linux-stable.git/drivers/net, branch v4.9.293

net/qla3xxx: fix an error code in ql_adapter_up()

2021-12-14T09:04:49+00:00

commit d17b9737c2bc09b4ac6caf469826e5a7ce3ffab7 upstream.

The ql_wait_for_drvr_lock() fails and returns false, then this
function should return an error code instead of returning success.

The other problem is that the success path prints an error message
netdev_err(ndev, "Releasing driver lock\n");  Delete that and
re-order the code a little to make it more clear.

Fixes: 5a4faa873782 ("[PATCH] qla3xxx NIC driver")
Signed-off-by: Dan Carpenter 
Link: https://lore.kernel.org/r/20211207082416.GA16110@kili
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

net: fec: only clear interrupt of handling queue in fec_enet_rx_queue()

2021-12-14T09:04:49+00:00

commit b5bd95d17102b6719e3531d627875b9690371383 upstream.

Background:
We have a customer is running a Profinet stack on the 8MM which receives and
responds PNIO packets every 4ms and PNIO-CM packets every 40ms. However, from
time to time the received PNIO-CM package is "stock" and is only handled when
receiving a new PNIO-CM or DCERPC-Ping packet (tcpdump shows the PNIO-CM and
the DCERPC-Ping packet at the same time but the PNIO-CM HW timestamp is from
the expected 40 ms and not the 2s delay of the DCERPC-Ping).

After debugging, we noticed PNIO, PNIO-CM and DCERPC-Ping packets would
be handled by different RX queues.

The root cause should be driver ack all queues' interrupt when handle a
specific queue in fec_enet_rx_queue(). The blamed patch is introduced to
receive as much packets as possible once to avoid interrupt flooding.
But it's unreasonable to clear other queues'interrupt when handling one
queue, this patch tries to fix it.

Fixes: ed63f1dcd578 (net: fec: clear receive interrupts before processing a packet)
Cc: Russell King 
Reported-by: Nicolas Diaz 
Signed-off-by: Joakim Zhang 
Link: https://lore.kernel.org/r/20211206135457.15946-1-qiangqing.zhang@nxp.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

net: altera: set a couple error code in probe()

2021-12-14T09:04:49+00:00

commit badd7857f5c933a3dc34942a2c11d67fdbdc24de upstream.

There are two error paths which accidentally return success instead of
a negative error code.

Fixes: bbd2190ce96d ("Altera TSE: Add main and header file for Altera Ethernet Driver")
Signed-off-by: Dan Carpenter 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: cdc_ncm: Allow for dwNtbOutMaxSize to be unset or zero

2021-12-14T09:04:48+00:00

commit 2be6d4d16a0849455a5c22490e3c5983495fed00 upstream.

Currently, due to the sequential use of min_t() and clamp_t() macros,
in cdc_ncm_check_tx_max(), if dwNtbOutMaxSize is not set, the logic
sets tx_max to 0.  This is then used to allocate the data area of the
SKB requested later in cdc_ncm_fill_tx_frame().

This does not cause an issue presently because when memory is
allocated during initialisation phase of SKB creation, more memory
(512b) is allocated than is required for the SKB headers alone (320b),
leaving some space (512b - 320b = 192b) for CDC data (172b).

However, if more elements (for example 3 x u64 = [24b]) were added to
one of the SKB header structs, say 'struct skb_shared_info',
increasing its original size (320b [320b aligned]) to something larger
(344b [384b aligned]), then suddenly the CDC data (172b) no longer
fits in the spare SKB data area (512b - 384b = 128b).

Consequently the SKB bounds checking semantics fails and panics:

  skbuff: skb_over_panic: text:ffffffff830a5b5f len:184 put:172   \
     head:ffff888119227c00 data:ffff888119227c00 tail:0xb8 end:0x80 dev:

  ------------[ cut here ]------------
  kernel BUG at net/core/skbuff.c:110!
  RIP: 0010:skb_panic+0x14f/0x160 net/core/skbuff.c:106
  
  Call Trace:
   
   skb_over_panic+0x2c/0x30 net/core/skbuff.c:115
   skb_put+0x205/0x210 net/core/skbuff.c:1877
   skb_put_zero include/linux/skbuff.h:2270 [inline]
   cdc_ncm_ndp16 drivers/net/usb/cdc_ncm.c:1116 [inline]
   cdc_ncm_fill_tx_frame+0x127f/0x3d50 drivers/net/usb/cdc_ncm.c:1293
   cdc_ncm_tx_fixup+0x98/0xf0 drivers/net/usb/cdc_ncm.c:1514

By overriding the max value with the default CDC_NCM_NTB_MAX_SIZE_TX
when not offered through the system provided params, we ensure enough
data space is allocated to handle the CDC data, meaning no crash will
occur.

Cc: Oliver Neukum 
Fixes: 289507d3364f9 ("net: cdc_ncm: use sysfs for rx/tx aggregation tuning")
Signed-off-by: Lee Jones 
Reviewed-by: Bjørn Mork 
Link: https://lore.kernel.org/r/20211202143437.1411410-1-lee.jones@linaro.org
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

can: pch_can: pch_can_rx_normal: fix use after free

2021-12-14T09:04:48+00:00

commit 94cddf1e9227a171b27292509d59691819c458db upstream.

After calling netif_receive_skb(skb), dereferencing skb is unsafe.
Especially, the can_frame cf which aliases skb memory is dereferenced
just after the call netif_receive_skb(skb).

Reordering the lines solves the issue.

Fixes: b21d18b51b31 ("can: Topcliff: Add PCH_CAN driver.")
Link: https://lore.kernel.org/all/20211123111654.621610-1-mailhol.vincent@wanadoo.fr
Cc: stable@vger.kernel.org
Signed-off-by: Vincent Mailhol 
Signed-off-by: Marc Kleine-Budde 
Signed-off-by: Greg Kroah-Hartman

can: sja1000: fix use after free in ems_pcmcia_add_card()

2021-12-14T09:04:47+00:00

commit 3ec6ca6b1a8e64389f0212b5a1b0f6fed1909e45 upstream.

If the last channel is not available then "dev" is freed.  Fortunately,
we can just use "pdev->irq" instead.

Also we should check if at least one channel was set up.

Fixes: fd734c6f25ae ("can/sja1000: add driver for EMS PCMCIA card")
Link: https://lore.kernel.org/all/20211124145041.GB13656@kili
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter 
Acked-by: Oliver Hartkopp 
Tested-by: Oliver Hartkopp 
Signed-off-by: Marc Kleine-Budde 
Signed-off-by: Greg Kroah-Hartman

net: qlogic: qlcnic: Fix a NULL pointer dereference in qlcnic_83xx_add_rings()

2021-12-08T07:45:06+00:00

commit e2dabc4f7e7b60299c20a36d6a7b24ed9bf8e572 upstream.

In qlcnic_83xx_add_rings(), the indirect function of
ahw->hw_ops->alloc_mbx_args will be called to allocate memory for
cmd.req.arg, and there is a dereference of it in qlcnic_83xx_add_rings(),
which could lead to a NULL pointer dereference on failure of the
indirect function like qlcnic_83xx_alloc_mbx_args().

Fix this bug by adding a check of alloc_mbx_args(), this patch
imitates the logic of mbx_cmd()'s failure handling.

This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.

Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.

Builds with CONFIG_QLCNIC=m show no new warnings, and our
static analyzer no longer warns about this code.

Fixes: 7f9664525f9c ("qlcnic: 83xx memory map and HW access routine")
Signed-off-by: Zhou Qingyang 
Link: https://lore.kernel.org/r/20211130110848.109026-1-zhou1615@umn.edu
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

natsemi: xtensa: fix section mismatch warnings

2021-12-08T07:45:06+00:00

commit b0f38e15979fa8851e88e8aa371367f264e7b6e9 upstream.

Fix section mismatch warnings in xtsonic. The first one appears to be
bogus and after fixing the second one, the first one is gone.

WARNING: modpost: vmlinux.o(.text+0x529adc): Section mismatch in reference from the function sonic_get_stats() to the function .init.text:set_reset_devices()
The function sonic_get_stats() references
the function __init set_reset_devices().
This is often because sonic_get_stats lacks a __init
annotation or the annotation of set_reset_devices is wrong.

WARNING: modpost: vmlinux.o(.text+0x529b3b): Section mismatch in reference from the function xtsonic_probe() to the function .init.text:sonic_probe1()
The function xtsonic_probe() references
the function __init sonic_probe1().
This is often because xtsonic_probe lacks a __init
annotation or the annotation of sonic_probe1 is wrong.

Fixes: 74f2a5f0ef64 ("xtensa: Add support for the Sonic Ethernet device for the XT2000 board.")
Signed-off-by: Randy Dunlap 
Reported-by: kernel test robot 
Cc: Christophe JAILLET 
Cc: Finn Thain 
Cc: Chris Zankel 
Cc: linux-xtensa@linux-xtensa.org
Cc: Thomas Bogendoerfer 
Acked-by: Max Filippov 
Link: https://lore.kernel.org/r/20211130063947.7529-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

vrf: Reset IPCB/IP6CB when processing outbound pkts in vrf dev xmit

2021-12-08T07:45:06+00:00

commit ee201011c1e1563c114a55c86eb164b236f18e84 upstream.

IPCB/IP6CB need to be initialized when processing outbound v4 or v6 pkts
in the codepath of vrf device xmit function so that leftover garbage
doesn't cause futher code that uses the CB to incorrectly process the
pkt.

One occasion of the issue might occur when MPLS route uses the vrf
device as the outgoing device such as when the route is added using "ip
-f mpls route add  dev " command.

The problems seems to exist since day one. Hence I put the day one
commits on the Fixes tags.

Fixes: 193125dbd8eb ("net: Introduce VRF device driver")
Fixes: 35402e313663 ("net: Add IPv6 support to VRF device")
Cc: stable@vger.kernel.org
Signed-off-by: Stephen Suryaputra 
Reviewed-by: David Ahern 
Link: https://lore.kernel.org/r/20211130162637.3249-1-ssuryaextr@gmail.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

net: ethernet: dec: tulip: de4x5: fix possible array overflows in type3_infoblock()

2021-12-08T07:45:05+00:00

[ Upstream commit 0fa68da72c3be09e06dd833258ee89c33374195f ]

The definition of macro MOTO_SROM_BUG is:
  #define MOTO_SROM_BUG    (lp->active == 8 && (get_unaligned_le32(
  dev->dev_addr) & 0x00ffffff) == 0x3e0008)

and the if statement
  if (MOTO_SROM_BUG) lp->active = 0;

using this macro indicates lp->active could be 8. If lp->active is 8 and
the second comparison of this macro is false. lp->active will remain 8 in:
  lp->phy[lp->active].gep = (*p ? p : NULL); p += (2 * (*p) + 1);
  lp->phy[lp->active].rst = (*p ? p : NULL); p += (2 * (*p) + 1);
  lp->phy[lp->active].mc  = get_unaligned_le16(p); p += 2;
  lp->phy[lp->active].ana = get_unaligned_le16(p); p += 2;
  lp->phy[lp->active].fdx = get_unaligned_le16(p); p += 2;
  lp->phy[lp->active].ttm = get_unaligned_le16(p); p += 2;
  lp->phy[lp->active].mci = *p;

However, the length of array lp->phy is 8, so array overflows can occur.
To fix these possible array overflows, we first check lp->active and then
return -EINVAL if it is greater or equal to ARRAY_SIZE(lp->phy) (i.e. 8).

Reported-by: TOTE Robot 
Signed-off-by: Teng Qi 
Reviewed-by: Arnd Bergmann 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin