<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux-stable.git/drivers/net, branch v5.19.4</title>
<subtitle>Linux kernel stable tree</subtitle>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/'/>
<entry>
<title>net: mscc: ocelot: report ndo_get_stats64 from the wraparound-resistant ocelot-&gt;stats</title>
<updated>2022-08-25T09:45:39+00:00</updated>
<author>
<name>Vladimir Oltean</name>
<email>vladimir.oltean@nxp.com</email>
</author>
<published>2022-08-16T13:53:52+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=e124bab08a51d80badd94fef78a8284fbe49799c'/>
<id>e124bab08a51d80badd94fef78a8284fbe49799c</id>
<content type='text'>
[ Upstream commit e780e3193e889fd8358b862f7cd18ec5a4901caf ]

Rather than reading the stats64 counters directly from the 32-bit
hardware, it's better to rely on the output produced by the periodic
ocelot_port_update_stats().

It would be even better to call ocelot_port_update_stats() right from
ocelot_get_stats64() to make sure we report the current values rather
than the ones from 2 seconds ago. But we need to export
ocelot_port_update_stats() from the switch lib towards the switchdev
driver for that, and future work will largely undo that.

There are more ocelot-based drivers waiting to be introduced, an example
of which is the SPI-controlled VSC7512. In that driver's case, it will
be impossible to call ocelot_port_update_stats() from ndo_get_stats64
context, since the latter is atomic, and reading the stats over SPI is
sleepable. So the compromise taken here, which will also hold going
forward, is to report 64-bit counters to stats64, which are not 100% up
to date.

Fixes: a556c76adc05 ("net: mscc: Add initial Ocelot switch support")
Signed-off-by: Vladimir Oltean &lt;vladimir.oltean@nxp.com&gt;
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit e780e3193e889fd8358b862f7cd18ec5a4901caf ]

Rather than reading the stats64 counters directly from the 32-bit
hardware, it's better to rely on the output produced by the periodic
ocelot_port_update_stats().

It would be even better to call ocelot_port_update_stats() right from
ocelot_get_stats64() to make sure we report the current values rather
than the ones from 2 seconds ago. But we need to export
ocelot_port_update_stats() from the switch lib towards the switchdev
driver for that, and future work will largely undo that.

There are more ocelot-based drivers waiting to be introduced, an example
of which is the SPI-controlled VSC7512. In that driver's case, it will
be impossible to call ocelot_port_update_stats() from ndo_get_stats64
context, since the latter is atomic, and reading the stats over SPI is
sleepable. So the compromise taken here, which will also hold going
forward, is to report 64-bit counters to stats64, which are not 100% up
to date.

Fixes: a556c76adc05 ("net: mscc: Add initial Ocelot switch support")
Signed-off-by: Vladimir Oltean &lt;vladimir.oltean@nxp.com&gt;
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>net: mscc: ocelot: make struct ocelot_stat_layout array indexable</title>
<updated>2022-08-25T09:45:39+00:00</updated>
<author>
<name>Vladimir Oltean</name>
<email>vladimir.oltean@nxp.com</email>
</author>
<published>2022-08-16T13:53:50+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=e07a74dc0fed1570a4fbf3240cfb06a93b8f904e'/>
<id>e07a74dc0fed1570a4fbf3240cfb06a93b8f904e</id>
<content type='text'>
[ Upstream commit 9190460084ddd0e9235f55eab0fdd5456b5f2fd5 ]

The ocelot counters are 32-bit and require periodic reading, every 2
seconds, by ocelot_port_update_stats(), so that wraparounds are
detected.

Currently, the counters reported by ocelot_get_stats64() come from the
32-bit hardware counters directly, rather than from the 64-bit
accumulated ocelot-&gt;stats, and this is a problem for their integrity.

The strategy is to make ocelot_get_stats64() able to cherry-pick
individual stats from ocelot-&gt;stats the way in which it currently reads
them out from SYS_COUNT_* registers. But currently it can't, because
ocelot-&gt;stats is an opaque u64 array that's used only to feed data into
ethtool -S.

To solve that problem, we need to make ocelot-&gt;stats indexable, and
associate each element with an element of struct ocelot_stat_layout used
by ethtool -S.

This makes ocelot_stat_layout a fat (and possibly sparse) array, so we
need to change the way in which we access it. We no longer need
OCELOT_STAT_END as a sentinel, because we know the array's size
(OCELOT_NUM_STATS). We just need to skip the array elements that were
left unpopulated for the switch revision (ocelot, felix, seville).

