linux-stable.git/drivers/net, branch v4.19.98

cw1200: Fix a signedness bug in cw1200_load_firmware()

2020-01-23T07:21:36+00:00

commit 4a50d454502f1401171ff061a5424583f91266db upstream.

The "priv->hw_type" is an enum and in this context GCC will treat it
as an unsigned int so the error handling will never trigger.

Fixes: a910e4a94f69 ("cw1200: add driver for the ST-E CW1100 & CW1200 WLAN chipsets")
Signed-off-by: Dan Carpenter 
Signed-off-by: Kalle Valo 
Signed-off-by: Greg Kroah-Hartman

mlxsw: spectrum_qdisc: Include MC TCs in Qdisc counters

2020-01-23T07:21:36+00:00

commit 85005b82e59fa7bb7388b12594ab2067bf73d66c upstream.

mlxsw configures Spectrum in such a way that BUM traffic is passed not
through its nominal traffic class TC, but through its MC counterpart TC+8.
However, when collecting statistics, Qdiscs only look at the nominal TC and
ignore the MC TC.

Add two helpers to compute the value for logical TC from the constituents,
one for backlog, the other for tail drops. Use them throughout instead of
going through the xstats pointer directly.

Counters for TX bytes and packets are deduced from packet priority
counters, and therefore already include BUM traffic. wred_drop counter is
irrelevant on MC TCs, because RED is not enabled on them.

Fixes: 7b8195306694 ("mlxsw: spectrum: Configure MC-aware mode on mlxsw ports")
Signed-off-by: Petr Machata 
Acked-by: Jiri Pirko 
Signed-off-by: Ido Schimmel 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

mlxsw: spectrum: Wipe xstats.backlog of down ports

2020-01-23T07:21:36+00:00

commit ca7609ff3680c51d6c29897f3117aa2ad904f92a upstream.

Per-port counter cache used by Qdiscs is updated periodically, unless the
port is down. The fact that the cache is not updated for down ports is no
problem for most counters, which are relative in nature. However, backlog
is absolute in nature, and if there is a non-zero value in the cache around
the time that the port goes down, that value just stays there. This value
then leaks to offloaded Qdiscs that report non-zero backlog even if
there (obviously) is no traffic.

The HW does not keep backlog of a downed port, so do likewise: as the port
goes down, wipe the backlog value from xstats.

Fixes: 075ab8adaf4e ("mlxsw: spectrum: Collect tclass related stats periodically")
Signed-off-by: Petr Machata 
Acked-by: Jiri Pirko 
Signed-off-by: Ido Schimmel 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

sh_eth: check sh_eth_cpu_data::dual_port when dumping registers

2020-01-23T07:21:36+00:00

commit 3249b1e442a1be1a6b9f1026785b519d1443f807 upstream.

When adding the sh_eth_cpu_data::dual_port flag I forgot to add the flag
checks to __sh_eth_get_regs(), causing the non-existing TSU registers to
be dumped by 'ethtool' on the single port Ether controllers having TSU...

Fixes: a94cf2a614f8 ("sh_eth: fix TSU init on SH7734/R8A7740")
Signed-off-by: Sergei Shtylyov 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

r8152: add missing endpoint sanity check

2020-01-23T07:21:35+00:00

[ Upstream commit 86f3f4cd53707ceeec079b83205c8d3c756eca93 ]

Add missing endpoint sanity check to probe in order to prevent a
NULL-pointer dereference (or slab out-of-bounds access) when retrieving
the interrupt-endpoint bInterval on ndo_open() in case a device lacks
the expected endpoints.

Fixes: 40a82917b1d3 ("net/usb/r8152: enable interrupt transfer")
Cc: hayeswang 
Signed-off-by: Johan Hovold 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net/wan/fsl_ucc_hdlc: fix out of bounds write on array utdm_info

2020-01-23T07:21:35+00:00

[ Upstream commit ddf420390526ede3b9ff559ac89f58cb59d9db2f ]

Array utdm_info is declared as an array of MAX_HDLC_NUM (4) elements
however up to UCC_MAX_NUM (8) elements are potentially being written
to it.  Currently we have an array out-of-bounds write error on the
last 4 elements. Fix this by making utdm_info UCC_MAX_NUM elements in
size.

Addresses-Coverity: ("Out-of-bounds write")
Fixes: c19b6d246a35 ("drivers/net: support hdlc function for QE-UCC")
Signed-off-by: Colin Ian King 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: usb: lan78xx: limit size of local TSO packets

2020-01-23T07:21:35+00:00

[ Upstream commit f8d7408a4d7f60f8b2df0f81decdc882dd9c20dc ]

lan78xx_tx_bh() makes sure to not exceed MAX_SINGLE_PACKET_SIZE
bytes in the aggregated packets it builds, but does
nothing to prevent large GSO packets being submitted.

Pierre-Francois reported various hangs when/if TSO is enabled.

For localy generated packets, we can use netif_set_gso_max_size()
to limit the size of TSO packets.

Note that forwarded packets could still hit the issue,
so a complete fix might require implementing .ndo_features_check
for this driver, forcing a software segmentation if the size
of the TSO packet exceeds MAX_SINGLE_PACKET_SIZE.

Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver")
Signed-off-by: Eric Dumazet 
Reported-by: RENARD Pierre-Francois 
Tested-by: RENARD Pierre-Francois 
Cc: Stefan Wahren 
Cc: Woojung Huh 
Cc: Microchip Linux Driver Support 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: hns: fix soft lockup when there is not enough memory

2020-01-23T07:21:35+00:00

[ Upstream commit 49edd6a2c456150870ddcef5b7ed11b21d849e13 ]

When there is not enough memory and napi_alloc_skb() return NULL,
the HNS driver will print error message, and than try again, if
the memory is not enough for a while, huge error message and the
retry operation will cause soft lockup.

When napi_alloc_skb() return NULL because of no memory, we can
get a warn_alloc() call trace, so this patch deletes the error
message. We already use polling mode to handle irq, but the
retry operation will render the polling weight inactive, this
patch just return budget when the rx is not completed to avoid
dead loop.

Fixes: 36eedfde1a36 ("net: hns: Optimize hns_nic_common_poll for better performance")
Fixes: b5996f11ea54 ("net: add Hisilicon Network Subsystem basic ethernet support")
Signed-off-by: Yonglong Liu 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

hv_netvsc: Fix memory leak when removing rndis device

2020-01-23T07:21:34+00:00

[ Upstream commit 536dc5df2808efbefc5acee334d3c4f701790ec0 ]

kmemleak detects the following memory leak when hot removing
a network device:

unreferenced object 0xffff888083f63600 (size 256):
  comm "kworker/0:1", pid 12, jiffies 4294831717 (age 1113.676s)
  hex dump (first 32 bytes):
    00 40 c7 33 80 88 ff ff 00 00 00 00 10 00 00 00  .@.3............
    00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00  .....N..........
  backtrace:
    [<00000000d4a8f5be>] rndis_filter_device_add+0x117/0x11c0 [hv_netvsc]
    [<000000009c02d75b>] netvsc_probe+0x5e7/0xbf0 [hv_netvsc]
    [<00000000ddafce23>] vmbus_probe+0x74/0x170 [hv_vmbus]
    [<00000000046e64f1>] really_probe+0x22f/0xb50
    [<000000005cc35eb7>] driver_probe_device+0x25e/0x370
    [<0000000043c642b2>] bus_for_each_drv+0x11f/0x1b0
    [<000000005e3d09f0>] __device_attach+0x1c6/0x2f0
    [<00000000a72c362f>] bus_probe_device+0x1a6/0x260
    [<0000000008478399>] device_add+0x10a3/0x18e0
    [<00000000cf07b48c>] vmbus_device_register+0xe7/0x1e0 [hv_vmbus]
    [<00000000d46cf032>] vmbus_add_channel_work+0x8ab/0x1770 [hv_vmbus]
    [<000000002c94bb64>] process_one_work+0x919/0x17d0
    [<0000000096de6781>] worker_thread+0x87/0xb40
    [<00000000fbe7397e>] kthread+0x333/0x3f0
    [<000000004f844269>] ret_from_fork+0x3a/0x50

rndis_filter_device_add() allocates an instance of struct rndis_device
which never gets deallocated as rndis_filter_device_remove() sets
net_device->extension which points to the rndis_device struct to NULL,
leaving the rndis_device dangling.

Since net_device->extension is eventually freed in free_netvsc_device(),
we refrain from setting it to NULL inside rndis_filter_device_remove()

Signed-off-by: Mohammed Gamal 
Reviewed-by: Haiyang Zhang 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

macvlan: use skb_reset_mac_header() in macvlan_queue_xmit()

2020-01-23T07:21:34+00:00

[ Upstream commit 1712b2fff8c682d145c7889d2290696647d82dab ]

I missed the fact that macvlan_broadcast() can be used both
in RX and TX.

skb_eth_hdr() makes only sense in TX paths, so we can not
use it blindly in macvlan_broadcast()

Fixes: 96cc4b69581d ("macvlan: do not assume mac_header is set in macvlan_broadcast()")
Signed-off-by: Eric Dumazet 
Reported-by: Jurgen Van Ham 
Tested-by: Matteo Croce 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin