commit 7e2fb8bc7ef6c7a63ca95751b90162dece0b3f4c upstream. Use the new ip_tunnel_key field with the flow flags in the IPv4 route lookups for the encapsulated packet. This will be used by the bpf_skb_set_tunnel_key helper in a subsequent commit. Signed-off-by: Paul Chaignon <paul@isovalent.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/1ffc95c3d60182fd5ec0cf6602083f8f68afe98f.1658759380.git.paul@isovalent.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 861396ac0b47780210b72c4fea359540965a4970 upstream. Use the new ip_tunnel_key field with the flow flags in the IPv4 route lookups for the encapsulated packet. This will be used by the bpf_skb_set_tunnel_key helper in the subsequent commit. Signed-off-by: Paul Chaignon <paul@isovalent.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/fcc2e0eea01e8ea465a180126366ec20596ba530.1658759380.git.paul@isovalent.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7e4babffa6f340a74c820d44d44d16511e666424 upstream.
min_gate_len[tc] is supposed to track the shortest interval of
continuously open gates for a traffic class. For example, in the
following case:
TC 76543210
t0 00000001b 200000 ns
t1 00000010b 200000 ns
min_gate_len[0] and min_gate_len[1] should be 200000, while
min_gate_len[2-7] should be 0.
However what happens is that min_gate_len[0] is 200000, but
min_gate_len[1] ends up being 0 (despite gate_len[1] being 200000 at the
point where the logic detects the gate close event for TC 1).
The problem is that the code considers a "gate close" event whenever it
sees that there is a 0 for that TC (essentially it's level rather than
edge triggered). By doing that, any time a gate is seen as closed
without having been open prior, gate_len, which is 0, will be written
into min_gate_len. Once min_gate_len becomes 0, it's impossible for it
to track anything higher than that (the length of actually open
intervals).
To fix this, we make the writing to min_gate_len[tc] be edge-triggered,
which avoids writes for gates that are closed in consecutive intervals.
However what this does is it makes us need to special-case the
permanently closed gates at the end.
Fixes: 55a515b1f5a9 ("net: dsa: felix: drop oversized frames with tc-taprio instead of hanging the port")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220804202817.1677572-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 38a523a2946d3a0961d141d477a1ee2b1f3bdbb1 upstream. This reverts commit 77515ebaf01920e2db49e04672ef669a7c2907f2 as it causes build problems in linux-next. It needs to be reintroduced in a way that can allow the api to evolve and not require a "flag day" to catch all users. Link: https://lore.kernel.org/r/20220623160723.7a44b573@canb.auug.org.au Cc: Duoming Zhou <duoming@zju.edu.cn> Cc: Brian Norris <briannorris@chromium.org> Cc: Johannes Berg <johannes@sipsolutions.net> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5f8954e099b8ae96e7de1bb95950e00c85bedd40 upstream. This reverts commit a52ed4866d2b90dd5e4ae9dabd453f3ed8fa3cbc as it causes build problems in linux-next. It needs to be reintroduced in a way that can allow the api to evolve and not require a "flag day" to catch all users. Link: https://lore.kernel.org/r/20220623160723.7a44b573@canb.auug.org.au Cc: Duoming Zhou <duoming@zju.edu.cn> Cc: Brian Norris <briannorris@chromium.org> Cc: Johannes Berg <johannes@sipsolutions.net> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2f7ee2a72ccec8b85a05c4644d7ec9f40c1c50c8 ]
Kbuild spotted the following bug during the testing of one of
the optimizations:
In file included from include/linux/cpumask.h:12,
[...]
from drivers/net/ethernet/intel/ice/ice_switch.c:4:
drivers/net/ethernet/intel/ice/ice_switch.c: In function 'ice_find_free_recp_res_idx.constprop':
include/linux/bitmap.h:447:22: warning: 'possible_idx[0]' is used uninitialized [-Wuninitialized]
447 | *map |= GENMASK(start + nbits - 1, start);
| ^~
In file included from drivers/net/ethernet/intel/ice/ice.h:7,
from drivers/net/ethernet/intel/ice/ice_lib.h:7,
from drivers/net/ethernet/intel/ice/ice_switch.c:4:
drivers/net/ethernet/intel/ice/ice_switch.c:4929:24: note: 'possible_idx[0]' was declared here
4929 | DECLARE_BITMAP(possible_idx, ICE_MAX_FV_WORDS);
| ^~~~~~~~~~~~
include/linux/types.h:11:23: note: in definition of macro 'DECLARE_BITMAP'
11 | unsigned long name[BITS_TO_LONGS(bits)]
| ^~~~
%ICE_MAX_FV_WORDS is 48, so bitmap_set() here was initializing only
48 bits, leaving a junk in the rest 16.