Signed-off-by: Vladimir Oltean &lt;vladimir.oltean@nxp.com&gt;
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 9190460084ddd0e9235f55eab0fdd5456b5f2fd5 ]

The ocelot counters are 32-bit and require periodic reading, every 2
seconds, by ocelot_port_update_stats(), so that wraparounds are
detected.

Currently, the counters reported by ocelot_get_stats64() come from the
32-bit hardware counters directly, rather than from the 64-bit
accumulated ocelot-&gt;stats, and this is a problem for their integrity.

The strategy is to make ocelot_get_stats64() able to cherry-pick
individual stats from ocelot-&gt;stats the way in which it currently reads
them out from SYS_COUNT_* registers. But currently it can't, because
ocelot-&gt;stats is an opaque u64 array that's used only to feed data into
ethtool -S.

To solve that problem, we need to make ocelot-&gt;stats indexable, and
associate each element with an element of struct ocelot_stat_layout used
by ethtool -S.

This makes ocelot_stat_layout a fat (and possibly sparse) array, so we
need to change the way in which we access it. We no longer need
OCELOT_STAT_END as a sentinel, because we know the array's size
(OCELOT_NUM_STATS). We just need to skip the array elements that were
left unpopulated for the switch revision (ocelot, felix, seville).

Signed-off-by: Vladimir Oltean &lt;vladimir.oltean@nxp.com&gt;
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>net: mscc: ocelot: fix race between ndo_get_stats64 and ocelot_check_stats_work</title>
<updated>2022-08-25T09:45:38+00:00</updated>
<author>
<name>Vladimir Oltean</name>
<email>vladimir.oltean@nxp.com</email>
</author>
<published>2022-08-16T13:53:49+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=3aa635bf2f8f7495135d5cba72aae6fc279df33e'/>
<id>3aa635bf2f8f7495135d5cba72aae6fc279df33e</id>
<content type='text'>
[ Upstream commit 18d8e67df184081bc6ce6220a2dd965cfd3d7e6b ]

The 2 methods can run concurrently, and one will change the window of
counters (SYS_STAT_CFG_STAT_VIEW) that the other sees. The fix is
similar to what commit 7fbf6795d127 ("net: mscc: ocelot: fix mutex lock
error during ethtool stats read") has done for ethtool -S.

Fixes: a556c76adc05 ("net: mscc: Add initial Ocelot switch support")
Signed-off-by: Vladimir Oltean &lt;vladimir.oltean@nxp.com&gt;
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 18d8e67df184081bc6ce6220a2dd965cfd3d7e6b ]

The 2 methods can run concurrently, and one will change the window of
counters (SYS_STAT_CFG_STAT_VIEW) that the other sees. The fix is
similar to what commit 7fbf6795d127 ("net: mscc: ocelot: fix mutex lock
error during ethtool stats read") has done for ethtool -S.

Fixes: a556c76adc05 ("net: mscc: Add initial Ocelot switch support")
Signed-off-by: Vladimir Oltean &lt;vladimir.oltean@nxp.com&gt;
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>net: mscc: ocelot: turn stats_lock into a spinlock</title>
<updated>2022-08-25T09:45:38+00:00</updated>
<author>
<name>Vladimir Oltean</name>
<email>vladimir.oltean@nxp.com</email>
</author>
<published>2022-08-16T13:53:48+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=0d05a558033e18e2b92f1b086bd405a5fd4494ff'/>
<id>0d05a558033e18e2b92f1b086bd405a5fd4494ff</id>
<content type='text'>
[ Upstream commit 22d842e3efe56402c33b5e6e303bb71ce9bf9334 ]

ocelot_get_stats64() currently runs unlocked and therefore may collide
with ocelot_port_update_stats() which indirectly accesses the same
counters. However, ocelot_get_stats64() runs in atomic context, and we
cannot simply take the sleepable ocelot-&gt;stats_lock mutex. We need to
convert it to an atomic spinlock first. Do that as a preparatory change.

Signed-off-by: Vladimir Oltean &lt;vladimir.oltean@nxp.com&gt;
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 22d842e3efe56402c33b5e6e303bb71ce9bf9334 ]

ocelot_get_stats64() currently runs unlocked and therefore may collide
with ocelot_port_update_stats() which indirectly accesses the same
counters. However, ocelot_get_stats64() runs in atomic context, and we
cannot simply take the sleepable ocelot-&gt;stats_lock mutex. We need to
convert it to an atomic spinlock first. Do that as a preparatory change.

Signed-off-by: Vladimir Oltean &lt;vladimir.oltean@nxp.com&gt;
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>igb: Add lock to avoid data race</title>
<updated>2022-08-25T09:45:37+00:00</updated>
<author>
<name>Lin Ma</name>
<email>linma@zju.edu.cn</email>
</author>
<published>2022-08-17T18:49:21+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=64c0c233a88591bb23569ae12eed7f74e5bd39ce'/>
<id>64c0c233a88591bb23569ae12eed7f74e5bd39ce</id>
<content type='text'>
commit 6faee3d4ee8be0f0367d0c3d826afb3571b7a5e0 upstream.

The commit c23d92b80e0b ("igb: Teardown SR-IOV before
unregister_netdev()") places the unregister_netdev() call after the
igb_disable_sriov() call to avoid functionality issue.

However, it introduces several race conditions when detaching a device.
For example, when .remove() is called, the below interleaving leads to
use-after-free.

 (FREE from device detaching)      |   (USE from netdev core)
igb_remove                         |  igb_ndo_get_vf_config
 igb_disable_sriov                 |  vf &gt;= adapter-&gt;vfs_allocated_count?
  kfree(adapter-&gt;vf_data)          |
  adapter-&gt;vfs_allocated_count = 0 |
                                   |    memcpy(... adapter-&gt;vf_data[vf]

Moreover, the igb_disable_sriov() also suffers from data race with the
requests from VF driver.

 (FREE from device detaching)      |   (USE from requests)
igb_remove                         |  igb_msix_other
 igb_disable_sriov                 |   igb_msg_task
  kfree(adapter-&gt;vf_data)          |    vf &lt; adapter-&gt;vfs_allocated_count
  adapter-&gt;vfs_allocated_count = 0 |

To this end, this commit first eliminates the data races from netdev
core by using rtnl_lock (similar to commit 719479230893 ("dpaa2-eth: add
MAC/PHY support through phylink")). And then adds a spinlock to
eliminate races from driver requests. (similar to commit 1e53834ce541
("ixgbe: Add locking to prevent panic when setting sriov_numvfs to zero")

Fixes: c23d92b80e0b ("igb: Teardown SR-IOV before unregister_netdev()")
Signed-off-by: Lin Ma &lt;linma@zju.edu.cn&gt;
Tested-by: Konrad Jankowski &lt;konrad0.jankowski@intel.com&gt;
Signed-off-by: Tony Nguyen &lt;anthony.l.nguyen@intel.com&gt;
Link: https://lore.kernel.org/r/20220817184921.735244-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 6faee3d4ee8be0f0367d0c3d826afb3571b7a5e0 upstream.

The commit c23d92b80e0b ("igb: Teardown SR-IOV before
unregister_netdev()") places the unregister_netdev() call after the
igb_disable_sriov() call to avoid functionality issue.

However, it introduces several race conditions when detaching a device.
For example, when .remove() is called, the below interleaving leads to
use-after-free.

 (FREE from device detaching)      |   (USE from netdev core)
igb_remove                         |  igb_ndo_get_vf_config
 igb_disable_sriov                 |  vf &gt;= adapter-&gt;vfs_allocated_count?
  kfree(adapter-&gt;vf_data)          |
  adapter-&gt;vfs_allocated_count = 0 |
                                   |    memcpy(... adapter-&gt;vf_data[vf]

Moreover, the igb_disable_sriov() also suffers from data race with the
requests from VF driver.

 (FREE from device detaching)      |   (USE from requests)
igb_remove                         |  igb_msix_other
 igb_disable_sriov                 |   igb_msg_task
  kfree(adapter-&gt;vf_data)          |    vf &lt; adapter-&gt;vfs_allocated_count
  adapter-&gt;vfs_allocated_count = 0 |

To this end, this commit first eliminates the data races from netdev
core by using rtnl_lock (similar to commit 719479230893 ("dpaa2-eth: add
MAC/PHY support through phylink")). And then adds a spinlock to
eliminate races from driver requests. (similar to commit 1e53834ce541
("ixgbe: Add locking to prevent panic when setting sriov_numvfs to zero")

Fixes: c23d92b80e0b ("igb: Teardown SR-IOV before unregister_netdev()")
Signed-off-by: Lin Ma &lt;linma@zju.edu.cn&gt;
Tested-by: Konrad Jankowski &lt;konrad0.jankowski@intel.com&gt;
Signed-off-by: Tony Nguyen &lt;anthony.l.nguyen@intel.com&gt;
Link: https://lore.kernel.org/r/20220817184921.735244-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>stmmac: intel: Add a missing clk_disable_unprepare() call in intel_eth_pci_remove()</title>
<updated>2022-08-25T09:45:37+00:00</updated>
<author>
<name>Christophe JAILLET</name>
<email>christophe.jaillet@wanadoo.fr</email>
</author>
<published>2022-08-16T14:23:57+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=9400aeb419d35e718e90aa14a97c11229d0a40bc'/>
<id>9400aeb419d35e718e90aa14a97c11229d0a40bc</id>
<content type='text'>
commit 5c23d6b717e4e956376f3852b90f58e262946b50 upstream.

Commit 09f012e64e4b ("stmmac: intel: Fix clock handling on error and remove
paths") removed this clk_disable_unprepare()

This was partly revert by commit ac322f86b56c ("net: stmmac: Fix clock
handling on remove path") which removed this clk_disable_unprepare()
because:
"
   While unloading the dwmac-intel driver, clk_disable_unprepare() is
   being called twice in stmmac_dvr_remove() and
   intel_eth_pci_remove(). This causes kernel panic on the second call.
"

However later on, commit 5ec55823438e8 ("net: stmmac: add clocks management
for gmac driver") has updated stmmac_dvr_remove() which do not call
clk_disable_unprepare() anymore.

So this call should now be called from intel_eth_pci_remove().

Fixes: 5ec55823438e8 ("net: stmmac: add clocks management for gmac driver")
Signed-off-by: Christophe JAILLET &lt;christophe.jaillet@wanadoo.fr&gt;
Reviewed-by: Andy Shevchenko &lt;andriy.shevchenko@linux.intel.com&gt;
Link: https://lore.kernel.org/r/d7c8c1dadf40df3a7c9e643f76ffadd0ccc1ad1b.1660659689.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 5c23d6b717e4e956376f3852b90f58e262946b50 upstream.

Commit 09f012e64e4b ("stmmac: intel: Fix clock handling on error and remove
paths") removed this clk_disable_unprepare()

This was partly revert by commit ac322f86b56c ("net: stmmac: Fix clock
handling on remove path") which removed this clk_disable_unprepare()
because:
"
   While unloading the dwmac-intel driver, clk_disable_unprepare() is
   being called twice in stmmac_dvr_remove() and
   intel_eth_pci_remove(). This causes kernel panic on the second call.
"

However later on, commit 5ec55823438e8 ("net: stmmac: add clocks management
for gmac driver") has updated stmmac_dvr_remove() which do not call
clk_disable_unprepare() anymore.

So this call should now be called from intel_eth_pci_remove().

Fixes: 5ec55823438e8 ("net: stmmac: add clocks management for gmac driver")
Signed-off-by: Christophe JAILLET &lt;christophe.jaillet@wanadoo.fr&gt;
Reviewed-by: Andy Shevchenko &lt;andriy.shevchenko@linux.intel.com&gt;
Link: https://lore.kernel.org/r/d7c8c1dadf40df3a7c9e643f76ffadd0ccc1ad1b.1660659689.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>fec: Fix timer capture timing in `fec_ptp_enable_pps()`</title>
<updated>2022-08-25T09:45:36+00:00</updated>
<author>
<name>Csókás Bence</name>
<email>csokas.bence@prolan.hu</email>
</author>
<published>2022-08-11T10:13:49+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=330eccd73fc0adae76f3cd59b9e2692e36061802'/>
<id>330eccd73fc0adae76f3cd59b9e2692e36061802</id>
<content type='text'>
commit 61d5e2a251fb20c2c5e998c3f1d52ed6d5360319 upstream.

Code reimplements functionality already in `fec_ptp_read()`,
but misses check for FEC_QUIRK_BUG_CAPTURE. Replace with function call.

Fixes: 28b5f058cf1d ("net: fec: ptp: fix convergence issue to support LinuxPTP stack")
Signed-off-by: Csókás Bence &lt;csokas.bence@prolan.hu&gt;
Link: https://lore.kernel.org/r/20220811101348.13755-1-csokas.bence@prolan.hu
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 61d5e2a251fb20c2c5e998c3f1d52ed6d5360319 upstream.

Code reimplements functionality already in `fec_ptp_read()`,
but misses check for FEC_QUIRK_BUG_CAPTURE. Replace with function call.

Fixes: 28b5f058cf1d ("net: fec: ptp: fix convergence issue to support LinuxPTP stack")
Signed-off-by: Csókás Bence &lt;csokas.bence@prolan.hu&gt;
Link: https://lore.kernel.org/r/20220811101348.13755-1-csokas.bence@prolan.hu
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>i40e: Fix to stop tx_timeout recovery if GLOBR fails</title>
<updated>2022-08-25T09:45:36+00:00</updated>
<author>
<name>Alan Brady</name>
<email>alan.brady@intel.com</email>
</author>
<published>2022-08-02T08:19:17+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=7c9ebb648cdecd24774e019d083dc5892476163a'/>
<id>7c9ebb648cdecd24774e019d083dc5892476163a</id>
<content type='text'>
commit 57c942bc3bef0970f0b21f8e0998e76a900ea80d upstream.

When a tx_timeout fires, the PF attempts to recover by incrementally
resetting.  First we try a PFR, then CORER and finally a GLOBR.  If the
GLOBR fails, then we keep hitting the tx_timeout and incrementing the
recovery level and issuing dmesgs, which is both annoying to the user
and accomplishes nothing.

If the GLOBR fails, then we're pretty much totally hosed, and there's
not much else we can do to recover, so this makes it such that we just
kill the VSI and stop hitting the tx_timeout in such a case.

Fixes: 41c445ff0f48 ("i40e: main driver core")
Signed-off-by: Alan Brady &lt;alan.brady@intel.com&gt;
Signed-off-by: Mateusz Palczewski &lt;mateusz.palczewski@intel.com&gt;
Tested-by: Gurucharan &lt;gurucharanx.g@intel.com&gt; (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen &lt;anthony.l.nguyen@intel.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 57c942bc3bef0970f0b21f8e0998e76a900ea80d upstream.

When a tx_timeout fires, the PF attempts to recover by incrementally
resetting.  First we try a PFR, then CORER and finally a GLOBR.  If the
GLOBR fails, then we keep hitting the tx_timeout and incrementing the
recovery level and issuing dmesgs, which is both annoying to the user
and accomplishes nothing.

If the GLOBR fails, then we're pretty much totally hosed, and there's
not much else we can do to recover, so this makes it such that we just
kill the VSI and stop hitting the tx_timeout in such a case.

Fixes: 41c445ff0f48 ("i40e: main driver core")
Signed-off-by: Alan Brady &lt;alan.brady@intel.com&gt;
Signed-off-by: Mateusz Palczewski &lt;mateusz.palczewski@intel.com&gt;
Tested-by: Gurucharan &lt;gurucharanx.g@intel.com&gt; (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen &lt;anthony.l.nguyen@intel.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>i40e: Fix tunnel checksum offload with fragmented traffic</title>
<updated>2022-08-25T09:45:36+00:00</updated>
<author>
<name>Przemyslaw Patynowski</name>
<email>przemyslawx.patynowski@intel.com</email>
</author>
<published>2022-07-27T09:19:40+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=15ccc6fa8153ff1ea9b44de0c7433fd82b0e5595'/>
<id>15ccc6fa8153ff1ea9b44de0c7433fd82b0e5595</id>
<content type='text'>
commit 2c6482091f01ba104cf8ee549aa5c717e80d43ea upstream.

Fix checksum offload on VXLAN tunnels.
In case, when mpls protocol is not used, set l4 header to transport
header of skb. This fixes case, when user tries to offload checksums
of VXLAN tunneled traffic.

Steps for reproduction (requires link partner with tunnels):
ip l s enp130s0f0 up
ip a f enp130s0f0
ip a a 10.10.110.2/24 dev enp130s0f0
ip l s enp130s0f0 mtu 1600
ip link add vxlan12_sut type vxlan id 12 group 238.168.100.100 dev \
enp130s0f0 dstport 4789
ip l s vxlan12_sut up
ip a a 20.10.110.2/24 dev vxlan12_sut
iperf3 -c 20.10.110.1 #should connect

Without this patch, TX descriptor was using wrong data, due to
l4 header pointing wrong address. NIC would then drop those packets
internally, due to incorrect TX descriptor data, which increased
GLV_TEPC register.

Fixes: b4fb2d33514a ("i40e: Add support for MPLS + TSO")
Signed-off-by: Przemyslaw Patynowski &lt;przemyslawx.patynowski@intel.com&gt;
Signed-off-by: Mateusz Palczewski &lt;mateusz.palczewski@intel.com&gt;
Tested-by: Marek Szlosek &lt;marek.szlosek@intel.com&gt;
Signed-off-by: Tony Nguyen &lt;anthony.l.nguyen@intel.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 2c6482091f01ba104cf8ee549aa5c717e80d43ea upstream.

