linux-stable.git/drivers/net, branch v3.2.76

xen-netback: use RING_COPY_REQUEST() throughout

2016-01-22T21:40:06+00:00

commit 68a33bfd8403e4e22847165d149823a2e0e67c9c upstream.

Instead of open-coding memcpy()s and directly accessing Tx and Rx
requests, use the new RING_COPY_REQUEST() that ensures the local copy
is correct.

This is more than is strictly necessary for guest Rx requests since
only the id and gref fields are used and it is harmless if the
frontend modifies these.

This is part of XSA155.

Reviewed-by: Wei Liu 
Signed-off-by: David Vrabel 
Signed-off-by: Konrad Rzeszutek Wilk 
[bwh: Backported to 3.2:
 - s/queue/vif/g
 - Adjust context]
Signed-off-by: Ben Hutchings

xen-netback: don't use last request to determine minimum Tx credit

2016-01-22T21:40:06+00:00

commit 0f589967a73f1f30ab4ac4dd9ce0bb399b4d6357 upstream.

The last from guest transmitted request gives no indication about the
minimum amount of credit that the guest might need to send a packet
since the last packet might have been a small one.

Instead allow for the worst case 128 KiB packet.

This is part of XSA155.

CC: stable@vger.kernel.org
Reviewed-by: Wei Liu 
Signed-off-by: David Vrabel 
Signed-off-by: Konrad Rzeszutek Wilk 
[bwh: Backported to 3.2: s/queue/vif/g]
Signed-off-by: Ben Hutchings

sh_eth: fix TX buffer byte-swapping

2016-01-22T21:40:05+00:00

commit 3e2309937f1e5d538ff13da5fb8de41196927c61 upstream.

For the little-endian SH771x kernels the driver has to byte-swap the RX/TX
buffers,  however yet unset physcial address from the TX descriptor is used
to call sh_eth_soft_swap(). Use 'skb->data' instead...

Fixes: 31fcb99d9958 ("net: sh_eth: remove __flush_purge_region")
Signed-off-by: Sergei Shtylyov 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

ppp, slip: Validate VJ compression slot parameters completely

2015-12-30T02:26:04+00:00

commit 4ab42d78e37a294ac7bc56901d563c642e03c4ae upstream.

Currently slhc_init() treats out-of-range values of rslots and tslots
as equivalent to 0, except that if tslots is too large it will
dereference a null pointer (CVE-2015-7799).

Add a range-check at the top of the function and make it return an
ERR_PTR() on error instead of NULL.  Change the callers accordingly.

Compile-tested only.

Reported-by: 郭永刚 
References: http://article.gmane.org/gmane.comp.security.oss.general/17908
Signed-off-by: Ben Hutchings 
Signed-off-by: David S. Miller 
[bwh: Backported to 3.2: adjust indentation]

pptp: verify sockaddr_len in pptp_bind() and pptp_connect()

2015-12-30T02:26:03+00:00

[ Upstream commit 09ccfd238e5a0e670d8178cf50180ea81ae09ae1 ]

Reported-by: Dmitry Vyukov 
Signed-off-by: Cong Wang 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

sh_eth: fix kernel oops in skb_put()

2015-12-30T02:26:03+00:00

[ Upstream commit 248be83dcb3feb3f6332eb3d010a016402138484 ]

In a low memory situation the following kernel oops occurs:

Unable to handle kernel NULL pointer dereference at virtual address 00000050
pgd = 8490c000
[00000050] *pgd=4651e831, *pte=00000000, *ppte=00000000
Internal error: Oops: 17 [#1] PREEMPT ARM
Modules linked in:
CPU: 0    Not tainted  (3.4-at16 #9)
PC is at skb_put+0x10/0x98
LR is at sh_eth_poll+0x2c8/0xa10
pc : [<8035f780>]    lr : [<8028bf50>]    psr: 60000113
sp : 84eb1a90  ip : 84eb1ac8  fp : 84eb1ac4
r10: 0000003f  r9 : 000005ea  r8 : 00000000
r7 : 00000000  r6 : 940453b0  r5 : 00030000  r4 : 9381b180
r3 : 00000000  r2 : 00000000  r1 : 000005ea  r0 : 00000000
Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
Control: 10c53c7d  Table: 4248c059  DAC: 00000015
Process klogd (pid: 2046, stack limit = 0x84eb02e8)
[...]

This is  because netdev_alloc_skb() fails and 'mdp->rx_skbuff[entry]' is left
NULL but sh_eth_rx() later  uses it without checking.  Add such check...

Reported-by: Yasushi SHOJI 
Signed-off-by: Sergei Shtylyov 
Signed-off-by: David S. Miller 
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings

atl1c: Improve driver not to do order 4 GFP_ATOMIC allocation

2015-12-30T02:26:02+00:00

[ Upstream commit f2a3771ae8aca879c32336c76ad05a017629bae2 ]

atl1c driver is doing order-4 allocation with GFP_ATOMIC
priority. That often breaks  networking after resume. Switch to
GFP_KERNEL. Still not ideal, but should be significantly better.

atl1c_setup_ring_resources() is called from .open() function, and
already uses GFP_KERNEL, so this change is safe.

Signed-off-by: Pavel Machek 
Acked-by: Michal Hocko 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

wan/x25: Fix use-after-free in x25_asy_open_tty()

2015-12-30T02:25:59+00:00

commit ee9159ddce14bc1dec9435ae4e3bd3153e783706 upstream.

The N_X25 line discipline may access the previous line discipline's closed
and already-freed private data on open [1].

The tty->disc_data field _never_ refers to valid data on entry to the
line discipline's open() method. Rather, the ldisc is expected to
initialize that field for its own use for the lifetime of the instance
(ie. from open() to close() only).

[1]
    [  634.336761] ==================================================================
    [  634.338226] BUG: KASAN: use-after-free in x25_asy_open_tty+0x13d/0x490 at addr ffff8800a743efd0
    [  634.339558] Read of size 4 by task syzkaller_execu/8981
    [  634.340359] =============================================================================
    [  634.341598] BUG kmalloc-512 (Not tainted): kasan: bad access detected
    ...
    [  634.405018] Call Trace:
    [  634.405277] dump_stack (lib/dump_stack.c:52)
    [  634.405775] print_trailer (mm/slub.c:655)
    [  634.406361] object_err (mm/slub.c:662)
    [  634.406824] kasan_report_error (mm/kasan/report.c:138 mm/kasan/report.c:236)
    [  634.409581] __asan_report_load4_noabort (mm/kasan/report.c:279)
    [  634.411355] x25_asy_open_tty (drivers/net/wan/x25_asy.c:559 (discriminator 1))
    [  634.413997] tty_ldisc_open.isra.2 (drivers/tty/tty_ldisc.c:447)
    [  634.414549] tty_set_ldisc (drivers/tty/tty_ldisc.c:567)
    [  634.415057] tty_ioctl (drivers/tty/tty_io.c:2646 drivers/tty/tty_io.c:2879)
    [  634.423524] do_vfs_ioctl (fs/ioctl.c:43 fs/ioctl.c:607)
    [  634.427491] SyS_ioctl (fs/ioctl.c:622 fs/ioctl.c:613)
    [  634.427945] entry_SYSCALL_64_fastpath (arch/x86/entry/entry_64.S:188)

Reported-and-tested-by: Sasha Levin 
Signed-off-by: Peter Hurley 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

broadcom: fix PHY_ID_BCM5481 entry in the id table

2015-12-30T02:25:58+00:00

commit 3c25a860d17b7378822f35d8c9141db9507e3beb upstream.

Commit fcb26ec5b18d ("broadcom: move all PHY_ID's to header")
updated broadcom_tbl to use PHY_IDs, but incorrectly replaced 0x0143bca0
with PHY_ID_BCM5482 (making a duplicate entry, and completely omitting
the original). Fix that.

Fixes: fcb26ec5b18d ("broadcom: move all PHY_ID's to header")
Signed-off-by: Aaro Koskinen 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

can: sja1000: clear interrupts on start

2015-12-30T02:25:57+00:00

commit 7cecd9ab80f43972c056dc068338f7bcc407b71c upstream.

According to SJA1000 data sheet error-warning (EI) interrupt is not
cleared by setting the controller in to reset-mode.

Then if we have the following case:
- system is suspended (echo mem > /sys/power/state) and SJA1000 is left
  in operating state
- A bus error condition occurs which activates EI interrupt, system is
  still suspended which means EI interrupt will be not be handled nor
  cleared.

If the above two events occur, on resume there is no way to return the
SJA1000 to operating state, except to cycle power to it.

By simply reading the IR register on start we will clear any previous
conditions that could be present.

Signed-off-by: Mirza Krak 
Reported-by: Christian Magnusson 
Signed-off-by: Marc Kleine-Budde 
[bwh: Backported to 3.2: s/SJA1000_IR/REG_IR/]
Signed-off-by: Ben Hutchings