linux-stable.git/drivers/net, branch v3.10.73

can: add missing initialisations in CAN related skbuffs

2015-03-26T14:00:58+00:00

commit 969439016d2cf61fef53a973d7e6d2061c3793b1 upstream.

When accessing CAN network interfaces with AF_PACKET sockets e.g. by dhclient
this can lead to a skb_under_panic due to missing skb initialisations.

Add the missing initialisations at the CAN skbuff creation times on driver
level (rx path) and in the network layer (tx path).

Reported-by: Austin Schuh 
Reported-by: Daniel Steer 
Signed-off-by: Oliver Hartkopp 
Signed-off-by: Marc Kleine-Budde 
Signed-off-by: Greg Kroah-Hartman

Revert "net: cx82310_eth: use common match macro"

2015-03-26T14:00:56+00:00

[ Upstream commit 8d006e0105978619fb472e150c88b0d49337fe2b ]

This reverts commit 11ad714b98f6d9ca0067568442afe3e70eb94845 because
it breaks cx82310_eth.

The custom USB_DEVICE_CLASS macro matches
bDeviceClass, bDeviceSubClass and bDeviceProtocol
but the common USB_DEVICE_AND_INTERFACE_INFO matches
bInterfaceClass, bInterfaceSubClass and bInterfaceProtocol instead, which are
not specified.

Signed-off-by: Ondrej Zary 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

ath5k: fix spontaneus AR5312 freezes

2015-03-18T12:22:35+00:00

commit 8bfae4f9938b6c1f033a5159febe97e441d6d526 upstream.

Sometimes while CPU have some load and ath5k doing the wireless
interface reset the whole WiSoC completely freezes. Set of tests shows
that using atomic delay function while we wait interface reset helps to
avoid such freezes.

The easiest way to reproduce this issue: create a station interface,
start continous scan with wpa_supplicant and load CPU by something. Or
just create multiple station interfaces and put them all in continous
scan.

This patch partially reverts the commit 1846ac3dbec0 ("ath5k: Use
usleep_range where possible"), which replaces initial udelay()
by usleep_range().

I do not know actual source of this issue, but all looks like that HW
freeze is caused by transaction on internal SoC bus, while wireless
block is in reset state.

Also I should note that I do not know how many chips are affected, but I
did not see this issue with chips, other than AR5312.

CC: Jiri Slaby 
CC: Nick Kossifidis 
CC: Luis R. Rodriguez 
Fixes: 1846ac3dbec0 ("ath5k: Use usleep_range where possible")
Reported-by: Christophe Prevotaux 
Tested-by: Christophe Prevotaux 
Tested-by: Eric Bree 
Signed-off-by: Sergey Ryazanov 
Signed-off-by: Kalle Valo 
Signed-off-by: Greg Kroah-Hartman

team: don't traverse port list using rcu in team_set_mac_address

2015-03-18T12:22:27+00:00

[ Upstream commit 9215f437b85da339a7dfe3db6e288637406f88b2 ]

Currently the list is traversed using rcu variant. That is not correct
since dev_set_mac_address can be called which eventually calls
rtmsg_ifinfo_build_skb and there, skb allocation can sleep. So fix this
by remove the rcu usage here.

Fixes: 3d249d4ca7 "net: introduce ethernet teaming device"
Signed-off-by: Jiri Pirko 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

usb: plusb: Add support for National Instruments host-to-host cable

2015-03-18T12:22:27+00:00

[ Upstream commit 42c972a1f390e3bc51ca1e434b7e28764992067f ]

The National Instruments USB Host-to-Host Cable is based on the Prolific
PL-25A1 chipset.  Add its VID/PID so the plusb driver will recognize it.

Signed-off-by: Ben Shelton 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

macvtap: make sure neighbour code can push ethernet header

2015-03-18T12:22:27+00:00

[ Upstream commit 2f1d8b9e8afa5a833d96afcd23abcb8cdf8d83ab ]

Brian reported crashes using IPv6 traffic with macvtap/veth combo.

