linux-stable.git/drivers/net, branch v3.18.98

net: gianfar_ptp: move set_fipers() to spinlock protecting area

2018-03-03T09:17:11+00:00

[ Upstream commit 11d827a993a969c3c6ec56758ff63a44ba19b466 ]

set_fipers() calling should be protected by spinlock in
case that any interrupt breaks related registers setting
and the function we expect. This patch is to move set_fipers()
to spinlock protecting area in ptp_gianfar_adjtime().

Signed-off-by: Yangbo Lu 
Acked-by: Richard Cochran 
Reviewed-by: Fabio Estevam 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

mdio-sun4i: Fix a memory leak

2018-03-03T09:17:10+00:00

[ Upstream commit 56c0290202ab94a2f2780c449395d4ae8495fab4 ]

If the probing of the regulator is deferred, the memory allocated by
'mdiobus_alloc_size()' will be leaking.
It should be freed before the next call to 'sun4i_mdio_probe()' which will
reallocate it.

Fixes: 4bdcb1dd9feb ("net: Add MDIO bus driver for the Allwinner EMAC")
Signed-off-by: Christophe JAILLET 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

xen-netfront: enable device after manual module load

2018-03-03T09:17:10+00:00

[ Upstream commit b707fda2df4070785d0fa8a278aa13944c5f51f8 ]

When loading the module after unloading it, the network interface would
not be enabled and thus wouldn't have a backend counterpart and unable
to be used by the guest.

The guest would face errors like:

  [root@guest ~]# ethtool -i eth0
  Cannot get driver information: No such device

  [root@guest ~]# ifconfig eth0
  eth0: error fetching interface information: Device not found

This patch initializes the state of the netfront device whenever it is
loaded manually, this state would communicate the netback to create its
device and establish the connection between them.

Signed-off-by: Eduardo Otubo 
Reviewed-by: Boris Ostrovsky 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

e1000: fix disabling already-disabled warning

2018-03-03T09:17:10+00:00

[ Upstream commit 0b76aae741abb9d16d2c0e67f8b1e766576f897d ]

This patch adds check so that driver does not disable already
disabled device.

[   44.637743] advantechwdt: Unexpected close, not stopping watchdog!
[   44.997548] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input6
[   45.013419] e1000 0000:00:03.0: disabling already-disabled device
[   45.013447] ------------[ cut here ]------------
[   45.014868] WARNING: CPU: 1 PID: 71 at drivers/pci/pci.c:1641 pci_disable_device+0xa1/0x105:
						pci_disable_device at drivers/pci/pci.c:1640
[   45.016171] CPU: 1 PID: 71 Comm: rcu_perf_shutdo Not tainted 4.14.0-01330-g3c07399 #1
[   45.017197] task: ffff88011bee9e40 task.stack: ffffc90000860000
[   45.017987] RIP: 0010:pci_disable_device+0xa1/0x105:
						pci_disable_device at drivers/pci/pci.c:1640
[   45.018603] RSP: 0000:ffffc90000863e30 EFLAGS: 00010286
[   45.019282] RAX: 0000000000000035 RBX: ffff88013a230008 RCX: 0000000000000000
[   45.020182] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000203
[   45.021084] RBP: ffff88013a3f31e8 R08: 0000000000000001 R09: 0000000000000000
[   45.021986] R10: ffffffff827ec29c R11: 0000000000000002 R12: 0000000000000001
[   45.022946] R13: ffff88013a230008 R14: ffff880117802b20 R15: ffffc90000863e8f
[   45.023842] FS:  0000000000000000(0000) GS:ffff88013fd00000(0000) knlGS:0000000000000000
[   45.024863] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   45.025583] CR2: ffffc900006d4000 CR3: 000000000220f000 CR4: 00000000000006a0
[   45.026478] Call Trace:
[   45.026811]  __e1000_shutdown+0x1d4/0x1e2:
						__e1000_shutdown at drivers/net/ethernet/intel/e1000/e1000_main.c:5162
[   45.027344]  ? rcu_perf_cleanup+0x2a1/0x2a1:
						rcu_perf_shutdown at kernel/rcu/rcuperf.c:627
[   45.027883]  e1000_shutdown+0x14/0x3a:
						e1000_shutdown at drivers/net/ethernet/intel/e1000/e1000_main.c:5235
[   45.028351]  device_shutdown+0x110/0x1aa:
						device_shutdown at drivers/base/core.c:2807
[   45.028858]  kernel_power_off+0x31/0x64:
						kernel_power_off at kernel/reboot.c:260
[   45.029343]  rcu_perf_shutdown+0x9b/0xa7:
						rcu_perf_shutdown at kernel/rcu/rcuperf.c:637
[   45.029852]  ? __wake_up_common_lock+0xa2/0xa2:
						autoremove_wake_function at kernel/sched/wait.c:376
[   45.030414]  kthread+0x126/0x12e:
						kthread at kernel/kthread.c:233
[   45.030834]  ? __kthread_bind_mask+0x8e/0x8e:
						kthread at kernel/kthread.c:190
[   45.031399]  ? ret_from_fork+0x1f/0x30:
						ret_from_fork at arch/x86/entry/entry_64.S:443
[   45.031883]  ? kernel_init+0xa/0xf5:
						kernel_init at init/main.c:997
[   45.032325]  ret_from_fork+0x1f/0x30:
						ret_from_fork at arch/x86/entry/entry_64.S:443
[   45.032777] Code: 00 48 85 ed 75 07 48 8b ab a8 00 00 00 48 8d bb 98 00 00 00 e8 aa d1 11 00 48 89 ea 48 89 c6 48 c7 c7 d8 e4 0b 82 e8 55 7d da ff <0f> ff b9 01 00 00 00 31 d2 be 01 00 00 00 48 c7 c7 f0 b1 61 82
[   45.035222] ---[ end trace c257137b1b1976ef ]---
[   45.037838] ACPI: Preparing to enter system sleep state S5

Signed-off-by: Tushar Dave 
Tested-by: Fengguang Wu 
Signed-off-by: Jeff Kirsher 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

bnx2x: Improve reliability in case of nested PCI errors

2018-03-03T09:17:09+00:00

[ Upstream commit f7084059a9cb9e56a186e1677b1dcffd76c2cd24 ]

While in recovery process of PCI error (called EEH on PowerPC arch),
another PCI transaction could be corrupted causing a situation of
nested PCI errors. Also, this scenario could be reproduced with
error injection mechanisms (for debug purposes).

We observe that in case of nested PCI errors, bnx2x might attempt to
initialize its shmem and cause a kernel crash due to bad addresses
read from MCP. Multiple different stack traces were observed depending
on the point the second PCI error happens.

This patch avoids the crashes by:

 * failing PCI recovery in case of nested errors (since multiple
 PCI errors in a row are not expected to lead to a functional
 adapter anyway), and by,

 * preventing access to adapter FW when MCP is failed (we mark it as
 failed when shmem cannot get initialized properly).

Reported-by: Abdul Haleem 
Signed-off-by: Guilherme G. Piccoli 
Acked-by: Shahed Shaikh 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

tg3: Enable PHY reset in MTU change path for 5720

2018-03-03T09:17:09+00:00

[ Upstream commit e60ee41aaf898584205a6af5c996860d0fe6a836 ]

A customer noticed RX path hang when MTU is changed on the fly while
running heavy traffic with NCSI enabled for 5717 and 5719. Since 5720
belongs to same ASIC family, we observed same issue and same fix
could solve this problem for 5720.

Signed-off-by: Siva Reddy Kallam 
Signed-off-by: Michael Chan 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

tg3: Add workaround to restrict 5762 MRRS to 2048

2018-03-03T09:17:08+00:00

[ Upstream commit 4419bb1cedcda0272e1dc410345c5a1d1da0e367 ]

One of AMD based server with 5762 hangs with jumbo frame traffic.
This AMD platform has southbridge limitation which is restricting MRRS
to 4000. As a work around, driver to restricts the MRRS to 2048 for
this particular 5762 NX1 card.

Signed-off-by: Siva Reddy Kallam 
Signed-off-by: Michael Chan 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

net: arc_emac: fix arc_emac_rx() error paths

2018-03-03T09:17:08+00:00

[ Upstream commit e688822d035b494071ecbadcccbd6f3325fb0f59 ]

arc_emac_rx() has some issues found by code review.

In case netdev_alloc_skb_ip_align() or dma_map_single() failure
rx fifo entry will not be returned to EMAC.