It was previously hidden due to that filling 48 bits makes
bitmap_set() call external __bitmap_set(), but after making it use
plain bit arithmetics on small bitmaps, compilers started seeing
the issue. It was still working because those 16 weren't used
anywhere anyhow.
bitmap_{clear,set}() are not really intended to initialize bitmaps,
rather to modify already initialized ones, as they don't do anything
past the passed number of bits. The correct function to do this in
that particular case is bitmap_fill(), so use it here. It will do
`*possible_idx = ~0UL` instead of `*possible_idx |= GENMASK(47, 0)`,
not leaving anything in an undefined state.
Fixes: fd2a6b71e300 ("ice: create advanced switch recipe")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a52ed4866d2b90dd5e4ae9dabd453f3ed8fa3cbc ]
There are sleep in atomic context bugs when uploading device dump
data in mwifiex. The root cause is that dev_coredumpv could not
be used in atomic contexts, because it calls dev_set_name which
include operations that may sleep. The call tree shows execution
paths that could lead to bugs:
(Interrupt context)
fw_dump_timer_fn
mwifiex_upload_device_dump
dev_coredumpv(..., GFP_KERNEL)
dev_coredumpm()
kzalloc(sizeof(*devcd), gfp); //may sleep
dev_set_name
kobject_set_name_vargs
kvasprintf_const(GFP_KERNEL, ...); //may sleep
kstrdup(s, GFP_KERNEL); //may sleep
The corresponding fail log is shown below:
[ 135.275938] usb 1-1: == mwifiex dump information to /sys/class/devcoredump start
[ 135.281029] BUG: sleeping function called from invalid context at include/linux/sched/mm.h:265
...
[ 135.293613] Call Trace:
[ 135.293613] <IRQ>
[ 135.293613] dump_stack_lvl+0x57/0x7d
[ 135.293613] __might_resched.cold+0x138/0x173
[ 135.293613] ? dev_coredumpm+0xca/0x2e0
[ 135.293613] kmem_cache_alloc_trace+0x189/0x1f0
[ 135.293613] ? devcd_match_failing+0x30/0x30
[ 135.293613] dev_coredumpm+0xca/0x2e0
[ 135.293613] ? devcd_freev+0x10/0x10
[ 135.293613] dev_coredumpv+0x1c/0x20
[ 135.293613] ? devcd_match_failing+0x30/0x30
[ 135.293613] mwifiex_upload_device_dump+0x65/0xb0
[ 135.293613] ? mwifiex_dnld_fw+0x1b0/0x1b0
[ 135.293613] call_timer_fn+0x122/0x3d0
[ 135.293613] ? msleep_interruptible+0xb0/0xb0
[ 135.293613] ? lock_downgrade+0x3c0/0x3c0
[ 135.293613] ? __next_timer_interrupt+0x13c/0x160
[ 135.293613] ? lockdep_hardirqs_on_prepare+0xe/0x220
[ 135.293613] ? mwifiex_dnld_fw+0x1b0/0x1b0
[ 135.293613] __run_timers.part.0+0x3f8/0x540
[ 135.293613] ? call_timer_fn+0x3d0/0x3d0
[ 135.293613] ? arch_restore_msi_irqs+0x10/0x10
[ 135.293613] ? lapic_next_event+0x31/0x40
[ 135.293613] run_timer_softirq+0x4f/0xb0
[ 135.293613] __do_softirq+0x1c2/0x651
...
[ 135.293613] RIP: 0010:default_idle+0xb/0x10
[ 135.293613] RSP: 0018:ffff888006317e68 EFLAGS: 00000246
[ 135.293613] RAX: ffffffff82ad8d10 RBX: ffff888006301cc0 RCX: ffffffff82ac90e1
[ 135.293613] RDX: ffffed100d9ff1b4 RSI: ffffffff831ad140 RDI: ffffffff82ad8f20
[ 135.293613] RBP: 0000000000000003 R08: 0000000000000000 R09: ffff88806cff8d9b
[ 135.293613] R10: ffffed100d9ff1b3 R11: 0000000000000001 R12: ffffffff84593410
[ 135.293613] R13: 0000000000000000 R14: 0000000000000000 R15: 1ffff11000c62fd2
...
[ 135.389205] usb 1-1: == mwifiex dump information to /sys/class/devcoredump end
This patch uses delayed work to replace timer and moves the operations
that may sleep into a delayed work in order to mitigate bugs, it was
tested on Marvell 88W8801 chip whose port is usb and the firmware is
usb8801_uapsta.bin. The following is the result after using delayed
work to replace timer.
[ 134.936453] usb 1-1: == mwifiex dump information to /sys/class/devcoredump start
[ 135.043344] usb 1-1: == mwifiex dump information to /sys/class/devcoredump end
As we can see, there is no bug now.
Fixes: f5ecd02a8b20 ("mwifiex: device dump support for usb interface")
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/b63b77fc84ed3e8a6bef02378e17c7c71a0bc3be.1654569290.git.duoming@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 77515ebaf01920e2db49e04672ef669a7c2907f2 ]
The dev_coredumpv() and dev_coredumpm() could not be used in atomic
context, because they call kvasprintf_const() and kstrdup() with
GFP_KERNEL parameter. The process is shown below:
dev_coredumpv(.., gfp_t gfp)
dev_coredumpm(.., gfp_t gfp)
dev_set_name
kobject_set_name_vargs
kvasprintf_const(GFP_KERNEL, ...); //may sleep
kstrdup(s, GFP_KERNEL); //may sleep
This patch removes gfp_t parameter of dev_coredumpv() and dev_coredumpm()
and changes the gfp_t parameter of kzalloc() in dev_coredumpm() to
GFP_KERNEL in order to show they could not be used in atomic context.
Fixes: 833c95456a70 ("device coredump: add new device coredump class")
Reviewed-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/df72af3b1862bac7d8e793d1f3931857d3779dfd.1654569290.git.duoming@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c31b14d86dfe7174361e8c6e5df6c2c3a4d5918c ]
In case push_rcu() and related functions are buggy, there's a
WARN_ON(len >= 128), which the selftest tries to hit by being tricky. In
case it is hit, we shouldn't corrupt the kernel's stack, though;
otherwise it may be hard to even receive the report that it's buggy. So
conditionalize the stack write based on that WARN_ON()'s return value.
Note that this never *actually* happens anyway. The WARN_ON() in the
first place is bounded by IS_ENABLED(DEBUG), and isn't expected to ever
actually hit. This is just a debugging sanity check.
Additionally, hoist the constant 128 into a named enum,
MAX_ALLOWEDIPS_BITS, so that it's clear why this value is chosen.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/all/CAHk-=wjJZGA6w_DxA+k7Ejbqsq+uGK==koPai3sqdsfJqemvag@mail.gmail.com/
Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 151c8e499f4705010780189377f85b57400ccbf5 ]
Using msleep() is problematic because it's compared against
ratelimiter.c's ktime_get_coarse_boottime_ns(), which means on systems
with slow jiffies (such as UML's forced HZ=100), the result is
inaccurate. So switch to using schedule_hrtimeout().
However, hrtimer gives us access only to the traditional posix timers,
and none of the _COARSE variants. So now, rather than being too
imprecise like jiffies, it's too precise.
One solution would be to give it a large "range" value, but this will
still fire early on a loaded system. A better solution is to align the
timeout to the actual coarse timer, and then round up to the nearest
tick, plus change.
So add the timeout to the current coarse time, and then
schedule_hrtimer() until the absolute computed time.
This should hopefully reduce flakes in CI as well. Note that we keep the
retry loop in case the entire function is running behind, because the
test could still be scheduled out, by either the kernel or by the
hypervisor's kernel, in which case restarting the test and hoping to not
be scheduled out still helps.
Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>