Fix checksum offload on VXLAN tunnels.
In case, when mpls protocol is not used, set l4 header to transport
header of skb. This fixes case, when user tries to offload checksums
of VXLAN tunneled traffic.

Steps for reproduction (requires link partner with tunnels):
ip l s enp130s0f0 up
ip a f enp130s0f0
ip a a 10.10.110.2/24 dev enp130s0f0
ip l s enp130s0f0 mtu 1600
ip link add vxlan12_sut type vxlan id 12 group 238.168.100.100 dev \
enp130s0f0 dstport 4789
ip l s vxlan12_sut up
ip a a 20.10.110.2/24 dev vxlan12_sut
iperf3 -c 20.10.110.1 #should connect

Without this patch, TX descriptor was using wrong data, due to
l4 header pointing wrong address. NIC would then drop those packets
internally, due to incorrect TX descriptor data, which increased
GLV_TEPC register.

Fixes: b4fb2d33514a ("i40e: Add support for MPLS + TSO")
Signed-off-by: Przemyslaw Patynowski &lt;przemyslawx.patynowski@intel.com&gt;
Signed-off-by: Mateusz Palczewski &lt;mateusz.palczewski@intel.com&gt;
Tested-by: Marek Szlosek &lt;marek.szlosek@intel.com&gt;
Signed-off-by: Tony Nguyen &lt;anthony.l.nguyen@intel.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ice: Ignore error message when setting same promiscuous mode</title>
<updated>2022-08-25T09:45:35+00:00</updated>
<author>
<name>Benjamin Mikailenko</name>
<email>benjamin.mikailenko@intel.com</email>
</author>
<published>2022-08-12T13:25:50+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=0e933ded5079a3b366593492689bcf28c1fdcf1d'/>
<id>0e933ded5079a3b366593492689bcf28c1fdcf1d</id>
<content type='text'>
commit 79956b83ed4281c35561c39254558092d96a9ed1 upstream.

Commit 1273f89578f2 ("ice: Fix broken IFF_ALLMULTI handling")
introduced new checks when setting/clearing promiscuous mode. But if the
requested promiscuous mode setting already exists, an -EEXIST error
message would be printed. This is incorrect because promiscuous mode is
either on/off and shouldn't print an error when the requested
configuration is already set.

This can happen when removing a bridge with two bonded interfaces and
promiscuous most isn't fully cleared from VLAN VSI in hardware.

Fix this by ignoring cases where requested promiscuous mode exists.

Fixes: 1273f89578f2 ("ice: Fix broken IFF_ALLMULTI handling")
Signed-off-by: Benjamin Mikailenko &lt;benjamin.mikailenko@intel.com&gt;
Signed-off-by: Grzegorz Siwik &lt;grzegorz.siwik@intel.com&gt;
Link: https://lore.kernel.org/all/CAK8fFZ7m-KR57M_rYX6xZN39K89O=LGooYkKsu6HKt0Bs+x6xQ@mail.gmail.com/
Tested-by: Gurucharan &lt;gurucharanx.g@intel.com&gt; (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen &lt;anthony.l.nguyen@intel.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 79956b83ed4281c35561c39254558092d96a9ed1 upstream.

Commit 1273f89578f2 ("ice: Fix broken IFF_ALLMULTI handling")
introduced new checks when setting/clearing promiscuous mode. But if the
requested promiscuous mode setting already exists, an -EEXIST error
message would be printed. This is incorrect because promiscuous mode is
either on/off and shouldn't print an error when the requested
configuration is already set.

This can happen when removing a bridge with two bonded interfaces and
promiscuous most isn't fully cleared from VLAN VSI in hardware.

Fix this by ignoring cases where requested promiscuous mode exists.

Fixes: 1273f89578f2 ("ice: Fix broken IFF_ALLMULTI handling")
Signed-off-by: Benjamin Mikailenko &lt;benjamin.mikailenko@intel.com&gt;
Signed-off-by: Grzegorz Siwik &lt;grzegorz.siwik@intel.com&gt;
Link: https://lore.kernel.org/all/CAK8fFZ7m-KR57M_rYX6xZN39K89O=LGooYkKsu6HKt0Bs+x6xQ@mail.gmail.com/
Tested-by: Gurucharan &lt;gurucharanx.g@intel.com&gt; (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen &lt;anthony.l.nguyen@intel.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
</feed>
