121316.22411-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Stable-dep-of: f4e4534850a9 ("net/netlink: fix NETLINK_LIST_MEMBERSHIPS length report")
Signed-off-by: Sasha Levin <sashal@kernel.org>
amd-xgbe: fix the false linkup in xgbe_phy_status 2023-06-09T08:28:53+00:00 Raju Rangoju Raju.Rangoju@amd.com 2023-05-25T18:26:12+00:00 dd3773e8c8c9960aedf539db05bcd8566e4d36b0 [ Upstream commit dc362e20cd6ab7a93d1b09669730c406f0910c35 ] In the event of a change in XGBE mode, the current auto-negotiation needs to be reset and the AN cycle needs to be re-triggerred. However, the current code ignores the return value of xgbe_set_mode(), leading to false information as the link is declared without checking the status register. Fix this by propagating the mode switch status information to xgbe_phy_status(). Fixes: e57f7a3feaef ("amd-xgbe: Prepare for working with more than one type of phy") Co-developed-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit dc362e20cd6ab7a93d1b09669730c406f0910c35 ]

In the event of a change in XGBE mode, the current auto-negotiation
needs to be reset and the AN cycle needs to be re-triggerred. However,
the current code ignores the return value of xgbe_set_mode(), leading to
false information as the link is declared without checking the status
register.

Fix this by propagating the mode switch status information to
xgbe_phy_status().

Fixes: e57f7a3feaef ("amd-xgbe: Prepare for working with more than one type of phy")
Co-developed-by: Sudheesh Mavila <sudheesh.mavila@amd.com>
Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>