linux-stable.git/drivers/net, branch v4.2.2

stmmac: fix check for phydev being open

2015-09-29T17:33:36+00:00

commit dfc50fcaad574e5c8c85cbc83eca1426b2413fa4 upstream.

Current check of phydev with IS_ERR(phydev) may make not much sense
because of_phy_connect() returns NULL on failure instead of error value.

Still for checking result of phy_connect() IS_ERR() makes perfect sense.

So let's use combined check IS_ERR_OR_NULL() that covers both cases.

Cc: Sergei Shtylyov 
Cc: Giuseppe Cavallaro 
Cc: linux-kernel@vger.kernel.org
Cc: David Miller 
Signed-off-by: Alexey Brodkin 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

tg3: Fix temperature reporting

2015-09-29T17:33:17+00:00

commit d3d11fe08ccc9bff174fc958722b5661f0932486 upstream.

The temperature registers appear to report values in degrees Celsius
while the hwmon API mandates values to be exposed in millidegrees
Celsius. Do the conversion so that the values reported by "sensors"
are correct.

Fixes: aed93e0bf493 ("tg3: Add hwmon support for temperature")
Signed-off-by: Jean Delvare 
Cc: Prashant Sreedharan 
Cc: Michael Chan 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

igb: Fix oops caused by missing queue pairing

2015-09-29T17:33:17+00:00

commit 72ddef0506da852dc82f078f37ced8ef4d74a2bf upstream.

When initializing igb driver (e.g. 82576, I350), IGB_FLAG_QUEUE_PAIRS is
set if adapter->rss_queues exceeds half of max_rss_queues in
igb_init_queue_configuration().
On the other hand, IGB_FLAG_QUEUE_PAIRS is not set even if the number of
queues exceeds half of max_combined in igb_set_channels() when changing
the number of queues by "ethtool -L".
In this case, if numvecs is larger than MAX_MSIX_ENTRIES (10), the size
of adapter->msix_entries[], an overflow can occur in
igb_set_interrupt_capability(), which in turn leads to an oops.

Fix this problem as follows:
 - When changing the number of queues by "ethtool -L", set
   IGB_FLAG_QUEUE_PAIRS in the same way as initializing igb driver.
 - When increasing the size of q_vector, reallocate it appropriately.
   (With IGB_FLAG_QUEUE_PAIRS set, the size of q_vector gets larger.)

Another possible way to fix this problem is to cap the queues at its
initial number, which is the number of the initial online cpus. But this
is not the optimal way because we cannot increase queues when another
cpu becomes online.

Note that before commit cd14ef54d25b ("igb: Change to use statically
allocated array for MSIx entries"), this problem did not cause oops
but just made the number of queues become 1 because of entering msi_only
mode in igb_set_interrupt_capability().

Fixes: 907b7835799f ("igb: Add ethtool support to configure number of channels")
Signed-off-by: Shota Suzuki 
Tested-by: Aaron Brown 
Signed-off-by: Jeff Kirsher 
Signed-off-by: Greg Kroah-Hartman

rtlwifi: rtl8821ae: Fix an expression that is always false

2015-09-29T17:33:16+00:00

commit 251086f588720277a6f5782020a648ce32c4e00b upstream.

In routine _rtl8821ae_set_media_status(), an incorrect mask results in a test
for AP status to always be false. Similar bugs were fixed in rtl8192cu and
rtl8192de, but this instance was missed at that time.

Reported-by: David Binderman 
Signed-off-by: Larry Finger 
Cc: David Binderman 
Signed-off-by: Kalle Valo 
Signed-off-by: Greg Kroah-Hartman

rtlwifi: rtl8192cu: Add new device ID

2015-09-29T17:33:16+00:00

commit 1642d09fb9b128e8e538b2a4179962a34f38dff9 upstream.

The v2 of NetGear WNA1000M uses a different idProduct: USB ID 0846:9043

Signed-off-by: Adrien Schildknecht 
Acked-by: Larry Finger 
Signed-off-by: Kalle Valo 
Signed-off-by: Greg Kroah-Hartman

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2015-08-28T00:52:38+00:00

Pull networking fixes from David Miller:
 "Some straggler bug fixes here:

   1) Netlink_sendmsg() doesn't check iterator type properly in mmap
      case, from Ken-ichirou MATSUZAWA.

   2) Don't sleep in atomic context in bcmgenet driver, from Florian
      Fainelli.

   3) The pfkey_broadcast() code patch can't actually ever use anything
      other than GFP_ATOMIC.  And the cases that right now pass
      GFP_KERNEL or similar will currently trigger an RCU splat.  Just
      use GFP_ATOMIC unconditionally.  From David Ahern.

   4) Fix FD bit timings handling in pcan_usb driver, from Marc
      Kleine-Budde.

   5) Cache dst leaked in ip6_gre tunnel removal, fix from Huaibin Wang.

   6) Traversal into drivers/net/ethernet/renesas should be triggered by
      CONFIG_NET_VENDOR_RENESAS, not a particular driver's config
      option.  From Kazuya Mizuguchi.

   7) Fix regression in handling of igmp_join errors in vxlan, from
      Marcelo Ricardo Leitner.

   8) Make phy_{read,write}_mmd_indirect() properly take the mdio_lock
      mutex when programming the registers.  From Russell King.

   9) Fix non-forced handling in u32_destroy(), from WANG Cong.

  10) Test the EVENT_NO_RUNTIME_PM flag before it is cleared in
      usbnet_stop(), from Eugene Shatokhin.

  11) In sfc driver, don't fetch statistics firmware isn't capable of,
      from Bert Kenward.

  12) Verify ASCONF address parameter location in SCTP, from Xin Long"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  sctp: donot reset the overall_error_count in SHUTDOWN_RECEIVE state
  sctp: asconf's process should verify address parameter is in the beginning
  sfc: only use vadaptor stats if firmware is capable
  net: phy: fixed: propagate fixed link values to struct
  usbnet: Get EVENT_NO_RUNTIME_PM bit before it is cleared
  drivers: net: xgene: fix: Oops in linkwatch_fire_event
  cls_u32: complete the check for non-forced case in u32_destroy()
  net: fec: use reinit_completion() in mdio accessor functions
  net: phy: add locking to phy_read_mmd_indirect()/phy_write_mmd_indirect()
  vxlan: re-ignore EADDRINUSE from igmp_join
  net: compile renesas directory if NET_VENDOR_RENESAS is configured
  ip6_gre: release cached dst on tunnel removal
  phylib: Make PHYs children of their MDIO bus, not the bus' parent.
  can: pcan_usb: don't provide CAN FD bittimings by non-FD adapters
  net: Fix RCU splat in af_key
  net: bcmgenet: fix uncleaned dma flags
  net: bcmgenet: Avoid sleeping in bcmgenet_timeout
  netlink: mmap: fix tx type check

sfc: only use vadaptor stats if firmware is capable

2015-08-27T18:27:01+00:00

Some of the stats handling code differs based on SR-IOV support,
and SRIOV support is only available if full-featured firmware is
used.
Do not use vadaptor stats if firmware mode is not set to
full-featured.

Signed-off-by: Shradha Shah 
Signed-off-by: David S. Miller

net: phy: fixed: propagate fixed link values to struct

2015-08-27T18:24:49+00:00

The fixed link values parsed from the device tree are stored in
the struct fixed_phy member status. The struct phy_device members
speed, duplex were not updated.

Signed-off-by: Madalin Bucur 
Reviewed-by: Florian Fainelli 
Signed-off-by: David S. Miller

usbnet: Get EVENT_NO_RUNTIME_PM bit before it is cleared

2015-08-26T02:44:13+00:00

It is needed to check EVENT_NO_RUNTIME_PM bit of dev->flags in
usbnet_stop(), but its value should be read before it is cleared
when dev->flags is set to 0.

The problem was spotted and the fix was provided by
Oliver Neukum .

Signed-off-by: Eugene Shatokhin 
Acked-by: Oliver Neukum 
Signed-off-by: David S. Miller

drivers: net: xgene: fix: Oops in linkwatch_fire_event

2015-08-26T00:05:44+00:00

[ 1065.801569] Internal error: Oops: 96000006 [#1] SMP
...
[ 1065.866655] Hardware name: AppliedMicro Mustang/Mustang, BIOS 1.1.0 Apr 22 2015
[ 1065.873937] Workqueue: events_power_efficient phy_state_machine
[ 1065.879837] task: fffffe01de105e80 ti: fffffe00bcf18000 task.ti: fffffe00bcf18000
[ 1065.887288] PC is at linkwatch_fire_event+0xac/0xc0
[ 1065.892141] LR is at linkwatch_fire_event+0xa0/0xc0
[ 1065.896995] pc : [] lr : [] pstate: 200001c5
[ 1065.904356] sp : fffffe00bcf1bd00
...
[ 1066.196813] Call Trace:
[ 1066.199248] [] linkwatch_fire_event+0xac/0xc0
[ 1066.205140] [] netif_carrier_off+0x54/0x64
[ 1066.210773] [] phy_state_machine+0x120/0x3bc
[ 1066.216578] [] process_one_work+0x15c/0x3a8
[ 1066.222296] [] worker_thread+0x134/0x470
[ 1066.227757] [] kthread+0xe0/0xf8
[ 1066.232525] Code: 97f65ee9 f9420660 d538d082 8b000042 (885f7c40)

The fix is to call phy_disconnect() from xgene_enet_mdio_remove,
which in turn call cancel_delayed_work_sync().

Signed-off-by: Iyappan Subramanian 
Signed-off-by: David S. Miller