In case dma_map_single() failure previously allocated skb became
lost to driver. At the same time address of newly allocated skb
will not be provided to EMAC.

Signed-off-by: Alexander Kochetkov 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

hippi: Fix a Fix a possible sleep-in-atomic bug in rr_close

2018-02-25T10:01:21+00:00

[ Upstream commit 6e266610eb6553cfb7e7eb5d11914bd01509c406 ]

The driver may sleep under a spinlock.
The function call path is:
rr_close (acquire the spinlock)
  free_irq --> may sleep

To fix it, free_irq is moved to the place without holding the spinlock.

This bug is found by my static analysis tool(DSAC) and checked by my code review.

Signed-off-by: Jia-Ju Bai 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

gianfar: fix a flooded alignment reports because of padding issue.

2018-02-25T10:01:20+00:00

[ Upstream commit 58117672943734715bbe7565ac9f062effa524f0 ]

According to LS1021A RM, the value of PAL can be set so that the start of the
IP header in the receive data buffer is aligned to a 32-bit boundary. Normally,
setting PAL = 2 provides minimal padding to ensure such alignment of the IP
header.

However every incoming packet's 8-byte time stamp will be inserted into the
packet data buffer as padding alignment bytes when hardware time stamping is
enabled.

So we set the padding 8+2 here to avoid the flooded alignment faults:

root@128:~# cat /proc/cpu/alignment
User:           0
System:         17539 (inet_gro_receive+0x114/0x2c0)
Skipped:        0
Half:           0
Word:           0
DWord:          0
Multi:          17539
User faults:    2 (fixup)

Also shown when exception report enablement

CPU: 0 PID: 161 Comm: irq/66-eth1_g0_ Not tainted 4.1.21-rt13-WR8.0.0.0_preempt-rt #16
Hardware name: Freescale LS1021A
[<8001b420>] (unwind_backtrace) from [<8001476c>] (show_stack+0x20/0x24)
[<8001476c>] (show_stack) from [<807cfb48>] (dump_stack+0x94/0xac)
[<807cfb48>] (dump_stack) from [<80025d70>] (do_alignment+0x720/0x958)
[<80025d70>] (do_alignment) from [<80009224>] (do_DataAbort+0x40/0xbc)
[<80009224>] (do_DataAbort) from [<80015398>] (__dabt_svc+0x38/0x60)
Exception stack(0x86ad1cc0 to 0x86ad1d08)
1cc0: f9b3e080 86b3d072 2d78d287 00000000 866816c0 86b3d05e 86e785d0 00000000
1ce0: 00000011 0000000e 80840ab0 86ad1d3c 86ad1d08 86ad1d08 806d7fc0 806d806c
1d00: 40070013 ffffffff
[<80015398>] (__dabt_svc) from [<806d806c>] (inet_gro_receive+0x114/0x2c0)
[<806d806c>] (inet_gro_receive) from [<80660eec>] (dev_gro_receive+0x21c/0x3c0)
[<80660eec>] (dev_gro_receive) from [<8066133c>] (napi_gro_receive+0x44/0x17c)
[<8066133c>] (napi_gro_receive) from [<804f0538>] (gfar_clean_rx_ring+0x39c/0x7d4)
[<804f0538>] (gfar_clean_rx_ring) from [<804f0bf4>] (gfar_poll_rx_sq+0x58/0xe0)
[<804f0bf4>] (gfar_poll_rx_sq) from [<80660b10>] (net_rx_action+0x27c/0x43c)
[<80660b10>] (net_rx_action) from [<80033638>] (do_current_softirqs+0x1e0/0x3dc)
[<80033638>] (do_current_softirqs) from [<800338c4>] (__local_bh_enable+0x90/0xa8)
[<800338c4>] (__local_bh_enable) from [<8008025c>] (irq_forced_thread_fn+0x70/0x84)
[<8008025c>] (irq_forced_thread_fn) from [<800805e8>] (irq_thread+0x16c/0x244)
[<800805e8>] (irq_thread) from [<8004e490>] (kthread+0xe8/0x104)
[<8004e490>] (kthread) from [<8000fda8>] (ret_from_fork+0x14/0x2c)

Signed-off-by: Zumeng Chen 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman