linux-stable.git/drivers/net, branch v3.2.75

ppp, slip: Validate VJ compression slot parameters completely

2015-12-30T02:26:04+00:00

commit 4ab42d78e37a294ac7bc56901d563c642e03c4ae upstream.

Currently slhc_init() treats out-of-range values of rslots and tslots
as equivalent to 0, except that if tslots is too large it will
dereference a null pointer (CVE-2015-7799).

Add a range-check at the top of the function and make it return an
ERR_PTR() on error instead of NULL.  Change the callers accordingly.

Compile-tested only.

Reported-by: 郭永刚 
References: http://article.gmane.org/gmane.comp.security.oss.general/17908
Signed-off-by: Ben Hutchings 
Signed-off-by: David S. Miller 
[bwh: Backported to 3.2: adjust indentation]

pptp: verify sockaddr_len in pptp_bind() and pptp_connect()

2015-12-30T02:26:03+00:00

[ Upstream commit 09ccfd238e5a0e670d8178cf50180ea81ae09ae1 ]

Reported-by: Dmitry Vyukov 
Signed-off-by: Cong Wang 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

sh_eth: fix kernel oops in skb_put()

2015-12-30T02:26:03+00:00

[ Upstream commit 248be83dcb3feb3f6332eb3d010a016402138484 ]

In a low memory situation the following kernel oops occurs:

Unable to handle kernel NULL pointer dereference at virtual address 00000050
pgd = 8490c000
[00000050] *pgd=4651e831, *pte=00000000, *ppte=00000000
Internal error: Oops: 17 [#1] PREEMPT ARM
Modules linked in:
CPU: 0    Not tainted  (3.4-at16 #9)
PC is at skb_put+0x10/0x98
LR is at sh_eth_poll+0x2c8/0xa10
pc : [<8035f780>]    lr : [<8028bf50>]    psr: 60000113
sp : 84eb1a90  ip : 84eb1ac8  fp : 84eb1ac4
r10: 0000003f  r9 : 000005ea  r8 : 00000000
r7 : 00000000  r6 : 940453b0  r5 : 00030000  r4 : 9381b180
r3 : 00000000  r2 : 00000000  r1 : 000005ea  r0 : 00000000
Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
Control: 10c53c7d  Table: 4248c059  DAC: 00000015
Process klogd (pid: 2046, stack limit = 0x84eb02e8)
[...]

This is  because netdev_alloc_skb() fails and 'mdp->rx_skbuff[entry]' is left
NULL but sh_eth_rx() later  uses it without checking.  Add such check...

Reported-by: Yasushi SHOJI 
Signed-off-by: Sergei Shtylyov 
Signed-off-by: David S. Miller 
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings

atl1c: Improve driver not to do order 4 GFP_ATOMIC allocation

2015-12-30T02:26:02+00:00

[ Upstream commit f2a3771ae8aca879c32336c76ad05a017629bae2 ]

atl1c driver is doing order-4 allocation with GFP_ATOMIC
priority. That often breaks  networking after resume. Switch to
GFP_KERNEL. Still not ideal, but should be significantly better.

atl1c_setup_ring_resources() is called from .open() function, and
already uses GFP_KERNEL, so this change is safe.

Signed-off-by: Pavel Machek 
Acked-by: Michal Hocko 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

wan/x25: Fix use-after-free in x25_asy_open_tty()

2015-12-30T02:25:59+00:00

commit ee9159ddce14bc1dec9435ae4e3bd3153e783706 upstream.

The N_X25 line discipline may access the previous line discipline's closed
and already-freed private data on open [1].

The tty->disc_data field _never_ refers to valid data on entry to the
line discipline's open() method. Rather, the ldisc is expected to
initialize that field for its own use for the lifetime of the instance
(ie. from open() to close() only).

[1]
    [  634.336761] ==================================================================
    [  634.338226] BUG: KASAN: use-after-free in x25_asy_open_tty+0x13d/0x490 at addr ffff8800a743efd0
    [  634.339558] Read of size 4 by task syzkaller_execu/8981
    [  634.340359] =============================================================================
    [  634.341598] BUG kmalloc-512 (Not tainted): kasan: bad access detected
    ...
    [  634.405018] Call Trace:
    [  634.405277] dump_stack (lib/dump_stack.c:52)
    [  634.405775] print_trailer (mm/slub.c:655)
    [  634.406361] object_err (mm/slub.c:662)
    [  634.406824] kasan_report_error (mm/kasan/report.c:138 mm/kasan/report.c:236)
    [  634.409581] __asan_report_load4_noabort (mm/kasan/report.c:279)
    [  634.411355] x25_asy_open_tty (drivers/net/wan/x25_asy.c:559 (discriminator 1))
    [  634.413997] tty_ldisc_open.isra.2 (drivers/tty/tty_ldisc.c:447)
    [  634.414549] tty_set_ldisc (drivers/tty/tty_ldisc.c:567)
    [  634.415057] tty_ioctl (drivers/tty/tty_io.c:2646 drivers/tty/tty_io.c:2879)
    [  634.423524] do_vfs_ioctl (fs/ioctl.c:43 fs/ioctl.c:607)
    [  634.427491] SyS_ioctl (fs/ioctl.c:622 fs/ioctl.c:613)
    [  634.427945] entry_SYSCALL_64_fastpath (arch/x86/entry/entry_64.S:188)

