linux-stable.git/drivers/net, branch v3.4.104

ibmveth: Fix endian issues with rx_no_buffer statistic

2014-09-25T03:49:09+00:00

commit cbd5228199d8be45d895d9d0cc2b8ce53835fc21 upstream.

Hidden away in the last 8 bytes of the buffer_list page is a solitary
statistic. It needs to be byte swapped or else ethtool -S will
produce numbers that terrify the user.

Since we do this in multiple places, create a helper function with a
comment explaining what is going on.

Signed-off-by: Anton Blanchard 
Signed-off-by: David S. Miller 
Signed-off-by: Zefan Li

macvlan: Initialize vlan_features to turn on offload support.

2014-08-14T00:42:36+00:00

[ Upstream commit 081e83a78db9b0ae1f5eabc2dedecc865f509b98 ]

Macvlan devices do not initialize vlan_features.  As a result,
any vlan devices configured on top of macvlans perform very poorly.
Initialize vlan_features based on the vlan features of the lower-level
device.

Signed-off-by: Vlad Yasevich 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

inetpeer: get rid of ip_id_count

2014-08-14T00:42:35+00:00

[ Upstream commit 73f156a6e8c1074ac6327e0abd1169e95eb66463 ]

Ideally, we would need to generate IP ID using a per destination IP
generator.

linux kernels used inet_peer cache for this purpose, but this had a huge
cost on servers disabling MTU discovery.

1) each inet_peer struct consumes 192 bytes

2) inetpeer cache uses a binary tree of inet_peer structs,
   with a nominal size of ~66000 elements under load.

3) lookups in this tree are hitting a lot of cache lines, as tree depth
   is about 20.

4) If server deals with many tcp flows, we have a high probability of
   not finding the inet_peer, allocating a fresh one, inserting it in
   the tree with same initial ip_id_count, (cf secure_ip_id())

5) We garbage collect inet_peer aggressively.

IP ID generation do not have to be 'perfect'

Goal is trying to avoid duplicates in a short period of time,
so that reassembly units have a chance to complete reassembly of
fragments belonging to one message before receiving other fragments
with a recycled ID.

We simply use an array of generators, and a Jenkin hash using the dst IP
as a key.

ipv6_select_ident() is put back into net/ipv6/ip6_output.c where it
belongs (it is only used from this file)

secure_ip_id() and secure_ipv6_id() no longer are needed.

Rename ip_select_ident_more() to ip_select_ident_segs() to avoid
unnecessary decrement/increment of the number of segments.

Signed-off-by: Eric Dumazet 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

mwifiex: fix Tx timeout issue

2014-07-28T14:06:46+00:00

commit d76744a93246eccdca1106037e8ee29debf48277 upstream.

https://bugzilla.kernel.org/show_bug.cgi?id=70191
https://bugzilla.kernel.org/show_bug.cgi?id=77581

It is observed that sometimes Tx packet is downloaded without
adding driver's txpd header. This results in firmware parsing
garbage data as packet length. Sometimes firmware is unable
to read the packet if length comes out as invalid. This stops
further traffic and timeout occurs.

The root cause is uninitialized fields in tx_info(skb->cb) of
packet used to get garbage values. In this case if
MWIFIEX_BUF_FLAG_REQUEUED_PKT flag is mistakenly set, txpd
header was skipped. This patch makes sure that tx_info is
correctly initialized to fix the problem.

Reported-by: Andrew Wiley 
Reported-by: Linus Gasser 
Reported-by: Michael Hirsch 
Tested-by: Xinming Hu 
Signed-off-by: Amitkumar Karwar 
Signed-off-by: Maithili Hinge 
Signed-off-by: Avinash Patil 
Signed-off-by: Bing Zhao 
Signed-off-by: John W. Linville 
Signed-off-by: Greg Kroah-Hartman

sunvnet: clean up objects created in vnet_new() on vnet_exit()

2014-07-28T14:06:45+00:00

[ Upstream commit a4b70a07ed12a71131cab7adce2ce91c71b37060 ]

Nothing cleans up the objects created by
vnet_new(), they are completely leaked.

vnet_exit(), after doing the vio_unregister_driver() to clean
up ports, should call a helper function that iterates over vnet_list
and cleans up those objects. This includes unregister_netdevice()
as well as free_netdev().

Signed-off-by: Sowmini Varadhan 
Acked-by: Dave Kleikamp 
Reviewed-by: Karl Volz 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: pppoe: use correct channel MTU when using Multilink PPP

2014-07-28T14:06:45+00:00

[ Upstream commit a8a3e41c67d24eb12f9ab9680cbb85e24fcd9711 ]

The PPP channel MTU is used with Multilink PPP when ppp_mp_explode() (see
ppp_generic module) tries to determine how big a fragment might be. According
to RFC 1661, the MTU excludes the 2-byte PPP protocol field, see the
corresponding comment and code in ppp_mp_explode():

		/*
		 * hdrlen includes the 2-byte PPP protocol field, but the
		 * MTU counts only the payload excluding the protocol field.
		 * (RFC1661 Section 2)
		 */
		mtu = pch->chan->mtu - (hdrlen - 2);

However, the pppoe module *does* include the PPP protocol field in the channel
MTU, which is wrong as it causes the PPP payload to be 1-2 bytes too big under
certain circumstances (one byte if PPP protocol compression is used, two
otherwise), causing the generated Ethernet packets to be dropped. So the pppoe
module has to subtract two bytes from the channel MTU. This error only
manifests itself when using Multilink PPP, as otherwise the channel MTU is not
used anywhere.

In the following, I will describe how to reproduce this bug. We configure two
pppd instances for multilink PPP over two PPPoE links, say eth2 and eth3, with
a MTU of 1492 bytes for each link and a MRRU of 2976 bytes. (This MRRU is
computed by adding the two link MTUs and subtracting the MP header twice, which
is 4 bytes long.) The necessary pppd statements on both sides are "multilink
mtu 1492 mru 1492 mrru 2976". On the client side, we additionally need "plugin
rp-pppoe.so eth2" and "plugin rp-pppoe.so eth3", respectively; on the server
side, we additionally need to start two pppoe-server instances to be able to
establish two PPPoE sessions, one over eth2 and one over eth3. We set the MTU
of the PPP network interface to the MRRU (2976) on both sides of the connection
in order to make use of the higher bandwidth. (If we didn't do that, IP
fragmentation would kick in, which we want to avoid.)

Now we send a ICMPv4 echo request with a payload of 2948 bytes from client to
server over the PPP link. This results in the following network packet:

   2948 (echo payload)
 +    8 (ICMPv4 header)
 +   20 (IPv4 header)
---------------------
   2976 (PPP payload)

These 2976 bytes do not exceed the MTU of the PPP network interface, so the
IP packet is not fragmented. Now the multilink PPP code in ppp_mp_explode()
prepends one protocol byte (0x21 for IPv4), making the packet one byte bigger
than the negotiated MRRU. So this packet would have to be divided in three
fragments. But this does not happen as each link MTU is assumed to be two bytes
larger. So this packet is diveded into two fragments only, one of size 1489 and
one of size 1488. Now we have for that bigger fragment:

   1489 (PPP payload)
 +    4 (MP header)
 +    2 (PPP protocol field for the MP payload (0x3d))
 +    6 (PPPoE header)
--------------------------
   1501 (Ethernet payload)

This packet exceeds the link MTU and is discarded.

If one configures the link MTU on the client side to 1501, one can see the
discarded Ethernet frames with tcpdump running on the client. A

ping -s 2948 -c 1 192.168.15.254

leads to the smaller fragment that is correctly received on the server side:

(tcpdump -vvvne -i eth3 pppoes and ppp proto 0x3d)
52:54:00:ad:87:fd > 52:54:00:79:5c:d0, ethertype PPPoE S (0x8864),
  length 1514: PPPoE  [ses 0x3] MLPPP (0x003d), length 1494: seq 0x000,
  Flags [end], length 1492

and to the bigger fragment that is not received on the server side:

(tcpdump -vvvne -i eth2 pppoes and ppp proto 0x3d)
52:54:00:70:9e:89 > 52:54:00:5d:6f:b0, ethertype PPPoE S (0x8864),
  length 1515: PPPoE  [ses 0x5] MLPPP (0x003d), length 1495: seq 0x000,
  Flags [begin], length 1493

With the patch below, we correctly obtain three fragments:

52:54:00:ad:87:fd > 52:54:00:79:5c:d0, ethertype PPPoE S (0x8864),
  length 1514: PPPoE  [ses 0x1] MLPPP (0x003d), length 1494: seq 0x000,
  Flags [begin], length 1492
52:54:00:70:9e:89 > 52:54:00:5d:6f:b0, ethertype PPPoE S (0x8864),
  length 1514: PPPoE  [ses 0x1] MLPPP (0x003d), length 1494: seq 0x000,
  Flags [none], length 1492
52:54:00:ad:87:fd > 52:54:00:79:5c:d0, ethertype PPPoE S (0x8864),
  length 27: PPPoE  [ses 0x1] MLPPP (0x003d), length 7: seq 0x000,
  Flags [end], length 5

And the ICMPv4 echo request is successfully received at the server side:

IP (tos 0x0, ttl 64, id 21925, offset 0, flags [DF], proto ICMP (1),
  length 2976)
    192.168.222.2 > 192.168.15.254: ICMP echo request, id 30530, seq 0,
      length 2956

The bug was introduced in commit c9aa6895371b2a257401f59d3393c9f7ac5a8698
("[PPPOE]: Advertise PPPoE MTU") from the very beginning. This patch applies
to 3.10 upwards but the fix can be applied (with minor modifications) to
kernels as old as 2.6.32.

Signed-off-by: Christoph Schulz 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

be2net: set EQ DB clear-intr bit in be_open()

2014-07-28T14:06:45+00:00

[ Upstream commit 4cad9f3b61c7268fa89ab8096e23202300399b5d ]

On BE3, if the clear-interrupt bit of the EQ doorbell is not set the first
time it is armed, ocassionally we have observed that the EQ doesn't raise
anymore interrupts even if it is in armed state.
This patch fixes this by setting the clear-interrupt bit when EQs are
armed for the first time in be_open().

Signed-off-by: Suresh Reddy 
Signed-off-by: Sathya Perla 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

b43: fix frequency reported on G-PHY with /new/ firmware

2014-07-09T17:51:20+00:00

commit 2fc68eb122c7ea6cd5be1fe7d6650c0beb2f4f40 upstream.

Support for firmware rev 508+ was added years ago, but we never noticed
it reports channel in a different way for G-PHY devices. Instead of
offset from 2400 MHz it simply passes channel id (AKA hw_value).

So far it was (most probably) affecting monitor mode users only, but
the following recent commit made it noticeable for quite everybody:

commit 3afc2167f60a327a2c1e1e2600ef209a3c2b75b7
Author: Emmanuel Grumbach 
Date:   Tue Mar 4 16:50:13 2014 +0200

    cfg80211/mac80211: ignore signal if the frame was heard on wrong channel

Reported-by: Aaro Koskinen 
Signed-off-by: Rafał Miłecki 
Tested-by: Aaro Koskinen 
Signed-off-by: John W. Linville 
Signed-off-by: Greg Kroah-Hartman

rt2x00: fix rfkill regression on rt2500pci

2014-07-09T17:51:20+00:00

commit 616a8394b5df8c88f4dd416f4527439a4e365034 upstream.

As reported by Niels, starting rfkill polling during device probe
(commit e2bc7c5, generally sane change) broke rfkill on rt2500pci
device. I considered that bug as some initalization issue, which
should be fixed on rt2500pci specific code. But after several
attempts (see bug report for details) we fail to find working solution.
Hence I decided to revert to old behaviour on rt2500pci to fix
regression.

Additionally patch also unregister rfkill on device remove instead
of ifconfig down, what was another issue introduced by bad commit.

Bug report:
https://bugzilla.kernel.org/show_bug.cgi?id=73821

Fixes: e2bc7c5f3cb8 ("rt2x00: Fix rfkill_polling register function.")
Bisected-by: Niels 
Reported-and-tested-by: Niels 
Signed-off-by: Stanislaw Gruszka 
Signed-off-by: John W. Linville 
Signed-off-by: Greg Kroah-Hartman

rt2x00: disable TKIP on USB

2014-07-09T17:51:20+00:00

commit 8edcb0ba0d56f5914eef11eda6db8bfe74eb9ca8 upstream.

On USB we can not get atomically TKIP key. We have to disable support
for TKIP acceleration on USB hardware to avoid bug as showed bellow.

[  860.827243] BUG: scheduling while atomic: hostapd/3397/0x00000002

[  860.827280] Call Trace:
[  860.827282]  [] dump_stack+0x4d/0x66
[  860.827284]  [] __schedule_bug+0x47/0x55
[  860.827285]  [] __schedule+0x733/0x7b0
[  860.827287]  [] schedule+0x29/0x70
[  860.827289]  [] schedule_timeout+0x15a/0x2b0
[  860.827291]  [] ? ftrace_raw_event_tick_stop+0xc0/0xc0
[  860.827294]  [] ? __module_text_address+0x12/0x70
[  860.827296]  [] wait_for_completion_timeout+0xb3/0x140
[  860.827298]  [] ? wake_up_state+0x20/0x20
[  860.827301]  [] usb_start_wait_urb+0x7d/0x150
[  860.827303]  [] usb_control_msg+0xc5/0x110
[  860.827305]  [] rt2x00usb_vendor_request+0xc6/0x160  [rt2x00usb]
[  860.827307]  [] rt2x00usb_vendor_req_buff_lock+0x75/0x150 [rt2x00usb]
[  860.827309]  [] rt2x00usb_vendor_request_buff+0xa3/0xe0 [rt2x00usb]
[  860.827311]  [] rt2x00usb_register_multiread+0x33/0x40 [rt2800usb]
[  860.827314]  [] rt2800_get_tkip_seq+0x39/0x50  [rt2800lib]
[  860.827321]  [] ieee80211_get_key+0x218/0x2a0  [mac80211]
[  860.827322]  [] ? __nlmsg_put+0x6c/0x80
[  860.827329]  [] nl80211_get_key+0x22e/0x360 [cfg80211]

Reported-and-tested-by: Peter Wu 
Reported-and-tested-by: Pontus Fuchs 
Signed-off-by: Stanislaw Gruszka 
Signed-off-by: John W. Linville 
Signed-off-by: Greg Kroah-Hartman