linux-stable.git/drivers/net, branch v3.2.94

wlcore: fix 64K page support

2017-10-12T14:27:09+00:00

commit 4a4274bf2dbbd1c7a45be0c89a1687c9d2eef4a0 upstream.

In the stable linux-3.16 branch, I ran into a warning in the
wlcore driver:

drivers/net/wireless/ti/wlcore/spi.c: In function 'wl12xx_spi_raw_write':
drivers/net/wireless/ti/wlcore/spi.c:315:1: error: the frame size of 12848 bytes is larger than 2048 bytes [-Werror=frame-larger-than=]

Newer kernels no longer show the warning, but the bug is still there,
as the allocation is based on the CPU page size rather than the
actual capabilities of the hardware.

This replaces the PAGE_SIZE macro with the SZ_4K macro, i.e. 4096 bytes
per buffer.

Signed-off-by: Arnd Bergmann 
Signed-off-by: Kalle Valo 
[bwh: Backported to 3.2:
 - Open-code SZ_4K as it is only defined on some architectures here(!)
 - Adjust filename, context]
Signed-off-by: Ben Hutchings

mwifiex: fixup error cases in mwifiex_add_virtual_intf()

2017-10-12T14:27:08+00:00

commit 8535107aa4ef92520cbb9a4739563b389c5f8e2c upstream.

If we fail to add an interface in mwifiex_add_virtual_intf(), we might
hit a BUG_ON() in the networking code, because we didn't tear things
down properly. Among the problems:

 (a) when failing to allocate workqueues, we fail to unregister the
     netdev before calling free_netdev()
 (b) even if we do try to unregister the netdev, we're still holding the
     rtnl lock, so the device never properly unregistered; we'll be at
     state NETREG_UNREGISTERING, and then hit free_netdev()'s:
	BUG_ON(dev->reg_state != NETREG_UNREGISTERED);
 (c) we're allocating some dependent resources (e.g., DFS workqueues)
     after we've registered the interface; this may or may not cause
     problems, but it's good practice to allocate these before registering
 (d) we're not even trying to unwind anything when mwifiex_send_cmd() or
     mwifiex_sta_init_cmd() fail

To fix these issues, let's:

 * add a stacked set of error handling labels, to keep error handling
   consistent and properly ordered (resolving (a) and (d))
 * move the workqueue allocations before the registration (to resolve
   (c); also resolves (b) by avoiding error cases where we have to
   unregister)

[Incidentally, it's pretty easy to interrupt the alloc_workqueue() in,
e.g., the following:

  iw phy phy0 interface add mlan0 type station

by sending it SIGTERM.]

This bugfix covers commits like commit 7d652034d1a0 ("mwifiex: channel
switch support for mwifiex"), but parts of this bug exist all the way
back to the introduction of dynamic interface handling in commit
93a1df48d224 ("mwifiex: add cfg80211 handlers add/del_virtual_intf").

Signed-off-by: Brian Norris 
Signed-off-by: Kalle Valo 
[bwh: Backported to 3.2:
 - There is no workqueue allocation or cleanup needed here
 - Add 'ret' variable
 - Keep logging errors with wiphy_err()
 - Adjust filename]
Signed-off-by: Ben Hutchings

net: phy: marvell: Limit errata to 88m1101

2017-09-15T17:30:58+00:00

commit f2899788353c13891412b273fdff5f02d49aa40f upstream.

The 88m1101 has an errata when configuring autoneg. However, it was
being applied to many other Marvell PHYs as well. Limit its scope to
just the 88m1101.

Fixes: 76884679c644 ("phylib: Add support for Marvell 88e1111S and 88e1145")
Reported-by: Daniel Walker 
Signed-off-by: Andrew Lunn 
Acked-by: Harini Katakam 
Reviewed-by: Florian Fainelli 
Signed-off-by: David S. Miller 
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings

net: ethoc: enable NAPI before poll may be scheduled

2017-09-15T17:30:51+00:00

commit d220b942a4b6a0640aee78841608f4aa5e8e185e upstream.

ethoc_reset enables device interrupts, ethoc_interrupt may schedule a
NAPI poll before NAPI is enabled in the ethoc_open, which results in
device being unable to send or receive anything until it's closed and
reopened. In case the device is flooded with ingress packets it may be
unable to recover at all.
Move napi_enable above ethoc_reset in the ethoc_open to fix that.

