linux-stable.git/drivers/net, branch v4.4.286

e100: fix buffer overrun in e100_get_regs

2021-10-06T08:22:25+00:00

[ Upstream commit 51032e6f17ce990d06123ad7307f258c50d25aa7 ]

The e100_get_regs function is used to implement a simple register dump
for the e100 device. The data is broken into a couple of MAC control
registers, and then a series of PHY registers, followed by a memory dump
buffer.

The total length of the register dump is defined as (1 + E100_PHY_REGS)
* sizeof(u32) + sizeof(nic->mem->dump_buf).

The logic for filling in the PHY registers uses a convoluted inverted
count for loop which counts from E100_PHY_REGS (0x1C) down to 0, and
assigns the slots 1 + E100_PHY_REGS - i. The first loop iteration will
fill in [1] and the final loop iteration will fill in [1 + 0x1C]. This
is actually one more than the supposed number of PHY registers.

The memory dump buffer is then filled into the space at
[2 + E100_PHY_REGS] which will cause that memcpy to assign 4 bytes past
the total size.

The end result is that we overrun the total buffer size allocated by the
kernel, which could lead to a panic or other issues due to memory
corruption.

It is difficult to determine the actual total number of registers
here. The only 8255x datasheet I could find indicates there are 28 total
MDI registers. However, we're reading 29 here, and reading them in
reverse!

In addition, the ethtool e100 register dump interface appears to read
the first PHY register to determine if the device is in MDI or MDIx
mode. This doesn't appear to be documented anywhere within the 8255x
datasheet. I can only assume it must be in register 28 (the extra
register we're reading here).

Lets not change any of the intended meaning of what we copy here. Just
extend the space by 4 bytes to account for the extra register and
continue copying the data out in the same order.

Change the E100_PHY_REGS value to be the correct total (29) so that the
total register dump size is calculated properly. Fix the offset for
where we copy the dump buffer so that it doesn't overrun the total size.

Re-write the for loop to use counting up instead of the convoluted
down-counting. Correct the mdio_read offset to use the 0-based register
offsets, but maintain the bizarre reverse ordering so that we have the
ABI expected by applications like ethtool. This requires and additional
subtraction of 1. It seems a bit odd but it makes the flow of assignment
into the register buffer easier to follow.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Felicitas Hetzelt 
Signed-off-by: Jacob Keller 
Tested-by: Jacob Keller 
Signed-off-by: Tony Nguyen 
Signed-off-by: Sasha Levin

e100: fix length calculation in e100_get_regs_len

2021-10-06T08:22:24+00:00

[ Upstream commit 4329c8dc110b25d5f04ed20c6821bb60deff279f ]

commit abf9b902059f ("e100: cleanup unneeded math") tried to simplify
e100_get_regs_len and remove a double 'divide and then multiply'
calculation that the e100_reg_regs_len function did.

This change broke the size calculation entirely as it failed to account
for the fact that the numbered registers are actually 4 bytes wide and
not 1 byte. This resulted in a significant under allocation of the
register buffer used by e100_get_regs.

Fix this by properly multiplying the register count by u32 first before
adding the size of the dump buffer.

Fixes: abf9b902059f ("e100: cleanup unneeded math")
Reported-by: Felicitas Hetzelt 
Signed-off-by: Jacob Keller 
Signed-off-by: Tony Nguyen 
Signed-off-by: Sasha Levin

net: 6pack: Fix tx timeout and slot time

2021-10-06T08:22:24+00:00

[ Upstream commit 3c0d2a46c0141913dc6fd126c57d0615677d946e ]

tx timeout and slot time are currently specified in units of HZ.  On
Alpha, HZ is defined as 1024.  When building alpha:allmodconfig, this
results in the following error message.

  drivers/net/hamradio/6pack.c: In function 'sixpack_open':
  drivers/net/hamradio/6pack.c:71:41: error:
  	unsigned conversion from 'int' to 'unsigned char'
  	changes value from '256' to '0'

In the 6PACK protocol, tx timeout is specified in units of 10 ms and
transmitted over the wire:

    https://www.linux-ax25.org/wiki/6PACK

Defining a value dependent on HZ doesn't really make sense, and
presumably comes from the (very historical) situation where HZ was
originally 100.

Note that the SIXP_SLOTTIME use explicitly is about 10ms granularity:

        mod_timer(&sp->tx_t, jiffies + ((when + 1) * HZ) / 100);

and the SIXP_TXDELAY walue is sent as a byte over the wire.

Signed-off-by: Guenter Roeck 
Signed-off-by: Linus Torvalds 
Signed-off-by: Sasha Levin

net: i825xx: Use absolute_pointer for memcpy from fixed memory location

2021-10-06T08:22:24+00:00

[ Upstream commit dff2d13114f0beec448da9b3716204eb34b0cf41 ]

gcc 11.x reports the following compiler warning/error.

  drivers/net/ethernet/i825xx/82596.c: In function 'i82596_probe':
  arch/m68k/include/asm/string.h:72:25: error:
	'__builtin_memcpy' reading 6 bytes from a region of size 0 [-Werror=stringop-overread]

Use absolute_pointer() to work around the problem.

Cc: Geert Uytterhoeven 
Signed-off-by: Guenter Roeck 
Reviewed-by: Geert Uytterhoeven 
Signed-off-by: Linus Torvalds 
Signed-off-by: Sasha Levin

net/mlx4_en: Don't allow aRFS for encapsulated packets

2021-10-06T08:22:23+00:00

[ Upstream commit fdbccea419dc782079ce5881d2705cc9e3881480 ]

Driver doesn't support aRFS for encapsulated packets, return early error
in such a case.

Fixes: 1eb8c695bda9 ("net/mlx4_en: Add accelerated RFS support")
Signed-off-by: Aya Levin 
Signed-off-by: Tariq Toukan 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

net: hso: fix muxed tty registration

2021-10-06T08:22:23+00:00

commit e8f69b16ee776da88589b5271e3f46020efc8f6c upstream.

If resource allocation and registration fail for a muxed tty device
(e.g. if there are no more minor numbers) the driver should not try to
deregister the never-registered (or already-deregistered) tty.

Fix up the error handling to avoid dereferencing a NULL pointer when
attempting to remove the character device.

Fixes: 72dc1c096c70 ("HSO: add option hso driver")
Cc: stable@vger.kernel.org	# 2.6.27
Signed-off-by: Johan Hovold 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: renesas: sh_eth: Fix freeing wrong tx descriptor

2021-09-22T09:41:28+00:00

[ Upstream commit 0341d5e3d1ee2a36dd5a49b5bef2ce4ad1cfa6b4 ]

The cur_tx counter must be incremented after TACT bit of
txdesc->status was set. However, a CPU is possible to reorder
instructions and/or memory accesses between cur_tx and
txdesc->status. And then, if TX interrupt happened at such a
timing, the sh_eth_tx_free() may free the descriptor wrongly.
So, add wmb() before cur_tx++.
Otherwise NETDEV WATCHDOG timeout is possible to happen.

Fixes: 86a74ff21a7a ("net: sh_eth: add support for Renesas SuperH Ethernet")
Signed-off-by: Yoshihiro Shimoda 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

qlcnic: Remove redundant unlock in qlcnic_pinit_from_rom

2021-09-22T09:41:28+00:00

[ Upstream commit 9ddbc2a00d7f63fa9748f4278643193dac985f2d ]

Previous commit 68233c583ab4 removes the qlcnic_rom_lock()
in qlcnic_pinit_from_rom(), but remains its corresponding
unlock function, which is odd. I'm not very sure whether the
lock is missing, or the unlock is redundant. This bug is
suggested by a static analysis tool, please advise.

Fixes: 68233c583ab4 ("qlcnic: updated reset sequence")
Signed-off-by: Dinghao Liu 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

ethtool: Fix an error code in cxgb2.c

2021-09-22T09:41:27+00:00

[ Upstream commit 7db8263a12155c7ae4ad97e850f1e499c73765fc ]

When adapter->registered_device_map is NULL, the value of err is
uncertain, we set err to -EINVAL to avoid ambiguity.

Clean up smatch warning:
drivers/net/ethernet/chelsio/cxgb/cxgb2.c:1114 init_one() warn: missing
error code 'err'

Reported-by: Abaci Robot 
Signed-off-by: Yang Li 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

r6040: Restore MDIO clock frequency after MAC reset

2021-09-22T09:41:27+00:00

commit e3f0cc1a945fcefec0c7c9d9dfd028a51daa1846 upstream.

A number of users have reported that they were not able to get the PHY
to successfully link up, especially after commit c36757eb9dee ("net:
phy: consider AN_RESTART status when reading link status") where we
stopped reading just BMSR, but we also read BMCR to determine the link
status.

Andrius at NetBSD did a wonderful job at debugging the problem
and found out that the MDIO bus clock frequency would be incorrectly set
back to its default value which would prevent the MDIO bus controller
from reading PHY registers properly. Back when we only read BMSR, if we
read all 1s, we could falsely indicate a link status, though in general
there is a cable plugged in, so this went unnoticed. After a second read
of BMCR was added, a wrong read will lead to the inability to determine
a link UP condition which is when it started to be visibly broken, even
if it was long before that.

The fix consists in restoring the value of the MD_CSR register that was
set prior to the MAC reset.

Link: http://gnats.netbsd.org/cgi-bin/query-pr-single.pl?number=53494
Fixes: 90f750a81a29 ("r6040: consolidate MAC reset to its own function")
Reported-by: Andrius V 
Reported-by: Darek Strugacz 
Tested-by: Darek Strugacz 
Signed-off-by: Florian Fainelli 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman