linux-stable.git/drivers/net, branch v4.9.78

can: peak: fix potential bug in packet fragmentation

2018-01-23T18:57:08+00:00

commit d8a243af1a68395e07ac85384a2740d4134c67f4 upstream.

In some rare conditions when running one PEAK USB-FD interface over
a non high-speed USB controller, one useless USB fragment might be sent.
This patch fixes the way a USB command is fragmented when its length is
greater than 64 bytes and when the underlying USB controller is not a
high-speed one.

Signed-off-by: Stephane Grosjean 
Signed-off-by: Marc Kleine-Budde 
Signed-off-by: Greg Kroah-Hartman

e1000e: Fix e1000_check_for_copper_link_ich8lan return value.

2018-01-17T08:38:56+00:00

commit 4110e02eb45ea447ec6f5459c9934de0a273fb91 upstream.

e1000e_check_for_copper_link() and e1000_check_for_copper_link_ich8lan()
are the two functions that may be assigned to mac.ops.check_for_link when
phy.media_type == e1000_media_type_copper. Commit 19110cfbb34d ("e1000e:
Separate signaling for link check/link up") changed the meaning of the
return value of check_for_link for copper media but only adjusted the first
function. This patch adjusts the second function likewise.

Reported-by: Christian Hesse 
Reported-by: Gabriel C 
Link: https://bugzilla.kernel.org/show_bug.cgi?id=198047
Fixes: 19110cfbb34d ("e1000e: Separate signaling for link check/link up")
Signed-off-by: Benjamin Poirier 
Tested-by: Aaron Brown 
Tested-by: Christian Hesse 
Signed-off-by: Jeff Kirsher 
Signed-off-by: Greg Kroah-Hartman

mlxsw: spectrum_router: Fix NULL pointer deref

2018-01-17T08:38:53+00:00

[ Upstream commit 8764a8267b128405cf383157d5e9a4a3735d2409 ]

When we remove the neighbour associated with a nexthop we should always
refuse to write the nexthop to the adjacency table. Regardless if it is
already present in the table or not.

Otherwise, we risk dereferencing the NULL pointer that was set instead
of the neighbour.

Fixes: a7ff87acd995 ("mlxsw: spectrum_router: Implement next-hop routing")
Signed-off-by: Ido Schimmel 
Reported-by: Alexander Petrovskiy 
Signed-off-by: Jiri Pirko 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: stmmac: enable EEE in MII, GMII or RGMII only

2018-01-17T08:38:53+00:00

[ Upstream commit 879626e3a52630316d817cbda7cec9a5446d1d82 ]

Note in the databook - Section 4.4 - EEE :
" The EEE feature is not supported when the MAC is configured to use the
TBI, RTBI, SMII, RMII or SGMII single PHY interface. Even if the MAC
supports multiple PHY interfaces, you should activate the EEE mode only
when the MAC is operating with GMII, MII, or RGMII interface."

Applying this restriction solves a stability issue observed on Amlogic
gxl platforms operating with RMII interface and the internal PHY.

Fixes: 83bf79b6bb64 ("stmmac: disable at run-time the EEE if not supported")
Signed-off-by: Jerome Brunet 
Tested-by: Arnaud Patard 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

sh_eth: fix SH7757 GEther initialization

2018-01-17T08:38:53+00:00

[ Upstream commit 5133550296d43236439494aa955bfb765a89f615 ]

Renesas  SH7757 has 2 Fast and 2 Gigabit Ether controllers, while the
'sh_eth' driver can only reset and initialize TSU of the first controller
pair. Shimoda-san tried to solve that adding the 'needs_init' member to the
'struct sh_eth_plat_data', however the platform code still never sets this
flag. I think  that we can infer this information from the 'devno' variable
(set  to 'platform_device::id') and reset/init the Ether controller pair
only for an even 'devno'; therefore 'sh_eth_plat_data::needs_init' can be
removed...

Fixes: 150647fb2c31 ("net: sh_eth: change the condition of initialization")
Signed-off-by: Sergei Shtylyov 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

sh_eth: fix TSU resource handling

2018-01-17T08:38:53+00:00

[ Upstream commit dfe8266b8dd10e12a731c985b725fcf7f0e537f0 ]

When switching  the driver to the managed device API,  I managed to break
the  case of a  dual Ether devices sharing a single TSU: the 2nd Ether port
wouldn't probe. Iwamatsu-san has tried to fix this but his patch was buggy
and he then dropped the ball...

The solution is to  limit calling devm_request_mem_region() to the first
of  the two  ports  sharing the same TSU, so devm_ioremap_resource() can't
be used anymore for the TSU resource...

Fixes: d5e07e69218f ("sh_eth: use managed device API")
Reported-by: Nobuhiro Iwamatsu 
Signed-off-by: Sergei Shtylyov 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

cx82310_eth: use skb_cow_head() to deal with cloned skbs

2018-01-17T08:38:52+00:00

commit a9e840a2081ed28c2b7caa6a9a0041c950b3c37d upstream.

We need to ensure there is enough headroom to push extra header,
but we also need to check if we are allowed to change headers.

skb_cow_head() is the proper helper to deal with this.

Fixes: cc28a20e77b2 ("introduce cx82310_eth: Conexant CX82310-based ADSL router USB ethernet driver")
Signed-off-by: Eric Dumazet 
Cc: James Hughes 
Signed-off-by: David S. Miller 
Signed-off-by: Oliver Neukum 
Signed-off-by: Greg Kroah-Hartman

smsc75xx: use skb_cow_head() to deal with cloned skbs

2018-01-17T08:38:52+00:00

commit b7c6d2675899cfff0180412c63fc9cbd5bacdb4d upstream.

We need to ensure there is enough headroom to push extra header,
but we also need to check if we are allowed to change headers.

skb_cow_head() is the proper helper to deal with this.

Fixes: d0cad871703b ("smsc75xx: SMSC LAN75xx USB gigabit ethernet adapter driver")
Signed-off-by: Eric Dumazet 
Cc: James Hughes 
Signed-off-by: David S. Miller 
Signed-off-by: Oliver Neukum 
Signed-off-by: Greg Kroah-Hartman

sr9700: use skb_cow_head() to deal with cloned skbs

2018-01-17T08:38:52+00:00

commit d532c1082f68176363ed766d09bf187616e282fe upstream.

We need to ensure there is enough headroom to push extra header,
but we also need to check if we are allowed to change headers.

skb_cow_head() is the proper helper to deal with this.

Fixes: c9b37458e956 ("USB2NET : SR9700 : One chip USB 1.1 USB2NET SR9700Device Driver Support")
Signed-off-by: Eric Dumazet 
Cc: James Hughes 
Signed-off-by: David S. Miller 
Signed-off-by: Oliver Neukum 
Signed-off-by: Greg Kroah-Hartman

lan78xx: use skb_cow_head() to deal with cloned skbs

2018-01-17T08:38:52+00:00

commit d4ca73591916b760478d2b04334d5dcadc028e9c upstream.

We need to ensure there is enough headroom to push extra header,
but we also need to check if we are allowed to change headers.

skb_cow_head() is the proper helper to deal with this.

Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver")
Signed-off-by: Eric Dumazet 
Cc: James Hughes 
Cc: Woojung Huh 
Signed-off-by: David S. Miller 
Signed-off-by: Oliver Neukum 
Signed-off-by: Greg Kroah-Hartman