Fixes: a1702857724f ("net: Add support for the OpenCores 10/100 Mbps Ethernet MAC.")
Signed-off-by: Max Filippov 
Reviewed-by: Tobias Klauser 
Reviewed-by: Florian Fainelli 
Signed-off-by: David S. Miller 
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings

net: phy: fix marvell phy status reading

2017-09-15T17:30:49+00:00

commit 898805e0cdf7fd860ec21bf661d3a0285a3defbd upstream.

The Marvell driver incorrectly provides phydev->lp_advertising as the
logical and of the link partner's advert and our advert.  This is
incorrect - this field is supposed to store the link parter's unmodified
advertisment.

This allows ethtool to report the correct link partner auto-negotiation
status.

Fixes: be937f1f89ca ("Marvell PHY m88e1111 driver fix")
Signed-off-by: Russell King 
Reviewed-by: Andrew Lunn 
Reviewed-by: Florian Fainelli 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

net: ethernet: ax88796: don't call free_irq without request_irq first

2017-09-15T17:30:48+00:00

commit 82533ad9a1ce3a7a6863849a552c2cc041b55e0d upstream.

The function ax_init_dev (which is called only from the driver's .probe
function) calls free_irq in the error path without having requested the
irq in the first place. So drop the free_irq call in the error path.

Fixes: 825a2ff1896e ("AX88796 network driver")
Signed-off-by: Uwe Kleine-König 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

net: irda: irda-usb: fix firmware name on big-endian hosts

2017-09-15T17:30:40+00:00

commit 75cf067953d5ee543b3bda90bbfcbee5e1f94ae8 upstream.

Add missing endianness conversion when using the USB device-descriptor
bcdDevice field to construct a firmware file name.

Fixes: 8ef80aef118e ("[IRDA]: irda-usb.c: STIR421x cleanups")
Cc: Nick Fedchik 
Signed-off-by: Johan Hovold 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

net: ethernet: ucc_geth: fix MEM_PART_MURAM mode

2017-08-26T01:14:04+00:00

commit 8b8642af15ed14b9a7a34d3401afbcc274533e13 upstream.

Since commit 5093bb965a163 ("powerpc/QE: switch to the cpm_muram
implementation"), muram area is not part of immrbar mapping anymore
so immrbar_virt_to_phys() is not usable anymore.

Fixes: 5093bb965a163 ("powerpc/QE: switch to the cpm_muram implementation")
Signed-off-by: Christophe Leroy 
Acked-by: David S. Miller 
Acked-by: Li Yang 
Signed-off-by: Scott Wood 
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings

ath9k_htc: fix NULL-deref at probe

2017-08-26T01:13:58+00:00

commit ebeb36670ecac36c179b5fb5d5c88ff03ba191ec upstream.

Make sure to check the number of endpoints to avoid dereferencing a
NULL-pointer or accessing memory beyond the endpoint array should a
malicious device lack the expected endpoints.

Fixes: 36bcce430657 ("ath9k_htc: Handle storage devices")
Signed-off-by: Johan Hovold 
Signed-off-by: Kalle Valo 
Signed-off-by: Ben Hutchings

zd1211rw: fix NULL-deref at probe

2017-08-26T01:13:57+00:00

commit ca260ece6a57dc7d751e0685f51fa2c55d851873 upstream.

Make sure to check the number of endpoints to avoid dereferencing a
NULL-pointer or accessing memory beyond the endpoint array should a
malicious device lack the expected endpoints.

Fixes: a1030e92c150 ("[PATCH] zd1211rw: Convert installer CDROM device into WLAN device")
Cc: Daniel Drake 
Signed-off-by: Johan Hovold 
Signed-off-by: Kalle Valo 
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings