linux-stable.git/drivers/net, branch v3.18.78

brcmsmac: make some local variables 'static const' to reduce stack size

2017-10-27T08:17:23+00:00

commit c503dd38f850be28867ef7a42d9abe5ade81a9bd upstream.

With KASAN and a couple of other patches applied, this driver is one
of the few remaining ones that actually use more than 2048 bytes of
kernel stack:

broadcom/brcm80211/brcmsmac/phy/phy_n.c: In function 'wlc_phy_workarounds_nphy_gainctrl':
broadcom/brcm80211/brcmsmac/phy/phy_n.c:16065:1: warning: the frame size of 3264 bytes is larger than 2048 bytes [-Wframe-larger-than=]
broadcom/brcm80211/brcmsmac/phy/phy_n.c: In function 'wlc_phy_workarounds_nphy':
broadcom/brcm80211/brcmsmac/phy/phy_n.c:17138:1: warning: the frame size of 2864 bytes is larger than 2048 bytes [-Wframe-larger-than=]

Here, I'm reducing the stack size by marking as many local variables as
'static const' as I can without changing the actual code.

This is the first of three patches to improve the stack usage in this
driver. It would be good to have this backported to stabl kernels
to get all drivers in 'allmodconfig' below the 2048 byte limit so
we can turn on the frame warning again globally, but I realize that
the patch is larger than the normal limit for stable backports.

The other two patches do not need to be backported.

Acked-by: Arend van Spriel 
Signed-off-by: Arnd Bergmann 
Signed-off-by: Kalle Valo 
Signed-off-by: Greg Kroah-Hartman

can: esd_usb2: Fix can_dlc value for received RTR, frames

2017-10-27T08:17:23+00:00

commit 72d92e865d1560723e1957ee3f393688c49ca5bf upstream.

The dlc member of the struct rx_msg contains also the ESD_RTR flag to
mark received RTR frames. Without the fix the can_dlc value for received
RTR frames would always be set to 8 by get_can_dlc() instead of the
received value.

Fixes: 96d8e90382dc ("can: Add driver for esd CAN-USB/2 device")
Signed-off-by: Stefan Mätje 
Signed-off-by: Marc Kleine-Budde 
Signed-off-by: Greg Kroah-Hartman

can: gs_usb: fix busy loop if no more TX context is available

2017-10-27T08:17:23+00:00

commit 97819f943063b622eca44d3644067c190dc75039 upstream.

If sending messages with no cable connected, it quickly happens that
there is no more TX context available. Then "gs_can_start_xmit()"
returns with "NETDEV_TX_BUSY" and the upper layer does retry
immediately keeping the CPU busy. To fix that issue, I moved
"atomic_dec(&dev->active_tx_urbs)" from "gs_usb_xmit_callback()" to
the TX done handling in "gs_usb_receive_bulk_callback()". Renaming
"active_tx_urbs" to "active_tx_contexts" and moving it into
"gs_[alloc|free]_tx_context()" would also make sense.

Signed-off-by: Wolfgang Grandegger 
Signed-off-by: Marc Kleine-Budde 
Signed-off-by: Greg Kroah-Hartman

net/mlx4_core: Fix VF overwrite of module param which disables DMFS on new probed PFs

2017-10-21T15:07:26+00:00

[ Upstream commit 95f1ba9a24af9769f6e20dfe9a77c863f253f311 ]

In the VF driver, module parameter mlx4_log_num_mgm_entry_size was
mistakenly overwritten -- and in a manner which overrode the
device-managed flow steering option encoded in the parameter.

log_num_mgm_entry_size is a global module parameter which
affects all ConnectX-3 PFs installed on that host.
If a VF changes log_num_mgm_entry_size, this will affect all PFs
which are probed subsequent to the change (by disabling DMFS for
those PFs).

Fixes: 3c439b5586e9 ("mlx4_core: Allow choosing flow steering mode")
Signed-off-by: Majd Dibbiny 
Reviewed-by: Jack Morgenstein 
Signed-off-by: Tariq Toukan 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

usb: plusb: Add support for PL-27A1

2017-10-08T08:11:21+00:00

[ Upstream commit 6f2aee0c0de65013333bbc26fe50c9c7b09a37f7 ]

This patch adds support for the PL-27A1 by adding the appropriate
USB ID's. This chip is used in the goobay Active USB 3.0 Data Link
and Unitek Y-3501 cables.

Signed-off-by: Roman Spychała 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

team: fix memory leaks

2017-10-08T08:11:20+00:00

[ Upstream commit 72ec0bc64b9a5d8e0efcb717abfc757746b101b7 ]

In functions team_nl_send_port_list_get() and
team_nl_send_options_get(), pointer skb keeps the return value of
nlmsg_new(). When the call to genlmsg_put() fails, the memory is not
freed(). This will result in memory leak bugs.

Fixes: 9b00cf2d1024 ("team: implement multipart netlink messages for options transfers")
Signed-off-by: Pan Bian 
Acked-by: Jiri Pirko 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

sh_eth: use correct name for ECMR_MPDE bit

2017-10-08T08:11:19+00:00

[ Upstream commit 6dcf45e514974a1ff10755015b5e06746a033e5f ]

This bit was wrongly named due to a typo, Sergei checked the SH7734/63
manuals and this bit should be named MPDE.

Suggested-by: Sergei Shtylyov 
Signed-off-by: Niklas Söderlund 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

Revert "net: phy: Correctly process PHY_HALTED in phy_stop_machine()"

2017-09-27T08:57:18+00:00

[ Upstream commit ebc8254aeae34226d0bc8fda309fd9790d4dccfe ]

This reverts commit 7ad813f208533cebfcc32d3d7474dc1677d1b09a ("net: phy:
Correctly process PHY_HALTED in phy_stop_machine()") because it is
creating the possibility for a NULL pointer dereference.

David Daney provide the following call trace and diagram of events:

When ndo_stop() is called we call:

 phy_disconnect()
    +---> phy_stop_interrupts() implies: phydev->irq = PHY_POLL;
    +---> phy_stop_machine()
    |      +---> phy_state_machine()
    |              +----> queue_delayed_work(): Work queued.
    +--->phy_detach() implies: phydev->attached_dev = NULL;

Now at a later time the queued work does:

 phy_state_machine()
    +---->netif_carrier_off(phydev->attached_dev): Oh no! It is NULL:

 CPU 12 Unable to handle kernel paging request at virtual address
0000000000000048, epc == ffffffff80de37ec, ra == ffffffff80c7c
Oops[#1]:
CPU: 12 PID: 1502 Comm: kworker/12:1 Not tainted 4.9.43-Cavium-Octeon+ #1
Workqueue: events_power_efficient phy_state_machine
task: 80000004021ed100 task.stack: 8000000409d70000
$ 0   : 0000000000000000 ffffffff84720060 0000000000000048 0000000000000004
$ 4   : 0000000000000000 0000000000000001 0000000000000004 0000000000000000
$ 8   : 0000000000000000 0000000000000000 00000000ffff98f3 0000000000000000
$12   : 8000000409d73fe0 0000000000009c00 ffffffff846547c8 000000000000af3b
$16   : 80000004096bab68 80000004096babd0 0000000000000000 80000004096ba800
$20   : 0000000000000000 0000000000000000 ffffffff81090000 0000000000000008
$24   : 0000000000000061 ffffffff808637b0
$28   : 8000000409d70000 8000000409d73cf0 80000000271bd300 ffffffff80c7804c
Hi    : 000000000000002a
Lo    : 000000000000003f
epc   : ffffffff80de37ec netif_carrier_off+0xc/0x58
ra    : ffffffff80c7804c phy_state_machine+0x48c/0x4f8
Status: 14009ce3        KX SX UX KERNEL EXL IE
Cause : 00800008 (ExcCode 02)
BadVA : 0000000000000048
PrId  : 000d9501 (Cavium Octeon III)
Modules linked in:
Process kworker/12:1 (pid: 1502, threadinfo=8000000409d70000,
task=80000004021ed100, tls=0000000000000000)
Stack : 8000000409a54000 80000004096bab68 80000000271bd300 80000000271c1e00
        0000000000000000 ffffffff808a1708 8000000409a54000 80000000271bd300
        80000000271bd320 8000000409a54030 ffffffff80ff0f00 0000000000000001
        ffffffff81090000 ffffffff808a1ac0 8000000402182080 ffffffff84650000
        8000000402182080 ffffffff84650000 ffffffff80ff0000 8000000409a54000
        ffffffff808a1970 0000000000000000 80000004099e8000 8000000402099240
        0000000000000000 ffffffff808a8598 0000000000000000 8000000408eeeb00
        8000000409a54000 00000000810a1d00 0000000000000000 8000000409d73de8
        8000000409d73de8 0000000000000088 000000000c009c00 8000000409d73e08
        8000000409d73e08 8000000402182080 ffffffff808a84d0 8000000402182080
        ...
Call Trace:
[] netif_carrier_off+0xc/0x58
[] phy_state_machine+0x48c/0x4f8
[] process_one_work+0x158/0x368
[] worker_thread+0x150/0x4c0
[] kthread+0xc8/0xe0
[] ret_from_kernel_thread+0x14/0x1c

The original motivation for this change originated from Marc Gonzales
indicating that his network driver did not have its adjust_link callback
executing with phydev->link = 0 while he was expecting it.

PHYLIB has never made any such guarantees ever because phy_stop() merely just
tells the workqueue to move into PHY_HALTED state which will happen
asynchronously.

Reported-by: Geert Uytterhoeven 
Reported-by: David Daney 
Fixes: 7ad813f20853 ("net: phy: Correctly process PHY_HALTED in phy_stop_machine()")
Signed-off-by: Florian Fainelli 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

qlge: avoid memcpy buffer overflow

2017-09-27T08:57:18+00:00

[ Upstream commit e58f95831e7468d25eb6e41f234842ecfe6f014f ]

gcc-8.0.0 (snapshot) points out that we copy a variable-length string
into a fixed length field using memcpy() with the destination length,
and that ends up copying whatever follows the string:

    inlined from 'ql_core_dump' at drivers/net/ethernet/qlogic/qlge/qlge_dbg.c:1106:2:
drivers/net/ethernet/qlogic/qlge/qlge_dbg.c:708:2: error: 'memcpy' reading 15 bytes from a region of size 14 [-Werror=stringop-overflow=]
  memcpy(seg_hdr->description, desc, (sizeof(seg_hdr->description)) - 1);

Changing it to use strncpy() will instead zero-pad the destination,
which seems to be the right thing to do here.

The bug is probably harmless, but it seems like a good idea to address
it in stable kernels as well, if only for the purpose of building with
gcc-8 without warnings.

Fixes: a61f80261306 ("qlge: Add ethtool register dump function.")
Signed-off-by: Arnd Bergmann 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

wl1251: add a missing spin_lock_init()

2017-09-07T06:32:20+00:00

commit f581a0dd744fe32b0a8805e279c59ec1ac676d60 upstream.

wl1251: add a missing spin_lock_init()

This fixes the following kernel warning:

 [ 5668.771453] BUG: spinlock bad magic on CPU#0, kworker/u2:3/9745
 [ 5668.771850]  lock: 0xce63ef20, .magic: 00000000, .owner: /-1,
 .owner_cpu: 0
 [ 5668.772277] CPU: 0 PID: 9745 Comm: kworker/u2:3 Tainted: G        W
 4.12.0-03002-gec979a4-dirty #40
 [ 5668.772796] Hardware name: Nokia RX-51 board
 [ 5668.773071] Workqueue: phy1 wl1251_irq_work
 [ 5668.773345] [] (unwind_backtrace) from []
 (show_stack+0x10/0x14)
 [ 5668.773803] [] (show_stack) from []
 (do_raw_spin_lock+0x6c/0xa0)
 [ 5668.774230] [] (do_raw_spin_lock) from []
 (_raw_spin_lock_irqsave+0x10/0x18)
 [ 5668.774658] [] (_raw_spin_lock_irqsave) from []
 (wl1251_op_tx+0x38/0x5c)
 [ 5668.775115] [] (wl1251_op_tx) from []
 (ieee80211_tx_frags+0x188/0x1c0)
 [ 5668.775543] [] (ieee80211_tx_frags) from []
 (__ieee80211_tx+0x6c/0x130)
 [ 5668.775970] [] (__ieee80211_tx) from []
 (ieee80211_tx+0xdc/0x104)
 [ 5668.776367] [] (ieee80211_tx) from []
 (__ieee80211_subif_start_xmit+0x454/0x8c8)
 [ 5668.776824] [] (__ieee80211_subif_start_xmit) from
 [] (ieee80211_subif_start_xmit+0x30/0x2fc)
 [ 5668.777343] [] (ieee80211_subif_start_xmit) from
 [] (dev_hard_start_xmit+0x80/0x118)
...

    by adding the missing spin_lock_init().

Reported-by: Pavel Machek 
Cc: Kalle Valo 
Signed-off-by: Cong Wang 
Acked-by: Pavel Machek 
Signed-off-by: Kalle Valo 
Signed-off-by: Pavel Machek 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman