linux-stable.git/drivers/net, branch v3.3.2 Linux kernel stable tree Revert "ath9k: fix going to full-sleep on PS idle" 2012-04-13T16:13:57+00:00 Sujith Manoharan c_manoha@qca.qualcomm.com 2012-04-10T06:56:11+00:00 2ed63a49ab039d590f7f9fef63706d83805079c6 commit 011afa1ed8c408d694957d2474d89dc81a60b70c upstream. This reverts commit c1afdaff90538ef085b756454f12b29575411214. Users have reported connection failures in 3.3.1 and suspend/resume failures in 3.4-rcX. Revert this commit for now - PS IDLE can be fixed in a clean manner later on. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 011afa1ed8c408d694957d2474d89dc81a60b70c upstream.

This reverts commit c1afdaff90538ef085b756454f12b29575411214.

Users have reported connection failures in 3.3.1 and suspend/resume
failures in 3.4-rcX. Revert this commit for now - PS IDLE can be
fixed in a clean manner later on.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB: Add Motorola Rokr E6 Id to the USBNet driver "zaurus" 2012-04-13T16:13:56+00:00 Guan Xin guanx.bac@gmail.com 2012-03-26T04:11:46+00:00 6e8a4b90444918039d29d411087a76a6ef6d0893 commit a2daf263107ba3eb6db33931881731fa51c95045 upstream. Added Vendor/Device Id of Motorola Rokr E6 (22b8:6027) so it can be recognized by the "zaurus" USBNet driver. Applies to Linux 3.2.13 and 2.6.39.4. Signed-off-by: Guan Xin <guanx.bac@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit a2daf263107ba3eb6db33931881731fa51c95045 upstream.

Added Vendor/Device Id of Motorola Rokr E6 (22b8:6027) so it can be
recognized by the "zaurus" USBNet driver.
Applies to Linux 3.2.13 and 2.6.39.4.
Signed-off-by: Guan Xin <guanx.bac@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
iwlegacy: do not nulify il->vif on reset 2012-04-13T16:13:56+00:00 Stanislaw Gruszka sgruszka@redhat.com 2012-03-13T15:11:27+00:00 def81951735b03781b5e775a3f95c8fadf1a9b4b commit 883a649b737cdbe3ede7e50f3f939fd706ed5c4e upstream. This il->vif is dereferenced in different part of iwlegacy code, so do not nullify it. This should fix random crashes observed in companion with microcode errors i.e. crash in il3945_config_ap(). Additionally this should address also WARNING: at drivers/net/wireless/iwlegacy/common.c:4656 il_mac_remove_interface at least one of the possible reasons of that warning. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 883a649b737cdbe3ede7e50f3f939fd706ed5c4e upstream.

This il->vif is dereferenced in different part of iwlegacy code, so do
not nullify it. This should fix random crashes observed in companion
with microcode errors i.e. crash in il3945_config_ap().

Additionally this should address also
WARNING: at drivers/net/wireless/iwlegacy/common.c:4656 il_mac_remove_interface
at least one of the possible reasons of that warning.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ath9k: fix max noise floor threshold 2012-04-13T16:13:52+00:00 Rajkumar Manoharan rmanohar@qca.qualcomm.com 2012-03-15T00:38:04+00:00 90f1820ee60b216248ba35f3c447349bede2a4d7 commit 2ee0a07028d2cde6e131b73f029dae2b93c50f3a upstream. Currently the maximum noise floor limit is set as too high (-60dB). The assumption of having a higher threshold limit is that it would help de-sensitize the receiver (reduce phy errors) from continuous interference. But when we have a bursty interference where there are collisions and then free air time and if the receiver is desensitized too much, it will miss the normal packets too. Lets make use of chips specific min, nom and max limits always. This patch helps to improve the connection stability in congested networks. Cc: Paul Stewart <pstew@google.com> Tested-by: Gary Morain <gmorain@google.com> Signed-off-by: Madhan Jaganathan <madhanj@qca.qualcomm.com> Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 2ee0a07028d2cde6e131b73f029dae2b93c50f3a upstream.

Currently the maximum noise floor limit is set as too high (-60dB). The
assumption of having a higher threshold limit is that it would help
de-sensitize the receiver (reduce phy errors) from continuous
interference. But when we have a bursty interference where there are
collisions and then free air time and if the receiver is desensitized too
much, it will miss the normal packets too. Lets make use of chips
specific min, nom and max limits always. This patch helps to improve the
connection stability in congested networks.

Cc: Paul Stewart <pstew@google.com>
Tested-by: Gary Morain <gmorain@google.com>
Signed-off-by: Madhan Jaganathan <madhanj@qca.qualcomm.com>
Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rtlwifi: rtl8192ce: rtl8192cu: rtl8192de: Fix low-gain setting when scanning 2012-04-13T16:13:52+00:00 Larry Finger Larry.Finger@lwfinger.net 2012-03-26T14:59:48+00:00 eb641120479de7ee703fabb5e6ee0ec7947474ba commit 643c61e119459e9d750087b7b34be94491efebf9 upstream. In https://bugzilla.redhat.com/show_bug.cgi?id=770207, slowdowns of driver rtl8192ce are reported. One fix (commit a9b89e2) has already been applied, and it helped, but the maximum RX speed would still drop to 1 Mbps. As in the previous fix, the initial gain was determined to be the problem; however, the problem arises from a setting of the gain when scans are started. Driver rtl8192de also has the same code structure - this one is fixed as well. Reported-and-Tested-by: Ivan Pesin <ivan.pesin@gmail.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 643c61e119459e9d750087b7b34be94491efebf9 upstream.

In https://bugzilla.redhat.com/show_bug.cgi?id=770207, slowdowns of driver
rtl8192ce are reported. One fix (commit a9b89e2) has already been applied,
and it helped, but the maximum RX speed would still drop to 1 Mbps. As in
the previous fix, the initial gain was determined to be the problem; however,
the problem arises from a setting of the gain when scans are started.

Driver rtl8192de also has the same code structure - this one is fixed as well.

Reported-and-Tested-by: Ivan Pesin <ivan.pesin@gmail.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix non TBI PHY access; a bad merge undid bug fix in a previous commit. 2012-04-13T16:13:50+00:00 Kenth Eriksson kenth.eriksson@transmode.com 2012-03-27T22:05:54+00:00 887192b45178fe51e125cb007a69cb3752b332e1 [ Upstream commit 464b57da56910c8737ede75ad820b9a7afc46b3e ] The merge done in commit b26e478f undid bug fix in commit c3e072f8 ("net: fsl_pq_mdio: fix non tbi phy access"), with the result that non TBI (e.g. MDIO) PHYs cannot be accessed. Signed-off-by: Kenth Eriksson <kenth.eriksson@transmode.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit 464b57da56910c8737ede75ad820b9a7afc46b3e ]

The merge done in commit b26e478f undid bug fix in commit c3e072f8
("net: fsl_pq_mdio: fix non tbi phy access"), with the result that non
TBI (e.g. MDIO) PHYs cannot be accessed.

Signed-off-by: Kenth Eriksson <kenth.eriksson@transmode.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
net: usb: cdc_eem: fix mtu 2012-04-13T16:13:50+00:00 Rabin Vincent rabin@rab.in 2012-03-29T07:15:15+00:00 5516666ab0db19cf6fba61ed15d5ee172917e918 [ Upstream commit 78fb72f7936c01d5b426c03a691eca082b03f2b9 ] Make CDC EEM recalculate the hard_mtu after adjusting the hard_header_len. Without this, usbnet adjusts the MTU down to 1494 bytes, and the host is unable to receive standard 1500-byte frames from the device. Tested with the Linux USB Ethernet gadget. Cc: Oliver Neukum <oliver@neukum.name> Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit 78fb72f7936c01d5b426c03a691eca082b03f2b9 ]

Make CDC EEM recalculate the hard_mtu after adjusting the
hard_header_len.

Without this, usbnet adjusts the MTU down to 1494 bytes, and the host is
unable to receive standard 1500-byte frames from the device.

Tested with the Linux USB Ethernet gadget.

Cc: Oliver Neukum <oliver@neukum.name>
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sky2: dont overwrite settings for PHY Quick link 2012-04-13T16:13:50+00:00 Lino Sanfilippo LinoSanfilippo@gmx.de 2012-03-30T07:28:59+00:00 c2a26a9d9dca0999963acfa78dd54e725b854385 [ Upstream commit 2240eb4ae3dc4acff20d1a8947c441c451513e37 ] This patch corrects a bug in function sky2_open() of the Marvell Yukon 2 driver in which the settings for PHY quick link are overwritten. Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Acked-by: Stephen Hemminger <shemminger@vyattta.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit 2240eb4ae3dc4acff20d1a8947c441c451513e37 ]

This patch corrects a bug in function sky2_open() of the Marvell Yukon 2 driver
in which the settings for PHY quick link are overwritten.

Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Acked-by: Stephen Hemminger <shemminger@vyattta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tg3: Fix 5717 serdes powerdown problem 2012-04-13T16:13:50+00:00 Matt Carlson mcarlson@broadcom.com 2012-04-02T09:01:40+00:00 5d755a70796b85c9bcf4d8c0fee1b5c8febbfe5c [ Upstream commit 085f1afc56619bda424941412fdeaff1e32c21dc ] If port 0 of a 5717 serdes device powers down, it hides the phy from port 1. This patch works around the problem by keeping port 0's phy powered up. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit 085f1afc56619bda424941412fdeaff1e32c21dc ]

If port 0 of a 5717 serdes device powers down, it hides the phy from
port 1.  This patch works around the problem by keeping port 0's phy
powered up.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
via-rhine: fix wait-bit inversion. 2012-04-13T16:13:50+00:00 Andreas Mohr andi@lisas.de 2012-04-01T12:35:00+00:00 e453806dd082976d3f1dc5ab51e171205cce28ff [ Upstream commit 3f8c91a7398b9266fbe7abcbe4bd5dffef907643 ] Bug appeared in a384a33bb1c9ec2d99db2046b41f57023fa7d77b ("via-rhine: RHINE_WAIT_FOR macro removal). It can be noticed during suspend/resume. Signed-off-by: Andreas Mohr <andi@lisas.de> Acked-by: Francois Romieu <romieu@fr.zoreil.com> Cc: David Lv <DavidLv@viatech.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
[ Upstream commit 3f8c91a7398b9266fbe7abcbe4bd5dffef907643 ]

Bug appeared in a384a33bb1c9ec2d99db2046b41f57023fa7d77b
("via-rhine: RHINE_WAIT_FOR macro removal). It can be noticed
during suspend/resume.

Signed-off-by: Andreas Mohr <andi@lisas.de>
Acked-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: David Lv <DavidLv@viatech.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>