linux-stable.git/drivers/net, branch v5.17.7 Linux kernel stable tree smsc911x: allow using IRQ0 2022-05-12T10:32:39+00:00 Sergey Shtylyov s.shtylyov@omp.ru 2022-05-02T20:14:09+00:00 93dbbc1b275d63706e4c0b6338fedf7c19d1d047 commit 5ef9b803a4af0f5e42012176889b40bb2a978b18 upstream. The AlphaProject AP-SH4A-3A/AP-SH4AD-0A SH boards use IRQ0 for their SMSC LAN911x Ethernet chip, so the networking on them must have been broken by commit 965b2aa78fbc ("net/smsc911x: fix irq resource allocation failure") which filtered out 0 as well as the negative error codes -- it was kinda correct at the time, as platform_get_irq() could return 0 on of_irq_get() failure and on the actual 0 in an IRQ resource. This issue was fixed by me (back in 2016!), so we should be able to fix this driver to allow IRQ0 usage again... When merging this to the stable kernels, make sure you also merge commit e330b9a6bb35 ("platform: don't return 0 from platform_get_irq[_byname]() on error") -- that's my fix to platform_get_irq() for the DT platforms... Fixes: 965b2aa78fbc ("net/smsc911x: fix irq resource allocation failure") Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Link: https://lore.kernel.org/r/656036e4-6387-38df-b8a7-6ba683b16e63@omp.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 5ef9b803a4af0f5e42012176889b40bb2a978b18 upstream.

The AlphaProject AP-SH4A-3A/AP-SH4AD-0A SH boards use IRQ0 for their SMSC
LAN911x Ethernet chip, so the networking on them must have been broken by
commit 965b2aa78fbc ("net/smsc911x: fix irq resource allocation failure")
which filtered out 0 as well as the negative error codes -- it was kinda
correct at the time, as platform_get_irq() could return 0 on of_irq_get()
failure and on the actual 0 in an IRQ resource.  This issue was fixed by
me (back in 2016!), so we should be able to fix this driver to allow IRQ0
usage again...

When merging this to the stable kernels, make sure you also merge commit
e330b9a6bb35 ("platform: don't return 0 from platform_get_irq[_byname]()
on error") -- that's my fix to platform_get_irq() for the DT platforms...

Fixes: 965b2aa78fbc ("net/smsc911x: fix irq resource allocation failure")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/656036e4-6387-38df-b8a7-6ba683b16e63@omp.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
bnxt_en: Fix unnecessary dropping of RX packets 2022-05-12T10:32:38+00:00 Michael Chan michael.chan@broadcom.com 2022-05-03T01:13:12+00:00 fa57517ff79fd23e198e9ae55602cda86c68d0ed commit 195af57914d15229186658ed26dab24b9ada4122 upstream. In bnxt_poll_p5(), we first check cpr->has_more_work. If it is true, we are in NAPI polling mode and we will call __bnxt_poll_cqs() to continue polling. It is possible to exhanust the budget again when __bnxt_poll_cqs() returns. We then enter the main while loop to check for new entries in the NQ. If we had previously exhausted the NAPI budget, we may call __bnxt_poll_work() to process an RX entry with zero budget. This will cause packets to be dropped unnecessarily, thinking that we are in the netpoll path. Fix it by breaking out of the while loop if we need to process an RX NQ entry with no budget left. We will then exit NAPI and stay in polling mode. Fixes: 389a877a3b20 ("bnxt_en: Process the NQ under NAPI continuous polling.") Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 195af57914d15229186658ed26dab24b9ada4122 upstream.

In bnxt_poll_p5(), we first check cpr->has_more_work.  If it is true,
we are in NAPI polling mode and we will call __bnxt_poll_cqs() to
continue polling.  It is possible to exhanust the budget again when
__bnxt_poll_cqs() returns.

We then enter the main while loop to check for new entries in the NQ.
If we had previously exhausted the NAPI budget, we may call
__bnxt_poll_work() to process an RX entry with zero budget.  This will
cause packets to be dropped unnecessarily, thinking that we are in the
netpoll path.  Fix it by breaking out of the while loop if we need
to process an RX NQ entry with no budget left.  We will then exit
NAPI and stay in polling mode.

Fixes: 389a877a3b20 ("bnxt_en: Process the NQ under NAPI continuous polling.")
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
bnxt_en: Fix possible bnxt_open() failure caused by wrong RFS flag 2022-05-12T10:32:38+00:00 Somnath Kotur somnath.kotur@broadcom.com 2022-05-03T01:13:10+00:00 c2042683d30d147924ca8a287970e7e259665ff8 commit 13ba794397e45e52893cfc21d7a69cb5f341b407 upstream. bnxt_open() can fail in this code path, especially on a VF when it fails to reserve default rings: bnxt_open() __bnxt_open_nic() bnxt_clear_int_mode() bnxt_init_dflt_ring_mode() RX rings would be set to 0 when we hit this error path. It is possible for a subsequent bnxt_open() call to potentially succeed with a code path like this: bnxt_open() bnxt_hwrm_if_change() bnxt_fw_init_one() bnxt_fw_init_one_p3() bnxt_set_dflt_rfs() bnxt_rfs_capable() bnxt_hwrm_reserve_rings() On older chips, RFS is capable if we can reserve the number of vnics that is equal to RX rings + 1. But since RX rings is still set to 0 in this code path, we may mistakenly think that RFS is supported for 0 RX rings. Later, when the default RX rings are reserved and we try to enable RFS, it would fail and cause bnxt_open() to fail unnecessarily. We fix this in 2 places. bnxt_rfs_capable() will always return false if RX rings is not yet set. bnxt_init_dflt_ring_mode() will call bnxt_set_dflt_rfs() which will always clear the RFS flags if RFS is not supported. Fixes: 20d7d1c5c9b1 ("bnxt_en: reliably allocate IRQ table on reset to avoid crash") Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 13ba794397e45e52893cfc21d7a69cb5f341b407 upstream.

bnxt_open() can fail in this code path, especially on a VF when
it fails to reserve default rings:

bnxt_open()
  __bnxt_open_nic()
    bnxt_clear_int_mode()
    bnxt_init_dflt_ring_mode()

RX rings would be set to 0 when we hit this error path.

It is possible for a subsequent bnxt_open() call to potentially succeed
with a code path like this:

bnxt_open()
  bnxt_hwrm_if_change()
    bnxt_fw_init_one()
      bnxt_fw_init_one_p3()
        bnxt_set_dflt_rfs()
          bnxt_rfs_capable()
            bnxt_hwrm_reserve_rings()

On older chips, RFS is capable if we can reserve the number of vnics that
is equal to RX rings + 1.  But since RX rings is still set to 0 in this
code path, we may mistakenly think that RFS is supported for 0 RX rings.

Later, when the default RX rings are reserved and we try to enable
RFS, it would fail and cause bnxt_open() to fail unnecessarily.

We fix this in 2 places.  bnxt_rfs_capable() will always return false if
RX rings is not yet set.  bnxt_init_dflt_ring_mode() will call
bnxt_set_dflt_rfs() which will always clear the RFS flags if RFS is not
supported.

Fixes: 20d7d1c5c9b1 ("bnxt_en: reliably allocate IRQ table on reset to avoid crash")
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
hinic: fix bug of wq out of bound access 2022-05-12T10:32:37+00:00 Qiao Ma mqaio@linux.alibaba.com 2022-04-28T12:30:16+00:00 4fd6c1d43ffa7b92d4b1d3266159119443ccdbc3 commit 52b2abef450a78e25d485ac61e32f4ce86a87701 upstream. If wq has only one page, we need to check wqe rolling over page by compare end_idx and curr_idx, and then copy wqe to shadow wqe to avoid out of bound access. This work has been done in hinic_get_wqe, but missed for hinic_read_wqe. This patch fixes it, and removes unnecessary MASKED_WQE_IDX(). Fixes: 7dd29ee12865 ("hinic: add sriov feature support") Signed-off-by: Qiao Ma <mqaio@linux.alibaba.com> Reviewed-by: Xunlei Pang <xlpang@linux.alibaba.com> Link: https://lore.kernel.org/r/282817b0e1ae2e28fdf3ed8271a04e77f57bf42e.1651148587.git.mqaio@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 52b2abef450a78e25d485ac61e32f4ce86a87701 upstream.

If wq has only one page, we need to check wqe rolling over page by
compare end_idx and curr_idx, and then copy wqe to shadow wqe to
avoid out of bound access.
This work has been done in hinic_get_wqe, but missed for hinic_read_wqe.
This patch fixes it, and removes unnecessary MASKED_WQE_IDX().

Fixes: 7dd29ee12865 ("hinic: add sriov feature support")
Signed-off-by: Qiao Ma <mqaio@linux.alibaba.com>
Reviewed-by: Xunlei Pang <xlpang@linux.alibaba.com>
Link: https://lore.kernel.org/r/282817b0e1ae2e28fdf3ed8271a04e77f57bf42e.1651148587.git.mqaio@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
net: emaclite: Add error handling for of_address_to_resource() 2022-05-12T10:32:36+00:00 Shravya Kumbham shravya.kumbham@xilinx.com 2022-05-02T07:27:50+00:00 8bf809ca1cc9c357587dcb523db287a25014ea2a commit 7a6bc33ab54923d325d9a1747ec9652c4361ebd1 upstream. check the return value of of_address_to_resource() and also add missing of_node_put() for np and npp nodes. Fixes: e0a3bc65448c ("net: emaclite: Support multiple phys connected to one MDIO bus") Addresses-Coverity: Event check_return value. Signed-off-by: Shravya Kumbham <shravya.kumbham@xilinx.com> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 7a6bc33ab54923d325d9a1747ec9652c4361ebd1 upstream.

check the return value of of_address_to_resource() and also add
missing of_node_put() for np and npp nodes.

Fixes: e0a3bc65448c ("net: emaclite: Support multiple phys connected to one MDIO bus")
Addresses-Coverity: Event check_return value.
Signed-off-by: Shravya Kumbham <shravya.kumbham@xilinx.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
net: cpsw: add missing of_node_put() in cpsw_probe_dt() 2022-05-12T10:32:35+00:00 Yang Yingliang yangyingliang@huawei.com 2022-04-29T01:53:37+00:00 c3384b13a539fc2c92f21f155b5e1bc6f44eb05e commit 95098d5ac2551769807031444e55a0da5d4f0952 upstream. 'tmp_node' need be put before returning from cpsw_probe_dt(), so add missing of_node_put() in error path. Fixes: ed3525eda4c4 ("net: ethernet: ti: introduce cpsw switchdev based driver part 1 - dual-emac") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 95098d5ac2551769807031444e55a0da5d4f0952 upstream.

'tmp_node' need be put before returning from cpsw_probe_dt(),
so add missing of_node_put() in error path.

Fixes: ed3525eda4c4 ("net: ethernet: ti: introduce cpsw switchdev based driver part 1 - dual-emac")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
net: mdio: Fix ENOMEM return value in BCM6368 mux bus controller 2022-05-12T10:32:35+00:00 Niels Dossche dossche.niels@gmail.com 2022-04-28T21:19:32+00:00 ce0c48dc12241a9473a73d0ccb8ea5da19b1365e commit e87f66b38e66dffdec9daa9f8f0eb044e9a62e3b upstream. Error values inside the probe function must be < 0. The ENOMEM return value has the wrong sign: it is positive instead of negative. Add a minus sign. Fixes: e239756717b5 ("net: mdio: Add BCM6368 MDIO mux bus controller") Signed-off-by: Niels Dossche <dossche.niels@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220428211931.8130-1-dossche.niels@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit e87f66b38e66dffdec9daa9f8f0eb044e9a62e3b upstream.

Error values inside the probe function must be < 0. The ENOMEM return
value has the wrong sign: it is positive instead of negative.
Add a minus sign.

Fixes: e239756717b5 ("net: mdio: Add BCM6368 MDIO mux bus controller")
Signed-off-by: Niels Dossche <dossche.niels@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220428211931.8130-1-dossche.niels@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
net: stmmac: dwmac-sun8i: add missing of_node_put() in sun8i_dwmac_register_mdio_mux() 2022-05-12T10:32:35+00:00 Yang Yingliang yangyingliang@huawei.com 2022-04-28T09:57:16+00:00 935a1bbf5f47f10fc5d6e4bfa018c5653fa62639 commit 1a15267b7be77e0792cf0c7b36ca65c8eb2df0d8 upstream. The node pointer returned by of_get_child_by_name() with refcount incremented, so add of_node_put() after using it. Fixes: 634db83b8265 ("net: stmmac: dwmac-sun8i: Handle integrated/external MDIOs") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20220428095716.540452-1-yangyingliang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 1a15267b7be77e0792cf0c7b36ca65c8eb2df0d8 upstream.

The node pointer returned by of_get_child_by_name() with refcount incremented,
so add of_node_put() after using it.

Fixes: 634db83b8265 ("net: stmmac: dwmac-sun8i: Handle integrated/external MDIOs")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220428095716.540452-1-yangyingliang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
net: dsa: mt7530: add missing of_node_put() in mt7530_setup() 2022-05-12T10:32:34+00:00 Yang Yingliang yangyingliang@huawei.com 2022-04-28T09:53:17+00:00 3c68abe661e5bee86cfe8002e91925ca9eb4deb3 commit a9e9b091a1c14ecd8bd9d3214a62142a1786fe30 upstream. Add of_node_put() if of_get_phy_mode() fails in mt7530_setup() Fixes: 0c65b2b90d13 ("net: of_get_phy_mode: Change API to solve int/unit warnings") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20220428095317.538829-1-yangyingliang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit a9e9b091a1c14ecd8bd9d3214a62142a1786fe30 upstream.

Add of_node_put() if of_get_phy_mode() fails in mt7530_setup()

Fixes: 0c65b2b90d13 ("net: of_get_phy_mode: Change API to solve int/unit warnings")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220428095317.538829-1-yangyingliang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
net: ethernet: mediatek: add missing of_node_put() in mtk_sgmii_init() 2022-05-12T10:32:34+00:00 Yang Yingliang yangyingliang@huawei.com 2022-04-28T06:25:43+00:00 386c36bf3505bbb028de34ddc2728c94ca1a6207 commit ff5265d45345d01fefc98fcb9ae891b59633c919 upstream. The node pointer returned by of_parse_phandle() with refcount incremented, so add of_node_put() after using it in mtk_sgmii_init(). Fixes: 9ffee4a8276c ("net: ethernet: mediatek: Extend SGMII related functions") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20220428062543.64883-1-yangyingliang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit ff5265d45345d01fefc98fcb9ae891b59633c919 upstream.

The node pointer returned by of_parse_phandle() with refcount incremented,
so add of_node_put() after using it in mtk_sgmii_init().

Fixes: 9ffee4a8276c ("net: ethernet: mediatek: Extend SGMII related functions")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220428062543.64883-1-yangyingliang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>