I tracked the crashes in neigh_hh_output()

-> memcpy(skb->data - HH_DATA_MOD, hh->hh_data, HH_DATA_MOD);

Neighbour code assumes headroom to push Ethernet header is
at least 16 bytes.

It appears macvtap has only 14 bytes available on arches
where NET_IP_ALIGN is 0 (like x86)

Effect is a corruption of 2 bytes right before skb->head,
and possible crashes if accessing non existing memory.

This fix should also increase IPv4 performance, as paranoid code
in ip_finish_output2() wont have to call skb_realloc_headroom()

Reported-by: Brian Rak 
Tested-by: Brian Rak 
Signed-off-by: Eric Dumazet 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

team: fix possible null pointer dereference in team_handle_frame

2015-03-18T12:22:27+00:00

[ Upstream commit 57e595631904c827cfa1a0f7bbd7cc9a49da5745 ]

Currently following race is possible in team:

CPU0                                        CPU1
                                            team_port_del
                                              team_upper_dev_unlink
                                                priv_flags &= ~IFF_TEAM_PORT
team_handle_frame
  team_port_get_rcu
    team_port_exists
      priv_flags & IFF_TEAM_PORT == 0
    return NULL (instead of port got
                 from rx_handler_data)
                                              netdev_rx_handler_unregister

The thing is that the flag is removed before rx_handler is unregistered.
If team_handle_frame is called in between, team_port_exists returns 0
and team_port_get_rcu will return NULL.
So do not check the flag here. It is guaranteed by netdev_rx_handler_unregister
that team_handle_frame will always see valid rx_handler_data pointer.

Signed-off-by: Jiri Pirko 
Fixes: 3d249d4ca7d0 ("net: introduce ethernet teaming device")
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: phy: Fix verification of EEE support in phy_init_eee

2015-03-18T12:22:27+00:00

[ Upstream commit 54da5a8be3c1e924c35480eb44c6e9b275f6444e ]

phy_init_eee uses phy_find_setting(phydev->speed, phydev->duplex)
to find a valid entry in the settings array for the given speed
and duplex value. For full duplex 1000baseT, this will return
the first matching entry, which is the entry for 1000baseKX_Full.

If the phy eee does not support 1000baseKX_Full, this entry will not
match, causing phy_init_eee to fail for no good reason.

Fixes: 9a9c56cb34e6 ("net: phy: fix a bug when verify the EEE support")
Fixes: 3e7077067e80c ("phy: Expand phy speed/duplex settings array")
Cc: Giuseppe Cavallaro 
Signed-off-by: Guenter Roeck 
Acked-by: Florian Fainelli 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

iwlwifi: mvm: always use mac color zero

2015-03-06T22:40:48+00:00

commit 5523d11cc46393a1e61b7ef4a0b2d4e7ed9521e4 upstream.

We don't really need to use different mac colors when adding mac
contexts, because they're not used anywhere.  In fact, the firmware
doesn't accept 255 as a valid color, so we get into a SYSASSERT 0x3401
when we reach that.

Remove the color increment to use always zero and avoid reaching 255.

Signed-off-by: Luciano Coelho 
Reviewed-by: Johannes Berg 
Signed-off-by: Emmanuel Grumbach 
Signed-off-by: Greg Kroah-Hartman

iwlwifi: mvm: fix failure path when power_update fails in add_interface

2015-03-06T22:40:48+00:00

commit fd66fc1cafd72ddf27dbec3a5e29e99839d1bc84 upstream.

When iwl_mvm_power_update_mac() is called, we have already added the
mac context, so if this call fails we should remove the mac.

Fixes: commit e5e7aa8e2561 ('iwlwifi: mvm: refactor power code')
Signed-off-by: Luciano Coelho 
Reviewed-by: Johannes Berg 
Signed-off-by: Emmanuel Grumbach 
Signed-off-by: Greg Kroah-Hartman