Reported-and-tested-by: Sasha Levin 
Signed-off-by: Peter Hurley 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

broadcom: fix PHY_ID_BCM5481 entry in the id table

2015-12-30T02:25:58+00:00

commit 3c25a860d17b7378822f35d8c9141db9507e3beb upstream.

Commit fcb26ec5b18d ("broadcom: move all PHY_ID's to header")
updated broadcom_tbl to use PHY_IDs, but incorrectly replaced 0x0143bca0
with PHY_ID_BCM5482 (making a duplicate entry, and completely omitting
the original). Fix that.

Fixes: fcb26ec5b18d ("broadcom: move all PHY_ID's to header")
Signed-off-by: Aaro Koskinen 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

can: sja1000: clear interrupts on start

2015-12-30T02:25:57+00:00

commit 7cecd9ab80f43972c056dc068338f7bcc407b71c upstream.

According to SJA1000 data sheet error-warning (EI) interrupt is not
cleared by setting the controller in to reset-mode.

Then if we have the following case:
- system is suspended (echo mem > /sys/power/state) and SJA1000 is left
  in operating state
- A bus error condition occurs which activates EI interrupt, system is
  still suspended which means EI interrupt will be not be handled nor
  cleared.

If the above two events occur, on resume there is no way to return the
SJA1000 to operating state, except to cycle power to it.

By simply reading the IR register on start we will clear any previous
conditions that could be present.

Signed-off-by: Mirza Krak 
Reported-by: Christian Magnusson 
Signed-off-by: Marc Kleine-Budde 
[bwh: Backported to 3.2: s/SJA1000_IR/REG_IR/]
Signed-off-by: Ben Hutchings

macvlan: fix leak in macvlan_handle_frame

2015-12-30T02:25:56+00:00

commit e639b8d8a7a728f0b05ef2df6cb6b45dc3d4e556 upstream.

Reset pskb in macvlan_handle_frame in case skb_share_check returned a
clone.

Fixes: 8a4eb5734e8d ("net: introduce rx_handler results and logic around that")
Signed-off-by: Sabrina Dubroca 
Signed-off-by: David S. Miller 
Signed-off-by: Ben Hutchings

can: Use correct type in sizeof() in nla_put()

2015-11-27T12:48:22+00:00

commit 562b103a21974c2f9cd67514d110f918bb3e1796 upstream.

The sizeof() is invoked on an incorrect variable, likely due to some
copy-paste error, and this might result in memory corruption. Fix this.

Signed-off-by: Marek Vasut 
Cc: Wolfgang Grandegger 
Cc: netdev@vger.kernel.org
Signed-off-by: Marc Kleine-Budde 
[bwh: Backported to 3.2:
 - Keep using the old NLA_PUT macro
 - Adjust context]
Signed-off-by: Ben Hutchings

mwifiex: fix mwifiex_rdeeprom_read()

2015-11-27T12:48:19+00:00

commit 1f9c6e1bc1ba5f8a10fcd6e99d170954d7c6d382 upstream.

There were several bugs here.

1)  The done label was in the wrong place so we didn't copy any
    information out when there was no command given.

2)  We were using PAGE_SIZE as the size of the buffer instead of
    "PAGE_SIZE - pos".

3)  snprintf() returns the number of characters that would have been
    printed if there were enough space.  If there was not enough space
    (and we had fixed the memory corruption bug #2) then it would result
    in an information leak when we do simple_read_from_buffer().  I've
    changed it to use scnprintf() instead.

I also removed the initialization at the start of the function, because
I thought it made the code a little more clear.

Fixes: 5e6e3a92b9a4 ('wireless: mwifiex: initial commit for Marvell mwifiex driver')
Signed-off-by: Dan Carpenter 
Acked-by: Amitkumar Karwar 
Signed-off-by: Kalle Valo 
Signed-off-by: Ben Hutchings